The compressionless housing also works great with rim brakes! I use it on both my bikes with Paul Racer and Racer M brakes.

Thanks for the AWESOME tip. I’ve had my Redwood for almost a year now. The only thing I change off the start is the seat. Everything else still original. I will most definitely be upgrading cable housing real soon.

Thanks for the tip! I had the same issues and tried the Dura Ace cable set. Its the first time my Canti Rando Bike actually stops.🤩😉 All the best from still cold Germany!✌️

Great video, thanks for the explanation. I think I'll give this a try on my 6061

great video, stuff I remeber from mountain bikes before hydraulic took over completely (Avid BB7's and only one pad moved :O ) . Thought it was weird that both mine and my wifes cable disk brakes were so much worse than I remembered our mountain bikes were. Got some new pads and better cable and night and day. the stock cables on mine were cheap rubbery type and my wife's were just cut at an sharp angle allowing them to compress at the lever and caliper.

I bought these to put on a bike I used with cable pull hydraulics. Damn! What a difference it made! I bought the cable pull hydraulics because the OEM brakes were vague at best, the cable pulls helped some, but, not much, the housing made all the difference. I probably could have just bought the housing and solved the issue in the first place.

idk how i got back to this video , ive used this stuff twice its really good , only had enough housing to do my bike twice , if you dont use this for your shift cable like i did you can do 3 bikes

I think it’s great when frame makers allow routing to be full length housing compatible for shifters and brakes. My brakes are hydraulic Hope RX4 so obviously my lines are full length sealed but on my frame externally routed to the rear and internal through my fork to the front. But with that said I definitely use Jagwire shifter cable and housing and I have the polished cables. That’s means no coating that deteriorates with exposure and usage. Think of that Teflon coated pan that you cook eggs on every morning. Coating is not as good as polished, in my opinion. Looking forward to seeing your build. I’m looking to build up a second gravel but something with flat bars this time.

Nice riding man!

Nice video! I know other Redwood/X users also take the next step swapping out to dual piston TRP Spyre calipers or cable hydraulic brake setups such as the TRP HY/RD or Juintech F1. Shimano ice rotors also give a nice weight reduction and the possibility to use metallic brake pads for more bite. Looking forward to seeing what upgrades you go with!

Totally gonna try this 🤘

Great video! Compressionless all the way

Did this upgrade a few years ago on a bike with Spyres and it was awesome. One major downside though is it is way less flexible than normal brake housing. I could not for the life of me get the housing through my bottom bracket area which required a tight bend. I ended up splicing in sections of coil brake housing along the route and connecting them with ferrules. That was a fun weekend

Been suffering this exact issue on my Poseidon X which I love for basically everything but it's poor stopping. Putting this on my weekend to do list!

Just to stress the point made in the video, never use shift housing for brakes. It'll burst longitudinally. In addition to the difference in diameter, compressionless housing has an extra reinforcing layer of kevlar or metal.

I did this to my redwood drop bar and it’s a big difference. The stock brakes are almost dangerous to use

Ooh, I kind of find having the same issue with my spyre brakes, no matter how new the parts are, it still gets that spongy feeling quite fast.

Off topic. But you have cool bike tricks there 😲😎

Interesting video. I'm wondering if you have any experience of the Jagwire Elite Link housing/cable system and if so, how that compares with the compressionless housing you're using here?

The bike shop nearest my place didn't know what compressionless cables are. But I was stubborn (and excited) so I still asked them to put the cables on along with my JuinTech brakes The result was a vague and sponge-y feel just like Bike Sauce said in the video. It was very disappointing and I'll probably have this serviced again Would you happen to have a guide on how to install brake cables that's relevant to compressionless cables, Bike Sauce?

Holy smokes Professor Sauce is that you doing the fancy bike moves while you're testing the new brake housing? Pretty slick with the stop start bunny hops and pivoting the back wheel.

I swapped it with Compressionless Jagwire Brake Housing as well on my Redwood, the difference is not night and day, but yes, good improvement :)

Can you make a more in-depth video where you actually go over the whole installation from start to finish? I tried to do it myself following this video and gave up.

No more filing housing ends? Yes!

Would you be able to do a more in-depth/step by step guide for installing the brake housing?

DAMN!

Any chance we'll see that "full upgrade video" you mentioned you were working on? I'd love to make the upgrade to compressionless on my Poseidon X based on this vid, but as someone who's new to tinkering with bikes I'm apprehensive of doing so without a guide to follow.

I changed my housing to Jagwire KEB-SL but didn't notice some big change in braking power. Generally they work, but they are not as strong as I would like them to be. I cannot for example block front wheel. I have Tektro MD-C550 brakes Rotor Shimano SM-RT56 Resin Brake pads EBC CFA327 What do you recommend? Should I change the brakes or change pads to semi-metalic I heard that quite often people complain on these Tektro brakes but I also come across posts or comments where people say that they are really good brakes. I'm confused

What type of brake cables did you use? I have mechanical Tektro's on my Diverge and was hoping for a "cheaper" solution then going with TRP Spyre of switching to hydraulic. I really enjoy your informative content.

I just installed a set of these on my new X. They seem to work fine. Definetly better than factory housings but I cant find any info on if I should have put end caps on the end inside the hoods. They didnt seem to fit so I didnt use them. Did I eff up?

Hi, is this any better than the Jagwire Road Elite Sealed brake kit? Will be using it on mechanical discs. I figured that the elites doesn't have the Kevlar material in it.

I wonder if you can use bmx compression-less brake housing for this purpose. They are 5 times cheaper.

Did you eliminate the inline barrel adjusters?

Besides the housing what mechanical disc brakes do you recomend? Tks

Maybe. The Tektro pads packaged with the Redwood should be illegal they are so bad. I did not need compression-less housing, I needed quality pads, and to sand them down to 75% material to allow fine caliper pinion adjustment (and caliper alignment) on the bike. The Tektro MD-550 do not have enough adjustment at the frame on this bike, and that needs to be revised. After the sanding of the pads, fine tuning caliper position, adjusting the cable tension to be correct, and moving both pistons in as close as possible without rubbing the rotor - Anyone can achieve a firm grab that starts early on the brake lever stroke. The bike needs to be adjusted properly. The pads should go in the trash though, facts.

How much is the difference between these with rim brakes? Is it noticeable?

Teflon-coated cables also exist, maybe they'd make brake feel even better

Thinking about putting this on my State 4130. Saw another video where someone did this upgrade but only for the back brakes because of the possibility of locking up the front wheel. Did you run the same cabling to your front brakes?

Why do bike manufacturers even use brake housing that compresses that much? If it's that big of a difference, the extra price should be well worth it.

sweet! so you bought a 10 meter roll. How much do you need to cable front and rear, roughly, given you run full housing the whole length? (ie no cable stops on the frame)

very similar to a bmx brake cable

I wonder if using compressionless housing could help to make the brake levers feel lighter on my 2008 Surly Long Haul Trucker w/ stock cantilever setup (Tektro Oryx cantilever #992)?

Did you run the same kind of housing full-length? I am asking, because I try to figure out why in Road Pro Kit Jagwire put a segment of compressible housing next to compressionless. Since it is pre-built you end up with partially compressionless housing and the performance is rather poor.

Have you ever used "triflow" in cable housing?

I actually just got this same housing for my poseidon X, what did you use to cut and crimp this stuff?

Maybe but Klampers won’t make any difference?

Which brakes pads do you use?

Lol good to know that I put my shifting cable on the wrong side of the frame

You’re showing your endo and fakie kungfu….

I dont get gravel bikes, whats the point. use a xc for light trail riding or gravel and its good enough for those super rare road riding. if I want fast road performance then I choose road and fast mtb I choose any of the thousands of designs for mtbs out there. gravel just seems like nonsense and especially with drop bars, for me the whole ride feels like im about to crash when making a turn on a trail. offroad should always be flat bar, its better scientifically and anecdotally.

Good cables 🤌🤌🤌 such a massive and amazing upgrade.