Basic spray Cerakote tutorial

Рет қаралды 70,071

Жыл бұрын

Luke and Dave cover the absolute basics to get you started spraying Cerakote. We cover a shotgun, a pistol, an AR15 and small parts.
#cerakote #cerakotecertified

Пікірлер: 72

@davexander4142 Жыл бұрын

Full time cerakote applicator and this video changed my entire view on spraying... I cannot thank you enough, really.

@preacher1775 19 күн бұрын

If I could use only one word to describe this video, it would be OUTSTANDING! After watching several videos on cerakote, this one is, by far, the most informative and easy to understand!

@PaganWizard Жыл бұрын

This was a very well explained process, and it was done in a manner to keep me interested. I have to admit that I was really hoping to see a picture of the finished and assembled shotgun, I;m sure it turned out amazing.

@user-bx9eo9bf2b Жыл бұрын

Great tips! Thank you for the video. Keep up the great work and vids.

@jeffwerner1291 7 ай бұрын

Great video.. i Painted cars for 10 + years and am now jumping in, trying to learn the full cerakote process. I have serveral guns that ive been wanting to do. Ive watched a ton of cerakote videos, and this by far, was the most the most informative. Really appreciate you taking the time to make this video. Definitely subbed 👍🏼

@gamallsdokkalfs7253 7 ай бұрын

A very good video. Thank you for sharing your process.

@bignik68ful 5 ай бұрын

Absolutely fantastic video

@keithgabel2799 Жыл бұрын

Another great video. Thank you

@CrossedRifles Жыл бұрын

Glad you enjoyed it!

@takactionphoto Жыл бұрын

Could you give some more details on prep cleaning, sandblasting, etc. great video you guys do a really good job!

@adolfomiliani7946 Ай бұрын

Best Video ever...It helps a lot...Congrats

@Tiebox 4 ай бұрын

Remove reading glasses off head to avoid coating glasses! 😎 Very detailed instructions, thank you.

@murdocks8242 3 ай бұрын

Thank you!!

@glenparshall94 Жыл бұрын

I have been spraying guns for 5 or 6 years now, and I learned a few things, especially about adjustments on the Iwata. I started with a Paasche when cerakote sold them. I have to say that the Iwata does give me more options to use, and now I know more about basic adjustments. Thanx!

@CrossedRifles Жыл бұрын

We're glad you got something out of the video!

@scorpio0281 Жыл бұрын

Comments like this really validate a video for people. 😁

@chrisshumake83 Жыл бұрын

Great video, I'm a fan of the repetitiveness, thank y'all 👍👍

@nykma81 Жыл бұрын

Great video thank you for sharing. Love learning new things specially since I want to do it in an hobby setting, and a 10 sided shape is a decagon and 12 sided shape is dodecagon, octagon is simply 8 sir.

@PatHaskell Жыл бұрын

I think he is implying that in a “cylindrical” object you need to divide it into, at least, 8 overlapping patterns.

@CrossedRifles Жыл бұрын

The next time I teach this method I'm totally going to try and remember the correct names for 10 and 12 sided objects. I was just a grunt in the army and not a geometry major but I still feel silly calling items with more than "8 sides" octagons!

@nykma81 Жыл бұрын

@@CrossedRifles I am 11bangbang as well, good shit!!

@ducatiist 6 ай бұрын

nice!

@Nottherealmario 4 ай бұрын

I need a full tutorial on what the guy did in the beginning 😂

@134ab Жыл бұрын

Great video - only question, is that a primer on the shotgun parts? If so what do you use? Thanks!

@tenryuu7806 11 ай бұрын

Im at NIC industries right npw getting cerakote certified, comparing your methods and theirs and there's so many good things here to help with Ergo

@CrossedRifles 11 ай бұрын

Thank you! There's no one way that is the most correct for everyone, but our goal is to make all coaters able to spray on the same level of quality!

@timmyl2005 2 ай бұрын

@@CrossedRifles well your definitely doing that with this Video im just a little curious as i run a Reg right at the Gun and just leave the air wide open maybe i should say flow Valve as its more of a flow valve i run the cheap but good the RP/1 ANI AIR Regulator So what do you Leave your Regulated air going to the gun set at may i ask? i know for say C series Cerakote it says 30Psi is that only when spraying Full out or 2 on 1 and any idea what you dial it down to to spray tight spots? Psi Wise with the LPH-80

@ssnydess6787 Жыл бұрын

What suggested techniques would you recommend for using on a WW2 rifle receiver that has faint markings? Thanks for the great video!

@jasonenglish4354 2 ай бұрын

I was here to find out if you can cerakote over existing bluing or If you have to take down to bare metal and use sone kinda primer

@ThePatriotParadox 2 ай бұрын

So alumahyde 2 is like the least durable when it comes to spray on finishes right? Then duracote...and cerakote the best, or gun coat....my cerakote slide lasted right over 2 years of heavy duty and holster wear.

@savagemako17 Жыл бұрын

Does that opening scene mean what I think it does?? Asking for a friend. Thank you.

@mountainsurge7235 Жыл бұрын

Do you have to put it in a oven afterwards like you would powder coating?

@canelocaramelo9895 Ай бұрын

What air compressor are you using

@ThePatriotParadox 2 ай бұрын

So you use 18ftlbs of pressure for your air mostly?

@TessyTTV Жыл бұрын

Where did the “15-18psi on the regulator pretty much all of the time with no real reason to change that” come from? Around the 2:49 mark in the video. I’ve ever heard that anywhere, from anyone. The recommendation has always been 20-25psi for H-Series and 25-30psi for Elite Series…

@joesquid6988 Жыл бұрын

... I second this. Although, I started with the recommendation, and dialed down to get the results I want .. I find myself at 18psi.

@bglenn2222 Жыл бұрын

NIC recommends 20-25 for E series and 25-30 for H regarding line pressure. Then adjust the gun down. I found that 16-18psi is where I have best results. Your mileage may very :)

@pauls.5815 Жыл бұрын

I'm doing KG as a hobbyist, maybe take on some light work. Doing smaller parts, what is the disadvantage of just using an airbrush? I have been using the airbrush with a 0.8mm nozzle and it has worked well for me unless I'm ignorant on something. I could see how doing high volume work would take forever. Doing small parts, slides, uppers, lowers, etc.. Is the airbrush fine? I can stretch the paint much further with the airbrush as well. I also don't hang my parts, I have a jig I made to hold and turn the parts I spray. I have a smaller oven so I cant hang them to bake them. The jig I made goes into the oven nicely. Of course I'm just doing one gun at a time. So I can fit an upper, lower, and a buffer tube in the oven at once, I can then do the handguard and outer barrel next.

@CrossedRifles Жыл бұрын

The biggest issue with an airbrush is the amount of material it sprays out. You can absolutely get it done, and we use an airbrush in lots of our techniques. But you really have to crank it up to lay down the proper amount of material and really get a true protection layer on the piece. If it's just for cosmetic purposes and the durability isn't an issue then an airbrush is perfect.

@vonkanon3091 3 ай бұрын

I have a Browning .270 BAR Lightweight rifle that I'm thinking might be a great candidate for Cerakote if I can't get it blued anytime within the year. I was told by two gun shops that it'd take over a year to get the gun finished if I wanted to go with bluing so now I'm considering Cerakote. The gun has a wooden stock so I don't want to go to crazy with colors, but it's going to be a gift handed down to my son. What do you recommend?

@CrossedRifles 3 ай бұрын

We typically use E Series Midnight on restorations.

@johncrawford9097 10 ай бұрын

Why don't you use disposable paint cups?

@rasychea Жыл бұрын

What size air line do you recommend using for the spray gun ?

@geoffniess1895 6 ай бұрын

1/4" Is cerakote just like shooting anything else. Paint, gel coat etc. Prep too, so CAN hand scuff it up ya? Then a "TONE" bath? If I don't hear I'll go with ya. I would have made to a 12 sided decagon myself. Or multi-facets. I mean what does a jeweler say Mr. Corrector over thay? Thanks man, looks fun and am excited to personalize wife's firearms...1st😮 27:43

@gsxr1k883 Жыл бұрын

What respirator do you recommend? Thank you.

@Chiefsheesh Жыл бұрын

Parcil safety is what filters he uses

@adrianfres2185 3 ай бұрын

No after picture of them assembled??? 😮

@bigshames 10 ай бұрын

That’s how you start a video

@ThomasShue Жыл бұрын

Jesus Christ, the material adjustments go on and on.

@saltyturtle1051 Жыл бұрын

With your bad shoulder is a job like this painful or pretty easy?

@CrossedRifles 11 ай бұрын

It's more painful. I have a hard time lifting my arms over my head without experiencing pain so getting the part as low as I can while still keeping it in my eye level range is the key for me.

@jasonenglish4354 2 ай бұрын

I guess we missed a important step in what he has already sprayed on the parts.

@mauricenunez73 11 ай бұрын

You explained all this 10X better than the guy from Cerakote. 👍🏼

@CrossedRifles 11 ай бұрын

Hey man, thanks for that! We try our best to break it down for everyone.

@Gunfighter5 Жыл бұрын

Why is the sky blue?

@CrossedRifles Жыл бұрын

Because God loves the infantry. What makes the grass grow?

@geoffniess1895 6 ай бұрын

@@CrossedRifleshow long is a piece of string

@rasychea Жыл бұрын

How many coats do you apply ?

@CrossedRifles Жыл бұрын

Can you be more specific to what exactly you're asking? We just do one coat on a single color item without any artistic additions. But we do spray over the item twice to get that one single coating.

@rasychea Жыл бұрын

@@CrossedRifles that answers my question thanks

@bighunk13 Жыл бұрын

10 sided shapes are called a decagon just fyi.

@FredDaddi Жыл бұрын

12 sided octagon

@allenwalters8812 2 ай бұрын

Why can't you put in a fishing swivel to make it easy to spin around?

@jamielowder1 Жыл бұрын

not 1 video on the webs shows primering the most important part

@96TTtrqmnstr3 7 ай бұрын

Perhaps because there is no primer with Cerakote big fella.

@stevenaustin5848 8 ай бұрын

Decagon, dodecagon

@garrettbunyard9673 3 ай бұрын

Decagon

@luisalfredodiazblake3966 Жыл бұрын

Hello, I would like to communicate with you by email or phone, I want to learn to paint with cerakote and I need your experience to take a course with you or where you recommend m

@CrossedRifles Жыл бұрын

Sorry just seeing this comment. Feel free to email us at Customshop@CrossedRifles.com