COMPLETE Cerakote Shop Tour at Ultimate Reloader (Everything it takes)

Рет қаралды 73,508

Жыл бұрын

Cerakote Oven: bit.ly/380LXHE OVEN125 saves you $125 for ovens with circulating fan!
Full Story: bit.ly/3VEqMh4
UR on RUMBLE: rumble.com/ultimatereloader
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Following my official Cerakote training, I built a Cerakote shop here at the Ultimate Reloader Ranch. Today, we’re giving a tour!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Light Armor Ovens
- NIC Industries (Cerakote)
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Пікірлер: 130

@dremc94 Жыл бұрын

I recommend mounting a roll of paper to the top of your air filter for test spray. Then you can still use the suction to hold it in place but have exponentially more paper to test on.

@jasoncoye5321 Жыл бұрын

That’s a nice clean setup Gavin! Good equipment. After years of looking for a good affordable modern lathe, I came across your channel 3 years ago. Now, I have a PM 1440, and Atlas collet chuck thanks to your videos. Best Wishes and Happy New Year!!!

@michaeldunn150 Жыл бұрын

What a AWESOME set up Gavin.... Thanks for the tour!!

@ChrisNazty Жыл бұрын

I just got finished with my training yesterday and it was great! I was thinking of this video through my entire training lol. Thank you so much for everything you do Gavin, it is greatly appreciated!

@stridor0606 Жыл бұрын

Gavin, I would recommend High Temp powder coating tape. I used the blue high temp tape from NIC industries for awhile, but I now I much prefer a powder coat tape and I get it off of Amazon for much cheaper. We Cerakote tens of thousands of parts per year and this is now my new favorite.

@christiansmith9414 Жыл бұрын

amazing!!! Hope you have an even better 2023. Happy new year Gavin, Guy and the rest of the crew

@apfrye1833 Жыл бұрын

Thank you so much for this video. I have taken a lot of inspiration from this. The room with a patio door, the DIY exhaust and your overall OCD and cleanliness is super satisfying. I wanted to give you one suggestion that I learned at a training course (not the factory). Use a magnetic lab stirrer from Apera Instruments to stir your bottles and get rid of the noisy paint shaker.

@Anarchy-Farms Жыл бұрын

Loved the video! I'm thinking about getting into this and your video was (as per usual) invaluable!

@larrynieman4311 3 ай бұрын

This was very helpful for someone just getting in the Cerakote business. Thanks for sharing.

@joelhembree7116 Жыл бұрын

I like the way you have your shop setup and I think you're diy vent box is so cool.

@tonydevich7937 Жыл бұрын

Gavin thats awesome, glad to see ya getting it done

@finneranstudios 9 ай бұрын

I am currently 6 months into my degree at SDI for gunsmithing. I specifically did this course so I could start my own Cerakote shop! I had already looked into those ovens, and will be using your promo code! I did some coating back in 2017-18 for two local shops that unfortunately did not make it. Once I finish my school I will be going to get certified. Thanks for all the detailed information! I like how organized your shop set up is!

@georgedreisch2662 Жыл бұрын

Get your masking tapes off the window sill and out of direct sunlight. Also, a large swivel in front of and over your spray area to enable rotating a hanging part is helpful, especially to avoid handling misshapes, and insure more consistent application. Nice! Well thought through system. Thanks for sharing and Happy New Year y’all.

@kramr7012 Жыл бұрын

Wishing all the best in the New Year! Great content! Appreciate your ambitious work ethic!

@danielstuart3270 Жыл бұрын

Great video Gavin! The shop looks very cool.

@davidneville2558 Жыл бұрын

Gavin, excellence information and an awesome setup. However as a fellow Applicator with several years of experience please wear a Respirator for your safety everytime you are Applying Cerakote.

@krazed0451 4 ай бұрын

Most people don't seem to realise that organic solvents flash off at room temperature and are extremely bad for you, so the second you uncap the container you should be masked up with a respirator capable of dealing with the fumes.

@blly8325 Жыл бұрын

Wow your shop looks great. All the best to you and your business ! 👊👍

@jamesmooney5348 Жыл бұрын

Very cool Gavin, very cool. Thanks for sharing this

@20020x Жыл бұрын

Great setup Gavin, Thanks Yet Again

@OnTeamHumanity 5 ай бұрын

Thanks for this tour. It was eye opening. I'm going to have to get really creative to fit all this in my garage.

@waltermonical2653 Жыл бұрын

Great tour as always. Thank you for sharing great ideas.

@jasebrown9761 Жыл бұрын

Your living the dream, happy new year!.

@Ultimatereloader Жыл бұрын

Thank you! You too!

@charlesmullins3238 Жыл бұрын

My thoughts exactly

@j.m.k.3406 Жыл бұрын

Pretty slick . May have to check into it myself Happy New Year sir

@donaldrippetoe5246 6 ай бұрын

You did a great job! I really enjoyed your video! The shop is really well designed! Thank you for sharing!

@Ultimatereloader 6 ай бұрын

Thank you very much!

@letsemailjoe 5 ай бұрын

Great info, thanks for sharing!! Keep up the good work🏆

@4speed3pedals Ай бұрын

I have a cheap Harbor Freight unit and did many upgrades. One of the best is a cyclonic filter. Plumb it in prior to the dust collector. You will increase the life of the dust collector I bet twenty times over. I use a 5 gallon vacuum cleaner from Rigid and in 3 years of intermittent use and disposing of over 50# of dust, I have yet to put in a new filter but service it sorta regularly. All the dust is collected saving my vacuum filter and motor.

@petenewcomb6929 Жыл бұрын

Great shop very well done !!

@mlamar1980 Жыл бұрын

What a dream shop!

@unclebob540i3 Жыл бұрын

Great layout, excellent utilization of the space.

@Ultimatereloader Жыл бұрын

Thank you!!!

@michaeldarby2242 Жыл бұрын

Man..... I envy your set up. You have given me some ideas for my set up.

@RatelLaw Жыл бұрын

Thank you for sharing your experience

@LL-be3rh 11 ай бұрын

Love the setup, awesome

@ronhartle3268 Жыл бұрын

Living the dream man.

@Fishman138 Жыл бұрын

I love all of it! Great shop.

@lifegoeson05 Жыл бұрын

Wow! Dreams, I’m happy for you!

@Bushmasterpilot Жыл бұрын

Nice set-up Gav!

@LokalHotel 9 ай бұрын

Very helpful video with just the right amount of info. Thanks!

@jeffguy3868 Жыл бұрын

Amazing setup thanks

@johnvogh5445 15 күн бұрын

Nice shop!

@koosscholtz8266 Жыл бұрын

Gavin you can add more air reservoir space to your already storing capacity by running 2 or 3 inch lines to all your equipment and then reduce to whatever size you want. It will help safe your compressor not running for long periods at a time and it will add more air flow as well to your equipment .

@terrykleypas50 Жыл бұрын

Fantastic set up, I'm jealous

@____MC____ Жыл бұрын

I saw a cool video of making a air filter/muffler for the air compressor intake. It worked really good too

@sambenge9140 Жыл бұрын

As always you sir are a thinking man and you have built a bad@ss setup! Congrats! Probably the best setup in the country

@lens7859 Жыл бұрын

Nice and neat workspace

@thomaspuma434 Жыл бұрын

Lots of information thank you for your time

@EE9Civic Жыл бұрын

Sick setup

@inky8123 Жыл бұрын

Gavin is livin the dream

@gregstapp1684 Жыл бұрын

nice set-up Gavin ...

@charleshetrick3152 Жыл бұрын

Some kit to look for, I watched an automotive painting video. Guy had a spray gun the used a pneumatic take-off to run an in-cup stirring mechanism. He was spaying glitter. So like Cerakote needed to keep is stirred up.

@redclover51 Жыл бұрын

Keep up the good work.

@702havingfun Ай бұрын

Looking good 👍

@5stargunsandgear Жыл бұрын

Very nice setup my cerakote methods have been crude so far hope to have a proper setup soon.

@DavidHerscher Жыл бұрын

So this is what it looks like to have an unlimited budget and space. Living the dream my dude, living the dream.

@charleshetrick3152 Жыл бұрын

Sharpertek sells an ultrasonic cleaner that’s designed for acetone (or any flammable liquid) instead of water. It’s pricey but worth it.

@adambourque5717 7 ай бұрын

That booth is great for at home I like that a lot.

@stevemoy9834 Жыл бұрын

Wow I can do that. My hose is 5/16" with 90psi with filter. Nice setup.

@foonus406 Жыл бұрын

Sure looks like that Cerakote has a good business model. They sell the training courses and then sell you all of the components to do the work.. Win/Win Nice setup you built there including the line work, but long time followers all know with your OCD you will have those galvanized pipes above your spray guns taken apart and Cerakoted blue to match the air line by the next time we see them! 🤣 Have you run into a situation yet where there is a backorder or shipment delays getting a specific color you don't have in inventory? It would be a sizeable startup expense to have to buy any colors in bulk before you need to use them to prevent projects backing up. Thanks for the video, Happy New Year!

@darklyte24 Жыл бұрын

I did it on this budget, I used a 12$ semi clear plastic storage box, cut 2 glove holes in the lid , duct tape, 1 hole for shop vacuum 1 for air intake. 3$ Harbor freight rubber gloves, HF 15$ sand blast gun, 20lb of some aluminum media might have cost 30$, i think it was a HF 20$ spray air gun and 35$ cerakote w air compressor i had already. Not high end shop quality but it worked haha.

@digitalgoonie 11 ай бұрын

I think your shop is slick! I’ve been considering this as a second income. I’m not sure if I have any talent in it since I’ve not tried yet, but I’m considering a cheap garage setup to practice and see how I do. All I really know is I’m very interested in the whole process and love the look of cerakoted items

@marcgalloway1926 Жыл бұрын

You should 100% be wearing proper PPE. Going through the cerakote course that is something that they stress. Please put a disclaimer for the novice people that are watching to wear proper breathing PPE. Ceramic particles in the lungs are not good.

@jmflying Жыл бұрын

I am amazed he does not have ONE MILLION subscribers, gives the best advice easy to understand and very detailed. Thank you Gavin for the videos! HAPPY NEW YEAR

@krazed0451 4 ай бұрын

11:40 - You have the red tip on your #2 air outlet, you actually mixed the hoses xD

@robertfish4052 Жыл бұрын

Lovely part of the world there.

@sergej23kv Жыл бұрын

No matter you have filters, I hope that you don't cerakote without a respirator.

@warrenhoke1421 Жыл бұрын

well done shop that will allow a good consistent job. a little out of my price range.

@dandexinventor Жыл бұрын

Nice!

@rangermadeknives Жыл бұрын

I've been shooting my own Cerakote on some of my handmade custom knives for a few years. I like your setup and I really need to get an air dryer. Got any tips for how to clean up small specs of trash in your finish? Despite all my dust and cleanliness precautions, I occasionally get a speck or two in the middle of a blade. Stripping and reapplying is such a pain!

@joetrevizo08 Жыл бұрын

What about magnetizing your DIY spray gun holder so you don’t accidentally knock it over? Otherwise love the shop, looks amazing

@zandkapel Жыл бұрын

Nice setup you have! Is the metering valve upgrade worth doing to your skat blast? i've got the same model. Grts from belgium

@n.u.t.y. Жыл бұрын

Thanks for the tour, Gavin. An idea and a couple questions... If you have trouble with dust from the floor, you can mist the floor down with water before painting. How do you keep the spray booth temperature steady? What do you use for heat and A/C? What type of spray guns do you use?

@CalebWayneMcCready Жыл бұрын

Temperature does not present an issue. I am cerakote certified and do this for a living. The moisture in your air is the main thing that gives application issues.

@stoots1000 Жыл бұрын

Excellent video. One question... What do you use for your SVG files for your vinyl? Do you create your own or did you buy them? I see a couple of places selling the files in bundles so that you can use them as much as needed without having to rely on another company to purchase every time you have a firearm to camo... Any info would be great... Thanks much, and again, excellent video!

@BlackdogADV Жыл бұрын

Will you be doing outside work? I need to have a few things coated.

@michaellee6168 Жыл бұрын

You could make the acetone tank into an ultrasonic unit in the future as an upgrade.

@user-cz7zx2rj4h 11 ай бұрын

great shop if someone wanted to cerakote sks parts would you sandblast them first.

@kylechapman502 Жыл бұрын

As far as timers go... Get an Echo Dot so you can set timers hands-free. Its only a matter of time before you cover the timer with Cerakote because you have it all over your gloves.

@lauramcfarland2876 11 ай бұрын

What did you use to make your LPH80 holders? That is exactly what I need lol

@drdes9609 Жыл бұрын

What’s your utv set up? I’m getting one this year with a plow and I’m looking for recommendations

@johngreen2510 Жыл бұрын

Gavin, Would you happen to know if, in absence of an oven, you can IR cure the Cerakote? I have an IR lamp for doing automotive panels (solvent based paints/clears). Cerakote couldn’t give me a definitive answer…

@lounaticlouie Жыл бұрын

Nice shop. Hire and electrician... ;-)

@foonus406 Жыл бұрын

Plumbers and electricians mix like painters and flooring installers working in the same area. +1 for spotting why, would be cheaper to move the sink IMO. 👍

@wayne-oo Жыл бұрын

Breaker box next to a sink ??? Not too kosher.....

@jamesmooney5348 Жыл бұрын

Did you mention any where the over all cost of this set up?

@davekuzmanich2647 Жыл бұрын

Well you can tell that the governing body in his township has not been out to do any inspections because there is no electrical inspector that would allow that main switch that close to a water source. And that’s just within the first 3 minutes of the video.

@JohnDoeEagle1 Жыл бұрын

This 21+ years licensed professional HVAC technician agrees with your observation along with MANY other DIY things in his shop that I happened to notice. That was a 240 volt disconnect switch too, mind you. Not to burst his bubble but the "nerdy guy with glasses" is just like the "handyman husband" that can DO IT ALL and can't really do anything! BTW "It's hard to stop a Trane!"

@JohnDoeEagle1 Жыл бұрын

As soon as he would have said he was a engineer I would have stopped listening too!

@hebrewhooligan5462 Жыл бұрын

Idk if he is or is not sponsored, but I love the fact that he has an achievable set up that anyone who is really into it could have.

@volcom84bait Жыл бұрын

Just curios when you cerakote AR15 .. do you really have to remove the black paint.. or can you sand blast aluminum or acetone would work removig the black paint?

@marcgalloway1926 Жыл бұрын

I run my own shop in TX (Spartan Precision Arms) and you don’t necessarily need to sandblast the upper and lower since it’s anodized instead of painted. It is best practice but you can degrease/ clean with acetone and scuff with Scotch-Brite Red Scuff Pads.

@mikedebear Жыл бұрын

How did I not know you could Cerakote polymer items? Always thought the curing temps were too high for it.

@maxtheroofer8004 Жыл бұрын

Most poly gun parts start to fail at about 400 degrees

@VitruviunMan Жыл бұрын

Could I just buy your whole shop? On the cerakote website I’m guessing?

@AFpaleoCon Жыл бұрын

Why does that oven door look completely warped and not closed flush?

@lukef7304 Жыл бұрын

Surprised is not AC filters in that air vent box... even w the foam on top.

@TheEnduranceaddict Жыл бұрын

Need to seal the sliding doors off too.

@rogerseymour560 Жыл бұрын

So what was the entire cash layout to get everything started??? Ballpark number :) :) :)

@user-dg9bj5ct6e 9 ай бұрын

why not wear a respirator while spraying?

@jonlennon3348 Жыл бұрын

Where did you get that cap plug kit to cap barrels etc?

@marcgalloway1926 Жыл бұрын

You can purchase from Amazon or Cerakote directly under “Equipment”

@valentinvalentino5339 Жыл бұрын

Man, you are the best! Cool video!👍

@fredmcmurray6308 Жыл бұрын

I have a Winchester 1897 at a local gun shop to be cerakoted has been there 2 years now, it that normal turnover time?

@marcgalloway1926 Жыл бұрын

No. Typically turnaround time is a few weeks. Get your gun back and take it someone else.

@masone4589 Жыл бұрын

Should you thread a barrel that already has cerakote? Will it cause problems?

@Ultimatereloader Жыл бұрын

No problems there!

@riadmahadeen5818 Жыл бұрын

Do you take any apprentices

@chrisshumake83 Жыл бұрын

👍👍

@badkarma2202 9 ай бұрын

I can’t get over they charge you for bottom insulation when they should include that in the oven build also the hooks. They say creokote oven but no hanger u pay extra?