Convincing Model Railroad Weathering

Convincing Model Railroad Weathering - HO Scale Tank Car

Рет қаралды 9,727

Күн бұрын

Hello Model Railroaders! Its time once again for the Ron's Trains N Things down and dirty weathering contest or DDWC2!!! I've let my viewers choose which car I will be weathering and entering in the contest! I will be weathering a Walthers Proto Tank car. I've never done a Tank Car before, so join me on this adventure and see how it turns out!
If this is your first time here please SUBSCRIBE to continue to see monthly videos about creating amazing prototype railroad models, and take your hobby to the next level.
Please comment on what you liked or did not like about the video! I really care about what you have to say and always enjoy feedback!
Connect with me on -
website: cnwmarshlinesub.com/
Instagram: / andy.dorsch
Facebook: / 969069293258141
Twitter: / 3putzdorsch
Thank you for watching!
Music:
Reveire: Quincas Moreia- Free to use courtesy of KZfaq
Leslie’s Strut: John Deley and the 41 Players - Free to use courtesy of KZfaq
Down N Dirty Weathering Contest 2
Hosted by Ron’s Trains N Things: / ronstrainsnthings
Sponsored by Midwest Model Railroad: www.midwestmodelrr.com
In cooperation with IMRROcom: / imrrocom
And JC’s Riptrack: / @jcsriptrack
See all the video entries in the DDWC2 at
• Down N Dirty Contest 2
For official rules and other information visit groups/downanddirtycontest or at www.midwestmodelrr.com.
Address all other inquiries to ronstrainsnthings@gmail.com

Пікірлер: 47

@j.sterling9167 3 жыл бұрын

I worked the Railroad, the cars we handled contained Clay slurry, it's used in the production of paper, this sloppy white goop ran down the middle sides by the ladders, it is dense and heavy. I wonder how much actually got inside. Man it's a sight to see as fully loaded, 5 or more loaded tanks coupled together, released during hump yard ops, can slam into and drive a line of cars way down the yard tracks.

@rimodeler7963 5 жыл бұрын

Hi Andy - Great job of weathering the tank car. Thanks for the tutorial. Mike

@AndyDorsch 5 жыл бұрын

Thanks Mike!

@georgen2793 5 жыл бұрын

Great video - thanks! Voted for your entry. Best one there.

@AndyDorsch 5 жыл бұрын

Outstanding! Thanks George!

@RonsTrainsNThings 5 жыл бұрын

Great video, Andy. Thanks for entering the DDWC2.

@AndyDorsch 5 жыл бұрын

You bet!!!

@CreativeRails 5 жыл бұрын

Beautiful work Andy!!

@AndyDorsch 5 жыл бұрын

Thanks!!!

@trainstramstrolleystravel7692 5 жыл бұрын

I liked the use of Titanium White Pan Pastel for fading. Ran out and bought some right away after I saw the video for the first time. This car is nicely done.

@AndyDorsch 5 жыл бұрын

Disclaimer: video not sponsored by Pan Pastel. LOL!!! I'm glad you like the technique! Thanks for commenting and tuning in!

@Crookedriverandeasternrr 3 жыл бұрын

Great work. Love the wet brush clay streaking

@AndyDorsch 3 жыл бұрын

Thanks! That was a fun model to weather up!

@Crookedriverandeasternrr 3 жыл бұрын

@@AndyDorsch it looked like it. It came out great

@JoeG-firehousewhiskey 5 жыл бұрын

wow great job, I like how you used the white powders to lighten it up. I think we have a winner!

@AndyDorsch 5 жыл бұрын

Thanks Joe! I've done this technique on some grain cars really gives a good effect! Thanks for watching!

@DruSteel69 5 жыл бұрын

Wow...looks really used well. Great job, Andy. Good luck. - Drew

@AndyDorsch 5 жыл бұрын

Thanks for watching Drew!

@DruSteel69 5 жыл бұрын

You’re welcome, Andy.

@SchuylkillRiverValley 5 жыл бұрын

Very well done Andy! That tank car looks great. Good luck in the contest. Best, John

@AndyDorsch 5 жыл бұрын

Thanks John!

@georgiasunbelt 5 жыл бұрын

Nice job Andy; surprised to see the one I voted for. I have few kaolin cars to weather, eventually 😊 and that same Englehard car. Now I have a technique to follow. Thanks. Anthony.

@AndyDorsch 5 жыл бұрын

Thanks for tuning in Anthony! I need to get a couple more of these! It was fun to do!

@IronHorseBrian 5 жыл бұрын

Very Impressive entry Andy! Nice all around!

@AndyDorsch 5 жыл бұрын

Thanks!

@MidwestModelRR 5 жыл бұрын

Nice work Andy. The car looks great and In my opinion you have one of the best produced vides of any entry!

@AndyDorsch 5 жыл бұрын

Thank you very much!!! And thanks for sponsoring the contest!!

@ralphgreenwood5857 5 жыл бұрын

Great Job Andy!

@AndyDorsch 5 жыл бұрын

Thanks Ralph!

@grahamgill8834 2 жыл бұрын

Did you moisten the weathering powders when you applied?

@AndyDorsch 2 жыл бұрын

No - Applied it dry then sealed it with a flat finish. Like dullcoat or a flat lacquer.

@sillywesties 5 жыл бұрын

Super weathering video....good luck in the contest!

@AndyDorsch 5 жыл бұрын

Thank you! Lots of good models in there this year!

@Indianarailproductions 2 жыл бұрын

I am watching this because I haven't started model railroading but will in 2022. I am 9 I'm surprised my parents are going to let me do this

@hastingsbnsfnscalemodeler8594 5 жыл бұрын

Excellent job, you made it look easy. Good luck with the contest...Anthony

@AndyDorsch 5 жыл бұрын

Thanks Anthony!

@bnsfnscale 5 жыл бұрын

very nice job Andy, realy like the technique ...Remco

@AndyDorsch 5 жыл бұрын

Thank you Remco!

@modelrailer 5 жыл бұрын

Great weathering dude!

@AndyDorsch 5 жыл бұрын

Thanks!

@Indianarailproductions 2 жыл бұрын

And other pro-

@CarminesRCTipsandTricks 4 жыл бұрын

Well done again!! I should have looked before asking for a Tank Weathering Video. 😳 I wish I knew about this contest... I'm subbed to Ron Marsh, but completely missed it. 😖 Carmine ✈🚂🚙

@CarminesRCTipsandTricks 4 жыл бұрын

I still haven't tried Pan Pastels. Just can't afford it at this time... But I look forward to trying it.

@AndyDorsch 4 жыл бұрын

Carmine - I've used cheap chalks and alcohol as "imitation pan pastels" ....you've given me an idea for my next video!!! Thank you!!!

@CarminesRCTipsandTricks 4 жыл бұрын

Cheap Chalks and Alcohol?? 😳 NEVER thought of that! I was going to try to figure out how to make Pan Pastels... I figured that Google HAD to give up the secret somewhere. 😉 I've been Weathering for a long time (35+ years),and the advice I often give newcomers is: ALWAYS keep an open mind. I'm almost 56, and I'm certain that I'm not done learning!! I'm looking forward to catching that Video when you do it. If I'm not Subbed yet, I'll go do that now! 😉 And if you also get a Sub from "PacbeltRR"... That's also me. It's a Channel I started for my Freelance Railroad, the Pacific Belt, since 1975! 😊 Don't have any Videos yet on it.... I haven't touched my Layout since 2015... Just couldn't afford to do ANYTHING. 💔😢 I've recently been re-inspired to get back and try to do something.... I'm a Disabled Veteran, and absolutely DON'T have the kind of money for what Model Railroading has become. 😖😞 It doesn't help that I'm insistent on DCC/Sound, and Keep-Alive in EVERYTHING..... Completely hooked after the first installation!!! DCC in 04, Sound in 07, and Keep-Alive in 11... NO POSSIBLE WAY I could go back! I ran an 0-4-0 Tank, through a #8 Turnout, at speed step TWO! It might have been better than my first kiss over 40 years ago!!! 😳 So absolutely NO, I can't afford it. But I'll try... I got some generous donations of equipment and in PayPal. I'm still blown away by the MRR Community!! I've got enough Track down to run a short Train or two. Just gotta convince myself that I can't just dive in like I used to... Sorry if all that was TMI... I've been watching Videos and getting excited! Carmine ✈🚂🚙