2017-2018-2019Ford F-250 6.7 Diesel High idle with upfitters.

Рет қаралды 67,233

6 жыл бұрын

How to video about wiring up 2017-2018 f250 6.7 for high idle using the upfitter switches.
Pin #7 yellow and green to pass threw, to the upfitter switch.
Green wire and white with brown strip wires #9 and #10, wire them together with resistor.
CHANNEL SUPPORT - buymealatte.com
High idle resistors - amzn.to/2QWZ6FS
Business/Good ole boy email - coltshinton@gmail.com
Some of Gear i have on my truck
2017-2019 F250 & F350 Air Lift LoadLifter 5000 Ultimate Air Spring Kit 88399 -bit.ly/3FqxFLn
Weigh Safe 8-Inch Drop Hitch w/ Built-In Scale - 2.5" Shaft WS8-2.5 - bit.ly/3qMMu6Q
Weigh Safe 6-Inch Drop Hitch w/ Built-In Scale - 2.5" Shaft WS6-2.5 - bit.ly/3kLZ1nb
Mob Armor MobNetic Pro 90 Smartphone Mount MOBN-PRO-BLK - bit.ly/3Ft3m70
37x12.50R20LT Nitto Ridge Grappler M/T-A/T Hybrid Radial Tire NIT217-030 - bit.ly/3np336G
2017-2021 F250 & F350 4WD Ready Lift 2.5" Front Leveling Kit w/ Track Bar Relocation Bracket 66-2726 - bit.ly/3oJbfOW
2017-2022 F250 & F350 Husky Rear Wheel Well Guards 79131 -bit.ly/3DmPhHo
2009-2019 F150 & Super Duty BuiltRight Rear Seat Release with Olive Strap 100115 - bit.ly/3Fo6Gjr
Rigid Industries Dually Pro LED Light - Spot - Single 201213 - bit.ly/3kO1jT3
Rigid Industries SR-M Pro White Diffused Off-Road LED Light 902513 - bit.ly/30A4mqr
THE GOODS - amzn.to/3kLToG1
AFFILIATE DISCLAIMER: This video contains affiliate links in the description, which means that if you click one of the product links, I’ll receive a small commission. I am a participant in the Stage3 motorsports and Amazon Services Associates Program, which are affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking products to them. This helps support the channel and allows me to continue to make videos like this. Thanks for your support!!

Пікірлер: 196

@COLTSWAY Жыл бұрын

CHANNEL SUPPORT - buymealatte.com

@taidenmartinez1302 Ай бұрын

thank you! I watched another video where the dude went through the fender lining. removing the lining was the hardest part. ended up sifting through your comments where someone wired up the wrong yellow and green wire, but went through the top of the engine bay this time. much easier. thank you. love all your videos! 🙏🏻 super helpful.

@randy1568 4 ай бұрын

Colt strikes again! This guy has helped me so much.

@McCoy_Judd 4 ай бұрын

He da Man!

@jimd1050 4 жыл бұрын

Don't ever knock yourself down because the phone's out of focus or something Colt - that was the best Video on the subject I've seen yet! Just what I needed for my 2019 F-450... already had the resistor prepped, have the corrugated tubing, wire, soldering experience, etc. - just wasn't sure about the layout on the newer trucks! Your video did the trick - Thank You SIR! I'm even going to stuff a second wire in the tubing just for future use (pull wire, or whatever) before I zip-tie it in place across the firewall. ALSO - IMPORTANT NOTE!!! There are TWO yellow/green wires on that SOB plug - pin 7 (which you want for Diesel) and pin 18 (which Ford uses for Gas trucks - should have been a different color you fools)! Mine were crossed in the bundle and I spent two days retracing my steps, trying to figure out why my S1 would not turn on the high idle - voltages traced all the way down to the plug, to the yel/grn wire - had no voltage across the resistor BUT it was good and wired right. Finally, a guy on F450 FB Page said he had connected to 18 by mistake and it was never selecting the "Mode"!!! Duh!

@COLTSWAY 4 жыл бұрын

Jim Duarte awesome to hear that! And that’s a great idea about about the second wire! Thank you for watching, I really appreciate it. If you haven’t, please like and subscribe, I’m trying to grow this channel!! 🇺🇸

@Campfirepiston 5 жыл бұрын

"lets get with it Son" Great video straight to the point no yack yack yack I have a 2018 PSD my have to try this

@COLTSWAY 5 жыл бұрын

Mike M thanks big dog!!! Get it done! 🇺🇸

@bigt8600 5 жыл бұрын

Watched three videos on this. Yours was straight and to the point. Thank you.

@COLTSWAY 5 жыл бұрын

Taylor Calhoun Thanks my man! 🇺🇸

@jmcaulay182 5 жыл бұрын

@@COLTSWAY what was gage of your overlay?

@COLTSWAY 5 жыл бұрын

@@jmcaulay182 what you mean my man? like what size was the wire loom?

@chrisnelson4182 5 жыл бұрын

bro this is the most info i have seen on this i have been wanting a high idle as well thanks for all the good info i didnt know 1/2 of that stuff how to make 5&6 hot all the time i really needed this thanks so much keep posting awesome videos like this one

@COLTSWAY 5 жыл бұрын

Chris Nelson thanks bud! Glad it helped you!!

@Ronix1313 4 жыл бұрын

Next mod for my 18 f250 platinum for sure! I was able to do a work around and make my upfitters 1-6 hot 24/7. Only have 5,6 hot wasn't enough for me.

@COLTSWAY 4 жыл бұрын

Awesome! I bet that Plati is nice! Please like and subscribe! 🇺🇸

@thefartdart 3 жыл бұрын

Fyi love your videos done like 4 of your mods big guy. FYI I added a shock censer to my factory alarm system with a lots help from this video

@COLTSWAY 3 жыл бұрын

Hell yea my man! Thanks for watching and for the comment! I really appreciate it! Been trying to grow the channel for awhile! 🇺🇸

@heathcantrell3870 3 жыл бұрын

Just did this today. Thanks for the video. It was very helpful. Thanks bud. Already liked and subd.

@COLTSWAY 3 жыл бұрын

Thanks brother, i appreciate it!

@finstadskidloaderservice8056 5 жыл бұрын

Did this to my new truck today. Watched many videos yours by far was the best one on it.

@COLTSWAY 5 жыл бұрын

thanks my man! glad i was able to help! appreciate your comment.

@finstadskidloaderservice8056 5 жыл бұрын

So glad Ford makes it easy to hook things up. Ive always been a Chevy guy but I'm impressed with this ford

@COLTSWAY 5 жыл бұрын

Finstad Skidloader service yea its really nice! I’ve got a xlt and I can basically give it everything a lariat has and actually more then some lariats for a lot less. I’ve done a lot to mine so far and plan to do more.

@finstadskidloaderservice8056 5 жыл бұрын

Mine is also xlt with council like yours

@chriswhite4596 5 жыл бұрын

Damn good job , very clear

@COLTSWAY 5 жыл бұрын

Chris White thanks!

@billryan3032 5 жыл бұрын

Ford should hire you for these vids. By far the best visual and verbal explanations. Thank you!

@COLTSWAY 5 жыл бұрын

Bill Ryan no problem, glad I could help. If you like it you should subscribe to my channel. I always try and put out new info. 👍🏻🇺🇸🇺🇸👍🏻

@kevindavis8671 2 жыл бұрын

Waiting on my resistors to come in now. I also learned that wire #2 can be used for a remote turn on for an amplifier. Then to Suncoast for tuning the subs.

@COLTSWAY 2 жыл бұрын

Thanks brother, I didn’t know that!

@adams17561 3 жыл бұрын

That’s really cool! Thanks for the video

@COLTSWAY 3 жыл бұрын

Thanks for watching and for the comment. If you haven’t, hit that sub button for me. Trying to grow the channel! 🇺🇸

@timothyjohanson2296 3 жыл бұрын

@@COLTSWAY Great stuff Colt! Loved the video on your emissions muffler mod. Curious if you’re still running DEF in your rig or not. Thanks brother stay safe and heal up!

@COLTSWAY 3 жыл бұрын

What’s DEF...😂🇺🇸😂

@timothyjohanson2296 3 жыл бұрын

@@COLTSWAY Can you run without it? Or will the truck want to force a regen cycle with no fluid?

@COLTSWAY 3 жыл бұрын

I can’t run with it right now. Mines deleted. I have no dpf on it. And the egr is unplugged.

@mattlikesbikes 2 жыл бұрын

I've got my current dash cam wired to power on when the truck has power (AUX or running). But I like the idea of always on. With the dual battery on the F250, I assume the risk of the camera draining the battery is extremely low, right? Like weeks without running low?

@donniephares5978 3 жыл бұрын

And it was a good video good shit thanks for all the tips and tricks

@COLTSWAY 3 жыл бұрын

Donnie Phares thanks my man!

@jeffreyhill3960 3 жыл бұрын

Good vid.

@COLTSWAY 3 жыл бұрын

Thanks brother, I appreciate you watching. Hit that sub button for me if you haven’t, trying to grow the channel. 🇺🇸

@bittondb 5 жыл бұрын

Thanks.

@COLTSWAY 5 жыл бұрын

David Bitton no problem!

@stephengeheb5367 5 жыл бұрын

Hi. How is the plastic loom holding up to the engine heat since it has been a few months? This video has been the best one to follow. Thanks.

@COLTSWAY 5 жыл бұрын

its holding up good my man! No problems as of yet.

@someguy4476 2 жыл бұрын

You’re awesome.

@COLTSWAY 2 жыл бұрын

My man! Thanks guy! 🇺🇸🦅🇺🇸

@ljs2274 3 жыл бұрын

How can you do this on a f550 with a roll back and pto.? The first switch will in gage pto and high idle .. I just want high idle

@k20edef1 5 жыл бұрын

HELLO, GATTA GO!!!

@COLTSWAY 5 жыл бұрын

😂😂. Was a habit back then. I made a naked hunting video that had light 900,000 views. And I said it a lot in there by habit. But I doing better now!

@teamspinningballyhoo904 5 жыл бұрын

Could you do a video on wiring aux pod lighting to the upfitters?

@COLTSWAY 5 жыл бұрын

The Spinning Ballyhoo done. I just uploaded one for you brother! Please like and subscribe. It will be on my page. Thanks.

@NAJIM-007 2 жыл бұрын

Bro I need help how to make wiring PTO f20 10- bolt ( ford 10r140 series )

@t.c.7166 3 жыл бұрын

Colt, I have a 2021 Super Duty 6.7L ordered, and have a question: how did you learn of your high idle mod? Looks like a great mod, and much less expensive than some $100+ high idle KIT. I bet the 'kit" has the same resistor covered with a fancy plastic box with plug & play on either end. I'm certainly not doubting your mod, as it clearly works...I'm just wondering how you stumbled across it. Thank you

@COLTSWAY 3 жыл бұрын

Hey brother. I actually saw someone else on KZfaq do it. I just didn’t like their video and some things I would change so I decided to make my own. Thanks for watching and thanks for the comment. If you haven’t, please like and sub. Trying to grow the channel! 🇺🇸

@WhatsthePOINT_EDC 2 жыл бұрын

Question here… on very cold mornings when the truck shifts I notice some hesitation during shifts in all gears but yeasterday and today it thumped hard when shifting in to 6th going up hill and once on flat land. The fluid is not low so that not the prob. Lately there’s been a loud wine coming from the front of the truck at idle and when I begin to accelerate until around 1200rpm then it stops. Do I need a high idle installed to warm the trans up or could this be a different issue? Any help would be very appreciated. Thanks for the video btw.

@COLTSWAY 2 жыл бұрын

How long have you been deleted? Has the trans had time to relearn? 🇺🇸🦅🇺🇸

@Commercialvoice 6 жыл бұрын

Hey COLTSASTALLION, I just purchsed a 2018 f250 platinum and a blackview 900. Can you expand a little on your comment about the "dashcam wire"? Did you wire it to an upfitter switch?

@HollywoodBush 5 жыл бұрын

Commercialvoice he said it’s currently not wired to a switch but directly to the battery. You can wire to a switch if you wanted and run it off the 40 amp switches. You would just need to configure the switches to run off the battery.

@Commercialvoice 5 жыл бұрын

Thaks hollywood bush. Your right, after I watched it a few times that is exaclty what he said...Im still trying to figure out all this darn truck does...it has stuff on there I STILL havent found!!

@HollywoodBush 5 жыл бұрын

If you follow his video but use either switch 5 or 6 you can wire your cam to the Upfitter Switches. Then just move the fuse so that way the switch will run off the battery without the need of the truck being on.

@COLTSWAY 5 жыл бұрын

hollywoodbush thanks for the quick reply to him. 🇺🇸

@christiandavis3910 Жыл бұрын

Colt, My pass through wires are tucked up so far under the passenger floor board it is unreal. I can’t fit my hand back there and I don’t have a 45° needle nose pliers that long. How did you reach way back in there?

@christiandavis3910 Жыл бұрын

Disregard. I’m not dicking with this mod and the pass through wires. 12v solutions has an inexpensive plug and play kit that doesn’t involve running wires or mounting a potentiometer. I still want to get those pass through wires down though.

@gametlogging1942 5 жыл бұрын

Hi there. So after u start the pickup then turn switch on and hit parking brakes it turns on. Then release brake and it turns off. Can u leave the switch on and press the parking brake again will it idle back up or do u have to shut the pickup back off and start over?

@COLTSWAY 5 жыл бұрын

yea you can just press it again. you dont have to turn it back off. also if you are in high idle and you hit the regular brake or gas pedal it will come out of high idle. but dont worry about leaving the switch on. sometimes i just pull the ebrake and start driving and forget to turn switch off. it doesnt matter.

@gametlogging1942 5 жыл бұрын

@@COLTSWAY thanks, I was asking cause I know I could do it without upfitter switches but would only be able to do it once then I would have to shut the truck off and start it again to do it again. The upfitter switch sounds nice since u don't have to shut the pickup off to turn it back on. Thanks again

@COLTSWAY 5 жыл бұрын

@@gametlogging1942 yes sir! using the upfitter switch is the way to go in my opinon.

@vincentpira 5 жыл бұрын

Excuse the noob, but what size wire are you using? 16awg?

@COLTSWAY 5 жыл бұрын

Vincent Pira pretty sure I used #12. But as long as you match it or a lil bigger then the pass threw wire you should be great. Please like and subscribe. 🇺🇸

@bobbyc1109 5 жыл бұрын

I have Ford Xl 250 diesel. The dealership installed this high idle on my Aux 1. I see what’s its for. But my question is I work out I the oilfield and leave my truck running mostly all day .. How would you recommend me to use it his high idling All day ? Just for a while ? Thanks

@COLTSWAY 5 жыл бұрын

bobby casarez I use mine anytime I idle. These new diesels are different then old ones without emissions. It’s not good for them to idle like old school ones. So when I idle, I have the high idle engaged.

@bobbyc1109 5 жыл бұрын

My exhaust over the limit light service light came on. I drove it for a good 80 miles this afternoon. To work and it didn’t clean the exhaust so now the exhaust over the limit service light came on. I have to take to the dealership to take care of this. Does the truck still regen even when the high idle is on ?

@COLTSWAY 5 жыл бұрын

bobby casarez mine does sometimes and sometimes it doesn’t. Sounds like it’s time for you to delete. Going to continue to have these problems if you idle all day in these new trucks.

@DarinWheeler1967 3 жыл бұрын

Colt will everything be the same on my ‘17 Powerstroke?

@COLTSWAY 3 жыл бұрын

Yes sir. 17-19 be the same. 20 may be, but if not it’s real close. 🇺🇸

@garrettvowk7383 4 жыл бұрын

Will it idle up instantly during cold start or will it ramp up the rpm after everything gets to a certain temperature?

@COLTSWAY 4 жыл бұрын

Garrett Vowk if you leave the parking break engaged and leave the upfitter on, it will do it soon as you start it up. In the winter when I park it I just leave break on and upfitter. Thanks for watching. Please like and subscribe! 🇺🇸

@babycryer1234 3 жыл бұрын

I’m no expert, but I’ve always heard it’s bad to rev up diesels before they’re truly warm. Which is why I assume the truck, while it will automatically go to a high idle after it’s warm, I assume that is why it doesn’t high idle right off the bat.

@cameronpeschel5699 4 жыл бұрын

How did you find out what wires to use on the pigtail? I don’t have upfitters and am trying to hardwire my radar in but can’t figure out which wire if any is just a power

@COLTSWAY 4 жыл бұрын

If you don’t have upfitters I wouldn’t think you would have the wires?

@cameronpeschel5699 4 жыл бұрын

It’s not the upfitters wires but the “pto” harness you put the 20ohm into

@COLTSWAY 4 жыл бұрын

Cameron Peschel you don’t use those to hardwire anything. Run a wire from your battery to the pass threw wires. Splice it above the firewall and below.

@COLTSWAY 4 жыл бұрын

Cameron Peschel email me and I’ll send you a video of my truck real quick. Coltshinton@gmail.com

@cameronpeschel5699 4 жыл бұрын

Well shit lol don’t have those either

@donniephares5978 3 жыл бұрын

Did your truck come stock with the up switches I have an XLT and I do not have them

@COLTSWAY 3 жыл бұрын

Yes. Mine came stock, some do and some don’t. But I did see a video on fb about how to add them.

@jarrod1507 3 жыл бұрын

Liked and subbed to a fellow lineman.

@COLTSWAY 3 жыл бұрын

Hell yea brother, I appreciate it! I’ve got tons of vids for these trucks! 🇺🇸🦅🇺🇸

@jarrod1507 3 жыл бұрын

@@COLTSWAY I just ordered the high idle resistors and obd plug from your links.

@COLTSWAY 3 жыл бұрын

Hell yea man, I appreciate it. What year is your truck?

@jarrod1507 3 жыл бұрын

@@COLTSWAY 2019 f250

@COLTSWAY 3 жыл бұрын

Ok good deal. I haven’t messed with a 20 yet and I know the motor is different so am not 100% positive it works on a 20. But it should. But you all good my man. 🇺🇸🦅🇺🇸

@cameronjohnston5158 4 жыл бұрын

Any specific reason you used a half watt resistor? I’ve seen some use 1/4 watt and 1 watt. Do you know if it matters?

@COLTSWAY 4 жыл бұрын

Cameron Johnston From my understanding the higher the resistor the higher the idle is. I’m not 100% but pretty positive that’s the difference. The 1/2 a watt put me between 1200-1500 rpm. Thanks for watching. If you don’t mind please like and subscribe, trying to grow this channel! 🇺🇸

@cameronjohnston5158 4 жыл бұрын

COLTS WAY thanks for responding. The 20k is the resistance and that’s what gives you the rpm. I was curious as to wattage choice. I’ve seen other videos with 20k resisters of different wattages with the same results. Just wondering if wattage actually mattered and why. Have you had any issues to date with the half what 20k you put in?

@COLTSWAY 4 жыл бұрын

To be honest I only used the 1/2 watt because I saw someone else use that so I knew it would work. And no, I have not had any problems with my high idle. Used it today actually. It’s been flawless ever since I did it. 🇺🇸

@cameronjohnston5158 4 жыл бұрын

COLTS WAY beautiful. Thanks for your help. I bought both 1/4 watt and 1/2 watt just in case. Doing the install tomorrow. You also gained a follower my friend. Have a good night.

@COLTSWAY 4 жыл бұрын

Thank you very much! Let me know how it goes!

@dougf7342 Жыл бұрын

Colt - if I leave the upfitter switch on and set my parking brake will the high idle work when you use the remote start?

@COLTSWAY Жыл бұрын

Yes it does. 🇺🇸🦅🇺🇸

@dougf7342 Жыл бұрын

@@COLTSWAY thanks man. Love your videos

@kaedonsteinert753 3 жыл бұрын

Colt, give it to me straight, will I be able to do this on my 2021? Also can I do it on an of the aux switches?

@COLTSWAY 3 жыл бұрын

Shit son I wish I could, I haven’t tried on a 2021. I know it works on 2020 so I would assume it would. Had a sub comment below they were doing it to a 2021. I just messaged them asking how it turned out. I’ll let you know soon as I hear back my man. Yes any of the aux switches are fine. 🇺🇸🦅🇺🇸

@wiredforstereo 4 жыл бұрын

I did pick the smallest one. This line carries very little amps, wanna save those bigger wires for something that sucks some power.

@COLTSWAY 4 жыл бұрын

Good deal. Glad you got it working, thanks for watching, please like and sub!

@texflick1011 2 жыл бұрын

Does this work no matter what the temp is outside? or does it have to be below like 30 degrees for it to work

@COLTSWAY 2 жыл бұрын

Man I literally made it do it at end of the video…you can do it anytime

@thefartdart 3 жыл бұрын

Can I ask why you didn't use the upfitter wires at the kick panel instead of the eng bay ?

@COLTSWAY 3 жыл бұрын

Because those upfitter wires don’t pass threw to the cab. The only pass threw wires are on the passenger side that I used.

@thefartdart 3 жыл бұрын

@@COLTSWAY Thank you

@COLTSWAY 3 жыл бұрын

Anytime my man. 🇺🇸

@adamberlin5779 3 жыл бұрын

Great vid. But I can you explain to me why I would want the option to be able to put the truck in high idle?

@COLTSWAY 3 жыл бұрын

Thanks Adam, there are lots of reasons but quicker warmups, say maybe you had a PTO winch. And for extended idle periods as idling Isn’t great for a diesel. I use it all winter though as it does warm the truck up faster. Maybe you were running a good bit of electronics or winching for an extended period of time. Just helps keep the voltage up as well. Thanks for watching my man. Hit that sub button if you haven’t, trying to grow the channel. I have tons of vids for our trucks. 🇺🇸

@adamberlin5779 3 жыл бұрын

@@COLTSWAY Thank you for the quick response. Your reasons make sense. I live in CO and for all those reasons I will be installing the high idle. Found your channel about 2 weeks ago. And hit the sub button after the first vid I watched. I've go a 2018 F350 Lariat.

@COLTSWAY 3 жыл бұрын

Hell yea brother, I appreciate it. Thank you for watching and for the comment. Let me know how it turns out. Mine is a 2018 as well. Take care my man. 🇺🇸

@adamberlin5779 3 жыл бұрын

@@COLTSWAY I don't know if you have a vid on it. But would like to see how to power clean the engine properly.

@Patterson0 Жыл бұрын

Does resistor need to be 1/2 watt or is 1/4 watt enough

@COLTSWAY Жыл бұрын

With a 1/4 watt the engine wont rev up as high. Would barley be a high idle

@project.prototype 4 жыл бұрын

Does the high idle stop if from shutting off when its idling for more than 30 minutes

@COLTSWAY 4 жыл бұрын

I’ve never had it shut off when Idling with it engaged. Please like and subscribe! 🇺🇸

@joshsmykalski3950 4 жыл бұрын

Yes, It does!!!

@COLTSWAY 4 жыл бұрын

Josh Smykalski thanks for helping out!

@kobiesunderland6031 2 жыл бұрын

Do you have a link for the resistor?

@COLTSWAY 2 жыл бұрын

It’s in the video description my man. 🇺🇸🦅🇺🇸

@omgnothingisavl 4 жыл бұрын

Whats the amperage output on the alternator when in high idle?

@COLTSWAY 4 жыл бұрын

omgnothingisavl I ain’t even gonna lie. I got no clue 🤷🏻‍♂️

@omgnothingisavl 4 жыл бұрын

@@COLTSWAY I'm gonna play with it and see. Wanting to avoid buying a generator to top up 19ft travel trailer battery occasionally when boondocking.

@COLTSWAY 4 жыл бұрын

omgnothingisavl let me know what you find out! I know some trucks it’s a option to get dual alternators.

@dackglover7080 5 жыл бұрын

Is it possible to set the brake and leave the switch on so when you start truck the next morning it would go into high idle?

@COLTSWAY 5 жыл бұрын

Dack Glover Absolutely. I do it all the time. 👍🏻🇺🇸

@dackglover7080 5 жыл бұрын

COLTSASTALLION. Will it work with remote start too

@COLTSWAY 5 жыл бұрын

Dack Glover I have a xlt it didn’t come with remote start...I can’t say for sure but I do believe it does.

@dackglover7080 5 жыл бұрын

COLTSASTALLION one more question and I’ll leave you alone brother, what size wire do I need?

@COLTSWAY 5 жыл бұрын

Dack Glover I used #12 but it could be smaller if needed.

@jamiefrench1421 4 жыл бұрын

Help me out! I've watched your vid about 10 times checked my wires n connections about 10 times. This doesnt work on my truck. 19 f250.

@COLTSWAY 4 жыл бұрын

Jamie French can you send me pics to my email of the wires you have hooked up for the upfitter and Where you connected them in passenger floorboard. Coltshinton@gmail.com. You sure you have the right upfitter hooked up?

@jamiefrench1421 4 жыл бұрын

Will do. Probably be later today

@MrBubinski777 4 жыл бұрын

It is a powerstroke right?

@COLTSWAY 4 жыл бұрын

stan sams maybe I should have asked that brother. I just assumed. Shit I learned something. Thanks for watching and helping out. Please like and subscribe. 🇺🇸

@1234faded 2 жыл бұрын

I just carry a brick with me. Self defense and high idle tool.

@COLTSWAY 2 жыл бұрын

I like your style! 🇺🇸🦅🇺🇸

@blueoval6875 5 жыл бұрын

What would need high idle for?

@COLTSWAY 5 жыл бұрын

I use it to warm up faster in the morning. They say idling is good for these new trucks so if in high idle i assume its better. Also if you run a lot of accessories on a job site or something.

@blueoval6875 5 жыл бұрын

@@COLTSWAY Nice to know. I do live in a cold environment and that would be a great asset.

@COLTSWAY 5 жыл бұрын

BLUEOVAL68 yes it is!

@andys9155 3 жыл бұрын

COLTS WAY I know you’ve since deleted your exhaust but is this mod good for burning off soot?

@COLTSWAY 3 жыл бұрын

I am not sure on that answer brother. It did the high idle before I deleted and sometimes it would regenerate when I had it in high idle so maybe it would.

@gross56647 5 жыл бұрын

Aight?

@Buszzbait69 3 жыл бұрын

Damn it. Couldn’t get mine to work. watch over and over should of been simple but F no‼️I have a 17..looks like I connected that 1/2 ohms to the white/brown and a brown and should of been white/brown and green. Even after doing that and soldered a new 1/2 ohms it still not working..did I blow a fuse? How do I test that shit? And yes I put the EBrake and flip the up switch #1 forward and it lights up yellow. Help please.thanks Colt

@COLTSWAY 3 жыл бұрын

Only thing I can think of is you got the wrong wire hooked up coming from the pass threw wires. Did you double check that?

@Buszzbait69 3 жыл бұрын

@@COLTSWAY I did..grey and brown I believe I used..

@COLTSWAY 3 жыл бұрын

That’s the only thing I can think it could be is you can the wrong wire hooked up from top of engine bay to the underside

@Buszzbait69 3 жыл бұрын

@@COLTSWAY I’ll go triple check..thanks brother‼️

@COLTSWAY 3 жыл бұрын

Man I just don’t know what else it could be!

@jamiefrench1421 4 жыл бұрын

Can't find pass through under the hood?

@jamiefrench1421 4 жыл бұрын

Never mind 🤣

@COLTSWAY 4 жыл бұрын

Jamie French glad you found them! 😂. Please like and subscribe! 🇺🇸

@mattnormand8351 3 жыл бұрын

All be damned there two yellow & green wires in that harness by the fuse panel, I had 50/50 odds and of course I picked the wrong one. The pass thru wires are a great idea but boy they make them about as helpful as not having them

@COLTSWAY 2 жыл бұрын

I know! Like wth Ford you can’t spend the extra nickel to make the wires long enough to splice! They are so short! Thanks for watching brother. Hit that sub button if you haven’t. Trying to grow the channel!! 🇺🇸🦅🇺🇸

@Northeast_Mainiac 3 жыл бұрын

Your making me want to trade my 2020 silverado RST WITH THE 6.2 L gas for a superduty diesel 😁

@Michael-ft3rc 3 жыл бұрын

I don’t know what you’re waitin’ on

@tprice3450 3 жыл бұрын

Tired of pushin?

@COLTSWAY 3 жыл бұрын

yea what you waiting on?

@Northeast_Mainiac 3 жыл бұрын

@@Michael-ft3rc my wife’s blessing

@COLTSWAY 3 жыл бұрын

Better to ask forgiveness then permission.....🇺🇸

@rfugate2002 5 жыл бұрын

Whats the reason for this?

@dwtc551 5 жыл бұрын

rfugate2002 for when it’s freezing outside and no matter how long you let it run in the morning it will not build heat. Oil or water temp. It usually takes 10 plus miles with tow/haul and engine brake on to start producing any heat at all

@COLTSWAY 5 жыл бұрын

@@dwtc551 thanks brother.

@COLTSWAY 5 жыл бұрын

also for alot of our work trucks down south when its really really hot. sometimes we sit still so long at idle that the ac gets warm, unless we drive around a minute. but with a high idle it helps that as well. or if you are running a ton of accessories...winch...lights. etc.