ICS® 695XL vs Cut-n-Break - Floor cut
Рет қаралды 21,473
6 жыл бұрынThe ICS, 695XL gas power cutter goes head to head against the cut-n-break - making a cut in a concrete floor. Both cut a horizontal opening in a concrete floor that is 14" x 9" and 12" thick. See the benefits of using the ICS tool to make this cut.
@johnsheppard9827 3 жыл бұрын
Hello, I have a cut n break and have already cut a few meters. To get the middle bridge out I use a caulking hammer, I cut the hole in 35 minutes there. Two Cut n Break blades costs about 200 euro, a chain costs about 600 euro. Both have its pros and cons, the chain saw I would use only for small details and the cut n break for bigger. Cheers
@legrandsacmagic 3 жыл бұрын
No rebar! I've used both on 32mm reinforced concrete. Ics bars and chains are terrible!
@Appytail Жыл бұрын
I can only recommend to use MUCH MUCH MUCH MUCH more water than what's shown here for the ICS. Terrible chain and bar life. But sometimes, it's the only tool that will do ... The guy who does the Cut & Break, is clearly not the fastest on earth ...
Алмаза Рез СК.
Рет қаралды 1,4 М.
ICS® Diamond Tools and Equipment
Рет қаралды 25 М.
Алмаза Рез СК.
Рет қаралды 8 М.
Special Effects Funny 44
Рет қаралды 1,3 МЛН
Immersed
Рет қаралды 3,9 МЛН