Too Big For Most Locos & Burnt Out After 1 Day | Hornby's New HM7000

  Рет қаралды 107,124

Sam'sTrains

Sam'sTrains

Күн бұрын

Try a decoder here: bit.ly/3KjiBUY (Affiliate)
A full review of Hornby's new HM7000 Bluetooth DCC system for use with smart devices.
Become a Sam'sTrains engineer here: / @samstrains
Get your Sam'sTrains merch: teespring.com/stores/bullmane...
Thanks for watching!
Email: samstrains@outlook.com
Instagram: / samstrainsofficial
Facebook: / samstrains
Twitter: / samstrains
0:00 Intro
5:02 Features
6:24 Unboxing
11:04 Decoders Don't Fit!
18:00 21 Pin Installation
19:10 The App
24:56 First Test
29:07 TT Loco Testing
32:13 Interruption Recovery Times
35:43 Range Testing
37:12 Using Standard DCC Controller
40:45 Pros and Cons
49:43 Decoder Failure

Пікірлер: 925
@olivermiles6858
@olivermiles6858 Жыл бұрын
Sam, regarding the functions, you don’t need to import a map. You can go to the function tab and setup your functions pages yourself. Click into each function and you can edit the name, icon, function number etc. You can also drag and drop the functions on the grid to rearrange.
@SamsTrains
@SamsTrains Жыл бұрын
Thanks Oliver, I'll have a look at that... would be much better if the functions were just there to push by default, as with every other controller! Thanks for watching, Sam :)
@bear470
@bear470 Жыл бұрын
My local model railroad club here in the US has their layout set up with the dcc system through a secure wifi system to use both dcc controllers and smartphones. I used my phone to control my personal rivarossi allegheny, and though there were a couple of hiccups, it worked fairly well
@42cerberus
@42cerberus Жыл бұрын
There are 2 major drawbacks with this system that I can see. You've touched on the first one with the size but it appears that Hornby have designed the decoder round their own locos and only their own. That means, as you have seen, the chances of it fitting anyone else's are slim. Secondly, as this is a Hornby system, they control the sound files you can upload. Got a Dapol 59? Want sound for it? Sorry, not a Hornby model so you aren't getting it! Got a Bachmann 66? Want sound? Sorry but we designed the decoder so it won't fit in anyone else's models. Hornby seem to exist to support their own models and get you to buy only those.
@SamsTrains
@SamsTrains Жыл бұрын
Thanks for sharing! Yes I'd say you're right on the first point... and only the TT locos at that, as I can't recall having any Hornby OO locos with a Next18 socket. Agreed on Hornby's control of the sound files... but they stand to sell more decoders if they give some customisability to their customers... can't see what they've got to lose by not doing that! Thanks for watching, Sam :)
@mikewoods4177
@mikewoods4177 Жыл бұрын
Sam how long will they remain free to download? Other developers get market penetration then start to charge. There must be a cost to Hornby to record the sound files. So how long will they continue to subsidise modellers. Just asking!
@chestertonroad4565
@chestertonroad4565 Жыл бұрын
Who's to say they won't release further sound files for non-Hornby locos? It seems logical that they would start with files for their own locos. Why would the decoder not fit in a Bachmann 66? There's loads of room in them.
@mikeking2539
@mikeking2539 Жыл бұрын
@@mikewoods4177 That's a very good point!
@speleokeir
@speleokeir Жыл бұрын
I believe they are concentrating on sound files for their own locos first, which is fair enough. Once they've done that then it would be good if they considered adding profiles for other locos or provided an option for people to add their own sound files. Whether that will happen I don't know, I guess it depends on whether there's an benefit to Hornby of doing so.
@scotmcmanus9401
@scotmcmanus9401 Жыл бұрын
Another good video, Sam. I am surprised that you did not start with the TT model or a recent Hornby one. I thought it was pretty obvious that Hornby designed this system with their locos in mind. Same as Bachmann and Dapol do with their chips although there will be some useful crossover. It will be more interesting to see if the other decoder manufacturers start to make compatible decoders. I think this looks like a great system with loads of potential.
@BoaFilmsPlc
@BoaFilmsPlc Жыл бұрын
Scot, as far as I know, the only other firm that makes decoders that operate with bluetooth is Soundtraxx in the US.They released their new Blu-nami decoders at the end of 2022. I do like the concept & hope Hornby won't take as long as Soundtraxx are to release the app for Android users.
@dink_lesbian154
@dink_lesbian154 Жыл бұрын
I know next to nothing about model trains but it seems like every hobby or profession has that one company - you know the one, they've been around for decades, make decent stuff, occasionally do something really innovative, but constantly make weird corporate decisions or products that don't work quite right. Watch collecting has Seiko; electronic music has Roland; and apparently train modeling has Hornby.
@TrainsCatsOtherStories
@TrainsCatsOtherStories 9 ай бұрын
Used to be Dapol for a while but apparently they're making a turn around
@Barnaby_bo
@Barnaby_bo 5 ай бұрын
What has Seiko done that didn't work?
@w0NdER1X
@w0NdER1X 4 ай бұрын
Well there's also PIKO and ROCO if you can't buy hornby
@Azeria
@Azeria Ай бұрын
@@Barnaby_bo their value on the low end has evaporated and their QA is garbage.
@ivovanzon164
@ivovanzon164 Жыл бұрын
The only reason that the decoders won't fit is that the pcb size is dictated by the antenna. If a version is offered with a separate antenna pcb the size issue would be solved
@simonturner5450
@simonturner5450 Жыл бұрын
Interesting and informative review Sam. One angle that you didn’t mention is that, certainly an iPhone, is limited to 3 to 4 Bluetooth live connections at one time. This might be a deal breaker for anyone who wants to double head a couple of trains simultaneously on their layout.
@andrewtongue7084
@andrewtongue7084 11 ай бұрын
& that's the point, Simon, iPhone are notorious for being unilateral - as are Hornby....unless the latter have a change of heart, I cannot see this getting off the ground, because it's (already) a self-limiting exercise....
@PuuberZ
@PuuberZ Жыл бұрын
It doesn't beat the click and turn of a good controller Knob but it's great that people have more choice.
@TheRip72
@TheRip72 Жыл бұрын
Real trains are hard to get going & take a lot of planning to stop. Having instant response at the turn of a knob is a huge cheat around this. So if you like driving trains, it beats a turn of a knob hands down. It depends on your preference doesn't it?
@tonyrobinson362
@tonyrobinson362 4 ай бұрын
​@TheRip72 I found it wasn't that hard to bring a peak to a stand at Chesterfield with 12 mk2s behind, But I kinda know what you mean.
@derronbailey9332
@derronbailey9332 Жыл бұрын
Great review Sam. Although I don't use or enjoy DCC much, I can definitely see the benefits to this system. As it's the first if it's kind it is understandable that there will be issues, but hopefully this will be a good first step for Hornby and other manufacturers to hopefully get the ball rolling, and bringing this hobby into a new age.
@johnwalkley6746
@johnwalkley6746 Жыл бұрын
As has Lego, but in a much simpler form.
@krazytroutcatcher
@krazytroutcatcher Жыл бұрын
I like the idea of Bluetooth, it seems to have potential. Hornby will have to look at resizing the board, or maybe an extension lead so the Bluetooth board can be located elsewhere? A dummy board would be good too, so we could try it for fit before purchase, to make sure we can fit them to existing locos.
@wapphigh5250
@wapphigh5250 Жыл бұрын
Awesome idea! It's really hard to return a DCC chip after purchase as retailers often think you've messed around with it already
@SamsTrains
@SamsTrains Жыл бұрын
Yeah I do too - and while it worked this was really great to use! An extension lead would have helped a lot - reckon this could have fit into a few of the locos I tried if it had one! Thanks for watching, Sam :)
@allanmorton6022
@allanmorton6022 Жыл бұрын
​@@SamsTrains in the hornby livestream today they even said it could be fitted into a coupled wagon behind the loco. Not sure how you would connect it up though.
@ZappaTime
@ZappaTime Жыл бұрын
@@russcole5685 , did you watch all of the video, he went down 2 floors in his house and it still worked.
@bazza3643
@bazza3643 Жыл бұрын
Hi Sam, I’ve enjoyed this very formative video. I noted your comment at the end, about the decoder burning out. Over the past 25 years or so, I have installed a range of decoders in my models, including TCS, Lenz, Bachmann, Hornby, NCE and ESU. Out of all these various decoders, the only decoders that stopped working for me have been the Hornby decoders, which do not seem to last the distance.
@clementmatchett
@clementmatchett Жыл бұрын
As I have written elsewhere, I had the same problem with loading the sound profiles for Flying Scotsman. I think the Hornby server became overwhelmed, because when I tried it at 6am one morning, it worked fine. These 18 pin decoders are really intended for locos designed for 18 pin, which so far is a category which is largely confined to TT120 ones. But I think the new Dublo Merchant Navy is either 18 or 21 pin, and I presume the new decoders will fit it. I haven’t ventured into trying the 8 pin decoders so as to convert my 00 locos to TXS sound and Bluetooth control, but again, I assume the Hornby 8 pin TXS decoders will fit at least the majority of Hornby locos, and perhaps some other brands, and the pictures show that some components are on a separate harness. As to burning out, I have been running three TT120 locos on this system without problems, using the Hornby 4 amp transformer, which I believe has short circuit protection? Are you sure your Powercab has? It looks like space junk from Apollo 13!
@wapphigh5250
@wapphigh5250 Жыл бұрын
Hi Sam - ignore the negative comments. I thought this review was great! You are one of the most respected reviewers on youtube and had every right to call out some of these issues. Keep up the great work. This sort of review is why I come back to your channel and has (and will save me) many hrs and dollars building my collection. Respect. Wapp.
@HighFell
@HighFell Жыл бұрын
Why would any right thinking person ever think a review by an uneducated person was good? Sam doesn’t understand the technology behind this system, that’s pretty clear. The evidence is in his own video. You can convince yourself that an uneducated person telling you what to think in contradiction of the truth is a good thing or it could be you are in denial of reality
@mkaustralia7136
@mkaustralia7136 Жыл бұрын
Sam has more education on these things than I can get by reading the selling brochures and the positive reviews by the various press and KZfaqrs. If I have to read the papers with the items plus a 200 page user guide and risk the thing burning out as at least two have, my commercial sense says wait and see. If I add to that Hornby’s approach to the hobby, I am uncomfortable investing a few thousand pounds into converting my DCC ready locos to this system. I was astounded by the vehemence of the model shops I contacted to buy some Hornby product recently. Sam is a fan boy for Hornby by comparison. I then tried buying direct from Hornby, but individual postage for each coach in a rake of 4 wheelers and their dismissive reply made me realise just how much brand equity had been destroyed by the current managers. That leads to loss of trust, so that plus the issues above means I am not going to rely on Hornby for the lifeline to operate my models.
@wapphigh5250
@wapphigh5250 Жыл бұрын
@@mkaustralia7136 Are you saying you've tried 2 HM Bluetooth chips and they have burnt out already?! What were the circumstances? Thanks
@PebblesChan
@PebblesChan Жыл бұрын
Local Aussie retail Hornby prices & availability are influenced by exclusive distributor Southern Model Supplies. Getting anything sent from the UK or Europe is often expensive.
@GaryNumeroUno
@GaryNumeroUno Жыл бұрын
"Tight is fine... as long as it fits!" No truer words have been spoken mukka. 😅
@thedepot7416
@thedepot7416 Жыл бұрын
I have the dc Bluetooth controller, recently started to use it, no issues and seems to work fine
@markedwards1511
@markedwards1511 Жыл бұрын
Very interesting review Sam! I assume it's also possible when using a DC power input, that you don't need to remove any other non-DCC Locomotives from your layout as long as you have isolated sections of track? Therefore you don't need to convert all your loco's at once, but as your budget allows for and still run both. It must be possible to station your Bluetooth loco (with sound off) and bring a DC loco out of a isolated section to run on the same track as the stationary engine. No more worries about damaging your locomotives!
@DangerAngelous
@DangerAngelous Жыл бұрын
If these chips didn’t become self-fried and only come in large, these would be the perfect gateway for people like me on the fence between old reliable DC and ultra precise but previously expensive DCC. Very much appreciate as usual your thorough testing of absolutely everything with these!
@steveb2985
@steveb2985 Жыл бұрын
In the past I have dcc'd old locos with a pre wired 8 pin socket which you can then place anywhere in the loco body .I'm sure these are available for 6,21 and next 18. All it needs is a male to female extension with a 15cm ribbon in-between ,then you could place the chip elsewhere. Maybe someone will bring it to market.
@TheRip72
@TheRip72 Жыл бұрын
I have never seen a 21-pin, Plux or Next decoder with wires. The whole point is that they are tidier with no wires hanging off & should be a standard size which should plug straight in. It is worth pointing out that the only Hornby 18 pin loco Sam tried was the TT120 Scotsman. The others were from different manufacturers.
@rogerwindsor2130
@rogerwindsor2130 Жыл бұрын
There are already adapters Availiable from dcc concepts
@steveb2985
@steveb2985 Жыл бұрын
Yes I get the point but if it doesn't fit then an adapter is the next best thing,thanks Roger
@DJE2025
@DJE2025 Жыл бұрын
👍👍Hello Sam, very good video! In depth and quite informative and well done. I'm from across the pond, I do enjoy and follow a number of UK modelers. I watched a video from Jenny Kirk yesterday covering the new Hornby Bluetooth decoders and App. It appears to be a very cost effective decoder and has all + more then most other manufactures. Here in America your going to pay over $100 for a decent decoder (just crazy) It will be very interesting to see if there are more issues with the decoder burning out in a day? I thoroughly enjoyed your video. 🚂🚂
@Flymochairman1
@Flymochairman1 Жыл бұрын
Nice one Sam. As long as the prices remain keen, I can see a few older loco's coming out of storage for this system too. A great review, as ever, and thanks again. Cheers!
@1maico1
@1maico1 Жыл бұрын
Most of the ESU and Zimo non-sound decoders I've bought have clear shrink wrap to protect them. Hornby should consider that. Everyone should use an insulated screwdriver to avoid static.
@cuebj
@cuebj Жыл бұрын
And an earthing wristband, just like working with computer parts
@kiwitrainguy
@kiwitrainguy 11 ай бұрын
The ESU decoders that are 8 pin ones have the shrink wrap but the 21 pin ones are bare.
@StormmyStormmy
@StormmyStormmy Жыл бұрын
Hi Sam, great honest review, this system looks very good, a lot of modellers use TTs decoders in Bachmann locos with great results, maybe Bachmann should invest and produce their own bluetooth system, going on what they charge for their items it would probably cost a kidney to buy one, hopefully somebody will produce a generic system for all manufacturers to use bluetooth. I'm a big Accurascale fan, maybe they will bring out a bluetooth system in the coming years. By the way what burn out after one day?
@10C45E
@10C45E Жыл бұрын
it's at the very end of the video
@bigZCNC
@bigZCNC Жыл бұрын
I can see this working well for garden railways where its deadrail. I am thinking of buying 1 to install in my L guage Duchess and running of a 4 cell LIPO.
@1tonyboat
@1tonyboat Жыл бұрын
Hi Sam . fitted a HM 7000 to a Bachmann class 37 Friday ( class 31 sound file ) read the instruction first .......Very impressed ...
@SamsTrains
@SamsTrains Жыл бұрын
Very glad to hear that! My 21pin decoder gave me no problems either, and it still works now too! Thanks for watching, Sam :)
@stormbowman7148
@stormbowman7148 Жыл бұрын
The 21 pin decoder size is within the limits of the NEM specification of the MTC21. This means that it will fit all locomotives with a MTC21 pin socket. This should cover 99% of all models on the market with the 21 pin socket. You might be able to fit the Next18 non sound version. It is much smaller decoder.
@kiwitrainguy
@kiwitrainguy 11 ай бұрын
NEM 662 covers the specs for the Next18 decoders and the dimensions for sound decoders are bigger than the ones for non-sound decoders.
@johandecramer8896
@johandecramer8896 Жыл бұрын
Nice balanced review again, thank you for that. I ordered a Next18 sound decoder, intended to use in my Sonic A5 or Heljan NER Railcar. I'll see if it fits. Simon Kohler said however, that the next badge will be smaller in dimentions, so this is a possitive! Succes with getting a replacement for your decoder.
@wapphigh5250
@wapphigh5250 Жыл бұрын
Did he say the next batch will be smaller for ALL chips or just the Next18? What you said is huge. I would wait. Where is that link to what Simon Kohler said?
@allanmorton6022
@allanmorton6022 Жыл бұрын
Great review Sam. It's amazing what we find when a new product comes into contact with the reality of a Sam's Trains review. I always wait until you have reviewed something before I decide to spend any money. Lots of hiccups which Hornby will need to fix, but other than hardware faults most of the system can be upgraded remotely as long as you can actually install the chip. A talking Thomas may one day be a reality! Keep up the great work, Allan. Hope you get a free replacement for the burnt out chip. 😂
@allanmorton6022
@allanmorton6022 Жыл бұрын
​@@Haymarket47 He certainly should.
@SamsTrains
@SamsTrains Жыл бұрын
It's been sent back already - I'm opting for a refund rather than a replacement, as I was hoping to use it in a OO loco ideally! Thanks for watching, Sam :)
@HulaViking
@HulaViking Жыл бұрын
JMRI. I run JMRI on an old Windows 8 laptop and use an old Android phone running Engine Driver app. Kept them out of a landfill with their new life on my railroad.
@georgemartin408
@georgemartin408 Жыл бұрын
It’s very early days for a completely new system. Hornby freely admit it’s a case of constant development. They also have enough small locos of their own to realise that they will need to solve the chip size issue.
@TheRip72
@TheRip72 Жыл бұрын
They do need t shrink their decoders, but do they make any small OO tanks with an 18 pin socket? All those Sam tried were from other manufacturers.
@rich81090
@rich81090 Жыл бұрын
I generally fit stay a lives to all my locos, I normally use dcc concepts as you don’t have to be an expert soldier to attach to stay alive but size is certainly going to be a issue. Also in a garden layout 30ft probably isn’t that far, range would be something I would like to test further.
@JulianSaunders
@JulianSaunders Жыл бұрын
Great review Sam and thanks for showing us how 'good' the Hornby HM7000 DCC system is. LOL. I shall be sticking with ESU and Zimo sound decoders with my NCE DCC control system.
@1234mattyman
@1234mattyman Жыл бұрын
Regarding the power loss and how long it takes to come back on is because it has to reconnect to Bluetooth as Bluetooth sometimes is slow to connect. This should use WiFi or WiFi direct which would be faster to connect. Bluetooth is slow and always will be. Great video as usual.
@Stettafire
@Stettafire 4 ай бұрын
Bluetooth also has much less bandwidth then WiFi, which is why even things like Bluetooth headphones often cut out. There is particularly a known problem with Bluetooth on windows because of the bandwidth. I really don't think people should be using Bluetooth for things that require complex controls. Even most gaming controllers use either USB or radio signals
@1234mattyman
@1234mattyman 4 ай бұрын
that is so true, that's why i suggested this should use Wi-Fi or a USB dongle or something with more bandwidth than Bluetooth. @@Stettafire
@henriknilsson7851
@henriknilsson7851 Жыл бұрын
I have a Hornby Coronation 8P that needs a chip. Maybe a Hornby Mallard. If they make this as an 8pin decoder I might give this a try.
@jamesdunloptrains
@jamesdunloptrains Жыл бұрын
Awesome video today Sam really interested to see where this goes
@neilsmith1941
@neilsmith1941 Жыл бұрын
Good video the system looks good and sounds good but will they be any good for n gauge which is what my layout is keep up the videos Sam
@richardc6681
@richardc6681 Жыл бұрын
Sam, the size of the next18 board is defined by NMRA standards. There are two standard sizes, one for sound fitted and one for non sound fitted. Is the board actually bigger than the sound fitted standard? (Table 1 of the standard gives dimensions).
@richardc6681
@richardc6681 Жыл бұрын
I've just answered my own question by downloading the hornby manual. It seems the board is longer and wider than the standard. Strictly speaking it is therefore incorrect for Hornby to call it Next18 compliant/ compatible.
@SamsTrains
@SamsTrains Жыл бұрын
Thanks a lot for looking into that for me! I suspected as much, as I couldn’t actually find a non-TT loco that’d fit!
@jackdripper5675
@jackdripper5675 Жыл бұрын
@@SamsTrains Sam, you use decoder extension cables . In small locos decoders are often squeezed into tight spots away from the socket.
@melchestermodelrailway
@melchestermodelrailway Жыл бұрын
That was quite a bombshell at the end Sam, but thanks for being so diligent in your reviews. I hear some people say "Sam has bad luck with his loco's", but I think it's only because you put models through their paces and actually discover faults overlooked by others.
@bjoe385
@bjoe385 Жыл бұрын
I tend to have similar levels of bad luck with my trains.
@peteryeadon946
@peteryeadon946 Жыл бұрын
​@@bjoe385 Me too 😢. You have my commiserations.
@LaZeRJET
@LaZeRJET 6 ай бұрын
Can you Still run a loco with Sound with a Normal DCC Controller when the app is Off?
@paulburns6090
@paulburns6090 6 ай бұрын
If you get the dongle for say the Hornby Elite it will simultaneously work with the App so you can turn to dcc mode with the App , then just use your controller. The controller will store all relevant cvs etc you changed with the App. So i think yes you can.
@LaZeRJET
@LaZeRJET 6 ай бұрын
@@paulburns6090 Yes you Can i tryed it lol
@drevo50
@drevo50 Жыл бұрын
Thanks for the helpful video. I'm looking forward to trying a 21 pin sound decoder in my new Hornby 9F on DC. Would be a game change for me if it works. Just got to hope it lasts longer than a day...😁
@alantoms3263
@alantoms3263 Жыл бұрын
Nice little review Sam. Is there any chance Hornby have got the exhaust beats right, or is that aspect stuffed as normal? This is THE reason I can never consider DCC Sound - I need a really expensive DCC-S chip to permit correct beats / chuffs. All other sounds are likeable gimmicks - the exhaust is what's important on a steam locomotive. Al.
@Elvinley
@Elvinley Жыл бұрын
Absolutely true!
@eggs_trains
@eggs_trains Жыл бұрын
I think il stay with dc
@zachariahmclaughlin919
@zachariahmclaughlin919 Жыл бұрын
Not AC how new fashioned
@tmdrm9817
@tmdrm9817 Жыл бұрын
I agree with you fully!
@OwenBudd1
@OwenBudd1 Жыл бұрын
I have a DC layout but I’ll be honest, I think this kind of system is both an improvement and convenient enough for me to convert over to. I’m almost positive that the cons Sam has outlined here will be resolved in 12 months of further development.
@johnhughes3796
@johnhughes3796 Жыл бұрын
You are missing so much staying with an antiquated system. This Hornby system might be flawed but there are plenty of other better functioning ones around.
@eggs_trains
@eggs_trains Жыл бұрын
@@johnhughes3796 I do have a gaguemaster DCC controller
@ianjackson6751
@ianjackson6751 Жыл бұрын
Good review Sam wondered when you were going to cover this new system.cheers
@xenon53827
@xenon53827 Жыл бұрын
Will these work with three rail tin plate track? (ok, so my system is a bit older...)
@NWRJ_WStudios
@NWRJ_WStudios Жыл бұрын
I think Sam Hornby designed these decoder to be fitted into there own locomotive, and not other manufacturers. Cheers Jasper & Willow
@Robutube1
@Robutube1 Жыл бұрын
If you're correct, it is a poor marketing decision because it would restrict sales.
@mkaustralia7136
@mkaustralia7136 Жыл бұрын
Agree as Sam said, Sound Fitted would be dead as an option as even at a reduced price it would still not come with the smart phone app interface which seems superior to other DCC controllers. Everyone else would have to improve, but in the meantime there are thousands of DCC ready locos which could be chipped if the owners desired.
@phil36310
@phil36310 Жыл бұрын
Hi Sam, By now there are many reviews on this new Hornby TXS - HM DCC system. What strikes me every time is the lack of insight for no one has consulted the 'Full Reference Manual' - let alone the 'Quick Start Guide'. So a lot of guessing and supposing and even pure nonsense (on a particular well known channel ) etc. I do recomment everyone to consult this very well written and well explained manual. It's a must to understand the 'system' - for help setting up - fine tune and then enjoy any loco you have equipped with a TXS decoder. It's only normal that Hornby first provides this system for their own stock of locomotives but according to the latest life show other non-Hornby sounds will be released in the future. Downloading your own sound is excluded - understandable. Besides if you want to do this with systems as ESU and the like you need a serious investment in hardware to be able to do so. And yet not all sounds are free ! The problem with the size of the decoder can be solved using a cable Next 18 male / female or you could try to loosen the support board from the chassis. And hard-wiring is always a solution with the good old 8-pin version.. A con ? One need to be 'inventive' as we did and do with 'ready to repair' stock. What no one mentions is that the chuff rate for steam locomotives is NOT synchronized. Explained in the 'Manual'. With all the high tech and possibilities of this new decoder this is a real let down. So high end ( read expensive ) decoders from the competition will remain for the 'purists' of fidelity to the prototype. In the end you can't get a Lexus for the price of a 'deux chevaux'. But let's give Hornby and Hammond Morgan the credit to bring a system to the market with a lot of bells and whistles for a very reasonable price and without the need of expensive Command Stations that are outdated anyway. DCC with BLE is indeed 'the' future'. And this is only the start... Cheers, Filip
@1maico1
@1maico1 Жыл бұрын
Come on, which channel is guilty of talking TXS nonsense?
@macnavi
@macnavi Жыл бұрын
Why is it understandable that you can’t download your own sound? They could make it so easy and another winner over the “old” way.
@OlivierGabin
@OlivierGabin Жыл бұрын
The idea is good. The realization by Hornbyy has some serious drawbacks, the worst of it being a closed and proprietary system.
@phil36310
@phil36310 Жыл бұрын
@@OlivierGabin Well Oliver, Hornby is not a specific only 'Decoder producer' but a toy manufacturer and in that perspective their range of locomotive sound comes first. Other non-Hornby sound will follow - give it some time. I'm still awaiting the Android version. Patience is required... Happy model railroading.
@OlivierGabin
@OlivierGabin Жыл бұрын
@@phil36310 Logical... I have skip the Android part (smartphone plus tablet for me). Wait and see...
@DJ_K666
@DJ_K666 Жыл бұрын
We were controlling our layout at Warley with smart phones, using a Raspberry Pi through a Sprog and with JMRI installed its all NRMA compliant and we had sound. Personally i think this is a relatively new system so there will be issues and certainly the size could be fixed although adding bluetooth elements to sound elements means they have to go somewhere and that means a bigger chip. I'm not sure whether that means hornby locos are made with it in mind in future or not but certainly i can see other manufavturers scrambling to keep up. I believe there are other bluetooth chips in the US but it'll become more widespread over the next few years.
@Elvinley
@Elvinley Жыл бұрын
I had a few issues with TTS chips burning out a few years ago. Hope these aren't as delicate as they are. The more expensive decoders have some level of protection.
@Puter4472
@Puter4472 Жыл бұрын
I think it's brilliant you will need to measure the area your putting it but other than that it's amazing especially for the price!
@BoaFilmsPlc
@BoaFilmsPlc Жыл бұрын
Hi Sam, I feel, as a DCC sound person, a few errors in your assessment of the Hornby decoder. 1) "Why would you buy from another decoder maker?" If you look at the major brands, ESU & Zimo you'll find they make various sizes of decoders to fit any size of loco. As you found with the Next18, only your D11 & TT A1 would accept it. The size of the decoder was a major issue. Add in the speaker plus a keep alive and you might find things won't fit anywhere. 2) Expecting to fit them in non-Hornby products or locos designed before these decoders were.. Again this is why I will be wary about using them over say a Zimo or ESU simply as Hornby have used a one-size-fits-all mentality. 3) Most ESU & Zimo decoders can play up to 8 sounds at a time. The new MS decoders from Zimo use 16 bit quality. 4) Soundtrax in the US released a similar Bluetooth system back last year. To date, there is still no Android app available, will Hornby be the same? Not everyone worships at the Church of the Bitten fruit! 5) Do you truly think Hornby will create sound set ups for competitor's locos? I highly doubt it to be honest. This, like the TT:120 are Hornby's own. I own a Roco Z21, the only function set ups i can get are either Roco or Fleischmann models from the last 10 years. I do like the idea of the decoders, but the size, the lack of Android app & the tie-in to 1 manufacturer puts me off buying them. Keep up the great work.
@wapphigh5250
@wapphigh5250 Жыл бұрын
Excellent comments
@SamsTrains
@SamsTrains Жыл бұрын
Thanks for sharing! Yes the size of these (particularly the next18 one) is definitely a big con. As for non-Hornby locos... very few Hornby locos have Next18 sockets... the two TT locos I have are the only ones as far as I know... so I assumed I might have been able to find a loco that could accommodate them... but no luck. No, I don't expect Hornby to create sound profiles for competitor's locos, nor did I say I thought they would. What would be nice would be the option to customise/create your own profiles within the app... that's what I said! Agreed, those are very offputting! Thanks for watching, Sam :)
@wapphigh5250
@wapphigh5250 Жыл бұрын
@@SamsTrains I 100% agree with yr review. I loved it. We need more of this objective reporting in our hobby. So why aren't Hornby saying the Next18 is just for the new TT120 range. They need to spell this out ASAP. I had a H BT Next18 on order. sam thanks for the awesome efforts and review. I will be sending it back!
@Cloudman572
@Cloudman572 Жыл бұрын
Hornby have stated android app will be available ''soon". There are a lot of clever folks out there who I'm sure could mod the app and add their own sounds and dispribution them for free. The only potential problem is are those clever people interested in trains and hornby software.
@BoaFilmsPlc
@BoaFilmsPlc Жыл бұрын
@Cloudman "Soon" as I said Soundtrax released their Blu-nami decoders which have the same set up as Hornby the end of last year. To date, still no Android app. Over 4 months....
@stillstanding123
@stillstanding123 Жыл бұрын
Good review. Like all new products pushing into new ground there will be a learning curve and teething problems for both manufacturer and operator. Adequate product testing and beta customer feedback should have minimised these and lead to product updates. I am sure Hornby will bring out software upgrades and improvements. 🤞
@PaulGarwood
@PaulGarwood Жыл бұрын
I don't have an iPad at the moment but how do you find out which one's are compatible with this new system and it would be nice to have list of locos that this range chips will fit.
@stuartdeboer8030
@stuartdeboer8030 9 ай бұрын
Hi Sam, Thanks for the review - food for thought. One thing that put me off the TTS decoders for steam was that the chuffs were far too slow and not adjustable so the chuffs could not be synchronised to the wheel revolutions (four chuffs per rev for a 2 cylinder loco). Do these new chips allow adjustment of the chuffs?
@RichardBrooklyn
@RichardBrooklyn Жыл бұрын
What happens if/when Hornby switch off the servers which host the updates, sound profiles and are required for the initial mandatory login? I asked the question on Hornby's forum and a mod just locked the thread.
@MrJoeyWheeler
@MrJoeyWheeler Жыл бұрын
It's absolutely a case of "when". Hornby do not have a track record of maintaining old software they've produced. The fact that you need to log in to play with your trains is a hilariously stupid idea.
@wapphigh5250
@wapphigh5250 Жыл бұрын
@@MrJoeyWheeler Hornby mentioned on their recent tube channel they will be try fixing this issue. We are lead to believe It was due to Apple accepting the app?
@Cloudman572
@Cloudman572 Жыл бұрын
If the hornby servers stop working it will only stop you downloading new sounds it will not stop your already downloaded sounds etc from working on the app via bluetooth. If hornby did stut down servers the a group could potentially get hornby approval to set up alternative server. The 7000 sound decoders are a nice enough upgrade on the TTS decoder from the sound side that even without the bluetooth function and a good price. If the bluetooth ever becomes unusable via the hornby app then there are relatively easy ways to use engine driver app to bluetooth control the loco and its sounds.
@RichardBrooklyn
@RichardBrooklyn Жыл бұрын
@@Cloudman572 this works until it doesn't. Look longer term. Sure you can use the app with no Internet today... Do we know how long the login lasts for without the app "phoning home"? A week? A month? Six months? Forever? Hopefully forever, but we can't verify that. Let's go beyond that for a moment... Your iOS device breaks because you dropped it (clumsy you), or maybe the battery gave out, whatever. No biggie. You go get a new one... Reinstall the app. Uh-oh, Hornby went bust/dropped support today for whatever reason. Now you can't sign in because the server is switched off. The equipment you own is now useless because it's all stuck in Bluetooth mode with no way to change it to DCC mode because you can't login. Worse still, you can't even re-pair your decoder to the new device (even if you could login) as you need to get a one time code from customer services, who can no longer help you because Hornby has dropped support/gone bust. Hornby could have just put a small reset button on the device itself. They deliberately chose not to, to force you into relying on them. That's a real shame as you purchased some sound packs you can no longer download (you didn't think all the new sounds would always be free, did you?) If Google can drop services on a whim, then Hornby can do it as well. The whole thing has been heavily architectured to *rely* on Hornby at every step of the way. Which means we need to rely on Hornby to always act in good faith and to stay in business forever for this stuff to work. Are we expecting Hornby to support this thing and run it at a loss forever and a day? 5 years maybe. 15 years... Probably not. At some point, these servers WILL be switched off. Worse still, the Bluetooth protocol they are using is not open. It's all locked down to Hornby only. One vendor, one choice. Imagine if DCC was designed like this... If it were open protocols it would matter a whole lot less. Even worse is that Hornby have very clearly ignored the next18 standards and made the boards too large. Again, another deliberate move by them to lock you in. I'll probably still buy one, admittedly. But I'll be keeping my eyes open for trouble on the horizon and I'll probably do the day-to-day stuff with DCC. Go in with your eyes open to it: vendor lock in can be very expensive.
@rogertarring6165
@rogertarring6165 Жыл бұрын
@@Cloudman572 Is the protocol used to communicate between the app and the decoder in the public domain then?
@Decrepit_biker
@Decrepit_biker Жыл бұрын
The brake function is useful as you can set the chip up such that you can shut off the throttle and the engine will continue on its own simulated momentum. You can then stop the engine by pressing brake EXACTLY as you would on a real locomotive. I also suspect that you turning the controller off and on may be causing a spike of some kind and confusing the chip. Is the controller a feedback type, if so due to the way they work they can confuse electronic things. Would be more representative to lift the loco clear of the track and leave the power steady.
@SamsTrains
@SamsTrains Жыл бұрын
No it isn’t a feedback controller - the switch just disconnects the power, in the same way that a cut out would!
@Decrepit_biker
@Decrepit_biker Жыл бұрын
​@@SamsTrains worth a try to see if there's a difference, I have had electronic issues caused by switches in the past in industrial CNC machinery. Poor or burned contacts in the switch caused arcing and upset the electronic item "reading" that particular switch.
@muir8009
@muir8009 Жыл бұрын
Just having a look at the tomix controller I've got and that after throttle off has continuous momentum, then brake applications in stages as per prototype enables different % drops depending on the brake applications. They're quite an art to use if you're used to the typical dcc/analogue user experience.
@TheYancydog
@TheYancydog Жыл бұрын
Sam- My guess as to why you lose control after loss of power under bluetooth is that when the power goes, you lose bluetooth comms to the tablet. It would take about that amount of time to recover bluetooth comm and regain control of the loco. You can see this type of lag when you drop other bluetooth devices and try to recover comms to them.
@CustomiZe_
@CustomiZe_ Жыл бұрын
They do seem tempting for larger scale outdoor layouts who use battery power. If you get a cheap dcc ready loco of ebay, take out the electric’s and wire up a 9v or similar battery to the wires where the pickups usually attach thus removing the cutting out issue, plus size won't be an issue due to the scale being larger. Wire up a motor, plug in the chip and you're good to go. A whole battery operated train with sound for £60 where it would normally cost you way over £100. Then you can have the control and the sounds of british locos on a garden railway layout where the sounds of realistic british locos are usually quite sparse. However burning out the next day, I'm not too keen about 😂
@pauleddleston2817
@pauleddleston2817 Жыл бұрын
Just a note on next18 burn out. Handling these decoders has to be done carefully and making sure that you are earthed and don`t get the fingers touching across joints etc and depositing body oils which can short out the chip. The amount of times that decoder was tried in different locos ... tbh ... not surprised it blew. If handling instructions are provided (poor if not) they should be followed.
@SamsTrains
@SamsTrains Жыл бұрын
I was very careful with the handling, and if it'd fit into the first loco I tried, I wouldn't have been handling it as much. I didn't see any handling instructions. The decoder worked all day once fitted into the Scotsman. Not sure how body oils could short out the decoder over night, at least not at these low voltages, but I'm no expert! Thanks for watching, Sam :)
@davidf2281
@davidf2281 Жыл бұрын
It's not possible to short components with "body oils" and it's also very unlikely that unearthed handling will do any damage. This is why manufacturers are happy to sell these bare boards -- if normal handling killed them the return rates would bankrupt them.
@firestarspelt
@firestarspelt Жыл бұрын
ive installed dcc in over 50 locos never have i killed a decoder by static and body oils aint going to do anything to a decoder
@CapLoz
@CapLoz Жыл бұрын
Might have tried the 18 pin in a Hornby engine. I’m sure you must have one amongst your mass of engines or did you intentionally avoid that?
@wapphigh5250
@wapphigh5250 Жыл бұрын
Which one fits?
@SamsTrains
@SamsTrains Жыл бұрын
No, I do t have one because all of Hornby’s OO locos are 8, 21, or 6 pin. The only Hornby locos with the socket (at least that I’m aware of) are the TT ones. The decoder doesn’t comply with the NMRA standard dimensions, that’s why it doesn’t fit.
@bobingabout
@bobingabout Жыл бұрын
Especially with some of my Diesels from the 1990s and earlier, including some of my Triang locos (Like the Class 35, where only one Bogie has pickups), where there's a lot of space inside the engine, it would be cool to get one of these DCC Bluetooth decoders specifically to get the power bank, as hiccups in the power are fairly common. From what I can see, 6 pin and 8 pin versions are available, which would be the most ideal to retrofit engines from before including DCC sockets was a standard.
@NotTO-
@NotTO- Жыл бұрын
TXS7000 8 pin fitted and working sweetly in a Bachmann Branchline 08 (32-115A 08021). Very much a tight fit but very doable in that model.
@Rob-Slot
@Rob-Slot Жыл бұрын
I think it's a "brilliant' idea as well. I love my "Smart Phone", I love the way it tracks my every move and basically runs my life 🥰 The more things I can add to my "Smart Phone" and more it can control me, the more I love it🥰
@turbulanceism
@turbulanceism Жыл бұрын
do you use a bank card? that tracks you more than your phone, dont be fooled by the fear mongering
@cirseltoo
@cirseltoo Жыл бұрын
It is about seven or eight years since I saw the layout "Holcombe Brook and Tottington" at Wigan show with the locos all sound fitted and the layout being controlled by smart phones. The problem with the HM7000 is that the steam sound files STILL can't be synchronised to the wheels, which is basically is a kids toy. Serious modellers still need to pay about £100 for decent sound.
@peterball8241
@peterball8241 Жыл бұрын
I have avoided DCC for years due to the amount of 00 locos I have that would need converting. However recently delving into TT120, this could be the perfect opportunity to start the new scale with DCC. Tempting!
@mattsmocs3281
@mattsmocs3281 Жыл бұрын
I trust Digitrax and TCS decoders and my NCE controller for DCC. Tsunami decoders are good aswell.
@hessxpress3016
@hessxpress3016 Жыл бұрын
$20 digitrax decoder ive thrown in anything and converted quickly
@paulredding5864
@paulredding5864 Жыл бұрын
Interesting review as it raises key points ie the need to check prospective locos hv the space to accom the decoder. Looking fwd to to what caused the burnout, could it be yr dcc controller on full is generation too high current?
@SamsTrains
@SamsTrains Жыл бұрын
Thanks Paul - I doubt I'll find out what caused the fault as I'm just returning it. Excessive current draw can only be a fault in the decoder, as it'll draw whatever current it needs. As for voltage, I was using a standard Gaugemaster DC controller, at a normal voltage Thanks for watching, Sam :)
@ianeveratt7273
@ianeveratt7273 Жыл бұрын
@@SamsTrains Hi Sam great review, I didn't see what if any ESP precautions were taken when handling the decoders could that be a reason for the next18 failure as it was handled more due to it not fitting any 00 locos
@russellbenton2987
@russellbenton2987 Жыл бұрын
I think a major innovation is that you can run DCC Sound on what would normally be a DC layout simply by turning controller to max and using the app to control . So those of us who don’t want to go full DCC but would like to dabble with the occasional sound loco are catered for
@SamsTrains
@SamsTrains Жыл бұрын
Absolutely - that aspect really is a game changer isn’t it??
@OlivierGabin
@OlivierGabin Жыл бұрын
@@SamsTrains It is. Or, I would rather say, it would be once someone else than Hornby does this, DCC on BT.
@MrHack4never
@MrHack4never Жыл бұрын
My biggest concern is when will the app be discontinued, meaning that unless you left it in DCC mode, you just have a paperweight unless BT mode can be turned off with a CV or power cycle combination
@georgewatson6184
@georgewatson6184 Жыл бұрын
Hey Sam, great video! My birthday is coming up soon and I'm wondering what new loco I should buy. I'm looking for a good diesel locomotive at around the £150 mark. Any suggestions would be greatly appreciated.
@westwonic
@westwonic Жыл бұрын
Accurascale class 37
@benforster6254
@benforster6254 Жыл бұрын
If you switch it to doc from Bluetooth do the sounds still work when controlling on your physical controller
@TheWGLOVER
@TheWGLOVER Жыл бұрын
Yes
@emmcommentary1900
@emmcommentary1900 Жыл бұрын
I use mine on my Lego Trains and they are amazing. Voltage is a-lot lower however. If you have issues tell Hornby. I would suspect because they are lose in the box, it has become damaged.
@davissampson3991
@davissampson3991 Жыл бұрын
Sam, I think your expectation that this HM7000 will fit in a non-Hornby locomotive is unreasonable. The ‘other’ manufacturers never accepted a ‘requirement’ to accommodate the HM7000 decoder form factor that was unknown until a few days ago. I think a meaningful evaluation would have been to install it into a DCC-ready (I.e., 21-pin or Next18) Hornby locomotive for which a sound file has already been made available. If it fits in another manufacturer’s loco, we’ll, that’s great, but that loco was not designed to accommodate it.
@SamsTrains
@SamsTrains Жыл бұрын
It’s not unreasonable - DCC is a standard, and the box clearly stated that the decoder complies to all NMRA standards, The NMRA specifies standard decoder sizes, and this decoder exceeded them. So no, I wasn’t unreasonable, and I stand by my criticism of it for that oversight. The ‘other’ manufacturers designed their locos to adhere to the standards. Had Hornby done the same with their decoder, then all would have been fine.
@paranoidjd1351
@paranoidjd1351 Жыл бұрын
I'm sorry you had so much grief with yours. I fitted one to my TT Scotsman and it worked straight away. I didn't even have to chose the sound profile - it just did it all automatically and with a cycling of power (lifting the loco on and off the track) it worked faultlessly. I only have a few bits of TT track and of course drove it off the end of it at one point. A quick nudge back on and it picked up almost instantly and was away. As for it cooking itself, that's worrying. I'm guessing this, and perhaps the other issues could be down to power line issues (too much, too little, being unhappy with voltage/current profiles) but it's worryingly inconsistent from what you've shown and it should never bake itself as a fault condition. My set up was literally a HM6000 power supply, straight into the TT120 DCC track connector and it just worked. I guess it could be that temperamental in it's power requirements that it HAS to have Hornby kit, but that doesn't seem right. I will have to update if I have any problems like this crop up.
@dennismarsden8982
@dennismarsden8982 Жыл бұрын
These decoders are supplied with a sound file pre loaded for A2/A3 steam
@Optimus13
@Optimus13 Жыл бұрын
I Like using JMRI with a arduino and motor shield running DCC++. and the reason why it takes a while to resume is most likely due to Bluetooth taking its sweet time to reconnect to the decoder.
@thefountainpendesk
@thefountainpendesk Жыл бұрын
I am on the team that prefers having some form of tactile experience controlling my trains
@andrewmeah3082
@andrewmeah3082 Жыл бұрын
Hi Sam I think it would be a good idea to let Hornby know about all the faults and the size of the decoders not fitting in to the locos so they can sort out the problems looks a really good system but these are the type of problems they need to know about really good video and good testing of the items and explanations
@samcoventon
@samcoventon Жыл бұрын
He won't contact Hornby, he very very rarely does, only once that I can recall regarding the B12
@modelrailwaynoob
@modelrailwaynoob Жыл бұрын
It's called product testing. Hornby should have done all of that before releasing the chips to the market.
@1tonyboat
@1tonyboat Жыл бұрын
Just fitted a HM 7000 chip to a Bachmann 37,, the chip is no bigger than the one i took out and the sugar cube ( 4 different sizes) no problem and the power pack is no different to a standard stay alive .... GOING GREAT ...
@AshWeir
@AshWeir Жыл бұрын
@1tonyboat is the Class 37 sound profile on the App?
@Robutube1
@Robutube1 Жыл бұрын
I'm pretty sure that Hornby will watch this and other review channels anyway.
@wasatchrangerailway6921
@wasatchrangerailway6921 Жыл бұрын
While everyone else is fiddling around, I am running my trains!!!
@steved5356
@steved5356 Жыл бұрын
For smaller locos go for the non-sound version next 18 - it’s a smaller decoder so should fit
@SamsTrains
@SamsTrains Жыл бұрын
That's a good idea Steve - you're probably right! Thanks for watching, Sam :)
@David_Mattox
@David_Mattox Жыл бұрын
When it comes to disappointment, Hornby never disappoint. Be sticking with DC for a long while.
@SamsTrains
@SamsTrains Жыл бұрын
hahaha that's true - real pity about that Next 18 decoder... the 21 pin one actually was perfect! :D Thanks for watching, Sam :)
@nickedwards2904
@nickedwards2904 Жыл бұрын
think it is very unfair on Hornby that you reviewed this item like this. You have done as most people will, try and install without reading any documentation and then get annoyed when you dont know what to do. You needed to be a lot more professional in my oinion and walk through the manual step by step, thats what it is there for. Not a good review at all
@wapphigh5250
@wapphigh5250 Жыл бұрын
Strongly disagree. If they don;t fit they don;t fit!
@ianbusby2845
@ianbusby2845 Жыл бұрын
Yes you need to know your onions 🧅
@nickedwards2904
@nickedwards2904 Жыл бұрын
@@wapphigh5250 u read the manual mate if you are doing a review, be fair to the manufacturer. This is not a serious review as you could see he had no idea what he was doing at times, if he had the manual open and worked through it he may have had more success. If you dont understand that it is a waste of time me explaining it
@wapphigh5250
@wapphigh5250 Жыл бұрын
@@nickedwards2904 I just watched the detailed Q/A Hornby release of the HM7000. I am not anti Hornby or HM7000 - it looks great to me! But they did say on that vid (it was aired just a few hrs ago) that the chips were compatible with other manufacturers. There was no mention about need to to check the size of the chips, or how big they were.. Just MO
@nickedwards2904
@nickedwards2904 Жыл бұрын
@@wapphigh5250 looks good to me and will stop the need for additional controllers so expect to see them going cheap very soon lol of course they will be compatible but as with locos now the size of the loco does matter and speakers etc are a very tight fit in lots of locos
@TheScotsalan
@TheScotsalan Жыл бұрын
I think its a great idea. Dont know why its taken so long. I reckon too, once its on software, it opens up a whole new world. Want a full auto layout ? Forget rfid chips and readers etc, just mount a camera in your rafters and add vision software stuff to the app ? Tap on a location on your cam display, and say what you want the train to do when it gets there. Stopping at a station as an example 👍
@michaeledgecombe5568
@michaeledgecombe5568 Жыл бұрын
Hi Sam. Great video. I'm going to give this a go. One question I have a Hornby elite controller and I see there is a Legacy dongle @ £35.99 to connect Elite to HM 7000 - do I need to buy this as well or will the Elite work without it? Thanks in advance.
@davidlee9024
@davidlee9024 Жыл бұрын
Great presentation Sam, covered all the main questions, I think i am sold, good value for the money, many thanks , pity about the size of the Decoder, otherwise a winner, David from New Zealand.
@GariTheFerret92
@GariTheFerret92 Жыл бұрын
Do they make extension cables that fit these sockets? I think that might help with fitting them into more locos that would have space if the decoders were in a different orientation.
@lukejackson8741
@lukejackson8741 Жыл бұрын
I used the to have the old, TTS cock o the north but lost it in a house move many years ago, is the p2 an available sound profile on there, as this could be an ideal option to getting sound into my replacement newer one
@TheWGLOVER
@TheWGLOVER Жыл бұрын
It is available.
@little_britain
@little_britain Жыл бұрын
I actually asked Simon Kohler the question about custom sounds, and he said it's not a feature, but he would pass the idea on to the design team.
@mikeking2539
@mikeking2539 Жыл бұрын
yes the size of almost any decoder is an issue, I use DCC and "Normal" DC for operating my railway, and just because a loco has a decoder socket inside, does not always mean that there is space for a decoder. I have tried to install two different types of decoder into one of my Hornby 08 shunters, one a direct plug in type but the body would not go back on fully. And the other was a wired version, but again trying to make it fit somewhere was the issue. We are 15 mins in to your review, and we have 3 locos that the new decoders don't fit into... And Big Kendo makes the same point as well!
@mariogunasekera5043
@mariogunasekera5043 Жыл бұрын
Thanks for another great video. Really enjoy these. On the subject of the burnt out decoder, have you heard back from Hornby ? Asking as it’s quite expensive for me to get a decoder down to New Zealand from the UK (postage alone is £50) so don’t want to rush in until all the kinks have been worked out of these by Hornby
@Parappatherapperstudios124
@Parappatherapperstudios124 Жыл бұрын
What controller had you been primarily using with the chip that blew?
@wapphigh5250
@wapphigh5250 Жыл бұрын
Yes please list any Next18 locos that will take a Hornby Next18 BT decoder. Thanks!
@brickleyyard4966
@brickleyyard4966 Жыл бұрын
So could I put the 2018 locoman a4 sound profile on to this
@davidhall5868
@davidhall5868 Жыл бұрын
I’ll stay on dc for now on but a very good video Sam can you do a review of Bachmann Gordon’s express coaches (2 composites and one brake coach) and the same for bachmann James’ express coaches
@Sebdamememan
@Sebdamememan Жыл бұрын
Good morning sam, im planning into buying some of these for my 8 pin locos , do you know if the trouble you had with it burning and dying was a 1 off situation? Im tempted, but i dont wanna go into it if theres a big risk of wasting my money and then it ending burning up, thanks for your time sam.
@SamsTrains
@SamsTrains Жыл бұрын
I’ve had a few other comments from people with dead chips, but there doesn’t seem to be a huge number… and of course you have the right to a replacement/refund if you have any problems!
@Sebdamememan
@Sebdamememan Жыл бұрын
@@SamsTrains epic, thanks man
@briandesens144
@briandesens144 Жыл бұрын
Awesome video Sam's trains
@edgiee27
@edgiee27 Жыл бұрын
Hi Sam have you seen the 'loco remote ' control system? Basically the same idea as this in garden railway scales
@lapiswake6583
@lapiswake6583 Жыл бұрын
I'm still gonna be buying regular sound chips due to their wider availability in terms of different sounds. However, I will be buying a 21-pin one to try out in my Dapol 08, now I have a Minerva class 14 with a Zimo sound chip installed. Not sure if any of the Hornby sounds would be suitable for the 57xx or 8750, or the 14xx yet. However, if the one fitted to a TT loco burned out the next day, I hate to think how one would cope in an 0 gauge loco with 40 wagons behind it...
@keiththesoundguy2890
@keiththesoundguy2890 Жыл бұрын
It’s a case of each to their own with these. I won’t be using them having tried a 21~pin version because there is no finesse in the motor control. The sound as I perceive it is just the same as TTS in both the sound samples themselves and BEHAVIOUR of the sound. The chuffs are not spaced proportionally with the speed of the wheels - they simply play at certain fixed intervals so you can hear it ‘step up’ to the next set when the physical speed rises, rather than being gradual. Thus, you will never have the chuffs in sync with the wheels throughout the speed range. The extra cost of Zion and ESU is worth it to me because I can load my own sounds. Also, I could not tolerate such a long recovery time from a power outage. Thanks for the all the videos you put out.
@Dave_at_Its_My_Model_Railway
@Dave_at_Its_My_Model_Railway Жыл бұрын
Looking at an image of the Next 18 TXS decoder, it looks like the last 10mm does not contain any circuitry and could possibly be cut off. If the BT antenna is located there, then that would be a small issue but could still be overcome. I would need to see both sides of the PCB to know for sure...
@richardrichardson2568
@richardrichardson2568 Жыл бұрын
ive seen simon from simon's shed use these decorders in the hornby tt a3 so why it doesnt fit in the p1 i dont know as the tt a3 is a lot smaller in size then any 00 gauge loco
@SamsTrains
@SamsTrains Жыл бұрын
Yeah it's odd - I guess they might have designed the TT locos with this decoder in mind... but it's a pity they didn't state that it'd be too big for most OO locos, and indeed all of the ones I tried! Thanks for watching, Sam :)
@debeeriz
@debeeriz Жыл бұрын
would a decent capacitor in the engine solve the power cutout over points
@BRWhitehouse1975
@BRWhitehouse1975 Жыл бұрын
Hi Sam, thanks for your excellent video, I found out exactly what you did, regarding the next18 decoder size on Monday this week when it arrived. It would not fit any of my small locos that I want sound and the power bank for. I to thought this was ridiculous, however I will put it away as it may come in handy in the future, I guess. I also have 8pin and 21 pin decoders. I spent hours and hours over two days trying to get one of the 8 pin decoders into a Bachmann 08 shunter and the decoder lost its sound, then would not run the train and then would not fit in the train anyway. I sent the decoder back thinking it had an issue. I then spent many hours over 2 days with the 21-pin decoder as the same happened with the sound going missing when I tried to add a new sound profile. I brought a Dapol class 73 for the decoder to fit in as I had seen someone else fit the decoder ok earlier in the week on KZfaq. I eventually realised that I was not wating long enough once the sound files had downloaded to the decoder for them to be installed correctly so the sounds were just wiped out. There is reference to waiting 5 or 60 seconds depending on whether you have a power bank fitted when you take the train off the track, but it mentioned nothing about inpatient excited users should let the sound download do its thing (walk off make a cup of tea etc) then recycle the power and import the sound mapping. I have asked for the 8-pin decoder back from the shop as I am 100% sure the same thing happened with that one. At least the 21-pin decoder is working great now on both blue tooth and DCC NCE Cab so I am hoping the future dongle will bring even more functionality to the rest of the fleet. Thanks :)
@wapphigh5250
@wapphigh5250 Жыл бұрын
Yes Sams review was EXCELLENT he does not deserve all the negative comments from all the Hornby fanboys here... Also yr comments are of great help to me ) before I venture down this same route. Clearly there is going to be *a lot* of trial and error with these - which is not how Hornby are selling it (They are giving the impression it's all fun and roses). A walk in the park?. It looks like it may well turn out to be a nightmare. Particularly for retailers (who actually give support)
@BRWhitehouse1975
@BRWhitehouse1975 Жыл бұрын
@@wapphigh5250 No worries, I may not be the greatest when it comes to understanding these technical things, but I didn't give up on this and I have worked out what was going on. Just needs a bit a patience when doing stuff, rather than me sitting watching it and jumping as soon as I thought it had finished. My fault in that instance. The decoder was telling me there was no sound and I ran through the process to install a sound a number of times but I didn't leave it long enough before recycling the power, whether that be 5 or 60 seconds. I was left thinking something was seriulsy wrong and I had damaged the decoder, so when it happend a second time I was pretty unhappy with myself. As Sam pointed out the set-up is fairly easy it just needs a bit more time for it to do it's thing. luckily I have a Lock Sound decoder tester with a motor on it so that has really helped with testing the decoders away from any of my precious trains. One more thing, the part of the decoder that has no chips on the end of it (the part that is causing the next18 to not fit in a lot of models) is the blue tooth arial and must not be cut off as some folk have suggested! :)
@wapphigh5250
@wapphigh5250 Жыл бұрын
@@BRWhitehouse1975 I have quite a few Bachmann locos chippable in the tender. 21 pin. I am sure you know the type. Around 6-8 years old. Should be lots of room. If I could get a bluetoothed sound chip in them (such a low price) it would be great. But to be honest I am starting to doubt I should go down this path. What I am reading is this. Lots of teathing problems. Sound doesn't sync. "Only for Hornby". Burn out problems. App doesn't work. Now I find out the dongle won;t sync with my digitrax controller. I was really excited when I first heard about HM7000 now I am really not sure.
@BRWhitehouse1975
@BRWhitehouse1975 Жыл бұрын
@@wapphigh5250 yeah is it a difficult one to know what to do. Might be an idea to measure the room available in one of your trains then compare that with the size of the decoders, I believe the dimensions are on the Hornby website. Also I would not worry to much about the decoder burning out as it will be covered by warranty. Overall the set up experience was fine , like all new things there will be an element of teething issues. Don’t let it put you off trying one decoder out as it really is good when it is set up. I am pretty sure Bachmann etc will follow suit with Bluetooth decoders in the next 12 months as they know Hornby have stollen a March on this one. Hornby are always going to look after their own first but there is a if market for them to tap in to other manufacturers locos and they will be well aware of this. I believe that there will be many upgrades and improvements to hm7000 and its decoders over the coming years and this is jut the beginning. If the money is not to much of an issue to over come (as I know it is for all of us at the moment) then it is definitely worth a go at testing this out. I will continue to use my NCE Cab no matter what as I like the dexterity of the controller, Bluetooth and the app is just a bonus. Things will continue to be developed so don’t worry it will get better.
@bulleidboy1
@bulleidboy1 Жыл бұрын
I'm running HM7000 through an iPhone and Hornby Elite - the whole system works fine - no problems at all. It's very early days in what looks like a brilliant system. Sam - it might be worth doing a bit more homework and reading the manual before making some of your comments.
Infuriating Lionel Army Hospital Train Set | Unboxing & Review
36:50
Hornby HM7000 Bluetooth Decoder Review | The Future of Digital Control?
30:57
Little Wicket Railway
Рет қаралды 19 М.
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 81 МЛН
THEY made a RAINBOW M&M 🤩😳 LeoNata family #shorts
00:49
LeoNata Family
Рет қаралды 43 МЛН
Little girl's dream of a giant teddy bear is about to come true #shorts
00:32
MP1 & MP5 POINT MOTORS fitted on Chadwick Model Railway | 188.
30:33
Chadwick Model Railway
Рет қаралды 85 М.
Every Component of a Switch Mode Power Supply Explained
23:10
ElectrArc240
Рет қаралды 181 М.
Control Trains With Your Smartphone | Hornby HM6000 | Review
31:31
Outstanding NEW Accurascale Class 55 "Deltic" | Unboxing & Review
40:05
Converting Locos to DCC at Chadwick Model Railway | 152.
34:13
Chadwick Model Railway
Рет қаралды 75 М.
Sam'sTrains Reacts To Mean Comments
30:16
Sam'sTrains
Рет қаралды 114 М.
Когда только что купил авто с пробегом 🤔😁
0:58
Суворкин Сергей
Рет қаралды 2,9 МЛН
🐷 на БМВ НЕ ОЖИДАЛИ ТАКОГО👊#shorts
0:59
Асфальта.нет
Рет қаралды 8 МЛН
New tfc sports car yellow colour kardya
0:27
Ruhul Shorts
Рет қаралды 4,3 МЛН
ride like a god... #bike #bikelover #biker #rider #motorcycle #india
0:10