Common Mistakes Installing Transmission- Shifter Cables

Рет қаралды 283,806

5 жыл бұрын

Want to know the most common mistakes when installing a rebuilt transmission? Have you had problems after installing a new transmission only to find it wasn't the transmission at all? Save yourself time and trouble by watching this video on electrical connections and the rest of the series. Avoid problems you might think are problems with the new transmission, but is from a step you missed in the process.
Want to know how to troubleshoot an installed transmission? J & G Transmissions shows you what needs to be done to properly install a transmission, and what needs to be done to prevent problems. Learn what goes wrong with a transmission installation from an expert transmission repair shop in Salt Lake City, UT.
Subscribe to our channel and learn more at www.jandgtransmissions.com or www.saltlaketransmissionrepair.com
Video produced by www.ellevengroup.com audio licensed through audioblocks.com

Пікірлер: 59

@J.Crooner 2 жыл бұрын

To permanently solve this issue take the shifter arm off the transmission and cut the peg off of the shifter arm then drill a small hole through it. Now you will be able to use a small bolt, a couple of washers, and a locknut to reconnect the shifter cable for good with a much higher level of security. I haven't had any more issues with it since I performed the surgery on it. This is by far the best fix to solve this common problem and provide peace of mind when driving down the highway, I Promise You That!!!!!👍😎👌

@mayken6661 2 жыл бұрын

Excellent idea 👍

@J.Crooner 2 жыл бұрын

@@mayken6661 Absolutely since I reinstalled my trans I've had no more issues with it and the only way it's coming apart now is if I use wrenches to unscrew it.👍😎👌

@mayken6661 2 жыл бұрын

Yup, just replaced the whole cable at work because the bushing isn’t sold alone for Equinox 👎🏻. But they paid for it, had it been mine , your idea wins !

@J.Crooner 2 жыл бұрын

@@mayken6661 Hey when it first happened to me I didn't know what was going on I thought my tranny had seized up stuck in gear. Now imagine the cable detaching on the interstate and having to stop in the middle of the road for whatever reasons only to find out you can no longer shift into any gears.😲 That would be completely insane.😳

@kennethdegruchy5503 Жыл бұрын

It seems to me the crappy and unreliable OEM cable connection was decided upon to make the assembly line installation very simple and quick and the hell with problems down the road for the owner. A shame.

@-Siculus-Hort- 2 жыл бұрын

thank you. im having this problem as we speak.

@blessethishe 4 жыл бұрын

These type of videos so good. Although its named wrong. Should be common things we see that cause a failed shift cable.

@montydaniels1054 Жыл бұрын

lol how I got here when I was looking at at 2010 Jeep Patriot but this I can agree on, I had that issue where I adjusted the linkage so Drive actually went into Drive. After having to re-adjust the cable twice, I figured it was the cable either stretched, or now after watching this video, the bushing is worn out. I bought a new cable & next I'm going to change it. Great video to tell me that I was right when I decided to just replace the cable. So now I'll look for a video showing me what I cannot see, on what I need to do to replace it since it's very hard to see the cable routing on my 2010 Jeep Patriot....

@angelie024 14 күн бұрын

Hi, which colored wire of the transmission is the one to start the car. My father is having problems since he changed the transmission with another one after putting in a gear box yesterday

@nesisalazar5635 11 ай бұрын

Nice

@santaisgruntinginmycloset9422 11 ай бұрын

My buddy told me to get an eclip to hold mine on for a quick temporary fix is this not a good idea?

@thulanemabena14 2 жыл бұрын

Hi guys i have modify kia sedona with camry engine so now my problem is when entering gear1 it goes to reverse what have i done wrong

@34uzz78 2 жыл бұрын

Is there a different name for this on a 2008 Infiniti g35? I can’t find it anywhere

@meganlacey6154 5 ай бұрын

Can the shift linkage cable (or shifter cable) cause gear timing or selection issues such as the speed measured by input shaft speed sensor to be different from the speed of the engine, and therefore TCM/PCM to report "Input Shaft Speed Sensor No Signal" error?

@opalrector3208 2 жыл бұрын

what is a band that broke in my 2004 pt cruiser tranmishin how much is it to fix

@jimi3182 Жыл бұрын

Not what it was labeled at all. However after getting my clutch changed figured out this is why i couldn't use certain gears

@mendozaconsultation 2 жыл бұрын

DIY FIX. Get shock absorbent bushings n trim to fit alone with washers that fit inside. You may have to drill out the washer holes to fit. Then get some n use Eclips to hold them in place. Will save you $30-$200 plus in cable cost alone n mechanics hourly fees.

@opalrector3208 2 жыл бұрын

what dose shifter cable for pt cruiser shifting cable cost 2004

@ineikomcbean2696 3 жыл бұрын

Where can I get a 2WD automatic shifter cable for my 98 crv

@carljohnson4996 2 жыл бұрын

The junkyard

@YoungGearHeads Жыл бұрын

Why can’t I just replace that bushing? I have a 2014 Suburban

@themoon4559 2 жыл бұрын

Wish ypu had an email to contact you.. I'm needing some questions answered but having issues getting them

@oldenwilson795 3 жыл бұрын

Linkage, at the transmission.

@donsterr Жыл бұрын

Mine stretched and snapped

@KFLson 3 жыл бұрын

Why do I have to press on the brakes hard to shift gears?

@mustng9646 3 жыл бұрын

My 2011 Mazda 3 is stuck in drive Could it be this cable? It only moves a little right and left ... from D to +/-

@rome252 2 жыл бұрын

Maybe you have an answer by now, but I have a manual transmission and my car was stuck in 1st gear, so I believe the answer could be yes

@mikecastleberry9671 2 жыл бұрын

As much money you bastards make. Off the poor people. Everything on transmission should be fixed or replaced not just painted black blue or silver I have been everywhere in the USA and 90 present the time we the people have to bring the vehicles back for a redo or the 9 dollar and hour help that pay reflects the outcome of are work

@dailyconfusion7222 2 жыл бұрын

This should of said MISTAKE

@prometheus9547 5 ай бұрын

A mechanic shop just charged me $760 to replace the shifter cable on 2009 Nissan Sentra

@agnidevan424 3 жыл бұрын

My mechanic charged me 525 for labor and 118 for the part.

@jjsquire706 3 жыл бұрын

😳Sounds like the typical "STEALERSHIP" price to me!!!!!

@jgjg3848 3 жыл бұрын

The parts are $95 for the cable and the bushings are $15 at the auto supply store.

@eddiesgsr 3 жыл бұрын

I think that mechanic is a crook. Its easy to install even if you dont know what your doing theirs videos

@tookapack9984 2 жыл бұрын

Mine charged 460 for all

@craigj.651 2 жыл бұрын

Ouch, hell no!

@xTHHxAimiForevr 8 ай бұрын

Kinda gettin pissed ngl. A million videos on the stupid bushings cuz it's an easy video to make for an easy an obvious problem. You know what isn't easy and obvious? How to actually do the replacement! Does your cable go through the floor or through the firewall? What electrical connections on the shifter itself need to be made? Can cables snap on the inside of the jacket or lose their tension? If you're reinstalling a transmission should the cable be in park or neutral? Is the only thing that keeps cables from being interchanged the linkage and length or are their other factors? THESE are what I want answers to. Not the thirteen hundredth "your bushing could be loose" video

@jeezyRteezy 7 ай бұрын

Agreed

@AenesidemusOZ 7 ай бұрын

Absolutely bloody agree. My shifter cable, being an old GM design, has NO plastic bushings; it's metal on metal all the way from the column to the transmission. The cable has started binding, probably due to excessive heat, and I want hints on that, not the 1,000th video on plastic clips or bushings.

@granviellelee4744 5 ай бұрын

Dude thank you so much. You took all the words out of my brain. This is extremely frustrating

@alexandrumacavei3223 Ай бұрын

there is nothing electrical all is mechanical only two cables one fro changing the actual gears and one for left amd right on atick

@alexandrumacavei3223 Ай бұрын

you just need to have them under your car placed like in a box where the actual shifter is

@treylane7082 3 жыл бұрын

Whirlpool transmission seal

@pistol850 7 ай бұрын

yeah that's how my whole Chevy Tahoe is built ,... all plastic everything and it falls apart if you sneeze on it. my 2008 Chevrolet Tahoe is a piece of junk and it's probably the last Chevrolet I'm ever going to buy