I realize I’m commenting on a 7 year old video, but man I LOVE the way you explain things man. How you slowly talk so we can fully understand each and every word you say REALLY helps me retain the info you give. I have extremely bad ADHD

Why doesn’t this guy have like 2m subs

I don't what what it is about you but you and your videos are really interesting and your personality makes them a whole lot better

Thank you subscribed today. You do a great job explaining things and I love how you edit the content as well

I know this is an older video, but the video was very much needed for many people. Great content on all of your videos man. Thanks for taking the time.

happy your channel is starting to take off 👍

thanks for the video keep it up, BTW you deserve way more subscribers

Is just me or someone else love how his microphone pick the sound that the tanks make when he puts them on the table or against each other.

We’ll done bro this was a perfect video I tried watching another one before this and nearly fell asleep plus learnt next to nothing useful. Big up from Australia man 🤘💛

Videos are soo good needs way more subs good info and paintball knowledge

Great video man. You definitely need more subs

Great channel the quality is great When I saw you only had 13k subs I thought i miss read it as I expected you had over 100k

Paintball saved my life!!!!!

Love the vids, you're doing a fantastic job! Wanted to add a few pieces of information realizing you likely left this stuff out to keep it simple for the audience that the video is intended for. First, a minimally significant comment - shot count from tanks can't be exactly stated as a function of the tank's size as it will vary depending on your gun's air efficiency, velocity, and even possibly the climate conditions of the day, so keep that in mind folks. All that said, I think the estimates you give using beginner to mid-level equipment on average sets the right expectations. I know you're not a fan, but I have not had any bad experiences with my four (4) Guerrilla Air (now, as you have pointed out, the company is called First Strike) tanks aside from a couple of very slow leaks that I have also had with some of my Ninja tanks. There are about 6 nice things about First Strike tanks: 1.) The price point tends to be lower than a few other companies 2.) They have a "super light" bottle option called "Hero" 3.) They offer burst disks in the reg nearly flush with the body so they can't dig into your arm 4.) They offer an adjustable reg similar to the silver collar on the Ninja V2 regs that allow you to adjust how the gauge and fill nipple line up 5.)They offer bottles that you can get re-hydro'd forever 6.) MOST IMPORTANTLY - the reg is much shorter than most compressed air tank regs which allows additional options for sizing and fitting tanks to the player and their equipment....for example, a smaller player might be able to have a larger size tank as a result of the bottle being closer to the ASA. The smaller reg also makes the tanks marginally lighter too when compared to others using the same bottle. *One point of caution is with some guns the reg is too short and can prevent the bottle from screwing all the way into the ASA, so players should check or ask about this before buying. All this said, the tank I use and like most is actually my Ninja SL 68 with the V2 reg Do wish it had First Strike burst disks though Last thing I'd add is for the beginner players you should show them where and how to read the date on the tanks so they don't buy a crap used one or ensure they select the freshest one from the store new. Sorry for the novel, hopefully it helps someone. Keep the vids coming, you're doing the sport a great service!

The size comparison between the regular 68, 68 SL, and the 77 SL was great and super helpful. I haven't played in about 15 years and just read about the 15 year lifespan of carbon fiber bottles... So I guess my goggles aren't the only thing that need replacing. At least my Tippmann A5 is still relevant.

Super helpful dude! Big thanks!

Ive been needing an 80 or 90 tank. Currently lugging around two 3k alum tanks coz they're ridiculously affordable. It'll be a dope day when i do get one tho. Cool vid, 👍✌🍻

I feel like I saw you at Davis Paintball the weekend before last. Anyways, great video. Very thorough and well thought out.

Your videos are super helpful bro thanks

One of the best paintball channels

The 68 and 77 UL fit best for me but the weight savings of a 48/50 is so awesome. I used to have a 48 or 50 (forgot) but instead of a stubby shape it was longer and narrower to be closer in length to a 68. It was my all time favourite but eventually had to retire it after its second hydrotest

The v2 regulator is meant for airsoft guns to help with the refresh rate on support guns

Tanks for explaining in simple terms you do a great job.

Love the details and descriptions, need a carbon fiber tank asap

@8:28 you don’t get enough credit for your seamless editing skills. Come back brad 😭

I play with an old Dye DM4 which is super heavy so having a larger tank pushes the gun out away from me which makes it really hard to hold up all day while shooting.

Greetings all. Awesome review. I always wanted to know if the ninja SL tank was slimer and shorter then the gray ghost tank. And now I know. Also, loving the live Saturday videos. Thanks.

I want to get a 68/45 ninja tank but I’m having trouble on finding what take is best for my gun I’m pressure wise. I have a empire axe pro should I get a high pressure tank or a low pressure tank or does it not matter ? Please help

Great job 👍🏽

tanks for the video....

What would you recommend for a tippmann tmc with air-thru minus the stock cover

What would the best regulator on the ninja tanks for my Planet Eclipse GTek? My local field said something that can be adjusted for the 450-550 recommended PSI

Great video, I've got a question for you! From your experience playing over the years, what would you suggest are the best tank options for rental purposes? If you had a paintball field & rented our equipment what would you use & why! Thanks, Graham Armstrong

So what youre saying is that the aluminum and or the carbon fiber tank can be used to fill Pcp rifles...am u correct? Thanks man great vid.

SL45 OR SL77, not sure which one to get. Length wise is there a huge difference?

Question first off awesome video so no to my question I just purchased a valken m17 it uses a 13ci 3000psi tank can I use a tank that is over 3000 psi or will that damage my gun I know that the ci stands for cubic inch size of the tank and psi has to do with how much pressure so if I use a tank thats 48 ci at 3000 psi I'm ok but what if I use a tank that's like this for example Ninja Pro V2 68 ci 4500 psi Lite

The Empire 80 Tank that was used in the video. Would that be closer to the Ninja SL2 77 or to the 68?

what is the lifespan of the bottles compare? Carbon fiber tanks have a 15 year lifespan vs lifetime with all aluminum as long as hydro and Vib are done.

Don't know if anyone has mentioned it, but there are also thread extenders for those guys that want a longer feel for a HPA tank but don't necessarily want a larger tank! I'm 6' 2" (approx), personally I do not use one of these but I also use a 77CI Ninja SL tank, which offers a little more length than a 68CI, for an example.

Just bought a used Empire Axe, i have a 68/4500 Empire Carbon Fiber tank, and for some reason the regulator pin doesnt fit for the Axe ASA 🙃

Hey man i have a 74 cubic in tank problem is that there’s not alot of places to get then filled here apparently because my tank has a female connect or a disconnect but alot of places do not have the equipment to fill it, im in California in Los Angeles im trynna see where to fill it which has been hard because i have called alot of places and nothing

I just got a ninja SL2 i couldn't believe how much more it weighted when it was filled normally with a flat bottom you cant tell but since its already so lite i swear it doubles in weight

Whats opinion on first strike tanks ? Also with tanks that I can add something that says like 200psi-300psi , 800psi-950psi

Hey man will the 80 be good for air rifle shooting

Hello, what is the best tank for the mini gs? I am 5 feet and 4 inches tall .

For the 3000 psi tank you were showing at the beginning would it fit in a 2L hydration carrier if I replaced the water pack I’m going to use it for hpa in airsoft

Good video, just FYI, airflow rates are less consistent in low-pressure systems like paintball markers. Then they would be in higher pressure systems. :-) :-)

what should i do if i get a low pressure gun?

Question, are you able to use your own home compressor to fill the tank, for example like a Dewalt pancake compressor, so many options can be a bit confusing

Does anyone recommend first strike hero tanks? Does the low pro gauge touch the grips?

What would you recommend for my tank I’m 5’5 and I’m either getting the mini gs or an axe 2.0. What do you think would be the best fit

I'm 5'3 not big at all do you think the 50 in a good size for me

For the 13cui in co2, videos are telling me I can get about 400-600 shots. This video says about 100 shots for a 13 cui (compressed air). Is that accurate?

Do you use this with a line ?

yes! fineally thank you so much

"yeah" !

Can I use this for a airsoft hpa setup

Somebody knows wich is the lightest tank in the market? Maybe a 77 or a 68

I’ve noticed now that you can get the tank cheaper one of the lads on the team I play for orders a empire carbon tank from a shop near us and he asked can he get discounts on the tank if he don’t have a reg because he already had a ninja pro reg that he had on his old steel tank and they gave him £50 off the carbon tank without a reg

i have a tippmann tmc i just bought a couple days ago..i plan on carrying the tank around my waist , .which would be the best tank for my tippmann tmc? also what does the 3000 and the 4500 stand for??

My brother has a 68ci 4500and I have a 48ci 4500 so how much can his tank and my tank hold and what’s the difference

Why dont they make tank sperical shape. Wont that be more storage and stronger and lighter?

Would have been nice to line up as many tanks as possible in a line simultaneously to compare sizes.

are gladiatair tanks any good?

Okay so i heard the mini gs supposed to only get 200 psi, but i bought a 68/4500 and i think it puts out 800 psi out of the box. Am i wrong? But should i adjust the regulator down to 200 to match the gun?

Want to know the difference in shots between the 68 and the 77

So which ninja tank is the better???

Love this video! I was wondering though (since I don't find a lot of information about this) how you fill your HPA tanks. And how can you be self-sufficient in filling your HPA tanks? The only thing i've found was that you need a 4500 psi compressor, fill a scuba tank and then fill your paintball HPA tank with the scuba tank. Is that correct? What compressor would you recommend? Thank you in advance for the feedback!!

I have a first strike light and and it’s good but I want to get a super light ninja

So a 48/4500 has around 750-800 shots ?

Anyone know the outro song? He didnt put in description. :/

Do a personal gear bag review on your setup!

love your hat

What are your thoughts on first strike 62/3000 flat bottom tank?

That Intimidator is DOPE AF. Do you still have that gun?!?!

Hello sir i need help should i either buy a tippman tmc or a speed ball gun like the kaos 2?

the Sl68 can consistently shoot up to 10 pods air capacity

hey first question is can you do a review on a clone 5? If you can't get a hold of one I'll gladly send you mine to do a review. Second question is how much do you want for that RL Timmy you used in this video?

I have an Empire axe pro, I was thinking of buying a new HPA tank and i'm considering between the two, the empire ultra or the ninja SL77? any advices?

I was just checking the Ninja SL carbon fiber tanks and it seems as though all the sizes above 45/4500 have been discontinued. Any reason for that? I was gonna pick up a 68/4500 based on your review but don't want to jump into anything that might have an issue! Any feedback would be greatly appreciated!

how much does the composite tube cost

What do you recommend? First strike compressed tank or a empire one?

If I have a mini gs, and I use a tank with standard 800 psi output pressure, will it ruin the gun? The only reason I ask is because it says that the mini gs operates at low pressure.

IF i have an Electric Gun and I use a tank that's 48/3000 will it have negative effects on the gun?

Thank you for the video! It was very helpful, as usual, and extremely informative to a newbie like me. I just bought a hardly used Spyder mr1 (maybe shot 100 times, probably less) and it came with a couple CO2 tanks, but I don't want to mess with CO2 I want a compressed air tank (have a hand pump to refill air tanks cause I own a PCP air rifle) and I don't want to spend a hundred bucks + on a tank, especially considering I paid $35 bucks for the gun, Hopper, a couple of thousand paintballs, couple ball holders. Between the two guns I'm sure they will be shot less than 50 to 100 times per year. The paintball gun is just to shoot at the deer that come in the yard because I don't want to shoot them with the air it's way too powerful !! I've never owned the paintball gun before but I realize I'm going to need to do some maintenance on the one I purchased such as replacing the O-rings Etc. If you have a lead on any mr1 repair kits or used air tanks let me know please. Thanks again for all your info! 👍👍👍

What kind of tank should I get for my tippmann tmc

how many shots will an axe pro get on a 48/4500 tank

Do I need to get my own tank if I’m just a weekend walk on player? I play with a jt impulse

im getting a transluscent black ninja carbon fiber tank with an ultralite regulator

For tippmann A5, is a 4500k tank worth getting? Or doesn't matter

Song at the outtro?

are you playing any events this season? what division are you?

Is there any way to adjust the nipple and gauge placement on the ninja ultralite regulator so the nipple is pointed down and gauge pointed up? Somehow that's how my shop set mine up when I get my carbon tank back then. Is the nipple longer on UL than prov2 any help is great appreciate. Thx

Would upgrading to a compressed air tank really make a difference when I’m using an entry level spyder that’s fairly old? (Should I wait until I make a step up in gun?)

Im new to paintball looking to buy a gun which one would you recommend starting with

Would a 48/3000 tippman tank fit on a kaos 2?

Could you do a livestream tomorrow at about 2:00 pm pst or on Friday at about 11:00 am pst?

I have a carbon fiber 684500 but I really can't think of why my friend who is new to speedball shouldn't just get an aluminum 483000; given that you can just fill between every match vs every other match.. I think I might just sell mine. Anyone have some input?

Your link for all the gear u like isn’t working I’ll say like “their isn’t any recommendations”

Paintball just like real guns. There's not too many absolutes yeses and Nos. It's a lot of it's a little better here and there. So it really always does come down to preference. Good comparison vid tho