Coleman CC100x Minibike / Twice the speed in two minutes!!
Рет қаралды 81,541
3 жыл бұрынColeman CC100x Minibike / Twice the speed in two minutes!!
Picked up a Coleman cc100x minibike. Went out and did some Zero to thirty and top speed runs with it. Was able to bypass the governor.
Coleman CC100X playlist - • Coleman CC100x Minibik...
Instagram - doubledown555Black66
Music: Luke Bergs - Tropical Soul _ Background Music No Copyright (Chill)-pP62ZVoEn2g
Song: Luke Bergs - Tropical Soul
Music by Luke Bergs:
Tropical Soul by Luke Bergs is licensed under a Creative Commons License
Music supported by #BackgroundMusicWithoutLimitations
---------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
@NVScrapper 3 жыл бұрын
Good video, I like this mini bike! Can't wait to see what you do to the bike next!
@Black66 3 жыл бұрын
Thanks grl
@benjaminyoung2403 2 жыл бұрын
Thank you for making these videos. This has really helped me plan out the upgrades on my kids mini bikes ( Baja doodlebug and a blitz)
@Black66 2 жыл бұрын
No problem ! Thanks for watching the videos !
@themincraftmelon2104 Жыл бұрын
Hey did you ever upgrade your doodlebug? Ive found one for sale but i would want it to be a little faster.
@benjaminyoung2403 Жыл бұрын
@@themincraftmelon2104 I have not finished yet I have been busy at work and haven't had time to get the kiddo's running again.
@benjaminyoung2403 Жыл бұрын
@@themincraftmelon2104 yeah I upgraded the doodle bugs. Put the 212cc motor on both. Also used a knockoff mukini style carb. It was all pretty easy.
@matthewbill8049 3 жыл бұрын
That is not a "governor" screw. It is called the throttle screw. Two totally different components on the engine. The governor on the motor is located inside the housing. Simply backing off the screw is better, as it does not damage anything, or break any part of the motor.
@trapykg 2 жыл бұрын
Thank you I was thinking hard if I should do this
@beaubrummelmotorizedbicycles 2 жыл бұрын
The "throttle limiter screw" is just that, back it out, then do a bypass on linkage. or take the side plate off and do a governor delete.
@dillonbowers8950 Жыл бұрын
@@beaubrummelmotorizedbicycles dont just bypass it on the outside you will destroy the gear on the inside and your motor from too high rpm's I know from experience
@beaubrummelmotorizedbicycles Жыл бұрын
@@dillonbowers8950 Bad luck for you. I always leave a small amount of tension on gov.gear, instead of flopping around loose. I've yet to lose a engine from gov.gear.
@glenatoreno2814 Жыл бұрын
🤓👆
@SRTluke Жыл бұрын
great vid man just got this exact model and was looking for a vid on how to remove the throttle stop for this perticular model this was the only vid i found thx
@ELTALIBANEASTLA 2 ай бұрын
Hey I was wondering how much you got yours for
@SantownRep 3 жыл бұрын
We have the same bike. I’m about to go out and take the governor screw off for my son this morning. Thanks!
@Black66 3 жыл бұрын
Awesome bike! That will make it more fun for sure!
@SantownRep 3 жыл бұрын
@@Black66 I bent the screw back, and now the minibike is waaaaaay faster! Thanks!
@Black66 3 жыл бұрын
@@SantownRep Oh sweet!! It's crazy how much faster those bikes are with that small modification. And the best part is, it doesn't cost anything to do.
@fatbuddycat 3 жыл бұрын
I hope they get the suspension forks back in. I actually got to try one of those with them and it was very nice to ride.
@Black66 3 жыл бұрын
Oh really! I didn't know they had suspension forks for these bikes. I would like to try those out.
@fatbuddycat 3 жыл бұрын
@@Black66 it's the universal ones from gopowersports.com they are out again but I bet they restock before summer. The fork in my opinion is the only downside on that frame, other than that I like them.
@Black66 3 жыл бұрын
@@fatbuddycat I'll have to check those out.
@anewman1 3 жыл бұрын
What a cool area you have for riding. It's getting harder to find somewhere to ride in Maryland.
@Black66 3 жыл бұрын
Sorry to hear that . Hopfully you can find someplace close enough. Ya, there are some places to ride here . We kinda just ride wherever , and what happens, happens lol.
@mitch3782 Жыл бұрын
A 23rd birthday present for my self 😂😂
@1809grantave 2 жыл бұрын
You rolled that stop sign….. I’m reporting you to the local police!!!😂
@Black66 2 жыл бұрын
The brakes went out!! 😳😳😳😳😀
@gloriabauer2392 3 жыл бұрын
Cool.....just like pulling teeth..lol
@thomasasuncion9438 3 жыл бұрын
Hey cool vids, I'm learning alot thanks! What's the name of speedometer app your using?
@Black66 3 жыл бұрын
Thanks! The speedo app is called DigHUD
@WhiskersTheFish 3 жыл бұрын
Doing this modification risks floating the valves and destroying the engine. If you install heavier valve springs then you can do this upgrade without much risk.
@Black66 3 жыл бұрын
Engine is still alive many months later with even more mods and swapped onto a micro bike frame . These engines are more durable than a lot of people think .
@danhallas3546 2 жыл бұрын
Who cares when you can just go to harbor freight and pick up a predator 212 for 149.99$ and it literally bolts into the stock engine mounts. I believe the only modifying you have to do is cut/grind off the rear fender mount and if you wanna put the torque converter you literally only need to prop the engine up about an inch and Ibelieve the company that makes the torque conversion kits now includes a few parts to prop it up on. Like you said it could damage it but when a new/better engine only costs 150$ it’s pretty hard not treating this stock engine as a disposable. Unfortunately that a what society has come to anymore (cheap throw away products)
@alexanderthegreatmiller8938 2 жыл бұрын
@@danhallas3546 I'm super curious what is Harbor freight? We did this exact same thing and I believe we are on the verge of blowing our motor. Could you possibly post or send a link for the predator 212 please thank you
@jayden-jsjincorporated5089 2 жыл бұрын
@@alexanderthegreatmiller8938 harbor freight is a cheap tools shop
@loki48209 Жыл бұрын
@@alexanderthegreatmiller8938 predator 212 engine on the internet for $150usd!
@feliciarivera1070 3 жыл бұрын
👍
@christopherawoznicki2046 2 жыл бұрын
If you want to make it even faster and cut that 0-30 time down I have a second mod to go with this one. I have a stock one of these that I bent the screw out of the way also, then I took the spring off the cable. If you look even in the video the spring ends up governing the engine a little. I took that spring off and the pick up is cut drastically (to the point it will do a wheelie if you try) I am 180 lbs and I clocked it at 37, bone stock aside from doing those 2 things.
@Black66 2 жыл бұрын
Thanks! Check out the playlist for this bike. Also check out the 224 playlist. Got this bike moving out pretty good with a Predator 224 kzfaq.info/get/bejne/rrmIZK2nt8-VgoU.html
@romancedennis290 Жыл бұрын
Damn really
@eliasyousef4442 7 ай бұрын
Do you cut the screw that’s on the right or the left?
@VictorianMaid99 2 жыл бұрын
When I was a child I soooooo wanted one of these but Dad said it was too dangerous.
@amsiii 3 жыл бұрын
Is this bike good as a work commutator? Or riding it through the city? Also how many miles on a full tank?
@Black66 3 жыл бұрын
Perfect bike for cruising through the city . When they are stock they are really quiet . I can’t remember exactly but I think it’s like 40 miles give or take , depending on how hard you ride it .
@mvflurry Жыл бұрын
It's a good little commuter but you might get made fun of
@rubenromero2034 3 жыл бұрын
Sweet! Aye the mini bike next to the colman, is that one faster? Can the colman go faster than the black one?
@Black66 3 жыл бұрын
Ya, the Blue minibike is faster. It has a modified Predator 212 on it.
@rubenromero2034 3 жыл бұрын
Black66 thats sick i like the frame on the blue one where can i get a bike like that
@Black66 3 жыл бұрын
@@rubenromero2034Thanks, it's an old vintage frame. I think you can get one similar to it on gokartsusa.com
@GratefulEd907 3 жыл бұрын
Thinking about getting one for my 8 year old daughter
@Black66 3 жыл бұрын
Perfect bike for a kid.
@_unknown_chosen.4436 2 жыл бұрын
I’m getting one of those soon I need a vid on how to modify it to go as fast as possible
@Black66 2 жыл бұрын
Check out the channel . I have quite a few on this bike
@dabtech7456 2 жыл бұрын
Stopping fast as possible is a good thing to try and upgrade too 😉
@jeffrykopis5468 2 жыл бұрын
Put a 212 on it immediately.
@Hesham2008A 2 жыл бұрын
@@jeffrykopis5468 212 what? I’m planning to buy one
@jeffrykopis5468 2 жыл бұрын
@@Hesham2008A Predator is cheaper, but a Duromax may be a little more durable, and a Tillotson is top shelf.
@eyehearther111 3 жыл бұрын
Predator!!!! Swap the motor from the scare chair 💺. Then let's race!! 😆
@Black66 3 жыл бұрын
Ya, we will have to do that !!
@zboom86 3 жыл бұрын
I second that! It seams much slower then the all your others.
@Black66 3 жыл бұрын
@@zboom86 ya your right. It needs a predator!👍
@gloriabauer5019 3 жыл бұрын
OH yeah ...it's a lot faster....now I think you should paint flames on it...lol
@eyehearther111 3 жыл бұрын
Flames for sure. Thatd look badass 😎
@Black66 3 жыл бұрын
Ya, good idea!!!
@908__jay6 3 жыл бұрын
I'd recommend taking that spring off I did on mine and it went wayyy faster it hits 42 just by taking that off bc it's stops it from going all the way the lever
@Black66 3 жыл бұрын
Check out my other videos on this bike . I got it to over 60 with a few mild mods … ok maybe not that mild lol 😂
@908__jay6 3 жыл бұрын
@@Black66 wow 😳
@jack_-is7rv 2 жыл бұрын
how do you take the spring off and does it do any damage?
@christopherawoznicki2046 2 жыл бұрын
@@jack_-is7rv the spring is on the end of the cable, lossen the screw that holds the cable and slip the spring off nd put the cable back in. Doing this I have noticed makes it much faster but also gets the clutch fully engaged way sooner also.
@romancedennis290 Жыл бұрын
@@christopherawoznicki2046 how do I do it on a ct100u bro
@its_a_lexus4569 2 жыл бұрын
I bought one a couple months ago and just realized it was lowered
@Black66 2 жыл бұрын
Oh really! That might be a good thing.
@elias4618 2 жыл бұрын
hey black how long does it run for 2 hours of top speed driving or 1 ?
@Black66 2 жыл бұрын
Not sure. I haven't tested that.
@ercushkakulmetov7458 2 жыл бұрын
I noticed you live in the southwest. Do you get flats and issues with goatheads? How thick are the tires on this?
@Black66 2 жыл бұрын
The tires are decent. I haven't had any issues . If you look at the playlist on this bike you will see that we mainly ride on the street though . If we do go off road its usually on trails .
@johnk6346 3 жыл бұрын
That is stupid that they put the governor screw on the engine in the first place
@Black66 3 жыл бұрын
That's true !
@diztince-471 3 жыл бұрын
hey @black66 when i hit top speed it cut out . Like i have to stop then go again is there anyway i can stop it without taking the governor out ?
@Black66 3 жыл бұрын
Yes, I made a video to fix that problem. Here is the link kzfaq.info/get/bejne/bNpdZb2n0J2-XWg.html
@beaubrummelmotorizedbicycles 2 жыл бұрын
You probably reached a point where engine rpm's were high enough to cause "valve float" . These engines are rated at 3600rpm, with a gov.bypass or delete they spin up to 5500 and that is where the valves start to float causing engine to cut out.
@ratoneJR 2 жыл бұрын
The cc100x uses a #35 chain, right? when you put a 212 on it, did you change to a 420 chain? 35 chain can't take much HP.
@Black66 2 жыл бұрын
Yes, it has 35 chains. I used 35 chain on this bike. If I get into the higher power stuff I usually use RLV Extreme performance Gold on Black or gold on gold 35 chain. It handles the power really well. www.ombwarehouse.com/-35-rlv-x-treme-high-performance-chain-120-links.html?gclid=CjwKCAiAgbiQBhAHEiwAuQ6BkmAFEmuI2wLoojo0EnhsiJvdRICiwa0e96HeoVu0bDvrCOJRE8X91RoClfQQAvD_BwE
@ratoneJR 2 жыл бұрын
Thanks very much for that info. Is there any performance difference between the 2? Or is it only cosmetic?
@SportssWarehouse 3 жыл бұрын
Do you think it is a big risk to remove the governor, I want to do it but my friends and family keep telling me if i remove it the engine is not gonna last me long. But I want it to hit 30
@Black66 3 жыл бұрын
Any engine can break but as long as you keep the oil clean and don't run it wide open all the time it should last a long time. I haven't had any problems so far.
@SportssWarehouse 3 жыл бұрын
@@Black66 thank you, I had such a hard time trying to figure out what to do
@nsxnthony Жыл бұрын
I am thinking of getting this but I don't know if it can handle being used everyday. I go back and forth from home about 6 times (home to school, school to home, home to internship, internship to home, home to my job, job back to home). I ride my bicycle about 6.6 miles everyday so I just need something that can do all the moving for me, my legs are dead from pedaling. I am just wondering if this bike would be able to handle it.
@LifeLongBruhGamer Жыл бұрын
more than likely, i haven't tested mine for exact mileage but the original channel said about 40 miles to a tank. could do some googling too
@WeusRehl 2 ай бұрын
Trust me it’ll get there nd back
@diztince-471 3 жыл бұрын
Hey black66 my coleman cc100x won’t start can you tell me why it won’t start. I look up videos and I couldn’t find anything. I made sure it had gas , the choke is on , kill switch on . I dont know what else. Think you can tell me what wrong with it .
@Black66 3 жыл бұрын
If it’s getting fuel , make sure it’s getting spark . You could pull the plug and ground it against the head and then pull the string to make sure it’s sparking . Just to make sure the kill switch isn’t grounded out and to make sure the plug is good . If it is getting spark the carb could be dirty . Make sure the air filter is clean .
@diztince-471 3 жыл бұрын
@@Black66 how can i clean the air filter?
@Black66 3 жыл бұрын
@@diztince-471 The foam filters you can clean by using some dish soap and warm water to get the oil and dirt out of it . Squeeze it out Let her dry . Clean up any dirt in the housing too .
@fahmi1347 3 жыл бұрын
Hey how is it riding through the neighborhood? Is it loud?
@Black66 3 жыл бұрын
The three horse engine on the Coleman bike is quieter then a Predator . It’s not bad .
@fahmi1347 3 жыл бұрын
@@Black66 Thanks for replying. Would removing the Governor cause it to overev?
@Black66 3 жыл бұрын
@@fahmi1347 They are pretty durable engines. I haven't had a problem yet, and you see how I ride mine LOL Keep the oil clean and it should last a long time. But with that being said, anything can break.
@fahmi1347 3 жыл бұрын
@@Black66 Thank you so much! Im about to buy one
@Black66 3 жыл бұрын
@@fahmi1347 They are nice bikes !
@wsEchoPark213 3 жыл бұрын
That’s so cool and thinking about getting me one and modify it to at least 50mph
@Black66 3 жыл бұрын
Do it! This is definitely a good bike to modify. I like that the bike itself is not that expensive to start with.
@thomasscottjr728 2 жыл бұрын
Where do I get most of those parts to upgrade my mini bike to
@Black66 2 жыл бұрын
I get parts from a lot of different sources. eBay, Amazon, OMB warehouse, Studz racing, BMI karts, go power sports, etc. I put links in the description on some of my videos.
@limjahey2891 3 жыл бұрын
I'm 5 foot 8 how is the rideabilty of it ? Like uncomfortable or ?
@Black66 3 жыл бұрын
I'm 5 foot 7 . It's a really comfortable bike for my height. I really like it. Its alot more comfortable than my blue bike that's on this channel.
@Slicknewt 3 жыл бұрын
How do you do a 0-30 run on a bike that does like 18 mph stock lol
@Black66 3 жыл бұрын
You make it go faster than 18 mph .
@Slicknewt 3 жыл бұрын
You did that before doing anything is what i meant
@medacolden3698 3 жыл бұрын
Is this a new one or same bike?
@Black66 3 жыл бұрын
It's a new bike .
@froggert119 Жыл бұрын
You took the plastic limiter gear out RIGHT? if you don't it'll shatter at high rpm and destroy the engine. They all have them, take it out
@Black66 Жыл бұрын
Check out the micro bike playlist and also the CC100x playlist for all the modifications and parts swaps this engine. kzfaq.info/get/bejne/eq9xg5yfyL2pdZ8.html
@nxtarfac3246 8 ай бұрын
Hey man I tried this but then the gas started leaking out of where the yellow speed changer thing is next to the pull start
@LifeLongBruhGamer 2 ай бұрын
your carb was leaking
@ebaadghanchi1729 2 жыл бұрын
Does it Actually work because I just ordered mine and I want to try
@Black66 2 жыл бұрын
It works awesome! Best easy mod
@ebaadghanchi1729 2 жыл бұрын
@@Black66 thx I’ll let you know Friday
@joesena913 3 жыл бұрын
It looks like the high desert.
@Black66 3 жыл бұрын
Ya, It's up here in Kingman Arizona .
@joesena913 3 жыл бұрын
@@Black66 orale
@lilrabbi2701 3 жыл бұрын
I’m 5’7 and 170 pounds do you think it’s rideable for a guy my size?
@satan1189 3 жыл бұрын
Youre not tall so yes
@mglando 3 жыл бұрын
Yes I’m like 6”2 and 170 and it was a little uncomfortable but I hit 40 on mine
@Th4t_0n3_guy 11 ай бұрын
I'm 5'10 240pounds and rides completely fine
@cholorep Жыл бұрын
What speedometer app are you using?
@Black66 Жыл бұрын
I use digiHUD on the phone for top speed and a Dragy performance meter for 0 to 30
@cholorep Жыл бұрын
@@Black66 thank you. Your videos are awesome!
@Black66 Жыл бұрын
@@cholorep Thanks!
@bilgerat2635 2 жыл бұрын
Im 5,10 do u recommend me buying this or the ct100u?
@Black66 2 жыл бұрын
They are both small. I like this one. The seating position on this is more comfortable to me.
@bilgerat2635 2 жыл бұрын
@@Black66 so if I would get this one would it be fine for me a 5,10 rider
@Black66 2 жыл бұрын
@@bilgerat2635 I'm 5'7, it's comfortable for me. The CT100U is very small also. I think either would work. The difference to me is on the CC100X it feels more like you are riding down a little lower on the frame and the CT100U feels more like your riding on top of the frame. Kind of a different feel.
@GymBoy761 3 жыл бұрын
@black66 do I risk blowing the engine doing this?
@GymBoy761 3 жыл бұрын
@Black66
@Black66 3 жыл бұрын
We haven’t had any problems out of this one yet ,It’s pretty durable . Although any engine can come apart .
@Spacecruizer203 3 жыл бұрын
whats dif from this and the rt 100 the camo one
@Black66 3 жыл бұрын
I've never owned an RT 100 but they look like they are similar in size. One has a 105cc engine and the other a 98cc. They both have disc brakes. Any bike like this is easily modified so maybe it boils down to personal preference on the frame design and which engine you like better. Looks like it would be a fun bike.
@Spacecruizer203 3 жыл бұрын
@@Black66 the 212 engine is only 100 bucks
@Black66 3 жыл бұрын
@@Spacecruizer203 Ya, exactly, so I guess it would boil down to what frame you like better. A 212 would make it a beast.
@Spacecruizer203 3 жыл бұрын
@@Black66 i mean Frame wise is it a good frame to start a build with will it fit the x18 wheels
@Black66 3 жыл бұрын
@@Spacecruizer203 Im not sure. I would have to look at that. I really do like the frame.
@l.a.m7645 2 жыл бұрын
Can you slap a 212 hemi on that small bike?
@Black66 2 жыл бұрын
Yes! I have and many other combs. Check out the CC100X Predator 212 playlist and other playlist on the channel. Thanks for watching! kzfaq.info/get/bejne/qrCVqNNqx9WRp6M.html
@TeleCaster66 3 жыл бұрын
Doesn't this float the valves?
@Black66 3 жыл бұрын
Surprisingly it seemed to run good up to 40 mph. I think anything to far beyond that might float the valves.
@TeleCaster66 3 жыл бұрын
@@Black66 I was going to do this to mine but was afraid of ruining the engine.
@Black66 3 жыл бұрын
@@TeleCaster66 it's nice to have the extra power. You don't have to run it hard all the time.
@TeleCaster66 3 жыл бұрын
@@Black66 True. As a kid my friends and I had mini bikes (40 years ago) and we always removed the governor linkage and never had a problem. I think I'll do it again. Torque converter is in the mail and will go on next week! I'm still a kid at heart...
@Black66 3 жыл бұрын
@@TeleCaster66 That is awesome ! I remember those Briggs and Stratton days back in the 80's for me. A torque converter will be awesome for that bike.
@klay1ko 2 жыл бұрын
What type of bike chain that is
@Black66 2 жыл бұрын
Standard 35 minibike chain
@user-wt7rh2rw8g 10 ай бұрын
Hey,why didnt you just unscew it?😊
@diztince-471 3 жыл бұрын
Do you think I should get it ?
@Black66 3 жыл бұрын
Ya, it's a nice bike. As long as your not wanting a bike that is really fast. It's a good cruising around bike . And later if you did want it to go fast, you could always put a predator 212 on it.
@diztince-471 3 жыл бұрын
@@Black66 would if add a exhaust and air filter would it pick up some more speed. I’m just try to ride around the neighborhood with my friends.
@Black66 3 жыл бұрын
@@diztince-471 Yes , that would add some performance. I think if you did exhaust and filter mod with the governor screw removed , im pretty sure it would do over 40. . I have a video coming out on Wednesday. I added a performance filter.
@Black66 3 жыл бұрын
The video is on Saturday . Not Wednesday
@diztince-471 3 жыл бұрын
@@Black66 okay how much they cost?
@Slicknewt 3 жыл бұрын
Throttle stopper isnt the governor
@Black66 3 жыл бұрын
Ya, I know, it's just part of the mechanism.
@Black66 3 жыл бұрын
The throttle stop screw does have something to do with governing the speed of the bike. So techniquely it's a governor.
@Slicknewt 3 жыл бұрын
Yeah it does make a huge difference. The actual governor is in the engine though but removing that without adding performance parts is just risking valve float. On my coleman I just bent the throttle limiter screw out of the way and drilled some small holes in the airbox but it made a pretty big difference, about 25 mph though not 30 i wish
@Black66 3 жыл бұрын
@@Slicknewt ya. I'm going to make a video on removing the internal governor parts .
@Black66 3 жыл бұрын
@@Slicknewt in my video coming out on Saturday, I get the Colman bike to over 40 MPH. It runs awesome at 40 !
@hattratt1458 Жыл бұрын
See my neighbor completely bent that S true and now my bike goes 28 mph But I'm thinking about making it go faster
@Black66 Жыл бұрын
Check out the playlist. We made it go quite a bit faster.
@hattratt1458 Жыл бұрын
@@Black66 Yeah I saw that I was thinking about doing that To mine
@hattratt1458 Жыл бұрын
@@Black66 See the only problem I have With mine This is my neighbor did the breaks because they went out within a week And we noticed the brakes were filled with mud So he said to me next time I do this for you You are going to pay me And I'm like I'm not paying you nothing you're my friend that's what friends are for But obviously hes not a true friend So he said when he was taking the brakes off don't lose this little pin And my bricks went out a couple days later So I took them off and I lost the pin So now I got my bike to go 29 miles per hour So now I'm sitting here writing it with no Breaks So yeah that's the only thing wrong with mine Right now
@jeffrykopis5468 2 жыл бұрын
You're using the terms "governor" and "throttle stop" interchangeably. They're not the same thing.
@jeffrykopis5468 2 жыл бұрын
@@Black66 I know, I've been binge watching ya for 3 days now. They both "govern" engine speed, I'll give ya that.
@carterharrison1042 2 жыл бұрын
I have one and my chain always falls off
@Black66 2 жыл бұрын
Make sure its in alignment and tight enough. It should have around an inch of play
@edmondwatson8153 2 жыл бұрын
Never did top speed
@Player-nx2pr 2 жыл бұрын
Could have just taken the screw out with a Philips.
@Black66 2 жыл бұрын
No, it was welded on
@america_has_fallen2311 Жыл бұрын
Lies!! Obviously no where near twice
@Black66 Жыл бұрын
Man! Can't get nothing by you!! 👍👍😁
@acejanes5395 2 жыл бұрын
fortnite
@Black66 2 жыл бұрын
isn't that a video game?