If you are interested in this kind of video explainers visit us at www.VideoProduction4U.com Construction Lifting Slabs New! Visit www.deltael.com for more info!
Пікірлер: 43
@rufustrunt98892 жыл бұрын
Absolutely the best music for a video like this. Tight drum track and solid bass groove. I was to busy rocking out to learn anything.
@praisethankgivingworshipsongs6 жыл бұрын
Beam less slab. Great animation, really informative. Thanks
@bigtsayain84365 жыл бұрын
The engineers that figure this stuff out...respect.
@oracle7965 жыл бұрын
Thanks for the vedio. That was a great construction.
@mohammadibrahim-75516 жыл бұрын
Awesome animation...
@user-on5gk5wr5x5 жыл бұрын
So good animation!
@Try015 жыл бұрын
how does the mechanism of this hydraulic lifting system work? is there a video?
@user-zm4eo2hd3h4 жыл бұрын
Very nice system. Thank you🌹🌷
@videoproduction4u8974 жыл бұрын
TY for kind comment. Ivica.
@prakashsingh97986 жыл бұрын
Great..
@carlcampbell68274 жыл бұрын
The weight of those slabs is mind boggling. How much curing is needed of the concrete before lifting?
@videoproduction4u8974 жыл бұрын
This could be normal concrete slabs without any special curing. Sorry for the delay. All the best, Ivica.
@anonymousperson49433 жыл бұрын
Names of buildings which have this construction ????
@marianlee32335 жыл бұрын
great video
@videoproduction4u8975 жыл бұрын
Thank you for comment ...
@skumar10143 жыл бұрын
Is there a technical document that you could share on this? Maximum spacing of column, separators for casting each slab, max weight per each jack etc?
@videoproduction4u8973 жыл бұрын
Thank you for watching our video. Yes, there is. Feel free to contact me for more info via email office@deltael.com . All the best, Ivica
@ArnelHinson4 жыл бұрын
just curious, are they going to cut holes on those slabs for the path of the stairs after?
@videoproduction4u8974 жыл бұрын
This is just an animation. In reality, slabs are produced according to the project with holes for steps before lifting. All the best, Ivica
@mariekatherine52384 жыл бұрын
Isn’t this the method used for a building in Bridgeport, CT, mid-1980s, that had a catastrophic failure? Resulted in two dozen fatalities?
@videoproduction4u8974 жыл бұрын
Our system is much more reliable than the previously used systems because the locking is done by inserting wedges into the openings. Otherwise, you can visit our website and see the construction of the Russian business center Surgut Naftagas. The whole process of erecting six 10-story buildings was done in about 30 days.
@mariekatherine52384 жыл бұрын
VideoProduction4U Thanks!
@carlcampbell68274 жыл бұрын
Is it frightening working underneath the slabs; or is it just me? The mind does funny things with those that work in areas with history of serious seismic activity.
@francoislama83245 жыл бұрын
THIS SYSTEM existed over 40 years ago in the United Kingdom . Same technique developed then by LIFT SLAB.
@geraldduncan98556 жыл бұрын
Looks like a combination of basic modern jump form and 1950's lift slab technology that died an early death.
@carlcampbell68274 жыл бұрын
Gerald Duncan - So what do you know about the early 50s and 60s lift slab technology that died? That was some pretty incredible stuff to see in action, don't you think? I know of a couple of lift slab buildings in No CA that were condemned; not sure of exact reasons and what were remedies tried?
@didge1104 жыл бұрын
@@carlcampbell6827 Hi Carl, don't know much about lift slab. I teach construction in Australia and have only seen it in books, but it is never used here. From memory, the jobs in the books were in England and they mounted electric motors to hydraulic jacks that were positioned at the top of the columns. Those jacks rotated threaded high tensile steel bars (that were the full height of the column) and at the bottom end of the bar it ran through a large nut (for want of a better description) that was fixed/ welded to a steel plate that was cast into the slab. So a number of slabs are cast at ground level, then the top one is lifted by the twisting motion of the thread rod, then the cast in plates are welded to the columns, then repeat the process. There didn't' appear to be any bracing in the whole system so you have literally hundred of tonnes of concrete suspended in the air with next to nothing to stop it twisting and collapsing sideways in the event of some wind. That would have been my only concern, otherwise it seemed like quite a smart idea - eliminates all that suspended formwork for the slabs (which supposedly accounts for 1/3 cost of reinforced concrete structures).
@gordonshearston75903 жыл бұрын
They used this system in North Sydney back in the 1980's
@didge1103 жыл бұрын
@@gordonshearston7590 Wow, didn't realise that. Good idea in principle but bracing would worry me
@ahmedzahwy14346 жыл бұрын
what is this system called in french ?
@andrecantin16874 жыл бұрын
oh la la
@drejeremy7 жыл бұрын
how about the beam ?
@videoproduction4u8977 жыл бұрын
For beam watch this video kzfaq.info/get/bejne/pKeDqNyep8vJZn0.html or contact us at office@deltael.com for more info.
@petersrightbut82976 жыл бұрын
Stay down south..
@videoproduction4u8976 жыл бұрын
Dear Sir, would you be so kind to explain your comment?
@petersrightbut82976 жыл бұрын
Digitib sure, happily, your construction methods have proven to be unsafe, not allowed in Ct.
@lshepherd58593 жыл бұрын
too expensive
@MolotovWithLux5 жыл бұрын
#accesstoenergy
@carlcampbell68274 жыл бұрын
Very annoying music for very interesting engineering video
@stanfordleeham89224 жыл бұрын
Robot arms and s form size truck robot is coming soon and sensor of s form wood
@stanfordleeham89224 жыл бұрын
S form deinstaller robot vehicle moving faster like kart