I never received a dongle on my installation, great video. nice to see these quality videos

Wooow I really like how in details you explain everything I wish we can be in communication

Another question our power is a bit wonky here in the Philippines. If AC isn’t properly grounded and I use the solar array to power up do I need to ground the inverter someway?

Hi Andy, thanks for the video. I can’t find battery code for N Power? Any idea what’s that?

Hi Andy. What do I do when the bottom light on the LOGGER is solid and the middle one flashes for over a day now and nothing else.

Thanks Andy but it would be nice to go through each setting 1-20 with an off grid in mind

I have 9 x 450w panels producing 9,8A and 37,5V, what is the best setup for 2 of these invertors in parallel

Very cool thanks looking to buy that in enverter

does the SNA5000 need/support CT clamp/coil? if so how and where do i connect it?

Hi Andy, I am struggling a bit with my dongle, the lights not going solid, the new app also doesn't allow me to find my WiFi connect...Can you pls assist

Hi Andy. Is Luxpower SNA 5kW inverter compatible with N energy 4 8kwh lithium ion battery ?

I've just bought one to be installed in Zimbabwe my question is will l be able to pair it with my mobile device since the professionals there don't have a number/reference from you? Thank you.

Hi Andy, are Greenrich battries compatible with Luxpower SNA5000

Hello sir..i am so glad i saw your video on this offgrid system..you mentioned that if it is first time to powerup a brand new inverter, battery shld not be used as power to wake up and setup the inverter. It shld be open thru ac supply..in my case the area has no grid present.what is the optiion if i may know..thank you

Thank for this. I did the unthinkable and reset the wifi thing to factory default. Could you perhaps share the UART settings? I am sure it defaulted the baud settings, so now it does not connect to the inverter

good day, how do you change from 50ah to 100ah as the dynesse is a 100ah battery

What is the purpose of battery input? Considering i use it in n pure off grid. No DU at all

Does an off grid inverter need AC or can it work without ?

Good training

Hi. I have a problem with my invertor. The time keeps on changing. Can I contact you somewhere. Thanks

Hi Andy, great video. Does the SNA have basically the same functionality as the Sunsynk 5kw online hybrid?

Hello, I hope you can clarify something for me. At the 5:10 part of the video you say you have a 50AH battery connected. Isn't the battery a 100AH battery? The reason I am asking is that I have Dyness B3 batteries rated at 75AH each. However my lux power SNA5000 says its a 50AH (just like yours) When I add more B3 batteries it goes up at 50AH per battery as opposed to 75AH per battery. I believe the SNA5000 has a 200AH battery limit. I have 4 x B3 batteries and 2 x SNA5000 inverters. I was told to parallel the batteries (300AH) and connect them to both the inverters at the same time. I also want to parallel the inverters to a single phase . The webpage does not give me the option for paralleling that is shown in the manuals? Is there a forum out there where I can get some assistance?

Morning thanks for this information but how do I set it up using a iPhone

Hi Andy, I just installed my luxpower inverter with dyness battery, but it seems like it's not charging my battery

Hi what do I use for the customer code to register on the app?

So glad someone made this video. Just got the same setup. Exited to get it up and running. Can you maybe tell me how many 330w panels I can put on it. I see the voltage is 385

Hi. I see there is a connection facility for a generator. Is there a place where one can set the charge rate for that port as to prevent charger overloading the generator?

Good day, installed a Lux power inverter for one of my customers. We used a Elithium Battery. I do not know the brand value to use in order for the system to see my battery in setting 3. What should I do to determine the brand setting?

Hi Andy, How do I get in contact with you with regards to a Luxpower inverter settings

Hi Andy. I have just installed our first Lux Power hybrid inverter. How do I get a customer code as an installer?

Please, explain how to use a generator for charging battery? I connected wires from generator to L and N to invertor. It doesn't work. Just trying to charge (i see on display) and disconnected. It is going again and again everytime. What is the problem? I have the same invertor and battery

Hi, if the Dyness 48100 is a 100ah battery, why is the inverter displaying the capacity as 50ah? I have the same setup and its also displaying 50ah instead of 100ah.

Hi Andy my LuxPower trips for a few seconds when the batteries are fully charged and the switches on again. Why is this? How do I fix.

Hi Andy im having problem with my luxpower login app its saing network problem. but there is no network problem. Im from southafrica.

Great video thanks. What should the dip switch settings be when connecting to a Pylontech up5000 lithium battery, can’t seem to get them to connect

Hello. A friend purchased LXP-5K Hybrid Inverters with Meritsun batteries. im trying to connect it to internet for remote monituring using application. but it requires a customer code, can you aid with that?

can you explain pls how to enable the dongle again so i can connect to dongle hotspot. the problem is i set the dongle to station mode.i dont know how to access again to change to AP and Station

Hi Andy, I have a 5kw S volt lifepo4 battery. Wich battery setting do I set? The manual does not give me a setting for this battery.

Hi Andy, my inverter trips quite often at my holiday house. Is it possible to reset it remotely through the app as we are 2 hours away . It has the dongle and i have the app on my phone. Can you possibly connect to my inverter to troubleshoot. Im prepared to pay for your time. Not sure if the battery has had its day. Its shoto lithium type.Thank you

I'm on this video because I didn't feel like reading the manual lol

Hi Andy video on setting please

E o bên nhật . Dien chi có 207v thôi. Zậy có cấp vao ac in duoc ko a

Hi Andy I bought a similar lux power inverter But the inverter is failing to connect to a Hubble AM-2 5.5KW Battery please assist

Hi, How do I get a customer code? I am an installer and want to register a plant

10:32 the three lights do not flash green at this point. I waited a while. It only turns green after it’s connected to the wifi.

the lux power dongle can restore to factory default.i cant access the hotspot of the dongle. i set to station mode

Where can I buy this Inverter 🤔

Which setting is correct for a felicity 8,7 kw battery?

how do you change to a new hub code

Hi Andy, my data logger/wifi dongle will not switch on the "INV" LED. I have taken it out and put it back in but only the bottom two lights go on.

Hi there, can someone answer my question please, if there is a video will be appreciated 🙏🏼Questions: If you turn off the power at main breaker and then back on does the inverter connect to the grid immediately?

Hi Andy hope you are well I am struggling to register my Dogle USB it can not pick up my wifi even if I am close to my Router I have try everything I would like to deregister and start the hole proses from start plz help

How do i disable the solar power exporting to the grid ?

My inverter is on battery full, but stop giving power, any ideas please

Не можу розібратись з налаштуваннями інвертора, спочатку поставив кислотні акб. Інвертор їх не заряджав по вольтажу, довелось ставити зарядку по часу, і виставляти щоб заряджав з 00:00 до 23:59 тоді запрацювало. Зараз купив літієву батарею asterion. В меню 20 брендів але не можу знайти рсошифровку чи ж мій у списку. І зараз при виборі на інверторі літжвої батареї він її взагалі не бачить

Hello Andy Have a lux power 5000 hybrid inverter with two elfbulb 100amp batteries and cannot get inverter to communicate and charge batteries Have set 03 lithium with setting 6 and other numbers but nothing maybe wire color coding on pin plugs into 485's ports.Please can you advise Many Thanks Regards .Love Your clips . Simple clear well done

I need the video on settings

My dongle is broadcasting a ssd what do I do

Hi, how do I reset the dongle? Im not able to pickup the wifi network...

Well the inverter LED does not come on for me until after I have connected it to Wifi. Never has.

I have connect the dongle. 3 light are stteady on by it shows offline on app

Great product, absolutely SHOCKING after sales service. Your support tickets are just ignored.

My guy did not read the manual and I now need to get the app up and running. How do I do that?

Mine says offline and cannot see it under wifi devices. 🙁

How i get a supplier code if my supplier doesn't have. Customer code?

But why at 5:00 your inverter detect accum as 50 Ah, if it is 100 Ah ?

Got ot

please post link to shop wifi kit LXP Hybrid 3-6k I don't have.

Why not just put all settings in the menu. On the inverter....

Hi, I am struggling to set solar charging batteries bcz batteries are only charging on Ac, when I connect solar panels only doesn't show charging, I am using luxpower inverter, 5 x545w panels, lithium battery,

Приветствую Ошибка внутренней связи 2 Не принимает с сети и не отдаёт в бекапе Батарею показывает Сеть показывает Без сети пишет статус Нормал Как появилась сеть сразу в ошибку падает в статусе! Кто подскажет?

"Show you how to paralelle not one, but two machines. "- What am I watching ? , put one inverter paralle with itself? Pretty sure the bare minimum is 2 inverters working in paralelle...

When everything fails, read the manual, ZA style :P

Not for areas with no internet, dont buy this

THE MANUEL IS REALLY BAD ENGLISH ...USES LANGUAGE WHICH BEGINNERS CANT UNDERSTAND ... PLEASE MAKE A MANUAL IN PROPER ENGLISH

Howzit bro i installed a 5kva lux with 4x lead acid batteries its working fine but not charging the batteries what must i do