Customer Complaints: Jdm Motor Swap PT2

No video

Customer Complaints: Jdm Motor Swap PT2

Рет қаралды 204,747

Күн бұрын

This is part of us fixing a customers G35 that had gotten a "new" motor installed that happened to be from japan. We were able to get it up and running.

Пікірлер: 123

@keonhowell2856 7 ай бұрын

U can tell they take their job seriously and enjoy what they do. It's cool to have a team willing to learn how to get the car running, and the leader not only shows how it's done but also works with them, giving them advice along the way . Well done. This is my dream as well. I hope one day I can achieve a job like this . Unfortunately, I had to learn some things on my own, but nothing sounds better than a nice car that starts up .

@fastinradfordable 6 ай бұрын

I’m that guy for some of the young ones. One of the kids I got started owned his own shop employing his dad and brothers. I take it very seriously.

@comkver 8 ай бұрын

Someone in the last video mentioned the possibility of that the clutch wasn't aligned correctly.

@ituaki 8 ай бұрын

@STAYTUNED69yea on VQs the crank sensor has a reluctor on the flywheel which if not aligned with a hole it’ll cause a bad misfire (quoting what they commented)

@carwerks101 7 ай бұрын

I think he means flywheel, but even if the dowel was missing and the flywheel was installed incorrectly, it still would have gotten spark, so the “fix” for this is a bit confusing

@j.gtheautotech8455 7 ай бұрын

@@carwerks101not necessarily, every car is different. It’s like as if the crank sensor is broken. It will cause a no start with no spark at all, or fuel depending on the vehicle. If it was out a few teeth then yes spark may have been erratic

@DEATHWISHVQ 7 ай бұрын

I think this video explains how and why a g35 won’t start due to a clutch engagement, I think this also happened to my friend kzfaq.info/get/bejne/n9amqNN13ZbNYWg.htmlsi=k4Om4wQrjMu-zKpK

@marcomontano9454 6 ай бұрын

Very interesting

@TacticalTunic4 8 ай бұрын

I knew it lol I said it in the last video .. the fly wheel was off timing

@Sarcof227 8 ай бұрын

Was just about to come find your name to @ you about it. Good shit

@jram2296 8 ай бұрын

Officially Goated lol

@ConceptIIIPerformance 8 ай бұрын

You were correct #goat

@vaylintwilight 7 ай бұрын

Not even a mechanic just love cars and love learning. Love your vids. Like getting to hang out at the shop. ❤

@NightmarexXx831 8 ай бұрын

Great work guys, keep up the good vibes and always enjoy the content. Learn something new everyday.

@naviitoo 7 ай бұрын

Bro I always laugh the small SFX 😂 when the bolt drop and hit his chest. Reminded me of the old hit markers for COD 😂🎉 2:48

@Maksothebagchaser 8 ай бұрын

Need more of these vids! Fav thing to watch high af 🔥💯

@danh6341 5 ай бұрын

Thank you! I am planning a Rev Up to Non-rev up swap with a JDM engine here in a few weeks. (ECU update to run it is in the works.) Then engine has been out for some time while I figured things out. I am very handy but feel like a novice at most things. You likely saved me from a hang up or two! The steps you took in figuring out the issue were very helpful, also!

@flyingbutts50 7 ай бұрын

If you put an after market lightweight flywheel such as a chromyl lightweight one from Action Clutch, you gotta put a small copper washer inbetween the crank sensor and the bell housing. The fly wheel is just the smallest bit wider than a stock which makes the teeth too close to the crank sensor. I had he same problem on my G35 but found out quick enough.

@paulsoileau1850 7 ай бұрын

Love the Pokémon 3rd gen music playing. Made my day

@captaint4587 6 ай бұрын

That’s from Pokemon Emerald correct? That brought back amazing memories back 4-5th grade

@tomr1107 6 ай бұрын

Cant wait for the summer to take my built twin turbo out to the track again. This video got me itching to mod it some more.

@brandonlapointe5939 5 ай бұрын

The CoD hit markers every once in a while just send me lol

@countpuchi Ай бұрын

I learned alot by watching these guys.

@iMintyNinja 8 ай бұрын

I really believe Auto Mechanics are basically Mechanical+Electrical Engineers and should be treated as such.

@michaelharland9599 7 ай бұрын

engineers design things and these guys fix them and take them apart/put them back together very rarely will you see an enginner doing the physical labor

@fastinradfordable 6 ай бұрын

Because if they let mechanics build cars Nothing would be breakable

@dustinainsley8792 3 ай бұрын

Amen. That is why in not working in the industry. No desire to.

@DarkSkillchain 8 ай бұрын

Man this car has so many issues lol gezz the owner did the work him self smh 🤦🏽‍♂️ going see a part 10 lmao soon on this thing

@caratxd 8 ай бұрын

y'all listening to some good music ngl

@HandGunPat 8 ай бұрын

Damn man, it's only like I commented it! No shoutout! haha all good, glad you got it fixed.

@yuno3364 8 ай бұрын

Just did a kswap and had the crank sensor trigger wheel on backwards, I feel their pain lol

@user-wd3dz7bf2x 7 ай бұрын

Holy fuck yall are geniuses I never would have thought about the cults not being aligned. Wicked problem solving

@PewZapDie 7 ай бұрын

Out of interest how much would this repair cost?

@guillainaubert5764 8 ай бұрын

Nice work ! I love to see yours videos ! If I may say, I think the sound of the voices are a bit unbalanced with others sound like wrench or the radio in background. I'm french and I need to ear the voice clearly so when harmer hit, i'm closer to become deaf ^^Anyway perfect job and knowledge ty !

@Shuten_Wukong 8 ай бұрын

Good ole WorldPac. Brings back memories.

@georgediaz8118 6 ай бұрын

need mechanics like this in nj , great video

@bobswrld8212 8 ай бұрын

Love the videos. Keep it up

@giantpandagraphics9568 8 ай бұрын

I really enjoy the video! Keep up the good work.

@ConceptIIIPerformance 8 ай бұрын

Thank you!

@seahad4744 5 ай бұрын

yooo the hit marker sound from cod lool. shout out to the editor

@michaelalvarez3701 8 ай бұрын

Also totally unrelated but 13:12 R+L Truck in the background, I work for them lol

@nazc0 5 ай бұрын

Easy way to test for this problem is to unplug the crank sensor and fire up the car. If it idles fine, its a misaligned flywheel

@Kingcustomz 7 ай бұрын

I love the Pokémon background music😊

@priyampatel 7 ай бұрын

Here just for the old Pokémon background music 😂

@esrtradajesse 7 ай бұрын

The Pokemon music is everything

@crazyjatt24 8 ай бұрын

WE NEED MORE LONGER VIDSSS

@user-ny7hb3sv4w 7 ай бұрын

This engines vq you have to run oem crank position sensor and cam shaft both banks

@woo10gamingtv11 7 ай бұрын

oScAr ...YES SIR?!?!?😂😂

@kennyman338 8 ай бұрын

Graffiti on the back wall? 😮 If the alternator is bad is it not supplying it with not enough voltage to cause a misfire.

@flako7499 7 ай бұрын

bro got charged an arm and a leg. Love the videos tho !!!

@Angelsmokes2023 8 ай бұрын

Gotta love the Pokemon music

@wkjeeping9053 6 ай бұрын

I do mechanic work on my own vehicles but I won't do shotty work just to get it running. Here's example: I have led headlights with a chip on each thin side and 1 chip was out of 2 I replaced cuz I can't stand to see shotty work.

@woo10gamingtv11 7 ай бұрын

When his ratchetwrench bent i screamed😂😂😂

@guyeazzy 7 ай бұрын

Could have just unplugged the crank sensor and if it starts then the fly wheel was on wrong

@ManchaTwoFr 7 ай бұрын

Is this a mechanic tip? Or just specifically for this car?

@tomr1107 6 ай бұрын

@@ManchaTwoFr specific for the VQ35DE.

@ABeans07 8 ай бұрын

Ready for the next take over.

@charger6773 8 ай бұрын

Probably still got air in the cooling system pain to bleed these vqs

@mikeyoungling6197 7 ай бұрын

Easy to bleed cooling system from air bubbles. Use an over fill funnel like they did with the yellow one. Turn the car on after filling and have it overfill. Air bubbles will work themselves out that way, also can squeeze the hose to help. Simple😊

@naviitoo 7 ай бұрын

BIG DUBZZ 🎉🎉🎉 9:03

@GUTSO10 4 ай бұрын

Big dubs in the trap 🪤

@drdiabeetus3061 7 ай бұрын

Great cars, sadly so few left in good shape. These aren’t hard or expensive to maintain either. Unfortunately they get abused, neglected, and hand around like a corner girl.

@davidgriggs3967 5 ай бұрын

The flat battery would have been the misfire issue due to the low voltage to the ecu .

@Mike-vn8sn 8 ай бұрын

OOOOOOOO!!!!! A part 2?! :D

@MarkMyWordsXx 6 ай бұрын

I see that it's standard practice to use the cardboard to keep the trans bolts in order. My question is, if their is any difference in the bolts at this time to make them not a not standard spec, weather it be stretching or whatever, shouldn't they be considered "damaged" and then replaced? I never understood this. If they're gold bolts they should fit the same Into any spot

@nDiggity 6 ай бұрын

damn good work guys

@Niko-ui9xi 8 ай бұрын

@Handgunpat said it in the last video he was correct!!

@GBKICKS1 8 ай бұрын

love these cars

@fastinradfordable 6 ай бұрын

Get these boys some headlamps!!!3

@FitForSin 7 ай бұрын

We all only watch this for Will

@colbymesservy7618 8 ай бұрын

Bro i did one on an nissan pathfinder and found out the hard way that this happens. Very common on dual mass flywheels

@aaronjimenez9529 8 ай бұрын

What Sz wheels are the Ferrara wheels on that stinger ?

@franciscogarcia4591 6 ай бұрын

😅😅😅😅😅este canal esta bien cura y luego nadie se intimida en decir la verdad😂😂😂😂😂

@jtjimenez05 6 ай бұрын

I wanna bring my car here someday

@themreric1 8 ай бұрын

nice. good job guys

@rpgbossatron591 4 ай бұрын

Big dubs

@Atrocities85 3 ай бұрын

Silicone the shifter boot 😅😅

@mezar4854 4 ай бұрын

9:40 NO MAMES GHUEY!!

@vcmdpropulsion126 8 ай бұрын

still missing?

@Jwop5799 4 ай бұрын

Bro my g is doing the same shit, I replaced my auto trans with a used one and it gave me a crank sensor code. I replaced it along with the cams and it still gives me the code

@resonantshadow 6 ай бұрын

The fkn pokemon music 😂

@cam.evo8661 7 ай бұрын

am i hearing Pokémon sapphire\emerald music in the back ground?!?

@crash1915 7 ай бұрын

No fucking way… my dumbass would have the fuse block out checking pins all damn day, and for nothing.

@colenorthwick5023 7 ай бұрын

What city is thus busniess located

@michaelalvarez3701 8 ай бұрын

Who's 4Runner is that? D:

@luisornelas5020 5 ай бұрын

Bro I’ve been trying to look for the proper spelling for douma I need help also what does it mean thanks in advance

@lawrencedarrall815 4 ай бұрын

Pretty sure it’s spelt doma and means dirt place. Could be wrong though

@nicholasaverette4061 7 ай бұрын

Bro, yall Wana work on my s6?

@speedymike7845 7 ай бұрын

So what was the problem can somebody tell me please??????

@tomr1107 6 ай бұрын

flywheel was installed incorrectly making the crank position sensor not know where in the rotation the motor is and throwing off spark firing order.

@ezratorrey5227 8 ай бұрын

so it wouldnt run bc the flywheel was installed incorrectly?

@ConceptIIIPerformance 8 ай бұрын

That is correct

@spannaproductions 7 ай бұрын

Could that happen in an automatic car?

@tougeu13 7 ай бұрын

yes...both fly wheels have those teeth on them@@spannaproductions

@tomr1107 6 ай бұрын

@@spannaproductions most likely. remember tho, autos dont have flywheels, they have flex plates.

@IHadToMakeThisAccount 5 ай бұрын

Id assume yall have to charge for all those hours diagnosed right? I hate working on things that other people have already tampered with because you always assume they did things correctly (because they said so) so you spend forever looking for problems unrelated to what they could’ve done, only for for you to have to redo stuff they already messed with

@cucumberandgreentea 8 ай бұрын

💸

@danieldt9439 5 ай бұрын

du maaa

@1slowbenz 8 ай бұрын

Sup

@hendo5805 8 ай бұрын

Sup

@xenorica7457 8 ай бұрын

Sup

@Krakenlance 8 ай бұрын

sup

@4rvnky 8 ай бұрын

sup

@JoseRamirez-hv4hi 8 ай бұрын

Sup

@DanielTorres-bs8dx 7 ай бұрын

Using regular water in the radiator? Remind me to never go to this shop.

@johnthecarguy 7 ай бұрын

... you missed the whole part where they put the unmixed coolant in. How convenient

@tomr1107 6 ай бұрын

@@johnthecarguy only distilled water should be used when mixing concentrate coolant. Im sure spring water is fine, but tap water or hose water has alot of minerals in it that can deposit in the cooling system.