Nice video. I use this exact setup for years with out issues, first with crome then with HTS. Solid package. I see some here are saying they have issue with the hulog well that is bad solder connection on ecu or backwards on plug or lastly drivers on computer. Always cut the j12 resistor and your good. I think its sad these are end of life. I have had mine for 13 years same battery in the emu!
@CJBuilt Жыл бұрын
Yeah man it’s a solid setup Thanks for the tips man I’ll pin it so people can refer if they have issues 🙌🏽
@BoostedNW Жыл бұрын
Hey since moates is gone, and no one can get ostrich, demon, hulog.. and only can get(if your lucky) other expensive emulators. I have been thinking it would be good to highlight that there are still budget options out there for tuning B/D/F/H. We have replacements for ostrich, hulog, burn2, etc that can get people tuning on a budget.. Yes they are a little more work but its good to learn, since 99% of people have no use for an emulator as they don't even know how to tune, or even touch it after its tuned so then its just an expensive unused piece of hardware when a chip could take that same place. Reach out if you would be interested in doing a video that could highlight this process and what we offer.. We are trying to help keep the budget/chip tuning for OBD1 alive like moates did for many years!
@CJBuilt Жыл бұрын
Will reach out on Instagram!
@theimporttuner3992 жыл бұрын
The moates ostrich 2.0 got discontinued recently(all bad), your probably one of the last ones to purchase a unit. Luckily i found one locally on fb marketplace. Ill be hitting u up with questions soon my boy. Keep up them solid videos!!
@CJBuilt2 жыл бұрын
No way?? Wow I had just looked not too long ago and they weren’t discontinued yet. Probably going to see a lot of Cobra or Snakemu now. Yeah man if you need anything lmk! Instagram is better bc KZfaq is trash with notifications 😂
@BoostedNW Жыл бұрын
Moates is gone but we have replacements!
@deeeezel2 ай бұрын
Legend says hes still driving around with his high beams on ☠️
@CJBuilt2 ай бұрын
LMAOO my headlight was out and the cops on my area are ruthless XD
@MixaL1s68047 ай бұрын
sorry if its noob question... since ur on a y8, couldnt you choose to go with a p2p (y8) basemap on the p28? why did you choose the z6 basemap?
@CJBuilt7 ай бұрын
There are no y8 basemaps in OBD1 unfortunately. All the Y8 ones you’ll find are usually recreated not ripped due to the p2p being an OBD2 ecu
@MixaL1s68047 ай бұрын
understandable... are these y8-wannabe basemaps any good? if i use the z6 basemap and take 4-5 degrees out, across the whole range, will that be closer to the y8 map? or are there more things that make the y8 map different? appart from knock sensor and 2nd o2 sensor of course. @@CJBuilt
@Saberus2 жыл бұрын
Im having issues connecting the Hulog. Ostrich works fine but the hulog will not connect no matter what i try. When i try to connect it times out right after and cannot connect to ecu. Any know issue to why? Sometimes when it tries to connect gives me “j12/4 not disconnected”. I’ve already cut j12 and still no luck. Updated drivers and everything as well
@CJBuilt2 жыл бұрын
The only thing I can think is it’s not reading the right port for the Hulog In the settings I had to mess with it a bit to find the correct port it was connected to. I suggest taking it off auto detect and changing it to another com port to see if it picks it up.
@rousseladrien662 Жыл бұрын
Same
@rousseladrien662 Жыл бұрын
Wich speed?
@benjaminalejandrosalinasyo4195 Жыл бұрын
Hola, donde puedo comprar ?
@CJBuilt Жыл бұрын
Ahora no puedes comprarlo nuevo. Estan interrumpido. Necesitas comprarlo usado por ahora :/
@domhe_7 ай бұрын
can i tune only using a data logger or do i need the ostrich too? or ig the emulator
@CJBuilt7 ай бұрын
You will need the emulator to Live tune. If you want to tune with only the datalogger, you would need to make changes to the tune, burn the chip, but it in the ecu and datalog the changes. To me, not at all efficient. I highly recommend the emulator.
@dotd0tx2 жыл бұрын
Question. On the hulog mine connect then disconnects instantly any ideas?
@CJBuilt2 жыл бұрын
Have you tried changing the ports? That was happening to me at first and I had to change the ports on the settings a bit until it started working.
@rousseladrien662 Жыл бұрын
Hi thanks it s normal if p28 start without eprom? And for me hs work with oestrich but not hulog And hulog witk with ectune 1.3 (from rtp cobra) but not oestrich... do you have last driver somewhere?
@CJBuilt Жыл бұрын
I’m a little confused on your questions. Message me on Instagram or email and we’ll review! @cj.built Cody.cjbuilt@gmail.com
@rousseladrien662 Жыл бұрын
@@CJBuilt i have not insta and your mail
@ismaelcruzvalencia8988 Жыл бұрын
What burner and everything you get for tune brand pls
@CJBuilt Жыл бұрын
Hey what’s up! I am using Moates ostrich for the emulator and the Hulog data logger. A few of those items are discontinued now but there is a guy remaking them @BoostedNW
@ismaelcruzvalencia8988 Жыл бұрын
Ok cool tanks for the info and nice video great work
@CJBuilt Жыл бұрын
Absolutely!! Thanks for the support!
@saulflores7902 Жыл бұрын
Where you got the emulator and the datalogger ?
@CJBuilt Жыл бұрын
I got it from the Moates website but they recently went discontinued. There is a guy making his own version soon. @boostednw
@FIERROPIPEX2 жыл бұрын
Hey bro where do you buy de moates
@CJBuilt2 жыл бұрын
I got it from their website a month or so before they discontinued :/
@eyeswideopen20642 жыл бұрын
Where did u buy this and how much was it
@CJBuilt2 жыл бұрын
I got it off HAMotorsports.com Hulog was $35 Ostrich was $175
@andrewdero62712 жыл бұрын
@@CJBuilt was thinking ordering and doing my own tune.. running a street tune right now on my p06 on my b20b swap ek..did u pay for the crome tuner apps too?
@CJBuilt2 жыл бұрын
@@andrewdero6271 Awesome man that sounds like a fun car! I am using Honda Tuning Suite. It is a free open source software for D, B, H & F series. Other Honda motors you would need to get a license.
@andrewdero62712 жыл бұрын
@@CJBuilt imma try that when i get a hand of the moates products
@CJBuilt2 жыл бұрын
@@andrewdero6271 Definitely recommend trying! Going to in the future compare to Hondata to see if Hondata is worth it(from what I have heard it is)