Ignition Points Modification Guide for Honda CB350 / CB360 / CL350 & CL360 Scrambler

Рет қаралды 35,289

6 жыл бұрын

www.common-motor.com/honda-ign...
www.common-motor.com/Honda-CB3...
The new supply of ignition contact points for the Honda CB350 / CB360 / CL350 Scrambler / CL360 Scrambler / SL350 & CJ360 must be modified for proper ignition timing adjustment. The old stock of Japanese-made ignition points for these motorcycles have pretty much dried up, and we have to turn to points made in China to keep our bikes alive. As is, the new points won't cut it, however with a few simple DIY mods they get the job done and your bike back in tune. Follow along and we will show you the modifications necessary to make these ignition points work right.

Пікірлер: 41

@broadwayFan28 6 жыл бұрын

That's just terrible that we have to modify them right out of the package. The last EMGO points that I found 3 years ago had crud on the contacts and needed cleaning before it would fire at all. A sad state but I'm glad you posted here. I wonder if there are enough returns that China might actually fix these.

@hectorgonzalez5939 2 жыл бұрын

Thank you Brendan this was a very informative demonstration!

@corbmanj 6 жыл бұрын

Very helpful as I'm coming up on needing a new set. Also pretty interested in hearing more about the electronic ignition system.

@josephcivita1450 4 жыл бұрын

Take your old points appart. Using a honing stone clean the contacts. I have some points that are 50 years old. I've also used electronic ignition from a Suzuki GS. Take the cam of the advancer and put the trigger from the Suzuki on there. Then mount the timing plate with pickups from the Suzuki in place of the breaker plate. Use the CDI box from the Suzuki. Easy to wire and works great.

@davidmulenga2085 10 ай бұрын

Do u hv pics

@theonebrewster 4 жыл бұрын

But I was taught to keep lubricants away from points, great video all the same.

@jdsstegman 4 жыл бұрын

I have been doing this for 25 years! The factory ones were not always set up proper either. So i found using dimond wheel used for sharpening carbide machining tools on a bench grinder and it will make the points clean and gets rid of pitting. But I only do this when I can not find points for all the od ball 70's bikes my customers bring me.

@davelundquist9419 Жыл бұрын

Thank you so much,I was going out of my mind trying to adjust the points. im glad i came across your video

@johnolepaulsen6101 Жыл бұрын

Thanks for the advice to open the screw holes a bit. that was the reason for my challenge to find the exact spot on R-side. Just open a tiny bit and it came spot on. :)

@HanzelFonferek 4 жыл бұрын

VERY HELPFUL! THANKS!!!

@user-bx6ri6yr2x Жыл бұрын

Thank you very much ! That's just the tech I need ! It's helpful for me to modify my old motorcycle. (Althought she's not Honda.... )

@tsbrownie Жыл бұрын

Excellent upgrade.

@tagerauen5378 Жыл бұрын

Amazing video you are a godsend. 🙏

@gwaygeewaay4253 5 жыл бұрын

Do u guys have a 78 goldwing 1000 points cam? I just purchased original points off eBay but I dont have the cam on my advancer

@sid4you100 5 жыл бұрын

You rock dude. Thank you.

@Common-motor 5 жыл бұрын

Glad we could help!

@mariobora4935 4 жыл бұрын

i changed the oil seal 2 times but i still have a slight oil leak, does anyone have any advice?

@tombrown8829 3 жыл бұрын

Excel made a point plate that used Chevy points and chip condensers that worked well I'm my old 750

@Common-motor 3 жыл бұрын

That sounds awesome

@pd1jdw630 3 жыл бұрын

Point taken.

@mikenixon4637 Жыл бұрын

Kudos!

@tombrown8829 3 жыл бұрын

Can we talk about my 72 350/4 please??

@buejensen494 5 жыл бұрын

Is 17:17 a normal amount of spark across the points or is it an indication of faulty/missing condensers/capacitors?

@Common-motor 5 жыл бұрын

Hey Bue, Here's a link to a short video clip of what a faulty condenser would look like: kzfaq.info/get/bejne/nuCFf5CetbaWY40.html

@tombrown8829 3 жыл бұрын

I like your site. Do you do carb rebuild for 350/4?

@Common-motor 3 жыл бұрын

Not currently, just the CB350 twins

@nakoawarrior3186 Жыл бұрын

I went to Iron Pony they charged me over $100.00 Dollars for 2 sets of points with no condenser? Now I see them with a condenser for about $37.00? For my KZ 550 sport.

@01thomasss 3 жыл бұрын

I got the point...

@TM15R 6 жыл бұрын

YEARS AGO, ON CB 350 F1, 500, 550, 750, WE DRILLED & TAPPED THE BREAKER PLATE TO USE GM EXTERNALLY ADJUSTABLE POINTS. THIS MIGHT WORK ON 2 CYLINDER BIKES, GOOD LUCK.

@Common-motor 6 жыл бұрын

Yes I have seen that mod on the 4 cylinders. There is not enough room in the points chamber for the GM points on the twins. Also fours are crankshaft driven and have placement at 180 deg apart. On the twins, it is cam driven which places the points at 90 deg apart.

@mysticalshyt 6 жыл бұрын

what size washer are you using to shim?

@speedphreax 6 жыл бұрын

He said that it's a standard 4 millimeter washer

@ChrisS5416 5 жыл бұрын

Is the electronic option available now

@doomclap 5 жыл бұрын

It's been available for a while now I believe, though they are all relatively expensive.

@joelrawlston2688 3 жыл бұрын

I used to use a nail Emery board

@tagerauen5378 Жыл бұрын

Don’t drag your file it will rip the teeth off it. If you treat a file with respect and use it correctly it will last a very long time. If you keep pressure on the teeth while you pull backwards on it, it will be worn out in five minutes! You make me feel like a high school shop teacher watching kids burn through five dollar files! Easy on that thing!

@ianbarker8103 Жыл бұрын

DWELL ANGLE??????

@stanleydenning 2 жыл бұрын

In 1979, I had a 1972 Honda CB 350. Finding parts for it was all but impossible. So, How in the hell does one find parts now? That was over 40 years ago. WTF?

@dieseltu1035 Жыл бұрын

What happened is the points aren't made by the same company. Theyre sold by the same company. . Don't think Amereican mass production factories . Think cottage industries. Theyre made by different people in batches , maybe even in their houses . for 3 bucks a day. then all the batches are mixed together. Real different people not working together. sourcing parts such as washers from different suppliers. So one person decided the big washers are ok, one decided no washers are ok . then they are all picked up and mixed together and sold. get what i mean.

@cafe100mph6 2 жыл бұрын

u always use wayyyyy to much grease

@Common-motor 2 жыл бұрын

Hey, what can I say? I like me some grease! No honestly don't use so much it gets on the points contact surface. We always wipe any excess off once things are installed.