Coleman CT200U-EX with 60 tooth sprocket goes 60 MPH?

Рет қаралды 37,229

Жыл бұрын

Coleman CT200U-EX with 60-tooth sprocket goes 60 MPH?
Installed a 60-tooth sprocket and a 10-tooth clutch on the Predator 212-powered Coleman CT200U-EX minibike to see if it would do 60 MPH.
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Parts used -
____________________________________________________________
ARC.020 billet rod - www.arcracing.com/6256-billet...
Slipstream billet flywheel - www.gopowersports.com/sk200-
GX 160 head - www.amazon.com/gp/product/B01...
VM22 Mikuni carburetor - www.amazon.com/gp/product/B07...
Header pipe - www.ebay.com/itm/273555452026...
3/4 shaft clutch - www.ebay.com/itm/313092339316...
Riser mount - www.ebay.com/itm/153979950963
Header pipe - www.gopowersports.com/header-...
Subscribe for more minibike content: kzfaq.infofea...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Пікірлер: 127

@andrewkuhtz Жыл бұрын

Sweet video Black 66! I have the same bike, setup the same way but with a mild built 224, nibbi, and 20” tires. Havent done a top speed yet, still breaking in the motor. But it does 50mph no problem at lower rpms lol.

@Black66 Жыл бұрын

Thanks! That bike should fly with the 224!

@troy22nd Жыл бұрын

224 Predator?

@andrewkuhtz Жыл бұрын

@@troy22nd yes, mild built. Governor removal, thin head hasket, 3910x plug, vm22 mikuni carb and header pipe…

@troy22nd Жыл бұрын

@@andrewkuhtz it's not unsafe to ride with that governor removal?

@andrewkuhtz Жыл бұрын

@@troy22nd sorry, forgot to add it also has a tilly 212r cast aluminum flywheel…safe for 5-6k rpms depending how far u wanna push it on a stock rod…

@keithcola3906 Жыл бұрын

I remember when u got this bike I had just got mine like a week before. Love seeing how far u have come. Keep up the good energy we all need it👍🏾

@Black66 Жыл бұрын

Yes we do, thank you!

@itzyaboi8897 2 ай бұрын

Just bought a 60T sprocket and 10 on the clutch… can’t wait. Great video

@Spacecruizer203 Жыл бұрын

idk what it is but i love the sound of the flywheel being lapped really makes me wanna speed up my build and keep this dream PoPin

@ronleeedmondson2757 Жыл бұрын

I wanted to Iet you know how much I enjoy your content. I also like other channels like Cars and Cameras, Red Beards Garage etc... But your content seems more realistic for the average person. I'd like to see you do a project on building a very reliable bike while still having a little spice for fun.

@sylviaterrazas4022 Жыл бұрын

Black66 got hacked he did not make this reply

@charliespann3967 Жыл бұрын

Another great video, thanks. I hate to be a pain but where did you get you tec. aluminum flywheel? Thanks again and keep up the great work.

@ManuelRodriguez-tr8bw Жыл бұрын

Kool bike n Fast

@oldcult317 Жыл бұрын

Very cool!!!

@samsgarage1716 Жыл бұрын

Good job the bike is fast

@paulluffman519 Жыл бұрын

Thank you for the video. I just bought one and put a built Tillotson 212 on it. It definitely smokes the clutch on a five to one gear ratio. Going to go with six to one gear ratio. Probably end up putting a torque converter on it. It is running 64 mph now. I will probably gain speed. You have to have a long road to get up to 64 mph

@Black66 Жыл бұрын

Awesome! Fun bike . I really like the Tillotson 212.

@paulluffman519 Жыл бұрын

@@Black66 would you please send a link to the 60 tooth sprocket. Thank you for your videos and knowledge. Watching your videos, I was able to build my own engine.

@troy22nd Жыл бұрын

Do you ever run the jack shaft system, and why or why not? In your opinion what's the best system, jack shaft, torque converter, or straight chain?

@l.a.m7645 Жыл бұрын

You have link for that thing that holds the shaft when tightening the flywheel?

@paolo.c6591 Жыл бұрын

Grande fratello,

@FreeRunMonster802 Жыл бұрын

Would love to see you make a torque converter setup as fast as possible, maybe bring the baja warrior back?

@Aaron-L Жыл бұрын

Great videos bro. I am thinking of doing a build with the Predator ghost motor. Would you recommend the CT200 or the BT200 frame to start with, I know the CT is a bit lighter? Or something else? For my first I really want something that has all the other parts already. Thx

@Black66 Жыл бұрын

I think it boils down to personal preference. I personally like the CT better because of seating position. It feels like you ride lower on the CT. The BT to me feels like you are riding higher on top of the frame. The BT is made from that nice thick tubing, so it is a good bike. They both would make a good bike.

@crybabylocr4012 Жыл бұрын

Cool I just ordered mine 😢ima try it I need you to upload a full vid on install mikunic carb don't get linkage part???

@davidcontreras3194 Жыл бұрын

Hey I need help with my noram clutch and what size rear sprocket do I use

@chilldad3740 7 ай бұрын

Live your channel. Would a 14tooth clutch and a 60tooth rear sprocket work? If so, more power or less power?

@user-pc6fn1tl3e 9 ай бұрын

Thx!!

@wolfgang-sb4wm Жыл бұрын

Dude i love your body kit where can i find it

@carnivorecave Жыл бұрын

Those clutches can be modified for a racing set up...Just by cutting the pads making 4 pads and clipping the spring...Making the clutch open later so you can get the rpm's up to launch the bike out of the hole...

@saidlara720 Жыл бұрын

clip the spring w what

@PopeMcGrope Жыл бұрын

Make a 8-9 shoe/pad clutch and snip 2/3 rings off the spring. No more than that or the spring won’t go back in.

@crybabylocr4012 Жыл бұрын

Best bikes trust me I've seen alot

@jeremiahmcdaniels9915 8 ай бұрын

If I build my ct200u-ex to go 90mph what’s the best gearing for that size bike ?

@lyriclemons7459 Жыл бұрын

What do you mean by straight chain can someone explain

@paulluffman519 Жыл бұрын

I put a 60 tooth on mine, had to buy a pre stretch motorcycle number 420 chain. The regular chain would rip into. I weigh almost 200.

@user-pe8gn3cd1f Жыл бұрын

I'm running a 10 tooth clutch and 60 tooth rear. I thought about buying a 15 or 17 in tire and putting a 50 tooth sprocket on it. Or putting a 20in tire on it. I can cruise over 60 now with no problems. I don't want to lose any speed or power. I'm running a 19 tire now. I'm thinking a 20in tire will be way too much of a strain on the clutch. Does anyone know if you can use a 50 tooth rear sprocket on a 17 or 15 in tire without losing speed. Thank you so much for your videos . Any suggestions about tire size and rear sprocket would be greatly appreciated. Thank you.

@cordovaar Жыл бұрын

I have a coleman CT200u-ex built 224 flattop piston, billet rod, hot 275 cam, 28lb springs, champion rockers, and a 10,000 rpm flywheel VM22 Chinese knockoff carb. bike has original gearing i cant get it over 38mph . at full throttle it bogs/ cuts out. runs good at full throttle until about 25 mph then i have to back off to a little over half throttle. looking for any advise on understanding what I am doing wrong

@Yllivan100 Жыл бұрын

Are you running the jackshaft Because I have the same motor stage 1 with the cvt and it goes 40 mph

@dylanfontenot2840 Жыл бұрын

I have the same bike and was wondering if you need a billet flywheel to make it go that fast bc I don’t want it blowing up on my lmk please.

@72151 4 ай бұрын

With the higher rpm’s, better off with the billet flywheel. The factory one will crack and come apart

@user-pc6fn1tl3e 9 ай бұрын

Do u have a vid on the rear hydraulic brake set up on the ct200u-ex?

@Black66 9 ай бұрын

Yes, its in the CT200U-EX playlist kzfaq.info/get/bejne/oK6WbNx70se-fHU.html

@litnlarry 9 ай бұрын

Hi black. No chain tensioner? I’d be worried about chain stretch and coming off. You must use a high quality chain.

@Black66 9 ай бұрын

Check out the CT200U-EX playlist, Usually the combos stay on these bikes for a few videos and then they are swapped out to try something else. I use Renthal chain whenever I can. it is awesome! kzfaq.info/get/bejne/oK6WbNx70se-fHU.html

@iversonjimenez5814 8 ай бұрын

What spray was that?

@GoodFellasMiniBikez-GFMB 11 ай бұрын

So if you had more power I feel like the 6 to 1 ratio would work better right? For top speed?

@Black66 11 ай бұрын

I look at gearing like in this video...Check it out kzfaq.info/get/bejne/rrxonJhqxq25kaM.html

@ViperX260 23 күн бұрын

I have the same bike and same set up. Im hitting 60mph but my rear tire is really loud. I was told those stock tires can't handle any speed over 40.

@JNC1973 Жыл бұрын

I've always sucked at understanding how the ratios work but I just swapped out my stock 50 tooth for a lower 46 tooth just cause with the 50 tooth i was hitting 50 mph on the dot and i wanted to get over that 50 mph mark and figured a 46 tooth would do the job. I had no idea a larger tooth sprocket like a 60 tooth would be able to go just as fast as a 50 tooth or even faster. If we were neighbors I'd just pay you to set my bike up to do 60 and keep the torque at the same time. I gotta 265 Cam in mine as well but never saw 60 mph that's for sure lol. Also I originally planned on putting a 8 or 9 tooth sprocket on the front to keep some of the torque with that 46 tooth sprocket but i can't get them to fit on the jackshaft. Only the 10 tooth or higher will fit on it.

@Black66 Жыл бұрын

Usually a smaller sprocket will get you more top speed. But some of the time the engine just cant pull the higher gear if the ratio is to tall or the rider is heavier or if the cam doesnt make power until it gets up into the higher RPM band and the engine wont get there because of the higher gear.

@JNC1973 Жыл бұрын

@@Black66 Ok so lets say I have the SUper X Grind 265 Cam and have a 46 tooth in the rear and a 10 tooth on front with Torque Converter. Figure i weigh like 175 ish. In your mind would you expect that 196cc bike to be able to pull me from a dead stop up to it's top speed or would it have trouble getting off the line with that set up? Also do you happen to know if the typical 196cc mb200s have 5/8'' jackshafts ? If so why won't my 5/8'' 9 or 8 tooth c type sprockets fit on it ? If i can't get them to fit even after shaving off some metal i may have no choice but to put the 50 tooth back on.

@Black66 Жыл бұрын

@@JNC1973 A lot of the 196 engines have a 16mm shaft, not a 5/8 . They do have an adapter you can use to make a 3/4 shaft clutch work. I have quite a few videos on that on the playlist. A torque converter will usually limit top speed but geared right you can still get some good speed out of one.

@JesusLopez-ek7bm Жыл бұрын

Do u know where I can buy some new fork I can’t seem to find the right size on eBay or Amazon

@Black66 Жыл бұрын

Yes, GoPowerSports has forks for these bikes.

@PYROtheNomad Жыл бұрын

How long before my stock hisun 196 with a carb jet and straight chain blows up going 50+ mph?

@Black66 Жыл бұрын

I has a predator 212 on it now with all the billet parts. Check out the CT200U-EX playlist for more combos with this bike. Thanks for watching! kzfaq.info/get/bejne/jpaDoKSLr5zVh2w.html

@qvsus 29 күн бұрын

Wha size chain is tha I got a 50 tooth n I bought a 35 chain n it’s too small

@cooper4783 Жыл бұрын

Hey black66, i just installed a performance air filter on my mini bike, is it ok to have a performance air filter without a aftermarket exhaust?

@Chevy_Guy Жыл бұрын

Do the wheel bearings hold up to the higher speeds?

@Black66 Жыл бұрын

So far so good. No issues yet...

@BizWiz Жыл бұрын

Hey black , are you going to do a vid on the duromax dual fuel engine ?

@Black66 Жыл бұрын

I haven't thought about it . Thanks for the idea!

@BizWiz Жыл бұрын

@@Black66 absolutely man , I just think with your skill set , and there is no videos really , it would be cool man ..

@AdrianGarcia-tz1yx 8 ай бұрын

Would a 12t clutch and 60t rear sprocket work and what would be the top speed ?

@AdrianGarcia-tz1yx 7 ай бұрын

@alexanderpapii4866 10 ай бұрын

I want to run a 12t 60 sprocket what chain would I need? #35 or #40?

@neillameier8644 8 ай бұрын

the chain that matches the tooth of the sprocket you buy, if anyone else is wondering, you prob figured it out by now.

@junebugg420x2 Жыл бұрын

What app do you use to measure your 0-30??

@Black66 Жыл бұрын

I use a Dragy performance meter for 0 to 30

@junebugg420x2 Жыл бұрын

@@Black66 thank you!

@marquezdaniel9496 8 ай бұрын

Where can you buy 60t sprocket???

@Black66 8 ай бұрын

GoPowerSports has the 60 sprocket. If they are out you could also get it here www.amazon.com/Sprocket-Coleman-CT200U-EX-Warrior-Powersports/dp/B0BNB582CS/ref=sr_1_6?keywords=420+sprocket&qid=1700586829&sr=8-6

@nova5083 Жыл бұрын

😎

@royleemelendez7430 8 ай бұрын

Can you link the brake kit can’t find it anywhere

@Black66 8 ай бұрын

The links are in the description of the brake install video. Check out the CT200U-EX playlist .kzfaq.info/get/bejne/m66Rq5x8vqmUqKM.html

@royleemelendez7430 8 ай бұрын

Thanks love your videos big inspiration keep them coming.

@nova5083 Жыл бұрын

my bike goes around 40 mph, I have an amazon torque converter, custom huge green handlebars, gopowersports race exhaust, an RLV muffler, header support, a cover for it all

@nova5083 Жыл бұрын

im planning on getting new tires for the coleman ct200u ex, what do you recommened? :)

@andrewkuhtz Жыл бұрын

@@nova5083 the 20” sunf A021 tires are a really nice all purpose tire. I love mine.

@nova5083 Жыл бұрын

@@andrewkuhtz awesome!

@joeyornelas4316 Жыл бұрын

Any cam it it?

@Black66 Жыл бұрын

Ya, it has a superman series 265.

@Sim_racer_40oz Жыл бұрын

😂 you need an super light frame now

@Black66 Жыл бұрын

Yes, to go along with my super light frame ! Lol

@Spacecruizer203 Жыл бұрын

60 for 60 thats a fair exchange for shore 199%

@neighborhoodcrime148 Жыл бұрын

I’m still wondering how you went 60 with the gear ratio. Same modes I’m not there yet lol but again your a pro I’m a rookie. Haha just trying to figure things out as I go along with my day.

@Black66 Жыл бұрын

My weight might have something to do with it.

@damarcruscousin1824 Жыл бұрын

What pipe is it

@Black66 Жыл бұрын

The new link for the header pipe is in the description of the video.

@damarcruscousin1824 Жыл бұрын

@@Black66thanks man love your vids if u suggested any street tires which ones should i get i have a colman ct200uex

@markfillingim3686 Жыл бұрын

How hot did the clutch get..

@Black66 Жыл бұрын

Not to hot because of the big sprocket,lower gear ratio . And I'm pretty light .

@markfillingim3686 Жыл бұрын

Guess I'm too heavy ,mine boils

@markfillingim3686 Жыл бұрын

Torque converter is in order..lol

@Black66 Жыл бұрын

Check out the CT200U-EX playlist. We have tried many different combos on this bike. They keep the same combo for about five minutes before we are trying something new. LOLkzfaq.info/get/bejne/jpaDoKSLr5zVh2w.html

@sarahyoung8153 Жыл бұрын

Can you give some advice to a 60year woman who has taken off the torque converter....just want a chain and to go slow.

@Black66 Жыл бұрын

A big rear sprocket, like a 60 or bigger will make the clutch last longer on these big tire bikes with a straight chain.

@mouse6595 Жыл бұрын

Make a video, making a moto 80 with a stock predator 212

@mouse6595 Жыл бұрын

@@Black66 Do you know, can a moto 80 frame fit a predator 212 stock?

@Black66 Жыл бұрын

@@mouse6595 Yes it will. You have to drill holes in the engine plate and trim a few things if you don't use an engine plate but it will go on there pretty easy.

@mouse6595 Жыл бұрын

@@Black66 ah thats nice because so far I've only seen 2 methods:1st one was to get a riser plate or whatever their called, and the second was to cut off one of the oil draining bolts to make it fit, because its a smaller frame.

@Black66 Жыл бұрын

@@mouse6595 Yes, you can use a riser plate so you don't have to trim the plug . Trimming the plug is easy to do if you don't have the plate. Easy swap.

@mouse6595 Жыл бұрын

@@Black66 yeah I think its easier to trim the plug because the plates cost i think around 70$.

@parabellumgunner7 2 ай бұрын

Mines goes 55 on stock 50

@Golgo13k Жыл бұрын

See I always see you doing street stuff why not give it a try off road Ive done nine miles full pull and the engine not float or choke and off road of 8% - 11% grade hill

@neighborhoodcrime148 Жыл бұрын

Nvm this is the predator 212 lol

@Black66 Жыл бұрын

Oh, you are running the 196