If you don’t want to do the whole 10hr break in but you do want to do some sorta break in I would recommend running the engine easy for about 10 minutes or till it’s up to full temperature shut it off and let it cool down. Do that about 3 or 4 times that’s the best quickest way to do some sort of break in. I was told this by an engine builder awhile ago.

Really good video here , I think I’m gunna try to do this also my self just as a hobby and I love mini bikes thanks again

Nice build! I put a Ghost in my BT200 along with a torque converter. No fuel pump, just mounted the tank on top of the engine. I can hit 50 with it, lotsa fun!!

Wow! Such a cool bike!!

You can easily remove that top plate and that tank will mount directly to the top of the engine. Then lose the pulse pump and run a gravity line to the carb.

Best video I’ve seen ! Thank you brotha

You were turning the main jet screw, for high speed control adjustment. The idle screw is to the right, directly in line with the cable. It controls the slide

Hell yeah brother can’t wait for mine to be finished I just got a 224 predator just waiting on a clutch and some valve springs!🤘🏼

Nice video! Thanks

27:50 lmao yeah the "idle" screw got ya.. man if anyone has seen American Graffiti this makes me think of the opening scene so much. Nice demo of the motor though been on the fence about getting one. I'll be re-watching that part a few times

lol that first part when ya started it was hilarious them things engage soon as it’s running with them clutches could be scary for the younger riders first experience 🤔🤗👍

Most informative video ever bravo 👏🏻

I just put the ghost in my rt200. Working out some kinks but she rips! Got it up to 59 mph straight chained 6:1 ratio. 51mph and wheelies from a stop with the jugg on it.

Nice video and bike 👍🏼

awesome vid im doing the same exact build i think i might use your fuel tank mount idea

Awesome 👍🏼

Back in the ‘70s as a youngster I accidentally ran a few mini bikes up trees after starting them like that lol.

Nice video..👍 Thanx

Nice!!!

i just built my first 212...ported head, isky cam..they are fun as hell. The 6k limiter in that coil is trash...but a easy fix just throw a stock 212 coil on it.

Good video bro, have the same bike. Might just go the Same route, just don't like the rev limiter part. I thought that was the governor.

You need to run the muffler that header pipe was built and specs for peak performance. It want have all the torque that it should because it needs that muffler to hold the proper amount of back pressure. For as break in 1 hour tops if the rings don't seat in that time frame they never will.Also change the oil after break in. Next throw that clear line in the trash use either approved gas line or blue line.

The only problem I've found so far installing this on my bt200x is the intake manifold extension in the accessory kit makes the filter rub the rear tire

I’m not waiting 10 hrs🤣😂👍🏼.. You scored on that bike buddy..You’ll have a blast.. Finally finished mine in November ,ride it every weekend.. Great build. Nice neighborhood too. Digin all those tall green trees.Invest in a good helmet,protect your noodle..Greatings from CA✌🏼

Maybe you said it in the video and I missed it. Did you have to change your twist throttle and cable?

What's the size of the fitting that screws into the oil fill for the pulse pump?

What clutch did you put on? Is it a 3/4 for a #35 chain 10 tooth? Or is the chain #420

Mounting bolts are M8 X 35mm long

Hey! What was the clutch you got with the set screws.?!?! Need one asap

Got one for my 8 y/o this past December and the damn motor hops so much, it keeps throwing the chain!! I slid the motor up as far as it would go to tighten the chain and all it did was wear out the roller, then the chain from hitting the roller bolt! Im gonna either try some motor mount bushings or have a thicker plate welded on! I decided to buy online new in the box so i wouldn't have to mess with anything, because im lazy rather than marketplace to save a few hundo!

Is this the same frame as a doodlebug db30? I didnt think that motor would clear the rear frame bar

Did that tank come with the predator kit you have there??

how did you get the valve cover set up?

Nice

to get rid of that rev limiter just take out the sprocket for the governor on the crank

Where did you get the clutch chain and sprocket from?

Do you know where you bought the throttle cable

Put it on the cluch then put the chain on the sproket and then role it back

Need a center stand for working on it.

That motor is powerful with a tork converter get rid of the clutch.

You can make that motor go 40 to 45 mph just remove the throttle stop its a screw located at the govener linkage

A 15tooth max torque clutch with the stock 70tooth rear sprocket should get you around 60mph with that motor…

What clutch did you use for the ghost

NIce!

It would help if u kept the back wheel off the floor on a block of wood for the first time start up just in case things like that happen till u get it right, nice (mini bike) u got. My pit bike has gears, big front and rear suspension and big nobbly dirt bike tyres coz a pit bike is a smaller version of a dirt bike,motocross bike. 💯💯💯💯🤔🤔🤔🤔🤔

Where did u get ur chain tensioner from ?

hey man try swapping the rear sprocket for a 55-60 tooth youll get way better speed

For the brake in you don’t need to run it for 10hrs if you ride it with governor in your hood but if you take it out the brake in is 3 hrs with the governor in

What size throttle cable u use ?

Buddy, the fuel pump is vacuum powered. You don’t need the fuel pump if the tank is above the engine. The tank is gravity fed which means it can go straight to the carb.

What happened to break in, 6000 isn't breaking it in...Better check bearings after over reving motor. Rings never seated in, going to have blow bye. The piston probably egg shaped from excessive heat being new. I'm very familiar on the Predator 212 motor. And I always run a tank of 93 through the motor, and change oil before hammer it. Good luck on yours.

We’re did you get that clutch

I thought I was the only one who revs on start up hahahah I guess not 😂

I start new set ups with front wheel touching a wall

So dont mess with the idle screw, got it. Lol

You should have run the motor before it touched the frame or at least before it moved, to break it in.

Swap on a factory predator ign to move the rev lim

Can you get a different coil and bypass the 6000 rev limiter and if you do so is the rest of the engine capable of handing the excessive RPM besides probably needing a Flywheel to prevent It exploding on your leg LOL Would you need anything else besides that?

Can I get a link to that clutch

You have to hold the brake! and sit on it. I know it's hard but you have to do it, or that happens.

If u didn't press the throttle it wouldn't have toke off u can hear u press it twice. The fine mixture screw is or should be set to 2/2 n half turns out anticlockwise and 4/3 n half turns out max anticlockwise it's used for fine fuel adjustment, so if u have to screw it IN clockwise nearly all the way in to get it to rev up you need a smaller main fuel jet and if u have to unscrew it more thn 3 n half to 4 turns out or more to get it to rev up u need a bigger fuel jet. So whn u have the right fuel jet u can use that mixture screw for fine fuel adjustments for a smaller adjustment to get it just right, if its 4 and abit turns out and it works good go one fuel jet size bigger and reset the mixture screw to 2 n half turns out,,,, always tune an engine whn its upto temperature not whn its cold. And although the idle screw is called a idle screw it's there to set how big of a gap there is whn the throttle is let off so it stays running most smallish carbies the gap shouldn't be bigger than 2mm (check google for your carbs settings) if it is it needs a bigger starting/choke jet, 💯💯👍👊

When is part 2

i got a 212 hemi no governor pz22 racing spark plugs and exhaust it goes 41 and I'm 190... my stage 2 motor does 70 i think the ghost is a rip off you can do all the upgrades with the same 212 (reg) motor and a new carb... spend half and get the same results

I have a ghost on my professional racing gokart, literally no other four stroke can get near that kart on the track.

could you send me this project, I would like to build one here in Brazil.

How can you make a mini bike fast

The 3/4 baur clutch 10 or 12 teeth

It's not hard to remove the governor

Ghost is a 212 with a cam and higher rpm

It’s been year have your broken the engine in yet 😂

Built OVER 50 predator 212/ 10+ 224 bikes... 3hrs at idle.. broken in..

You should rotate the pull cord housing so the pull cord is facing backwards. You almost ran yourself over because you have to start it from the front of the bike.

Brother why does your garage door have so many struts on it?!

You don't need the fuel pump on a mini bike gravity feed is enuf

flip the clutch? or you can't. Engine dont move side to side?

get you a torque converter

What fuel do you use to get a 3 hp bike up to 31 mph, i have a stock coleman BT200x with 6 1/2 hp and top speed 25

PLEASE LET ME KNOW WHAT THROTTLE CABLE KIT U USED !! HAVING ISSUES FINDINGS A CABLE THATS LONG ENOUGH INTO CARB

Was that the rear sprocket or a silver pizza??😅😅

Top speed ???

With the fuel tank above the engine, you don't need a fuel pump!

Neighbors ain't gonna have that too long.

How much?

Fucking sweet e30 man.

can you put a 212 in my coleman rb100

sir how to order that predator engine? I'm frm Phillipines

Please don’t call the Ghost Engine a “fully built race engine”. It’s really not. That engine with the upgrade kit is $450. You can build a regular Predator 212cc with more HP, Torque, Higher RPM and more reliable for $450

Bro 40mph is good not garbage with the power and size of that bike i wouldn't want to go any faster 😅

You was going faster than 39 mph check it again

Why didn’t you just move the tensioner back instead of taking a link out 😂

10 minutes then ball to the ground 😂😂😂 break in.

Run a 5: 1 ratio. Top speed seems close to 63 without mods just the stock ghost 👻

(edit)_End is great! Responsive & great clutch. @02:20🧐. Super-Slow? When does the speeds value decrease from slow, blah⚠️ that's faster than any 6-9 yr old could ever pedal. Slow to you. gtg, there's always to'do. ✝️

Very easy to see he is not a mini bike guy

Need license?

You will burn that clutch up in no time if you climb some big hills 😂😂😂😂😂

Should of added shims for the clutch, those allens screws on clutch will get loose. I hqve a doodlebug db30 with 212. Has billey rod/flywheel, mod 2 cam. With a 12/70 it runs at 51 but launches hard. Now went bigger cam & going 15t clutch & just meed to port my cylinders heads & see how faster it runs.

Always remember, you brake it in how your gonna run it....

You don't floor a bike..you pin it..😅😅😅😅

Why is everybody going for these 212 get a 224 predator motor