COMPRESION AND TENSION

Рет қаралды 110,483

7 жыл бұрын

Falling a tree is one thing ,, bucking and servicing the log is another.. take a good look down the log, bucking actually takes thinking and assessment... do these things before ya cut. and ya wont have to call over yer partner to cut ya out,, every one gets pinched now and again ..

Пікірлер: 149

@TimTimTomTom Жыл бұрын

Learned the "cut compression first" rule from your channel a couple years back. That alone has saved me a lot of bs headaches. Good channel man. Positive vibes, and informative.

@joshuatracy162 3 жыл бұрын

The way you just tapped those firewood length marks in was amazing! Thanks for teaching me so much through all of your videos!

@chipjr10 7 жыл бұрын

Great advice, and excellent job. I wouldn't trust myself cutting that close to the stones. I would probably cut down about ¾ of the way and then roll the log over with my peavey.

@BuckinBillyRaySmith 7 жыл бұрын

thats good keep doin that,,, I do that when I cant see air

@ae86baka 7 жыл бұрын

Thanks for your channel, I learn a lot about forestry from watching. Really appreciate your humble attitude.

@BuckinBillyRaySmith 7 жыл бұрын

oh thanx for that appreciate you

@GoodDayFarm 7 жыл бұрын

Love how that saw sounds!

@BuckinBillyRaySmith 7 жыл бұрын

Me too

@eugenecrabs3954 3 жыл бұрын

Just bought a Pro Mac 10-10 with a 16" bar. It was almost new, all for 220 :D

@44musher 7 жыл бұрын

like the caption says we all get er pinched now and then, no shame in asking a question and great honor and sharing how to's to keep folks safe and working smart. peace from Maine to B.C. and all points between

@BuckinBillyRaySmith 7 жыл бұрын

cheers mate

@Zebracat5 15 күн бұрын

Your a master with a Powersaw Buckin. Old School all the way Brother.

@chancewayne88 7 жыл бұрын

Good advice Buckin' Im sure others feel the same as I do. Always ways looking for tips and tricks. Even if it is confirmation of a similiar technique, no matter how simple it may seem.

@BuckinBillyRaySmith 7 жыл бұрын

right on Chance

@dantco 5 жыл бұрын

Thanks!!! Knowledge is best when shared!

@nippinkoi8924 7 жыл бұрын

Great advice Buckin 👍

@rusttrail3 7 жыл бұрын

BRAA BRAA BRAAAAAAAAAAAAAAAAAAAAAAAAAAAA...love that sound

@joefalmo5528 7 жыл бұрын

good channel- love it- thanks for not cussing every 2 seconds. keep up the positive attitude

@BuckinBillyRaySmith 7 жыл бұрын

Joe Falmo thx for noticig

@GREMLlN 7 жыл бұрын

THE SOUND OF THAT SAW I LOVE IT

@BuckinBillyRaySmith 7 жыл бұрын

me to sammy

@alexesgate8033 7 жыл бұрын

nice job on the how to demo dr buckin .u say thank you to us for subscribing to ur channel I say thank you for having us join u on ur travels stay safe buck logs

@BuckinBillyRaySmith 7 жыл бұрын

yer welcome , I do it for you guys now

@cynthiaherr9029 7 жыл бұрын

I didn't know that either, Thank's for the info. friend.. Take Care and Be Safe..

@Rockjock007 7 жыл бұрын

Great advice... the only criticism I have is the lack of PPE.

@BuckinBillyRaySmith 7 жыл бұрын

you are right

@BuckinBillyRaySmith 7 жыл бұрын

Im workin on it

@tim8418 3 жыл бұрын

so unsafe, no glasses, hearing protecting, chaps, doesnt have a chainbrake and doesnt even wrap his thumb around the handle. this is the CEO of Wack n' Hack tree service lol

@shooter7a 3 жыл бұрын

True about the PPE...but all his advice is correct, and he is clearly a very skilled operator.

@steelonius 2 жыл бұрын

@@tim8418 Definitely not safety oriented and not a good example for it. Definitely not a hack, a very good excellent resource for tree work.

@TriddlerDD 7 жыл бұрын

Thanks very much for the video Buckin

@two-strokesmoke7289 7 жыл бұрын

People that want to learn about all things wood, and other things related to that; if they are not watchin' YOUR CHANNEL they are MISSIN' THE BOAT!!! ( so to speak) You have so MUCH valuable info here, Billy Ray!!!

@BuckinBillyRaySmith 7 жыл бұрын

oh , really .. that good to hear thx pal

@Dyno625 7 жыл бұрын

Good advice! Man I love the sound of that saw. You make me want to look for an old Mac!!

@BuckinBillyRaySmith 7 жыл бұрын

they are out there

@frankmoore3220 3 жыл бұрын

@@BuckinBillyRaySmith I am so old that I remember the singing ad: "You're in luck when you got a McCulloch Chainsaw"

@DirtRoadLanding Жыл бұрын

Preach on, BR 🪵🌲🪓🪵🪓🌲🪓🪵💚💚💚💚💚

@davidk.7264 7 жыл бұрын

Been watching every video s Buckin, just havevt had a chance to let you know how much I love them.

@BuckinBillyRaySmith 7 жыл бұрын

David Kissane that's pretty cool buddy thanks a lot

@aleksandarpavlovic1751 6 жыл бұрын

Great job Billy!

@oldder1 7 жыл бұрын

Sound good advice listen to billy he knows. Great advice

@lindanwfirefighter4973 7 жыл бұрын

Difference is Buckin, your not an amateur with the saw! You ARE the expert! It's not like someone pretending to be a doctor giving medical advice to the patient! You ARE the doctor! 😄

@cynthiaherr9029 7 жыл бұрын

Good one Rich I agree..

@BuckinBillyRaySmith 7 жыл бұрын

ha haa Dr Buckin Ha haa

@drumtravelfun 7 жыл бұрын

Well, that's how one should learn, from an expert ;)

@rhys5567 4 жыл бұрын

Best explanation.

@huck01955 7 жыл бұрын

I know your not a how to guy but its worth the time if you save some one from getting hurt or damaging there saw . I see it over and over . Great job :)

@BuckinBillyRaySmith 7 жыл бұрын

true enough

@mr.mrs.pathfinder668 7 жыл бұрын

Thanks for the tip, Buckin'.

@BuckinBillyRaySmith 7 жыл бұрын

my plesh

@loadeddog8840 7 жыл бұрын

Glad I looked over this one again... 😎👍🇦🇺

@turr2d 2 жыл бұрын

Man that saw sounds good! I need a four stroke like that one! lol

@imodm14 7 жыл бұрын

Thanks for this buckin', big help...You ever think of havin a 'how to' section of your channel, maybe you could call it the "buckin' beginners" ha ha

@alsims8280 5 жыл бұрын

I don't know if it's in the engine or the muffler design, but all Macs seem to have a deeper sound when they're pulling in the wood than any other saw. Hearty and mean!

@cheriwilliams5195 2 жыл бұрын

Nothing runs like a Deere, and nothing sounds like a McCullough- a sweet sound.

@russpartington4773 Жыл бұрын

Love that old Pro Mac! I've got an old 10-10 AND A 700.

@therealcslewis 4 жыл бұрын

Great vid, thanks!

@jmacca27 4 жыл бұрын

Anyone new to bucking should watch this, it’s great

@mclaughf 4 жыл бұрын

How is it that you jam the top corner of the bar into the log without kickback? Every thing I've read says to avoid having that part of the bar make contact with anything...just curious...maybe i'm missing something...love the videos...

@222boneal 6 жыл бұрын

A pair of safety glasses, chaps, and ear protection would be a great addition to the video. Safety always!

@abcd1234jason 5 жыл бұрын

Brad O'Neal and chain brake

@mikhailkimbel91 3 жыл бұрын

😂

@breakinstuffandlikingit6821 2 жыл бұрын

That saw sounds amazing

@Mixwell1983 2 жыл бұрын

I am a new chainsaw user and made the mistake of cutting the bottom first which was the tension in my case and when i went on top i pinched my blade.. took me 45 to free it.. Bucking a fallen tree on an incline that is sitting on another tree may not have been for beginners.. I will remember this tip, always compression first which makes sense because you still have some supporting wood.

@indiegemsthatjam3986 Жыл бұрын

Fellow amateur as well ... but thanks to the generous teaching of Buckin Billy and others on YT, I safely made it thru 18 storm scattered, 30' Leylands with my 1st chainsaw ... an $89 HyperTough from Walmart. Got in shape, and got my yard back! It helped me to recall this essential point by following the alphabet ... compression 1st , then tension

@johnsommerfeld6889 7 жыл бұрын

Nice job Billy!

@BuckinBillyRaySmith 7 жыл бұрын

Thx Jonny

@waverlywhitaker7391 6 жыл бұрын

Thanks My good sharp chain!!!!!

@agriprotreeservice4370 7 жыл бұрын

Ever think of bringing nice export logs like that home and stock piling them till you get a full load to send out? Storm totally missed us in Olympia, was it pretty bad up there? Heard 70-80 mph was expected...

@BuckinBillyRaySmith 7 жыл бұрын

seen alot worse

@jasoncagle2434 7 жыл бұрын

its ok not to call yourself how to but I sure have learned alot form this channel thanks

@BuckinBillyRaySmith 7 жыл бұрын

thx jason

@famasmaster2000 6 жыл бұрын

Music to my ears !

@fbgmroadrunner456 3 ай бұрын

Young guy here just got an MS211 to start fixing up the property. This makes me cringe watching you cut over gravel! Man I can’t wait until I have the same control as you.

@shawncapps4515 7 жыл бұрын

Nice To You Again Buckin.

@M4cRossC 6 жыл бұрын

That saw is a beast

@zachd150 2 жыл бұрын

Buckin' at 1:28 when you jab your saw into the log- I'd say you were showing off, but it looks like you've done it so many times you don't even think about it!

@5herwood 6 жыл бұрын

Thing that scares me is the tension you don't see, like when some branch is sprung against another trunk and wants to drive an end into your shin bone when you cut it loose.

@puksrasohchurrun 6 жыл бұрын

Oh i feel your pain especially when your used to a couple different species then you get in to eucyliptus for a change. A whole different kettle of fish. And the smaller the limbs are the worse it gets. A trap for young players we like to say

@imcsmitty 7 жыл бұрын

WHOEVER IT IS THAT HAD THIS QUESTION, if the top is what has the tension, what I always do is cut down far enough I can throw a wedge in the top then finish the cut. Works well for me.

@BuckinBillyRaySmith 7 жыл бұрын

Jacob Iget what yer saying but if I am not old and senial yet ,, compressed is pinch ,, and tension is blow up so wedging compresion yes, wedging tension there is no need smitty I no what yer sayin , and I also no that you want to be correct in your wording cause thats the kinda guy you are startin out SMITTY'S TREE , LOVE YA bROTHER ,,, REMEBER iM WATCHIN' ,, AAAAHHHAAAA LOL

@imcsmitty 7 жыл бұрын

Buckin' Billy Ray Smith... just go cut a tree hahah!!!

@puksrasohchurrun 6 жыл бұрын

Smitty's Tree & Lawn Care yah thats the one also another thing i picked up was to make a small cut in the top only a few inches or so, then move over and inch and bore cut in and down. Works well for cutting stumps off wind blow. Or ya could cut from bottom up its the same thing but i like to work with gravity not against her

@slpc30 3 жыл бұрын

I just subscribed awesome video

@markjoudrey7036 7 жыл бұрын

Dr Buckin.I like that .Whens the clinic open.any chance to see the old 266 in action

@BuckinBillyRaySmith 7 жыл бұрын

oh ya , I take it out with 2100

@shadwell749 5 жыл бұрын

Good info

@44musher 7 жыл бұрын

I'm just here to hear that old girl gargle !!! love that old school.... style..... zipped

@branchingdowntotheroots7505 Жыл бұрын

Love it.

@finksies23 7 жыл бұрын

That saw is-a barking! Brap!

@BuckinBillyRaySmith 7 жыл бұрын

ya brother

@dainbeckersr8881 2 жыл бұрын

The Best 🤙🏼

@mrwizzardknight 3 жыл бұрын

No chain break?

@waverlywhitaker7391 6 жыл бұрын

My Brother Thanks!!!

@BuckinBillyRaySmith 6 жыл бұрын

YOU ARE MOST WELCOME

@Catweazzle 6 ай бұрын

That power saw sounds amazing. ⚡️🪚

@southboundtp2067 6 жыл бұрын

What's the best way to cut a big oak, NO limbs that's laying flat on the asphalt but NO way to lift, move or get under it. it's basically a log? ? ?

@puksrasohchurrun 6 жыл бұрын

SouthboundTP this may be a bit late but just experiment. Youll find what works and what doesent. Your common sense will take over when you make a start on it. Keep safety on the brain but dont overthink it.

@steveparsons2553 7 жыл бұрын

nothin like a good swift blow to the abdomen when runnin a 120cc saw that will get your attention real quick then you'll remember tension and compression

@BuckinBillyRaySmith 7 жыл бұрын

lol

@dillgross6758 3 жыл бұрын

Good man.. Good man..

@donc81 7 жыл бұрын

Looks like you're on another storm clean up job. How high did the winds get? It was pretty mild down here over the weekend

@BuckinBillyRaySmith 7 жыл бұрын

8o k i thinks

@connorsegren6066 7 жыл бұрын

Donald Cisney 70+ mph for the Americans 😅

@tillman40 5 жыл бұрын

Sounds like a hot saw! What fuel do you run

@BuckinBillyRaySmith 5 жыл бұрын

STOCK SIR 91 OCT 44:1

@two-strokesmoke7289 7 жыл бұрын

JUST LOOKED AT TRACK AND CONFIRM, those heads are in Toronto, 1:49 pm Oct 19 still be a few days I suppose....... just a note on them, the PLUMB is fairly decent I think, the other is, well; to coin a term, an "archaeological axe" ; it does have fairly decent edges however.

@BuckinBillyRaySmith 7 жыл бұрын

awesome george

@izatt82 7 жыл бұрын

man that old saw does some work. dang

@BuckinBillyRaySmith 7 жыл бұрын

she s a killer queen thx

@eldoradowoodcrafthobbies3888 7 жыл бұрын

Sharing w/yellow&black

@clatechilders856 2 жыл бұрын

Is that the Pro Mac is 10-10?

@daw162 7 жыл бұрын

That saw sounds like a million bucks

@BuckinBillyRaySmith 7 жыл бұрын

nice eh dave

@johnlincicum6390 7 жыл бұрын

David W And looks it too! Nice paint on it still!

@jesseryan4053 7 жыл бұрын

Dude what kind of saw is that?? Thing sounds freakin nasty!

@rusttrail3 5 жыл бұрын

McCulloch 10-10 I think, a lot of the smaller McCulloch saws have this sound, like a pissed off bumblebee 😆

@jpw9560 2 жыл бұрын

If you cut straight from the top wouldn't the weight of the log open the cut and make it not pinch at any point? Noob here and just trying to learn the hows and whys.

@glennfiedler6236 2 жыл бұрын

And then when the log drops on yer saw, what happens?

@jpw9560 2 жыл бұрын

@@glennfiedler6236 Drops your saw with it.

@glennfiedler6236 2 жыл бұрын

@@jpw9560 Negative. Drops onto your saw and pinches it mate

@daveb3505 5 жыл бұрын

I woulda made a REALLY dull chain doin that hahaha

@dieseldust76 5 жыл бұрын

Dave B , same here. He made it look easy. Cut through it like butter.

@TheDudeway Жыл бұрын

I am honest, the way you cut I would have to deal with a lot of kicks. Don't know why you can make it work ? Guess it's talent

@rontrulycanadian995 3 жыл бұрын

Would love to be Billy's neighbor.

@harrisonp3727 7 жыл бұрын

cool

@BuckinBillyRaySmith 7 жыл бұрын

right on Harry,, lol harrison I ve always like that namw for some reason

@laurastone6578 3 жыл бұрын

Am I the only one that doesn't have the first idea this guy is trying to make?

@liammackenzie2130 5 жыл бұрын

nice chain brake 1.27

@BuckinBillyRaySmith 5 жыл бұрын

MY FAVORITE KIND ,,FACTORY OPTION,, NOT RECOMMENDED FOR CHILDREN LIAM, THX FOR WATCHIN'

@adelarsen9776 2 жыл бұрын

C come before T in the alphabet. Compression then Tension.

@georgejameson1003 3 жыл бұрын

Who's giving this thumbs down? And why? Show yourselves! Explain!

@seanlyman6034 7 жыл бұрын

Not a "how to" channel?!!! Damnit!! Now what am I going to do?!

@BuckinBillyRaySmith 7 жыл бұрын

Sean Lyman ha ha lol you dog. There's always Wrangleboy

@daw162 7 жыл бұрын

haha :)

@johnlincicum6390 7 жыл бұрын

@Buckin' Let's not even go there! I had to find that series of videos he made and just watched like video #4 on it with the jack and almost couldn't believe it! He's a nice guy, but jeesh! I couldn't watch it all! Lol!