Composite Deck Build Time-Lapse 16x16 2nd Story

Рет қаралды 87,444

Жыл бұрын

This video is a time-lapse of the last project we installed in Northeast Ohio.
'Moringa' w/ 'Espresso' w/ 'Signature' w/ cocktail rail
Scope of work:
Install: ~280..sq.ft.deck "ledgering" to house ~112"elevation
Install: 5/4x6 'Fiberon Sanctuary Moringa' composite decking with pvc wrap installed w/ hidden fastener systems (main floor) (light brown/tan)
Install: 5/4x6 'Fiberon Sanctuary Espresso' composite decking with pvc wrap installed w/ hidden fastener systems (double picture frame, cocktail rail, & trim) (dark brown)
Install: 'Trex Signature' powder coated black aluminum railing w/ black sleeves & skirts w/ cocktail rail (Espresso)
Install: Double picture frame
Demolition and removal of existing deck

Пікірлер: 61

@ryanragains6672 9 сағат бұрын

Straight to the point, no bull shit deck build. Awesome job fellas. I'm really digging the cantilever supports. Definitely adds character to the build.

@deckbydesignl.l.c5091 56 минут бұрын

Thank you!

@garycarpenter2932 7 ай бұрын

nice job on the deck and song. nothing like some zeppelin to brighten the day.

@deckbydesignl.l.c5091 7 ай бұрын

Couldn't agree more! One of the greatest bands of all time!

@Langthao519 10 ай бұрын

You did a great job. I wish you every success

@deckbydesignl.l.c5091 9 ай бұрын

Thank you!

@eddyking5888 17 күн бұрын

Outstanding work my friendos, I only wish the video was half an hour long . Just to see all the details . God bless you all in Jesus name . Thank you 🙏

@deckbydesignl.l.c5091 16 күн бұрын

Thank you!

@joemanflyer2001 8 ай бұрын

Probably should have put footing of concrete Pilar’s on the posts to avoid long term rot. Also should have used higher railing like 42” or 48” cause of the second story. Don’t want it to be lower than your hood. Plus safer if you have children! Nice looking deck !

@deckbydesignl.l.c5091 8 ай бұрын

Sono tube piers above grade with Simposon brackets are a better method that lasts longer. However, it does increase cost significantly. We use 6x6 posts, even buried in the ground, should last 50 years.

@kadakunefe 7 күн бұрын

👏

@mycricketpassion Жыл бұрын

wow beautiful deck

@deckbydesignl.l.c5091 10 ай бұрын

Thank you

@howtodoitdude1662 Жыл бұрын

Beautiful job. Only three ties for the ledger? How are the posts supported?

@deckbydesignl.l.c5091 Жыл бұрын

The ledger has 5" "Ledgerlok" bolts every 16". Code only calls for 2 ties. We chose to use 3. Posts are sitting on mixed and poured concrete footers 42 inches deep, 16" wide, 120lbs of concrete per hole.

@jakefiorello9760 Жыл бұрын

Led zeppelin? Classy Gabriel, looks phenomenal

@deckbydesignl.l.c5091 Жыл бұрын

I love the Battle of Evermore! Thank you!

@adamwilkin2510 Жыл бұрын

Looks great!

@MrMcmovez 20 күн бұрын

Fuck yeah that was so sick

@deckbydesignl.l.c5091 18 күн бұрын

Thank you!

@joemanflyer2001 8 ай бұрын

Yes the cost is more … but it will not last 50 years. I just removed my old one that was there before mine. 17years. I built up with bags of concrete a 12”x12”x2’6” Pilar. And metal brackets for the 5 6x6 posts I had. Cost. $200. It was worth it.

@Nosferatu1022 Жыл бұрын

It looks like you cut back a cantilever. What exactly did you attach to the floor joists to support the ledger and what is the ledger screwed to? I have a cantilever problem at my house and I thought what you did here wasn't possible?

@deckbydesignl.l.c5091 Жыл бұрын

Great question. I cut the joists flush with the house, added blocking between joists where necessary, and used DTT2Z hangers to provide lateral load from the floor joists inside the house to the deck joists.

@mayersolopiano Ай бұрын

@@deckbydesignl.l.c5091 This is great. I have the exact same situation on my house. I need to tear down the existing cantilever, but don't know if I should use the existing cantilever joists and bolts on new joists parallel with it (with footings underneath that area, OR if I should do what you did and flush it all. But then do I attached a NEW ledger board after flushing the house joists? Anyways, great job, and thanks for this example!

@nancymaglio-western7040 2 ай бұрын

At 0:20, what are the 3 sections that have something sticking out? what are these things anchored to and what is their purpose? Great deck!!

@deckbydesignl.l.c5091 Ай бұрын

Great question! Those are deck tension ties. They anchor the new deck joists to the existing floor joists of the house to create lateral support.

@gwensosa3182 6 ай бұрын

Probably should have put water proof tape on top of the support beams since they will rot faster with rain coming through space of composite decking. Hate seeing hard not have longevity but it looks good.

@deckbydesignl.l.c5091 6 ай бұрын

We offer joist tape as an add-on. If a customer desires it, we install it. I've heard counter arguments that joist tape can trap moisture in the wood.

@rafaelmaya3093 10 ай бұрын

Nice

@deckbydesignl.l.c5091 10 ай бұрын

Thanks

@MichaelValencia 4 ай бұрын

great job! what's the weight limit on a deck like that? also what would you say is an appropriate estimate?

@deckbydesignl.l.c5091 4 ай бұрын

In order to pass code, decks typically have to have at least a 40 pounds per sq.ft. live load. So, maybe 10k pounds total. Definitely wouldn't put a hot tub on it!

@Jason-rw8yc 7 ай бұрын

I have a crazy question the ledger board and footing how do you determine there heights

@deckbydesignl.l.c5091 7 ай бұрын

We use a level laser to get a level plane. From that level plane, we measure up to the door. We then determine what elevation the top of the deck will be. In this video, the deck was right under the patio door. So we subtract 1 1/16" to account for the width of the decking and flashing. That's the top of the ledger board. Then, we subtract the width of the joist to get to the top of the beam. Then, we subtract the width of the beam to get to the bottom of the notch of the 6x6 post! If you don't have a laser, you can use a stringline level, but it's not as accurate.

@g-cgeneralcontractor8903 9 ай бұрын

Where is your flashing coming from under your siding? Going over your ledger board and between your deck Joyce as is code.

@deckbydesignl.l.c5091 9 ай бұрын

Yes. We put house tape behind the ledger. Then, once the frame is up, we put vinyl flashing on top of the ledger under the siding.

@elvillian Ай бұрын

How long did it take?

@deckbydesignl.l.c5091 Ай бұрын

I honestly can not remember.

@johnb9825 Жыл бұрын

Cool video. Felt sorry for the band that did the music... sounded like they were being tortured.

@CarlosLopez-hc9lq 10 ай бұрын

V i

@leesmith5419 Жыл бұрын

Why are there no emergency egress stairs on that deck

@deckbydesignl.l.c5091 Жыл бұрын

The customer didn't want to invest the extra money for steps and a landing, and the city doesn't require there to be any.

@stevelopez372 9 ай бұрын

@@deckbydesignl.l.c5091 And it may not be required anywhere else. Lol. People get confused about Dwelling regulations. Thanks for sharing, from SoCal.

@purselmer5931 10 ай бұрын

How the HELL did you get permission to use this song? (It goes perfectly, but I wanna know, lol.)

@deckbydesignl.l.c5091 10 ай бұрын

I juat played the song. I hope it's not a copyright issue. I never claimed to own the song or the rights to it.

@purselmer5931 10 ай бұрын

@@deckbydesignl.l.c5091 I think it may be one. I'd check for sure.

@sergv1890 9 ай бұрын

What is the joist spacing

@deckbydesignl.l.c5091 9 ай бұрын

16" o.c.

@bigdamnhero9751 Жыл бұрын

How much does that usually cost?

@deckbydesignl.l.c5091 Жыл бұрын

We design the decks using 3D models, then we create architectural plans, then we create a comprehensive material list, then we have our lumber company bid that material for us. We take our material cost and add it to our man hours, overhead, and profit. We bid each project accordingly. Composite decks are typically 50.00 to 100.00 per square foot. Some are more, some are less. It really depends on the design and material choice.

@ruzmetovkshful Жыл бұрын

@@deckbydesignl.l.c5091 Create for me 3D view, I want change my deck?

@deckbydesignl.l.c5091 Жыл бұрын

Www.deckbydesignllc.com Ghaasedbd@gmail.com 330 999 2163 Reach out to me and I can make a 3D model for you. We charge per model based on size and complexity.

@cosaosa2855 10 күн бұрын

And for only the price of a swimming pool...

@robertmenger3230 9 ай бұрын

why all the ff

@deckbydesignl.l.c5091 9 ай бұрын

I'm not sure what you are asking?

@ericmartin3396 Жыл бұрын

Have fun replacing those poles in a few years since you put them in the dirt.

@deckbydesignl.l.c5091 Жыл бұрын

Yeah, I imagine in about 50 years, these 6x6 posts may have to be replaced. Then again, so will the entire deck. Here in Ohio, code doesn't call for sonotube poured footers. If the home owners want to invest way more money into their decks, we can always use sonotubes, concrete, and simpson brackets. But why spend all that extra money for a deck frame that will only last 30 years anyway? Pine frames rot over time, and there is nothing you can do about it.

@griffinprice2956 10 ай бұрын

Well said.

@jackfarrell4727 9 ай бұрын

A ledger board on a house should be only for stability, never for structural integrity. I, in the old days would build decks like that, now I have bearing posts two or three feet from the structure. Also I like to make the bearing posts be the railing posts.

@deckbydesignl.l.c5091 9 ай бұрын

While I do agree that free-standing decks are always going to be stronger, I disagree with the statement that you can not ledger a deck to a home. As long as the ledger is done properly, it is a safe and sturdy way to build a deck.

@jackfarrell4727 9 ай бұрын

@@deckbydesignl.l.c5091 I agree. I am just saying that I do not build decks like that anymore. Why tempt fate.