Complete Beginners Guide to Building Your First Warhammer Model!
Рет қаралды 1,087
Күн бұрынWant to know how to build a Warhammer model but not sure how to do it? In this complete beginners guide to building your first warhammer model we will cover, what Warhammer hobby tools you’ll need, setting out a plan, through the entire step by step process of clipping out your parts, cleaning up the bits (including excess sprue and mould line removal), to putting them all together to a make completed warhammer miniature. Whether this is for Warhammer 40k, Age of Sigmar or any of the other games!
This video also Includes tips to make sure you have the best possible warhammer model you can before the painting stage. With a step by step guide to sub assembly for painting to gap filling in case you need to utilise these methods when you build warhammer models.
Let me know in the comments section below if you have any questions on the process or if you have any extra tips I've not covered.
Here is the link to the Warhammer instructions website in case you need to find any you're missing: / warhammerinstructions
If you have purchased some models from the secondary market and it didn’t come with any instructions - you can email gamesworkshop directly via this email custserv@gwplc.com and they’ll hopefully get back to you fairly quickly with a pdf of the instructions.
++ LINKS ++
▶ Subscribe / @thecommandphase
▶ Wayland Games affiliates.waylandgames.co.uk...
▶ Use the code "commandphase" to get 5% off on top of the up to 20% discount at Glasshammer Gaming. www.glasshammergaming.co.uk/
▶ X (Twitter) / thecommandphase
▶ Instagram thecommandp...
▶ Facebook / thecommandphase
▶ Linktree linktr.ee/TheCommandPhase
▶ Discord / discord
Timestamps for the how to build warhammer models beginners guide can be found here so you can skip to the ones you're most interested in.
00:00 - Intro
00:39 - Essential Hobby Tools
02:09 - Nice to Have Hobby Tools
03:02 - Getting Started
04:19 - Clipping out the Model Bits
05:25 - Model Clean-up
05:38 - Removing Excess Sprue
06:13 - Removing Mould Lines
07:40 - Dry Fitting
08:08 - Gluing Your Model Together
08:35 - Push Fit Models
09:05 - Model Sub Assemblies
10:38 - Model Gap Filling
11:23 - Conclusion
-------------------------------------------------------------------------------------------------------------
Music used:
"Clash Defiant" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/b...
"Corruption" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/b...
#beginnersguide #warhammer40k #ageofsigmar #warhammer #modelbuilding #modelbuildingtips
@stevo_hobbies 2 ай бұрын
Great video! Been using Green Stuff to fill the gaps, never even knew about the Vallejo stuff in the tube, looks much easier to deal with - immediately went to Amazon to get some! Thanks mate!
@TheCommandPhase 2 ай бұрын
Thank you for your kind words - glad there was something useful for you 🙂 It’s a good little find that Vallejo stuff, came across it a few months ago, hope you find it easier!
@WePaintMinis 2 ай бұрын
Excellent, useful video for folks who are looking what to do when they start. Also a great video for some folks who are still not 100% on what to do. 👍
@TheCommandPhase 2 ай бұрын
Thank you - that’s my hope from this 🤞
@MysteryTurtle1 2 ай бұрын
Amazing video, great job with the chapters, I can see myself coming back for a specific step and those chapters will be super helpful. Glad you’re feeling better, keep up the great work!
@TheCommandPhase 2 ай бұрын
Thank you - I’m really glad you’ve found this helpful, was fun to put together and make something a little different! This cold is still lingering but I can actually record a VO so that’s a plus! Thanks for kind words 🙂
@4TheLion 2 ай бұрын
Great content Mark! Keep up the good work! Your channel is a hidden gem
@TheCommandPhase 2 ай бұрын
Thank you kindly - that means a lot 🙂
@Stormhierta 2 ай бұрын
Going to pick up some of that sanding sponge I didn't know existed, might throw a Vallejo Putty in the bag as well... awesome even for someone who has assembled hundreds of models :D
@TheCommandPhase 2 ай бұрын
Glad the video was of some help! You’ll have to let me know how you get on with the sponge and putty 👍
@badgerking800 2 ай бұрын
I use poly resin glue as it sticks super fast and I find other glues take too long to set. I will say never thought about the mold lines before but I'll be sure too now
@TheCommandPhase 2 ай бұрын
That's fair enough - not sure I've tried that glue before, but might be nice to try out. Glad you got something out of this video - mould lines wise, if they are in places that noone is going to see, obviously you don't need to worry about them too much, but certianly something to keep in mind going forward. 👍
@saltytattie833 2 ай бұрын
For sub assemblies does priming and painting them make it harder to glue them back together? My logic being the primer will be a layer on top of the plastic for when you go to plastic glue it. Also how do you remove the sub assemblies from the paperclip without damaging them? Do they snap off fairly easily? And lastly, if you put the sub assemblies together and there is a gap will you have to putty, sand, and redo the paint job?
@TheCommandPhase 2 ай бұрын
Thank you for the questions I’ll go through each now and number them to help. 1. So when you stick the parts back to the model after painting them, you’ll want to use super glue rather than plastic glue as the latter will end up melting your paint job. You could if you wanted to, cover the connection area a little with some blue tack when priming the model so you have a clean connection point, although the super glue would still stick to the surface with paint on. 2. The paper clips do come out easily with a little bit of a tug. They’re strong enough to paint on depending how deep you drill, but certainly simple to take off. 3. I guess this would depend on the number of pieces you use here. My motto is generally to try and utilise the smallest amount I can, but typically its arms and heads for easier access and if they block the torso detail enough I couldn’t get a brush in. If I can build it fully I tend to. Hopefully with these you shouldn’t need to do any gap filling afterwards that would be noticeable, but if it is then you can paint the filler into the gap with a brush if you’d prefer to try and be as neat as possible to clean up afterwards. My suggestion there if you are going to use multiple pieces in a sub assembly - maybe add a small amount of blue tack to the connections when dry fitting just to see if any gap filling would be needed and if so you can make a decision there on how you’d like to tackle it. Sub-assemblies aren’t a mandatory step in model building, more if you’d prefer to work that way to potentially have more control when painting. Hope that was some help.
@saltytattie833 2 ай бұрын
@@TheCommandPhase yeah that was very helpful thank you, as was the video!
@TheBugB 2 ай бұрын
Are those THE fingers of the one and only command phase? Or are those a stunt double and this isn’t a finger reveal 😂😂😂 wth and I saying 😂😂😂
@TheCommandPhase 2 ай бұрын
They are certainly my hands 😂 Maybe later on down the line I’ll actually build a set to record properly!
@TheBugB 2 ай бұрын
@@TheCommandPhase Build a set of hands… Ur gonna join the Iron Hands? Ballsy
@TheCommandPhase 2 ай бұрын
😂
超人夫妇
Рет қаралды 32 МЛН
The Command Phase
Рет қаралды 48 М.
Sandman of Terra
Рет қаралды 451 М.
Standoff 2 Live
Рет қаралды 1,6 МЛН
Cleopatra
Рет қаралды 191 М.
КОТЁНОК ЛАЙК
Рет қаралды 479 М.
СИРЕНА СТУДИО
Рет қаралды 404 М.