Com-Pac Restoration Ep 5: Getting Ready to Separate the Deck from the Hull

Рет қаралды 1,777

3 жыл бұрын

In this video we pull the boat out from under the trees and start preparing it for the separation of the deck from the hull. The winter was long and cold and now it is time to continue with the Com-Pac 16 sailboat restoration project. After the deck separation , the stringers will be re-constructed and the boat re-assembled.

Пікірлер: 18

@SteveTurtle 3 жыл бұрын

That wasn't too bad at all. I'm not even tired. Looks like a great project. Thanks for sharing. Sorry about the rudder.

@BikesBoatsBivouacs 3 жыл бұрын

The next to steps are the hardest. Thanks for watching.

@ratfinkron5793 3 жыл бұрын

thats going to be awesome Scott when its done

@BikesBoatsBivouacs 3 жыл бұрын

The hard stuff is about to start. Thanks for watching.

@rvdogfl 3 жыл бұрын

Can't wait to see the finished boat . I know how much work it is to replace stringers. I sometimes think I like working on the boats more then using the boats.

@BikesBoatsBivouacs 3 жыл бұрын

It will take sometime but should be a good project. Thanks for watching.

@CookingwithRick 3 жыл бұрын

Hi Scott, you sure are handy a lot of work to do.

@BikesBoatsBivouacs 3 жыл бұрын

Keeps me busy Rick. Thanks for watching.

@LuckyDawgProductionsModerator 3 жыл бұрын

The boat has already come a long way since the day you brought it home. Look forward to seeing the boat finished.

@BikesBoatsBivouacs 3 жыл бұрын

Its a slow process but probably not as long as a deck build. Lol. Thanks for watching.

@LuckyDawgProductions 3 жыл бұрын

Good video, Scott. I did a lot of work on boats for years. Used to hang off the side of the gunnel making patterns. Never fell in, but lost a cellphone once. Haha. I think Harley wants to get in and help you, Scott.

@BikesBoatsBivouacs 3 жыл бұрын

I lost a lot of tools over the side when working on the boats in their boat slip. Harley always wants to be involved in every project. Lol. Thanks for watching.

@anunganakdesa6424 3 жыл бұрын

Hello 🔔❤️👍🔥

@BikesBoatsBivouacs 3 жыл бұрын

Thanks for watching

@PCarew 2 жыл бұрын

I'm sure you have probably figured this out, but the scuppers (drains) connect and are fiber glassed to both halves of the boat.

@BikesBoatsBivouacs 2 жыл бұрын

I did. I ended up getting rid of the boat after I costed out the materials to repair. Currently looking for another sailboat. Thanks for watching.

@scottbobo2145 3 жыл бұрын

Just curious, I have the same year compac, and on the very bottom of the keel in front of the stern trailer roller is a perfectly square cut out in the fiberglass. Almost like the company filled the concrete ballast from there, then plugged it will filler. Wondering if yours was the same...

@BikesBoatsBivouacs 3 жыл бұрын

I dont see that on my boat. Thanks for watching.