No video
Configuring the Advanced Combat Helmet with a PVS-7 or a PVS-14 Night Vision Device
Рет қаралды 79,257
Күн бұрын
@_ZeRAuJ 5 жыл бұрын
Preicate the tutorial. I was attempting to place the screw from the outside in 😂. It kept moving around up until I saw how you placed it from the inside and the little washer portion from the bracket mount itself. Even my supervisors didn't know how to properly place these things. Thank You ! ☺️
@ericscottstevens 3 жыл бұрын
Just bought one of these ACH helmets for an absurdly cheap price. Now piecing together the components for the NVS bracket, got the goggles on the way. This will go on my display with my own worn Gulf War PASGT with DBDU cover.
@spwan10 3 жыл бұрын
I'm also putting one together but can't seem to figure out which bracket system is best, there are 3 different systems: The Norotos universal NVG Shroud, ACH NVG mount, and Norotos NVG Mounting Bracket. Any suggestion on which I should go with?
@ericscottstevens 3 жыл бұрын
@@spwan10 Your setup probably depends on the end means, historical or personal aesthetic. Mine is historical as the helmet is from a National Guard INF REG that went to Afgan in 2012 that came with a traditional NV Goggle Helmet For ACH MICH Helmet NVG PVS-7/14 baseplate bracket. Depending on your price point the dovetails are popular choice but the whole kit may be about approx. $260 (Wilcox or Norotos). Norotos Rhino 2 with a Norotos PVS 15/18 Dovetail socket is viewed as a strong setup.
@krusekids 2 жыл бұрын
I feel so stupid. I've always struggled to fit the screw for the NVG mount through the tiny slit on the front of the helmet cover. I normally end up cutting a bigger hole into the cover. I never thought to go from the inside out. Makes much more sense.
@mohammedalani5410 3 жыл бұрын
Thanks for the video.
@emilianodiaz2399 7 жыл бұрын
thanks for the lesson! P.S: Where would one buy ballistic screws for the NVG mount?
@bill9693 4 жыл бұрын
Hey yes man
@worldwarstuff2906 2 жыл бұрын
does this also work for a mich like a mich 2000 and where can i gt this cover of the helmet
@Orca19904 2 жыл бұрын
Is the black mounting bracket still authorized with the new OCP helmet cover, or is the beige one the only authorized color now?
@jpbouttabag 3 жыл бұрын
My ach doesn't have the hole in the front
@roostamasta299 3 жыл бұрын
That way happen
@roostamasta299 3 жыл бұрын
Center the bracket in the middle of the helmet
@roostamasta299 3 жыл бұрын
And mark where you need to use a drill to go through it
@worldwarstuff2906 2 жыл бұрын
does this with a mich 2000
@Orca19904 9 ай бұрын
MICH and ACH are the same, just different names.
@zanderplant3575 5 жыл бұрын
Does this work for PVS-15?
@salttactical8683 5 жыл бұрын
should
PEO Soldier
Рет қаралды 6 М.
Family Games Media
Рет қаралды 32 МЛН
Angry Asian Fabrication
Рет қаралды 14 М.