I recently tried controlling a train with a smartphone, but the driver told me to mind my own business and hung up.

I bought one of these HM6000 and was lucky enough to have the power supply when they were in stock. I’ve been very impressed ... I operate a ‘cab control’ system and this allows me to operate two cabs remotely away from the control panel. It’s been very useful during the past couple of weeks while testing a new fiddle yard without having to go back to the control panel each time. I’ve also been very impressed with the slow speed running and control. The sounds are a little bit of a gimmick ... adds a bit of fun ... but sound decent through the sound bar and woofer! I’ve installed Double-Pole-Double-Throw switches to allow me to swap between the HM6000 and fixed position controller on the control panel ... very pleased with the increased flexibility. A reasonable price as well ... 👍

I reckon this will be one of your most popular vids (over time), this is a great move from Hornby. The sooner they start dropping them into traditional "train sets" the better. Great vid as always! :)

I’ve got one and it’s been excellent so far. Also, if you switch the Bluetooth mode in settings from Mesh Provisioning to Standard BLE, connecting the device is way quicker Great video!

I guess I'll be the contrarian and say that my model train activities are among my greater excuses NOT to look at a screen for a little while, these days, so the last thing I'd want to do is make my train-time Yet Another Thing I Need A Mobile Phone To Do. I suppose this would be fine for those who'd enjoy it, but I'll keep my switches, buttons, and knobs, thanks. :D (Disclosure- I've never used any Hornby control hardware, digital, analog, or otherwise)

"And as you can see here, it's coming in at Number 2 in the rank book, just below the Johnson 1P"

Have to admit I was considering getting this when Hornby announced it last year. I've since made the move over to DCC so I don't really need one anymore but it's great to see it in action. Seems like a good step forward for Hornby and makes sense considering how everything has the ability to be controlled by an app these days. Great video as always Sam 😃

I have already saiud that, this controller is roughly 80% of the advantages and functionalities of DCC at 20% of the cost. It's a good alternative for a small to medium-size layout. It is also something for train collectors who wants to run vintage models with most of the advantages of DCC without butchering their engines to put a decoder in. For the power supply, I was looking at my Tomix Neo 1000 CL imported from Japan by myself for my N gauge british image layout, and reused now for my Japan N Gauge forthcoming project. Tomix seels it with a 100-240v 50/60hz transformer with an output of 12v 1,25 amps (power supply is 100v 50 or 60 hz in Japan depending of your network), and they done something that Hornby had to consider : on the mains input, they have an IEC C7 female plug. With the transformer being universal, you just have to buy the right cord with a C7 male plug on one side, and the mains you need on the other side. NCE sells its DCC medium-size unit withour cord, and with a C7 plug for worldwide sales, why does not Hornby uses this obvious solution ? By the way, with a UK plug, I can deal with a UK to Schuko adapter sold in my convenience store for less than 2€, same voltage and frequency in France as in the UK. Anyway, it's an interesting product if you don't need to run 50 trains simultaneously, and don't have a broad layout. For roughly the two thirds of the domestic layouts, this would ass DCC functions at a decent price for people interested.

1:44 this bit always cracks me up

Well if I want to sit in front of a computer screen to play trains, I use a train simulator on a PC. The nice thing about model trains is, in my opinion, that you do not sit in front of a computer. Well... who needs an app when there is a controller??

@sam's trains - regarding power supplies (and lack of). There are a few things going on here to think of: 1. Hornby know that many people may use multiple of these and use one layout power source. So for them all the power supplies (if included) would be waste 2. We have a huge issue of waste electronics. A power supply is not trivial. We do not need thousands of unused bundled power supplies ending up in the bin. At best they might get recycled. At worst they might end up in landfill. 3. If they bundle the PSU they would have to charge correspondingly more anyway. So people using a single 15V bench PSU for mutiple units would have to spend even more. Which might make it uneconomical for them. 4. I will accept that their price for a 15V 1A PSU is a bit high. I work in the consumer electronics industry. The cost price for a PSU like this is about $3.50 (US pricing as everything in electronics is). On top of that there is shipping profit margin etc, and retail always costs more due to stocking etc, but even so, a price of about £12-15 would seem sensible to me. You'll think this sounds high, but really, all the stack up costs of retailing these does add up significantly in comparison to the raw unit cost. The other thing worth mentioning is your advice not to use a PSU rated more than 1A. I wouldn't worry about this. I think they have designed to use several all off one bench PSU. Your 1A PSU is not limited to 1A BTW. That's not how they work. It is rated for 1A over all possible input voltages and ambient temperatures. But if you try to pull more than 1A it will supply it. At some point there will be a current limit and it will go into burst mode (also known as hiccup mode) but it will be considerably higher than 1A. You can't rely on the PSU to current limit into your device. Instead the device should self-protect against output shorts. I would expect Hornby to have designed this in. (Actually Hornby have probably not designed this themselves, they will have used an electronics design partner, probably in Taiwan or China, to design this product for them to their specification). Anyway, here you go.

Been looking at this as an option for my small DC layout ever since they announced it more than a year ago. Your super review on the plus and minus has sealed the deal for me! Just need to figure out how to get one and the adaptor (planning to get the P9300 4A transformer) to Sri Lanka!

Hi Sam. I watch your channel with great interest. I like your enthusiasm to the hobby and you can talk clearly without stuttering etc. Some videos I just switch off. What I'm on to say is your video about the Hornby HM60000 was so well produced it really decided me to get one. I had great problems trying to link it to my Samsung phone, and in the end gave up after hours of trying. As a last effort I tried connecting it to my Samsung tablet and it worked first time. A lesson here is to try a different piece of kit. The main reason in contacting you is to warn you that I had to return the HM60000 as it was of no use to me. I set up a circle of 2 rail track as a test track and all worked great. However, when I connected it to the main reason of buying it, to my Hornby Dublo 3 rail layout, it was useless. The overload protection is so sensitive it triggers at most points and sometimes just on curves. I spent some time trying different locos, but the result was mostly the same. It seams that the HM60000 is so sensitive it triggers at the slightest short, where older controllers only overload with a short circuit more than split second overload. Dublo 3 rail tends to spark a bit, so this may be something to think about and maybe warn Dublo 3 rail enthusiasts of this problem. I am still using Dublo rectifier/controllers bought around 1950. Dublo 3 rail does not like the HM6000. Keep the videos coming, and good luck to you. Cheers, John Scott.

I am a little glad there is no transformers to connect because I am from the states and don't use the same power supply

Hi Sam- long time watcher, first time commenter! I'd love to see more on these (I know Hornby offer a few different units, plus it would be fascinating to see how the performance at 4amps compares!)- looks absolutely fascinating. And then also, just a massive thanks to you and your incredible content- you've even got my girlfriend starting to ask questions about model trains! Cheers, Chris

I connected the unit and the P9300 (4amp) with my I.T. dept help, my daughter, with no problem and I am very impressed. Being 75, poor eyesight and arthritis, although I would like to have DCC and it’s benefits, alas my days of crawling under baseboards fitting droppers are over, plus the expense of fitting 70+ locos. My layout is 18’ x18’ square it has been a real pain having to correct a fault on the layout involving turn off transformer, correct fault, go back to transformer, only to find I have to go back to fault again, involving a lot of walking around. Having the luxury of taking the controller/HM 6000 to the fault is fantastic. I am also impressed with having the ability to adjust the acceleration/deceleration and braking features definitely adds more interest to driving the locos. Having now the ability to roam around my layout and not be tied to the transformer/controller is brilliant. I have encountered only one major problem and that is on PECO insulfrog long diamond crossings, every loco when crossing them nearly always shorted out, I never had this problem before with the Gaugemaster model D. I suspect that the HM6000 is just more sensitive to shorts?.

Good review and seems quite a good product. Motors start and run slowly with lower frequency PWM I.e 50 to 300 Hz but you can hear this and may heat the motors at low speed. At higher PWM frequencies the motor cannot respond to the pulses so effectively sees DC. Hornby has given a few options so try with your motors. PWM typically provides less torque than DC so when you held the locos this could be a factor as we as power supply limiting. PWM controllers generally use a MOSFET to provide the power, these devices easily cater for a few amps even without heat sinks, and given that Hornby offers a 4 amp supply option I would suggest that a couple of amps per track would be easily catered for.

Great video Sam! Really interesting to see how it all worked out in the end. I was tossing up between choosing this or going DCC as a way to control my layout. I decided to go DCC and got a Hornby Select which to be honest is serving me very well and really isn’t too bad, especially given the price of other DCC controllers. I really hope that Hornby make a DCC version of this app in the future as I would definitely use it and it would be a great addition to the range they have.

Great reviews, always a go to for honest reviews. I have purchased a micro Bluetooth speaker from Amazon and fits perfectly into a hornby goods wagon, it gives great sound effects from the app directly next to the loco running on the layout.

From what I've read, PWM is only a little harmful at the slower Hz. It generates heat within the motor windings from the longer voltage spikes. for model train motors the high setting will probably give you the best mix of slow-speed performance and motor heath, but the mid would most likely be fine too. The option to choose is fantastic and is certainly needed in future controllers.

This looks like a game-changer for DC controllers :) Thank you for your review

I have connected this to two of my DC circuits and I like it a lot. I like the acceleration and deceleration mode as many of my locos don’t have flywheels. I use it on my iPad as the screen is bigger and I use my phone for taking photos. I have a 8’ x 4’ layout so the power output is not much of an issue with me. I guess the only issue is you might need to power your device for long train running sessions but I have bought another one plus transformer to connect my other 2 circuits to and as 1 is a shunting yard the tip about the Hz settings is useful. I only had 2 very old controllers so this is a great upgrade in my scenario

I love the idea, I'm just not a fan of all the model train stuff going digital. Having a controller with a knob and hearing the click as you change the direction of the trains just gives off the whole ascetic of the hobby. Blu tooth/ digital lighting would be cool but for some reason I just can't ditch my controller, loved the review though!

The TTS decoders if fitted with a good speaker do not sound tiny I recommend the 2w 4ohm bass speakers from digikey the totally transform the sound of any sound decoder.

There is an extended version of the manual on the Hornby website. In there it says that the maximum output of the controller is 1.5A on the track output. Hornby recommends the P9300 power supply for maximum performance. That will give you 4A from the power supply, but the unit itself will not give you more than 1.5A. I use mine with a 15V 2.4A. As long as your power suppply is within 15V 1A and 4A you should be fine. The plug needs to be a standard 6.3 mm, 2.5 mm DC plug. One power supply, given enough Amps, can easily power additional HM6010 point decoders with a splitter.

Wow that controller looks good I may go and get on of them at first it thought it would be like the train set controller but no it is so much better

Thanks again Sam for another informative review. Was about to invest in a 2 channel Gaugemaster, however now I am leaning towards one of these. I love the control offered and the ability to hide the controller away and just work from my iPad anywhere in the room. Not to mention the difference in price!

Great review- thanks Sam!

Hi Sam, Like you I was quite excited when this came out but couldn’t find a review. You have ticked all the boxes for me, now to get one 😎

Thanks Sam! This is really interesting and it seems to work quite well. No doubt it will be improved over time as well. The sounds will be good for people who don’t have any sounds at all and maybe a nice intro to sound for beginners. Video idea for you: take your worst performers as crawlers and see if you can improve their crawls using this unit. Cheers!

Ahhh, can use the sound effects (steam whistle, brakes squealing) when I switch back to my old duette! Brilliant.

Got one of these out of curiousity and I'm really impressed with it. Although the sounds are a bit of a novelty they sound much better through a Bluetooth speaker.

I was thinking of getting this - excellent and informative.

Hi Sam, I’ve been running one for the last few days and I’m quite pleased with it. My issue is that the sound isn’t of brilliant quality. In addition it’s difficult to coordinate the rhythm of the sound with the movement of the locomotive. I guess the sound is a novelty rather than being something for a serious modeller. Thank you for your fine review. Very best wishes, Adrian

quite brilliant - excellent review - thanks !

I connected this controller to the kids (6&9) table top layout. The sounds were actually a big hit, we play them through a Bluetooth speaker for better effect. You can stop the trains from stopping when the app closes in the settings tab in app inactivity control you just click disable . We also have found this controller very convenient because of its size. I hard wired it in. I just think it’s a faff to keep reprovisioning and connecting but I think that may improve with further firmware updates. You can update the HM6000 through the Bluetooth which is also really cool.

Well this video has convinced me! It did say you can run 2 or more of these hm6000 so you can run more lines so I may need two of them! Thanks for the video,

This looks cool! Awesome video!

I see a lot of guys asking about a DCC equivalent. There are a few solutions out there: 1. MRC (Gaugemaster in the UK) has a Protigy WiFi module 2. Digitrax has an LNWI WiFi module. 3. ESU has a Loconet converter to use the Digitrax LNWI 4. NCE is tricky to do, you will need to use JMRI As for apps, there are a few out there. I use WiThrottle, but there are others.

Thanks for covering this, I had seen this in the brochure and was curious! I will stick with my gaugemaster too though, actually my layout is very power hungry, I'm using the O gauge controller which has a 3A output, is much more stable.

Thanks so much for this review, I was looking for a review on this product only yesterday. It seemed to good to be true bearing in mind the price tag but after seeing this video I’m going to buy one on Monday.

Been waiting with bated breath for this review!! Thanks Sam 👍🏻

Well, I can see this being very cool for those who have analog and want some of the fun of feeling digital remote. For price and functionality it definitely has "bang for buck" as we say in the USA. Some things for Hornby to upgrade, clearly, but a nice device. Nice review.

Hi Sam, have already added this comment to your video on the shuttle module, nice work soldering the diodes by the way * grin. I have emailed Hornby to see if they can add a shuttle feature to the HMDC app so that you can set up whatever interval you want and incorporate the inertia and acceleration settings too if possible. Obviously you still need the diodes at each end but it think if it was added to the app it would make it even more fun and appealing to people. Don't even need to solder either if you don't want to. Just use two isolating tracks with a diode and jumper wire.

Great review Sam. I hadn’t noticed the pwm settings before. Will def check these out. Also, I found that most old wifi router transformers will fit, for those who are having trouble getting the ‘proper’ ones. They are usually only 12v not 15v but seemed to work just as well as the proper one. I think that syncing the sound better to the speed changes could be done via software update. All in all, quite impressed! Also worth mentioning that it’s very very light.

Thanks for the review. I do enjoy your channel. I actually think the low power performance assessment was a little unfair given that they said you could connect a 4 amp controller. Also - given that, they can't really say how much power will reach the track because you actually have a choice of inputs, and most likely the current will also vary according to the load your locos will represent.

Hey Sam, great video! In your opinion, is the HM6000 or the guagemaster better for the health of loco motors?

Cheers Sam! Interesting review mate. I must say this seems to be a far better set up than I was expecting. Really like the measure of trim you can apply to the controller to accommodate your individual loco’s needs. I know what you mean about the connectors but then I guess Hornby always did put their own connectors on the wires (I remember the old long thin metal pegs you had to push home into the old style power clips 😉) so perhaps that is to be expected 🤷🏻‍♂️ I rather like the emergency stop feature even if it isn’t completely instantaneous and that brake feature looked quite good, a bit like using the old Compspeed controllers (which had a push button increase/decrease function). 👍 Yet another very interesting review. I may actually be tempted by this for my pop-up garden railway as it means I can wander about, especially if I can get a 4amp supply 🤔 Cheers mate 🍀🍻

Although I didn't and still haven't got a box, I installed the app as soon as I knew it was available so that I could pre make and create new layouts. However there're some strong suggestions I have for the track maker being things such as having more types of track (such as a triple point). To be able to select your gauge so that you can have multiple gauges in a single layout. And that when you shrink the board, the track should automatically move to fit.

Hornby P9300 4A power supply - £42! Ouch! Not for me thank you, I'll stick with my boring "traditional" controllers. They've got lovely knobs too! :)

Sam, yet another informative video. I bought one but failed to connect to 8 android devices. After much squealing from the driver (me) I eventually 1. Forced app stop. 2. Deleted cache and data. 3. Enabled GPS (not in instructions, why?????) 4. Device scan -and located. The 2 issues are a gap in the steam chuffing and that low speed buzz, worse on some engines than others. Now fully operational Many thanks

“Unless your Apple” Made me burst in laughter, I always appreciate a good laugh, thanks Sam!

Got mine when it came out and actually managed to get a power supply! Love the app and everything you said. I agree the disconnection is frustrating however you never know what will happen with updates I guess.

Ive been waiting on this one.

Looks an excellent bit of kit. With an excellent price as well. Cheers for the review. 👍

Great review, been waiting for it. I'm planning on doing a garden railway so this should work well for me as hopefully I will be able to go outside and control the trains with the power unit indoors in the dry. Any chance of doing a quick review of how far the Bluetooth reaches? On the subject of PWM. I use an old H&M Duette which has a PWM setting which allows me to get most engines to crawl very slowly, even the old Lima's. I understand that the issue with it is using it for sustained periods, it is really designed for doing small amounts of shunting or similar. If you use it for a long time 'apparently' the motors get very hot and can be damaged, although I have not seen any evidence of that myself - but then I do operate and end to end layout. Perhaps another idea for a video - how long does an engine run on PWM before the motor gets very hot! Keep up the good work.

I have been using two blueRailways bluetooth controllers for the past two years and they do exactly the same as the Hornby HM6000 with sounds as well. They connect every time you open the blueRailways app and are easy to control using phone or tablet. The only difference is you can only use Android devices. The app is regularly updated and the support from blueRailways is fantastic. After watching this video i will be staying with my blueRailways controllers.

That's so cool!! Hope you are going to be using then in your next vids....

There are defiantly a ton of possibilities with this, maybe we can see like I programmable plan for running. Like start from a station run around twice and stop at the station. Or run from one end and back. Maybe they add different sound packs to the app. IE a merchant navy pack and a flying scotsman pack or a class 66 Pack. Maybe a light option could be explored. Short answer just go DCC but some of us don't have the time, money or understanding for that.

Lower pulse rate for lower speed: 50 years ago I had an old H&M controller with a 'half wave' setting. I think this did the same thing: just gave half the rectified voltage for crawling, but it made the motors buzz.

Very interesting review, thank you. I noticed when this controller was announced, and thought it might be a good option for some people. One of the things that strikes me is that if they ever wanted to improve anything, for instance the sounds, all they would have to do is update the software, which presumable could be re-installed on the smartphone or tablet. Nearly makes me want to get a smartphone or tablet!

This looks very interesting. Great video. Smaller than I expected. A fair faff to start with on the app.

Have mine delivering tomorrow. Cheers for the review. One question do you know of a 'building' I could hide it and the 6010 in?

Awesome video today Sam I will have to get one of these it would be so much easier and wonder how it would be with Bachmann Thomas locomotives

I wondered when you would be covering this!

Great vid Sam! If you don’t mind me asking, could you review the Gandy Dancer by Bachmann?

Hi Sam. A very interesting and up to date piece of technology is what we have here. Such a shame that the Cons listed in your review let it down, particularly resetting and.....NO power supply??? That's ridiculous. I think I'll stick with my Gaugemaster controller and HM 2000 feedback controller for the time being. Have had to pack my layout away now, in anticipation of moving house over the next few months. Ho hum! Best, Pete.

Hi Sam, Yes very enjoyable review, About time something like this came along, ( they could make it a 4 track and upgrade the transformer to 4amp?), I might consider one, All the Best Brian 🤗

Agree very good video - not bad prices around £30 Hornby although the premium of Adaptor is a lot at £20.00, should have done bundle version of around £35 - £40

Hi again Sam, Would it be practical to put up the make and model of the power source you bought for the HM 6000 as I was wondering about compatibility of the jack plug. Thanks, Gordon

Interesting, when I finally get my layout set up this could be quite good for the 009 part I am planning

That is a very interesting controller, might pick one up myself! Have an amazing day Sam!

Hello, this looks great but can I ask do the engines need to be dcc or just normal, as well I'm building a new track so do you say getting this is better or just the normal controller ?

The higher PWM-frequencies are mandatory for a special type of motor used in modified locos, so-called coreless motor. A loco with a coreless motor could be operated a lot of smoother. But common toy motors like those Hornby inserts in their models could get overheated by high PWM-frequencies. So this is quite an important setting.

The app will install on a touchscreen Chromebook if you prefer using a laptop with a larger screen (for designing layouts) to a phone. I think the PSU is the same as supplied for the eLink. A drawback with Bluetooth you don't test in this video is the distance between the smartphone and the HM6000. Users with large layouts might find themselves out of range of Bluetooth down the other end of the room! Thanks for an interesting review.

Sam, this has very little to do with the subject you are covering here, but it seems that this is you latest posting,and of the moment, so here goes! On a previous posting you showed and expressed your great liking for things Southern. So many various locos are available of the shelf, I delighted to say, but I would love to see a model of the Drummond T14. Paddle box , what a handsome machine it was. There’s a beautiful photo of one in D.L.Bradley’s London & South Western Railway Album, published by Ian Allan! What a fabulous model it would be! Regards John.

Sam... one thing i'm curious of... can you connect two devices to the sme hm6000 unit?

This what I was really confused about it and looking forward to the live stream and last week was my birthday and I want that special birthday song

The size is great. No Power Pack, Pants. Is fitting a 4 amp power supply good for your engines? I think not. And the best bit is still to come!!!!! The HM6010 what a fantastic piece of kit that can only control 4 sets of points. There are forty on my planed layout alone. 10 HM6010s. Nice idea Hornby, but a UNO3 connected to an Arduino can control 16 sets of points. Dream on Hornby. martin. (Thailand)

Hi sam! Great video - just wondering - when you mentioned about the power transformer, do you need the specific one (p9100) or any 15v one? I've been having trouble with mine because of the lack of the needed transformer. If you have a quick response, please reply. Thank you.

Now this look like fun!

It’s a sams trains phone revel 😂😂 Thx Ben :)

Really impressed by this system. I'm really going to consider getting it. I assume it will be fine for older locos?

Well software and power supply, 🔋🙄 then you might be able to enjoy it then. Keep on having fun mate with your railroad. Could you do a shunting video please.

Great Video Sam. I use DCC for my layout, but really want the iTraveller set coming out. I think this system looks interesting. Just need to convince my wife it's a good idea!

Re. your intro about power supplies. Having a PSU rated for more than 1A does not mean it will supply more than that, just that it can safely do so. The controller will draw what it needs and no more, and exceeding the amp rating of a PSU is far more dangerous than having a PSU with a higher rating than needed. The only downside to a higher rated PSU is more expense.

A review I've been waiting for. I'm considering getting one for my 0 gauge garden railway, because wireless is better for the larger space, and I don't think DCC in the garden would be very cost effective. Already downloaded the app, which looks good to me. I know the transformer isn't the same as the older r.965s or other DC controller, but is it the same as used by the select/elite/elink? 4 locos for 10 minutes without cutting out (like the r.965s and newer do), seems like it should cope with a single 0 gauge loco ok (at least one small dapol one at a time, which is all I have atm (an 08 and a 14xx), may need to upgrade for if/when i get a heljan 37). So yeah, will be purchasing one from my local model shop, Sunderland Station Models, where I might actually start doing a little bit of work depending on finances and stuff since it's a small shop. Maybe for a future development, hornby could produce their own bluetooth handset to go with it, so you don't need a smartphone or tablet to operate it. Since it looks like if I'm using my phone to control the trains, I can't then use my phone to video them at the same time.

Hi Sam, so far I have a hornby GWR trainset (track pack A included) and The Aberdonian trainset however I cant decide how I should extend the railway further. What are your suggestions?

love this box for mobile phone control

thank you for reviewing this trying to get one here in the US is a little hard

No use asking me what I think. I haven't got a Smartphone, and I wouldn't swap my Hornby train set controllers for it, no way. Send the controller back if you're not confident enough to use it. Stick to Gauge Master controllers, you know how to control the speed of your engines with those. Besides, the HM6000 could be a catastrophe waiting to happen on your railway. I'm glad we haven't yet come to "How to burn down your Model Railway Part 3". Kelly Ashford and Sonic the Hedgehog say so.

never been this early before lmao.. Hey Sam! This be an interesting idea

Protocab are already years ahead of this with battery in the loco and radio control From a hand held. No need for power thru the rails at all. Alas, unlike Hornby, they haven't got the £100,000 they need to get their OO sized system on the go (their O system is available, of course). Why can't Hornby skip systems which are at least a decade old and step into the 21st century with a system which abandons powered rails altogether for engine/tender rechargeable batteries and wireless control.

Looks really good, does it make the same noise of the starter hornby PWM controllers, it was a bit of a shock using them after using the old r965 controllers

I think I might get one since I don’t have DCC.I would love to Bluetooth the sounds to our speaker on the deck where my missus sits and annoy the crap out of her.

Great ingenuity

A DC model train controller that can work from your phone. Something that Bachmann didn't do when making their EZ-app trains. They instead only work when 100% power is applied and you control the speed of the locomotive with your phone (similar to DCC but more complicated) I don't like that the to track wires are hard-wired in either, meaning you can't use this with other track systems, especially those that aren't OO/HO gauge It's nice to have a small sound board in the app if you just want to play locomotive noises when running those that don't have sound

Hi Sam, having slated the black/red and silver/black cheap Hornby controllers in a previous video I was getting anxious about using mine. This HM6000 seems to solve that problem and your video was well presented and very fair. However, I never know when you plug in the 2 pin power connector into the track connector which is positive + and which is negative - because if I want to add extra power feeders to the track how do I know that I'm getting the polarity right, or would it short out and do damage if I get it wrong ? 2nd question is: Does 'double heading locos help on inclines, and allow you to pull more carriages up an incline ? and do they have to be of the same ratio; i.e. 2 x 4-6-0, as per my Hogwarts express, or can I add a 0-4-0 with it ? Cheers, Rick the Bulldog

I’m actually quite interested in this. I’ve à stock list of older Dublo, Wrenn, Lima , Airfix, Mainline, various kit built and Triang Hornby stuff. Much too much of a collection for DCC to be an affordable option. I’m still in love with my ancient H&M Duettes, Clippers and Walkabouts with a large layout wired for full cab control. My next project will take me out of the garage with a large loop around the garden. So this may be the way to go for me to be able to follow my trains and control them when I’m outside. I reckon I’ll definitely need a 4 amp power supply though - especially for my Dublo and Wrenn 8F’s and express locos. Any chance of your doing a test of one of these older « hungrier » engines with the HM6000 Sam? I seem to remember you have a few Wrenn locos in your fleet.

Would this be suitable for a small-ish O gauge garden layout, possibly with a 4 amp power supply?