If I was going to pay over £100 for a qualified sparky to install my cooker I wouldn't be on here watching Vids of how to do it myself 😂

Your video has helped me fixed for someone. Most important thing here is i got my daily bread from your video. God richerly bless you with more 🙏.

how nice to hear such a clear voice on KZfaq; very helpful.

Thanks so much! no more begging of my lazy man! done it all bymyself :) !

Brilliant. Just what I needed. Very clear step by step instruction.

Thank you very much, just did exactly what you put on here and my cooker is on.

I just needed to know how to take the black box and open it was a mystery until I went underneath 😂 thanks for the video

Absolutely brilliant video. Simple clear instructions. Well done 👍🏾

Thank you for making this video, saved me quite a bit of money:)

thanks mate you saved me £80

I followed your video steps yesterday (12/7/2018) and I have lift off. Thank you very much :)

Exactly what i was looking for too. Very helpful, clear instructions...Thank you.

Watch your video got a new cooker did not how to wire it up had it working in a hour so thanks. From Scotland

Some recent Hotpoint cookers, at least, have terminals that need either an 8mm spanner or a 4mm Allen key, rather than the crosshead screws shown.

Big help I managed to hook the cooker up with help from this video. 😁

cheers mate!! cooker wired up successfully! !

Quick question: as there are multiple live and neutral screws, does it matter which ones you use if they are all connected by those little bridges?

Thanks for the upload . Subbed!!

called out an electrician but it cost £180. A few days later it wasn’t working so called them back but had only forgot to switch the switch on the wall . Damn ! They billed £150 just for coming out and flicking a wall switch. Total cost £330 .

If my electric cable earth isn’t covered with the yellow and green cable cover, but is in between the blue and brown and all coved with the grey wires cover ,can you still use it?

Than you. you saved me $180 and time as well. I took me just 10 minutes to get it fixed.

Exactly what I was looking for, thank you!

Thank you, saved my pizza ☺

Heyy man thanks a lot this video really helped thanks man

AO want £90 to do this job, and it's £90 I just don't have, so this video is ideal thanks 👍

This is so informative and helpful. Thank you. I think I may be able to do this now.

thanks m8 you just saved me £55.00

What if earth isn't coated can still use it?? Got wire from sparky on site

Thanks ❤

I’ve just purchased bush betaw50b cooker and I haven’t got a clue what I’m Looking at but doesn’t seem to have come with a wire to connect cooker to the wall. Where can I purchase one from and what will I need?

just bought an aeg induction double oven and wiring connectors at back have 220 and 240v. What puzzles me is that the 240v connectors have been blanked but surely connection should be made to the 240v

Thanks so much, very clear instructions.😀

This is excellent and very easy to follow. Thank you.

just bought an electrolux induction cooker and the connectors at the back are different from this one! there are 6 screws, with 3 of them being blanked off with white plastic things! so, do the wires go on to the open ones or the blanked off ones?

Beautifully done 😊

I bought a new cooker the wires on older one are black. Red. Green and yellow are these old wires there a ppain to get in to the new terminals should i get new ones

Hi i just one to ask you please I have hotpoint cooker per aprire over heated and melted it is it possible to put deferent brand on it please

What do we call the U shape copper inside please, the one on the video... thank you

Thanks - better than spending £80 to get Currys / AO to install.....

You must fit cable spade connectors to the ends of your cable for a secure connection to the terminals otherwise those wires will work loose when moving the cooker into position and can cause a fire / electrocution risk......!!!!!!

mine only has two copper connectors, both sides at the top 2 screws

what if i have a white wire red green and blue where does white go

Thank you, but for me I stragglers to connect inside

Top man. Thank you. 👍👍

Ive just bought a BUSH BESAW50B and im finding it extremely difficult to install. Ive tried and 2 other people have tried. we just can't get the wires in the tiny holes! stressed

My mums just had a new beko electric cooker delivered today, i wired it up with same wire as old cooker but it keeps tripping the main switch board on wall... its same make as old cooker but smaller... any help would be appreciated

محتاج الروزيتا ديه من اين اجيبها

If the nail underneath is not okay with me, I think it is lost, what should I do? Many thanks

thank you . itis very useful.

Do you use a twin and earth cable?

Thanks you sir🙏🙏🙏

Thank you for help 🤕

does the thickness of the wire , affect the cooker ,

can you tell me how to open the black wire box on a zanussi oven model no zoa35502xd

what if i have a cooker wall socket? can i install a plug to a cooker wire?

Very helpful thank you

BIG THANK YOU

Its very helpful but then which distance can a cooker control unit be installed from a finished floor

MINDS GOT DIFFERENT CONNECTORS ON BACK

Well... that seems simple. Can't wait to have my oven explode as soon as i cook something XD ...narrrr everything seems fine. I've done everything correct, i just had to trim the wires because it wouldn't fit neatly, was my decision to trim the wires right?

Does it matter which live or neutral connection. 123

Thank you

Could be my eyes but yhe brown live wire looks like its going into top left hole not middle left..🤔

What voltage is that cooker? 220-240v?

thanks 👍👍👌👌🌷🌷❤❤

Thanks man

Thanks v . Much, this video safe 50 € for me. .

Just don't use a big ass screw driver as you will fuck the head of the screw right away! Learnt my lesson.. anyway thanks saved nearly £100

Is using crimps a good idea?

thank you

2:55 The cables I have seen have bare earth wires with no sleeve - are they okay to use?

Where’s the wire coming from Cah I can’t see it

It's hard to see in the video due to the low quality of the image, but it looks like you're directly tightening stranded wires under the screws without any sort of crimp/ferrule used. If so, that is a very bad and more importantly quite dangerous practice that also goes against regulation. It's something that should never be done as it greatly increases the risk of accident and/or injury.

Thank youuuu almost wasted my chicken

Could you make another video please but more blurry.

why are there 6 connectors when only 3 are needed ?

Mine looks nothing like that

CHEERS

Gg

Curry’s charge £95 for 5 minutes work installing fee 🤬🤬

This video does not comply with the current wiring regulations for the cooker cable. You must use the cooker manufacturers recommended cable. Technique is Ok in my opinion.

This is quite simply the WORST connection box on the market, do not buy this cooker as your Electrician will want to kick the shite out of you by the time he's finished connecting it

He is wrong about using 6mm cable .10mm is the correct cable to use under recent regulations

It is important that all electrical appliances are installed by suitably qualified person registered with a competent person scam ? Wrong there is no legal requirement for any one to be registered with a competent person scam or to-be qualified . You clearly are not qualified or competent, as you have mentioned nothing about tightening the terminal screws to the manufacturers required torque setting or electrical testing the cooker before switching the power back on, ie continuity ie R1+R2 and insulation resistance test. And to complete a minor works certificate to certify that the install is safe. and what safe isolation and locking of the MCB then test to prove the circuit is dead . I have been an qualified electrician for thirty three years so I know you are talking rubbish. Do the job right or leave it to the professionals. Also you have put out a video showing the general home owner how to install and connect an electric cooker, and you mentioned nothing about safe isolation and proving the circuit is dead by testing it with a GS38 approved two pole voltage indicator and locking off the circuit MCB RCBO. And what about filling out a mirror works certificate. .what a pilchard.

Thank you