As a new IT student who has no idea about computers and has to take apart and rebuild a pc 5 days into starting school this video absolutely helped me! This is the first time I have ever felt the need to comment on a video on youtube so that should tell you how much this video helped me!!

the wires make everything look confusing for me but when you disconnected everything, the hardware become so much nicer to look at and easier to understand

Thank you very much for showing the whole process in detail, because I am in a course on installation and network management, and I had never noticed the details.

This is 2020 and am 15 I will be this when I grow up wish me luck

This is by far the best Computer Hardware explanation video i have watched.Great Job there...Its so easy to understand

3:09 / 28:00 Power supply 3:55 / 28:00 Hard drive 5:08 / 28:00 CD drive 5:35 / 28:00 RAM Random Access Memory 6:30 / 28:00 PCI expansion card 10:02 / 28:00 CPU 13:28 / 28:00 Chipset

HELLO CTE! Am an avid Subscriber, you are my first 'Go to' when diagnosing PC issues! I recently built a new Computer in my old Tower with a new Raidmax Vampire 1000W 80 Plus Gold Power Supply, an MSI Z390-A PRO Motherboard with an Intel Pentium Gold Processor G5400 CPU @ 3.7GHz! Next added 64.0 GB DDR4 3200 Ram! Also a ZOTAC GAMING GeForce GTX 1 Video Card! Recently upgraded all my HHD's with an Intel 660p Series M.2 1 TB SSD Drive C and two WD I TB internal SSD's! My Computer now boots up completely for a cold start in 30 seconds!!!! (Once in a while when I turn it on, it Boots into the Bios Screen)!!!(But when I wont to boot into Bios, no matter what key combination I press it wont go into Bios on Command)! Windows will not display on my Digital Monitor but I can see the Bios Screen on another HDMI Output to my 32 inch TV! Am running XMP Mode and Gaming Mode on the MSI along with allocating 3/4 of my Ram to Process my Adobe Premiere 2022! My Question is: How do I get the computer to Boot into Windows EVERY TIME? And secondly, How do I get my computer to boot into Bios on command?

the most beneficial and perfect hardware video ever

This is one of the best video I've watched for basics of computers

Dude... seriously Thank You... I hope that me telling you that you saved me makes you feel good. I owe you one.

Great job, awesome, clear and clean, easy explanation. thank you . Any new videos? Anwar from Yemen

I am studying for my ComptiaTech A+ certification, and this is a clear, great and helpful video. However, the way the CPU was taken out with the heatsink from the CPU socket did not feel right to me.

Super and Simple Coaching by Experienced Persons

Simplifies learners understanding of basic computer system components

takes me back to my A+ days.

thankyou sir for helping us it is amuch great to listen to your videos and it is interactive that you show each components that you assemble and deassamble

Thanks, and great job! I am currently studying for my CompTIA A+ Certification (trying to break into the IT world) and this really helps!!!

Hey....Thank you for this video we saw it in IT class and then had to do it ourselves if it was not for this video I would have for sure failed my class. Thanxs again.😉

I did all this in electronics... And it was fun 🌹

Talented teacher. Well done, and thanks from the million plus who saw the video!!

I feel the same way Carolyn, I'm taking a computer hardware class right now and this is the best explanation I've seen. Thank you for explaining it all slowly

buddy you did a traffic job i been looking for a video like this you take care have a great day thank you for the video amazing how you explained everything ty again buddy

I'm studying computers for the first time and this video really clears up my confusion of where and how the various parts go. Thank you so much for this!

Awesome Job done here. Explained from the scratch and helpful for beginners. Hatsoff to CTE Skills group

Very good explanation. I have learned something about computer assembly. When there is a problem, I can solve it. However, I still need to know more about connecting all cables. I liked your video a lot. I found it very practical and professional. Great work. A big hug, and success. Thanks a lot.

Thank you very much for getting right to the point and explaining everything precisely and accurately. Especially with the components and the step by step instructions on how dismantle and put back together the computer.Your videos are the best.

We are having a session of de assembling and reassembling today.. This is really the exact content whta I need. Thank you so much😁

As for the sata cables and the main power cable leading to the motherboard that you removed at first. I located both of these on my computer and while holding down the tab, attempted to pull them out. I could not. The sata cable end plugged into the motherboard would not come out, i even went as far as to use plyers and even with plyers i could not remove it.

If the CPU stucks to the cooler, just wiggle it a littlebit or even try to heat it up. Don't force it or the CPU pins can break.

I have been looking so long for s video like this, thank you sir for posting it!

Thank You very much, Sir. Video shows clearly how to install the machine's hardware and where the connections are located on the M/B. Every application is slightly different, however the basic knowledge for this process is definitely shared and is a great foundation for a rig diy-er or tech enthusiast.

Thanks man now I finally learned how to disassemble my computer hardware and place them back again !

Best tutorial ! helped a lot.

This was an AWESOME!! Video. I am new to the tech world and your step-by-step instruction with explanation was Awesome!! I'm taking a computer class and stuck on the motherboard. It looks intimidating but now i have confidence. Thank you for sharing your knowledge. Oh I did not see the anti wrist static to prevent electric surge?? I'm a beginner

CTE Thank you for your time and effort. inform me the new lessons. God Bless you.

your cooperation makes us confident

very very nice video you make it so easy for newcomers to understand what a PC is

wow bro u know every thing I m a student of class 5 and my sir has told to watch this video so I watched its amazing

Very nice video, very helpful video Awesome explanation. Very much informative video All should watch. Dear Sir, thank you very much. The video was really helpful. Very nice video. All should watch.

Thank you for keeping your explanation basic for a beginner.

Great Video Sir, you explained very clearly, basic learners also got confident about computer.

Thanks for the presentation, it's very thoroughly done. The visual aid isn't bad at all.

Your explanations and instructions were on point. Great video.

Very good briefing and accurate video

The tutors are doing good job keep up

Ok just a guess but is that a pc that wont be used anymore ...because i see no protection...did you touch the power supply...or have wrist straps for Esd...

i hate to study dad

this video is great indeed

This is wonderful, great stuff and educating material

Thank you very much ....and continue helping IT student sir....salute you

quick question just to make sure, it's alright to lift up the motherboard by the heat sink?

Very nice video of basic computer

very clearly explained every part. great job. its very very educative video.

very nice and also appreciatable video !

Great!! Please may do this on a laptop computers too. Sound tone was not so clear to me, may u need to backup with a write up. Thanks hoping to see u reply soon.

Thank you for helpful information

thanks a lot sir, now i know how to repair and assemble my cpu..thank you and god bless you..

Thanks for all the detail. Love the video.

Great lecture.

it was awesome brother thanks...can anyone tell me what i should study for information technology at a very basic level

Thank you... So cleaning u shown the hardware of computer.. So usefull

Saudações; O meu computador não liga e o técnico disse que o mosfet está danificado, ele já desinstalou do pc e eu perdi o mosfet. Porém precisamos voltar a instalar mas não sei qual é o tipo é modelo do mosfet a usar. A marca é hp dv6 lx6 Alguém pode me dizer que most usar ?

Great job this shows me a lot so thank you CTE Skills.com

my computer's motherboard and HDD was broken last day. it was a 3 yr old one. Which will be profitable(lasting with performance) , repairing the current system or buying new CPU? suggestions are appreciated.✌️

AIU college sent me here andd i love this video, i want to build a high end gaming desktop and this will give me the knowledge i need. got a video for liquid cooling??

Good day sir! We would like to ask if we can feature some of your videos for our thesis. It would be a great help because it consists of reliable information/troubleshooting tutorials. We will not forget to give credits for your helpful videos so readers can take a look on your link and videos. Thank you sir and we are hoping for your favorable response.

I have seen this video and it is very important to me. I have got clear information about Desktop hard ware. Thank you very much ! if Any new videos please ?

Ty ty so much ...it helps lot in practical knowledge

This tutorial is great. Well explained

tnks we get a lot of knowlege from video

Great video! thanks

Thanks for the teaching. I've learned much.

Good fucking video, man! Straight forward, no bullshit. Too many videos like that now a days!

I have an ancient rig from 2004 that I want to discover. Until I bought a laptop in 2011, I never felt the need to disassemble or even open up the case. I had to disassemble the whole motherboard just to upgrade the RAM with an HP Pavilion laptop, which I'm glad nothing got broken xD so I got more interested in hardware since then. Also I want to build my own rig and I know I'll be enjoying it. So just researching the desktop side. I have a question; After I take off the CPU would I need to add thermal paste or I can just put it back as It's?

thanks for the video, good one for me to take basic idea

Can we embed your video in our sites with credits?

Thank you so so much !! It was very helpful, Please work on more such videos .. :)

Great nice video. Thank you

A little boring but very informative and easy to understand. Thanks!

Thank you for sharing basics :)

EXCELLENT!!!! It's Really Useful To Me

Thanks alot ! We're gonna have our computer exam about this today >.< . This video is very helpful .

This is absolutely magnufuique!

I'm newly learning computers for CompTIA A+ to try to break into the IT field. This video is quite helpful to see how to take apart a computer and put it back together and what the different parts are! I know he said he'd mention it more in another video, but i just want to see if maybe I'm thinking of this the correct way. He put one single stick of RAM on the motherboard, does that mean it's likely just has 2GB of RAM installed, but could have 4GB if he had another stick to put in the second slot? Also, would that AMD CPU he pointed out be considered LGA (land grid array)? That's not PGA (pin grid array), right? And one last question, would you use the antistatic bag and/or an electrostatic discharge bracelet throughout the whole time that you're assembling and disassembling the computer or just when you're specifically handling the motherboard?

Great video Sir. I subscribed instantly.

Can you share what kind of Thermal Glue you used?

Flawless job, thank you so much for uploading.

Wow, i this video is the best and most eazyies to understand the how take apart and fix a computer. PLUS ONE LIKE and tweet out but i don't have a lot of followers but its worth it. your good at explaining.

Thank you for your video it is really good. I learned a lot. Take care!

Hi i am not able to format my hard drive it is a 500 Gb segate from the boot menu or from cmd or disk management...

May I link to this video as an extra source? I made a very basic version for my students and would like to offer something if they're looking for more information, and this video was fantastic!

really nice video great job man

Nice video. I have a blog related to computer hardware and networking. Can you permit me to embed your video on my blog. Please reply

thank u so much... sir so cleanly u have explained

very educational great job !

Me watching this video an hour before my exam

were you working on your motherboard while on foil?

thank you for making this helpful video because it gives me more knowledge about computer hardware servicing...

This Video is so informative, dude thanks

Thanks a lot I have got a lote brief steps and parts.