Рет қаралды 7,045
This video is about how to set coming home / leaving home lights on vehicle without auto lights and without light sensor. I shown this process on my vehicle Seat Leon 2017 but same procedure is almost identical for Skoda and VW vehicles.
If you want to do same on your vehicle, steps are :
1. Connect laptop with VCDS application to OBD port, turn the ignition on and run VCDS on laptop.
2. Select 'Control module' in VCDS then '09-Central electronic' and enter 'Security access' (enter 31347) to enable changing values.
3. Enter '10-Adaptation' and make next changes
3.1. ENG 116948 - ENG 116115 - Leuchte 12 NL LB45 - Lichtfunktion G12 set to new value 'Interior light'
3.2. ENG 116948 - ENG 116117 - Leuchte 12 NL LB45 - Dimmwert GH 12 set to new value '100'
3.3. ENG 116948 - ENG 116118 - Leuchte 12 NL LB45 - Dimming Direction GH12 set to new value 'maximize'
3.4. ENG 116949 - ENG 116134 - Leuchte 13 NL RB5 - Lictfunktion G13 set to new value 'interior light'
3.5. ENG 116949 - ENG 116136 - Leuchte 13 NL RB5 - Dimmwert GH13 set to new value '100'.
3.6. ENG 116949 - ENG 116137 - Leuchte 13 NL RB5 - Dimming Direction GH13 set to new value 'maximize'.
Warning : Video is made with good intention and to help people but you are doing this on your own responsibility.