From the plumbing department of Home Depot, Lowe's or Ace Hardware...here are some very viable bullet lubes for cheap...
Пікірлер: 430
@tuberaider3 жыл бұрын
FortuneCookie45LC is like the Mr Rogers of reloading.
@FortuneCookie45LC3 жыл бұрын
tuberaider - I just did a mix of it - low heat in a 2 pound coffee can - mixed a toilet ring + 1/3 candle wax + glob of Lee Liquid Alox = pour into a silicone container = let cool bullet lub. Thanks for commenting - Steve
@tuberaider3 жыл бұрын
@@FortuneCookie45LC I would have never thought of it. Thanks for sharing.
@gman77gas3 жыл бұрын
You will create a toilet ring shortage now.....goes along with with the toilet paper shortage... 😄
@imhigh00133 жыл бұрын
Oh sh!t!!
@bobblenuts3 жыл бұрын
🧻🧻🚽🧻🧻
@FortuneCookie45LC3 жыл бұрын
Hey, Gary - You are a real riot..!! (Err...that's the good kind of riot, not the bad kind). Merry Christmas to you, Steve
@robertthomas59063 жыл бұрын
They make a rubberized gasket now. I opted for that on the last toilet seal I replaced. It's supposed to be supple for decades. Hopefully I'll never have to replace it again.
@alanwilliamson22593 жыл бұрын
@@FortuneCookie45LC May seem a silly question to you but after powdercoating my bullets do I need to lube with alox etc prior to putting through my Lee sizer? Thankyou for your informative videos !
@dthunter2506rem3 жыл бұрын
You have a way of conveying your interest and passion for the shooting you do! You have a simple layman way of talking we can all appreciate. I enjoy your videos.
@DenverLoveless3 жыл бұрын
Increasing that algorithm here, and a Merry Christmas to you too Steve. God Bless you and your family and God Bless America. Stop the steal!
@FortuneCookie45LC3 жыл бұрын
Amen bro, Steve
@davidkermes3933 жыл бұрын
I've been using toilet rings to lube my percussion revolver cylinders for years. I pack it into old musket cap tins. When people ask me what it is I tell them it's buffalo earwax and very hard to get.
@conservativemike37683 жыл бұрын
As a plumber, I can attest that simple toilet wax is a remarkably useful material.
@30roundclipazine793 жыл бұрын
I always heard that the ones reinforced with rubber the to leak and that the old plain wax are the way to go. Is this your experience?
@conservativemike37683 жыл бұрын
@@30roundclipazine79 / it depends entirely on the situation and skill of installer. More often than not, old installs are done poorly, the location/spacing between surfaces is incorrect, the flanges is broken or not properly secured, the sub floor flexes due to poor construction or water damage. Nothing is simple, the technique is subtle, and if done badly then water finds a way... Bottom line: amateurs are dangerous. One bad install can flood and destroy your house in 10 minutes, so just spend the money and get your work done right by a reputable, licensed, and insured plumber.
@30roundclipazine793 жыл бұрын
Good advice
@michael1842723 жыл бұрын
Second mortgage for the plumber..
@anthonybarkasysr50293 жыл бұрын
Now every time I pull the handle on my luber I'll always hear the toilet flush! Thanks LC Merry Christmas to you too 🚽🎄
@FortuneCookie45LC3 жыл бұрын
AB - That's hilarious beyond measure..!! Merry Christmas to you, Steve
@dowdawg3 жыл бұрын
That’s pretty stinkin good. Lol
@machinist72303 жыл бұрын
The toilet rings give a nice finish on stocks as well - I learned that from Mark Novak's youtube channel.
@flyingbeaver573 жыл бұрын
I wonder if that mix of waxes would be suitable for wax-potting electric guitar pickups? I bet it would melt at close to the same temperature, and if not, a little beeswax or a little paraffin wax added will "adjust" the melt point down or up.
@FortuneCookie45LC3 жыл бұрын
Machinist 72 - It's the petroleum wax reinforced with structural beeswax = apply to wood for protection = great idea..!! Plus, with the 90 cent version of this = economy and quantity = hared to beat, Thanks for posting this - Steve
@machinist72303 жыл бұрын
@@FortuneCookie45LC if you don't already watch Marks channel, you should - he has hands down the best smithing channel on the tube.
@tucobenedicto17803 жыл бұрын
Also, if you want to get free flux for your lead. Just take a plastic bag with you to Home Depot/Lowes. Go to the back of the store where they cut lumber for customers (at the saw table). There's usually sawdust all around and a broom to gather it up. Just help yourself.
@HomesteadOnThePreserve3 жыл бұрын
Learned this trick from my dad bout thirty years ago. Great to see you spread the word on this cool "hardware hack!" O yeah, and don't forget the OLD toilet bowl rings are made of PURE LEAD! Great having a plumber friend saving the old pipes and rings! Keep up the excellent work Mr. Cookie!
@untermench35022 жыл бұрын
I went through this exercise several years ago, and like you, I was tired of paying an exorbitant amount for the name brands and the formulations available on fleabay left much to be desired. I used to work for a wax supplier, so this was a pretty easy task. My mix is the basic 50/50 beeswax and petroleum wax, but instead of using a paraffin based petroleum wax, I use a 160 degree F. melting point Microcrystalline wax. This gives a lube that has a tacky feel and is fairly soft, so it can be applied by hand, yet has a melting point that prevents it from running in hot weather. It also will not affect powder in any way. I have used it in my Lyman bullet sizing press as well as pan lubing.
@richardlouden31783 жыл бұрын
Truly a versatile product crossing trades. As an apprentice cabinetmaker back in the 1960's I learned to keep a wax bowl ring on my bench to lube screws before insertion. Today's battery fired drill-drivers didn't exist back then and boy was that waxy ring a blister saver. I wonder what other trades have still other uses.
@RJ-sr5dv3 жыл бұрын
I’ve used a bar of soap for the same thing for 60 years
@bobconnor12103 жыл бұрын
Black powder revolver shooters, this also works VERY well for sealing your loaded chambers!! Will soon try on muzzle loader long gun rb patches.
@kevinbreckenridge67293 жыл бұрын
Any tips on that? Don't want to blow something up, finger, hand, gun........
@bobconnor12103 жыл бұрын
Kevin Breckenridge, find out what the safe maximum black powder load is and never go over it, I have a ruined brass framed Colt from over-loads. Also, never get distracted when loading. I under-loaded a cylinder once while yakking at the range and that led to a barrel obstruction and a barrel split from end to end. A '58 Remington 44 doesn't shoot very well with little or no powder.
@DickTickles3 жыл бұрын
Good idea. I've been paying $8 for a tube of Bore Butter for years. Next time I hit Lowes/HomeDepot I'll buy a ring and try this out on mine.
@direwolf77 Жыл бұрын
I read that using wax rings, that are made to seal toilets, are not good for use in your expensive BP rifles and revolvers. Supposedly the wax isn't pure bees wax. And that it has acids from other ingredients that are corrosive to the barrels of BP guns. Like I said it's something I read. Make of it what you will.
@anangryranger3 жыл бұрын
Been using beeswax and petroleum jelly [Vaseline] for well over 50 years. This ring is premixed. Very handy! Having to order the beeswax takes time, and cannot be found in stores. The wax ring is 7 mi away at the local hardware store. Much easier. Thanks for the tip!
@Chock_ful-o-nuts10 ай бұрын
Oatey rings are now made from Slack Wax (unrefined feed) and Microcrystalline Wax (refined feed). The combination works very well in my 1858 and 1873 black powder revolvers.
@joshpanter3 жыл бұрын
Happy Holiday FC43LC, thanks for the happy tip! Look, your videos have inspired me to explore bullet casting, and I'm really looking forward to it, thanks to you! My wife and I are new to the whole reloading thing, and we really appreciate your videos!
@FortuneCookie45LC3 жыл бұрын
josh panter - Thanks for posting...the interest in reloading and bullet casting is exploding...Good time to learn alll you want as reloading supplies and even bullet molds are in short supply. Lee Precision cannot make their molds fast enough to meet demand - the back orders are piled up to Mission Peak. Best to ya, and Merry Christmas to you and your wife, Steve
@jindlespog80453 жыл бұрын
That explains why Home Depot is suddenly out of toilet rings.
@billythekid91553 жыл бұрын
Nice to see you in front of the camera Fortune Cookie and The tour of your Christmas decorations was pleasant, too. Thanks for the tips and Merry Christmas!
@davidfrank28243 жыл бұрын
It's a great feeling to find something cheaper and does exactly what the more expensive item does. Every weekend when we would go out on our boat and spend the weekend on the water we would come back with a brown stain completely around the boat. By the way this is the Chesapeake Bay I'm speaking of. I was using this stuff that was almost $30 a bottle that you mixed up into a bucket of water. It really did not seem to work so I googled it. Come to find out if you go to the dollar store and buy toilet bowl cleaner you get a bottle that's about 10 to 12 oz and it's only a dollar. I bought one to test it and sure enough it works better than the name brand and only cost a dollar. We went back down there and cleaned the shelf out of the cleaner and hit the other dollar store a little further away and clean them out. That's one thing I like about the internet is people like yourself and others that share good information for everyone. Thank you for putting this video up. I hope you and your family have a wonderful Christmas and a Happy New year.
@christopheryuro58403 жыл бұрын
Been lubing Conicals with that for a few years. Works great. I even melted it down and brushed it into a pair of old leather hunting boots. They came back to life. Good stuff there!
@brianmcdaniel26933 жыл бұрын
Thank you for all you do for us. You are an amazing resource for new reloaders.
@altruisticscoundrel3 жыл бұрын
Another great tip! Thank you and stay warm!
@FortuneCookie45LC3 жыл бұрын
Hello to K M..!! And thanks for posting - I just made another batch to add to my bullet lubes... Merry Christmas, Steve
@altruisticscoundrel2 жыл бұрын
@@FortuneCookie45LC Belated Merry Christmas and Merry Early Christmas this year! Any updates on using the wax rings for lube? Works just like you hoped?
@ShawnHudgell3 жыл бұрын
I just discovered your channel. You are amazing. You are by far the best KZfaq channel I have visited in years. You must continue your videos. I have subscribed. Thank you.
@wisecitizenry28443 жыл бұрын
You are awesome Sir! Thank you for the video. From Folsom, CA Merry Christmas and a happy New Year to you and family.
@nacholibre19623 жыл бұрын
You can't go wrong with a little lube in your groove!
@Possumliving3 жыл бұрын
Great tip, Steve! Merry Christmas to you and yours.
@andymason7033 жыл бұрын
Great to see you again Merry Christmas.
@troy94773 жыл бұрын
Never knew that was the right kind of wax. Great tip. The stores are going to have to start stocking more of them. Merry Christmas to you and yours. Hope everyone is healthy and well.
@douglascushenbery17473 жыл бұрын
Best video on KZfaq! Very informative and thank you for posting it!
@jeffrobinson23583 жыл бұрын
Great info Mr. Fortune Cookie!!! Thanks for the useful tips! Enjoy watching your channel.
@kevinhoag42353 жыл бұрын
Merry Christmas!!🎄 Thank you for all the information...God Bless
@lawrencemaderia5913 жыл бұрын
Your home is beautull with the Christmas decorations, good tips on the lube for home depot.
@FortuneCookie45LC3 жыл бұрын
LM - Thanks, and I'm going to get 6 more wax rings myself as I just melted the ones in the video into bullet lube using 2 pound coffee can and low heat...Merry Christmas, Steve
@gregoryrandoll4497 Жыл бұрын
Been using toilet rings to run thru my sizers for 40 years. Good information in this video. For cast rifle & pistol bullets.
@Dominic.Minischetti3 жыл бұрын
Now that’s a great idea! Thanks for sharing!
@mausercal653 жыл бұрын
This is amazing , I’d never have thought about this 👍
@garymucher95903 жыл бұрын
A truly great find and video. Thank you sir, I do mold my own bullets and size and lube them... Thumbs Up!
@jimdent3513 жыл бұрын
Awesome tip on the use of toilette rings. All I need to do now is start bullet casing. You are a fountain of information sir!
@FortuneCookie45LC3 жыл бұрын
Hello to the Jim Dent..!! Bullet casting is one of the most stress relieving activities we can do...and the interest in this is exploding - Lee is cranking out molds as fast as they can make them and they are not keeping up with demand...backorders are up the Yin Yang...err, where's the Yin Yang?? Merry Christmas to ya, Steve
@jimdent3513 жыл бұрын
@@FortuneCookie45LC lol Merry Christmas to you too Steve.
@rancidpitts82433 жыл бұрын
I have wondered for years. Now I know. Thank you ever so much.
@kingduckford3 жыл бұрын
Haven't been staying up with your videos for a while, good to see you still making them! Happy Thanksgiving old man!
@luxordeathbed3 жыл бұрын
I like this guy. Finding things cheap and under cutting costs. Cheap lube making, wax for lubing. Yeah I dig this.
@chriss11503 жыл бұрын
Merry Christmas to all! Nice tip.
@texasrox20103 жыл бұрын
I like these vidyas. Cheap alternatives to overpriced store bought stuff. It's like if they know you need it for something important suddenly the price jumps three times.
@P1cannonman3 жыл бұрын
I can see they're gonna make great stocking stuffers this Christmas - especially for that special someone who doesn't have to fix a toilet! No matter what duration of lock-down is in effect, reloaders can always find something to do. ;-)
@FortuneCookie45LC3 жыл бұрын
P1cannonman - And the amazing thing is that many shooters don't know about the goodness of toilet seal ring wax for lubing cast bullets. It will make for some quizzical looks when they check out those stocking stuffers. But you can tell 'em that FortuneCookie45 had something to do with it ... I'm on my way to Home Depot to clean 'em out of the bare wax rings as we speak... Steve
@P1cannonman3 жыл бұрын
@@FortuneCookie45LC- You rascal! I drove like a bat out of hell in a rainstorm this afternoon just to get to the big box store before you. Thankfully, I apparently got there before you and picked up five stocking stuffers. I left the remaining 423 boxes for you! Great to meet another reloading zealot.... Mark
@barneygo20103 жыл бұрын
I don’t cast my own lead boooolits for my 45-70 and I still enjoyed watching and learning from this video. Warmest thanks! Peace Be To Journey!
@catherineharris47462 жыл бұрын
Outstanding as usual Sir!👍👍👍
@frankfarmlett38293 жыл бұрын
Thank you so much! I really appreciate this, and all your videos.
@BubbaRountreeOutdoors3 жыл бұрын
LOL! How bout that!! Great to see ya brother Steve... Hope y'all are well out there on the shaky side! Have a very merry Christmas my good friend! Wade
@ironbomb67533 жыл бұрын
Another great tip! Thanks FC
@jimdent3513 жыл бұрын
I left you a comment on this video when I watched it the first time, but I'm watching it again so I'll give you a Home Depot tip. You can buy Hoppe's No. 9 at H.D. too. At least here in Canada we can. It's sold here as an oil/cleaner for the concrete nail guns that use .22 cal. blanks to drive the nails. Merry Christmas Steve.
@butchyboy693 жыл бұрын
Thank you for a great idea. I like your videos. Happy reloading!
@michaelkaiser18643 жыл бұрын
I have official validation from none other than one of the guys who taught me casting and PC'ing! Played with this idea a year or so back lol. It works! I had suspected this. I found (after lots of hunting!) and MSDS on this stuff. I found it so close to Alox to be about indistinguishable. I still gotta find the right ratio for my 45/45/10. I use mineral spirits to help break it down. I did do the parrafin also. When its mixed, it takes a long time to set up and is still sorta sticky. On my 45 acp, this stuff flat works! Zero leading! Man. Testament to the Teacher! Thank you FC45LC!
@nicholascarver13 жыл бұрын
So good to see you FREN.
@2541968joey3 жыл бұрын
Thanks for another great tip Merry Christmas to you & your family.
@FortuneCookie45LC3 жыл бұрын
2541968joey - And a very Merry Christmas to you and yours, Steve
@hillbillydan4721 Жыл бұрын
I found a perfect deal as well at H/F...Fine walnut shell sandblasting media 25 lbs for $13.00 VS almost $30.00 for 10 lbs of fine walnut shell "tumbling" media (to clean your brass cases before reloading) exact same thing !!!
@kbjerke3 жыл бұрын
Thanks for the video! Subscribed. That is a really good source of beeswax, albeit not pure. Around here (Ontario Canada) we have honey farms all over the place, most of them even have a roadside stand, and they often have beeswax to sell by the pound. That's where I get mine, and five pounds for a couple of dollars lasts a LONG time!
@dowdawg3 жыл бұрын
That is brilliant, what a Christmas gift that is!!
@FortuneCookie45LC3 жыл бұрын
Hello to the dowdawg..!! And a very Merry Christmas to you, Steve
@320emerica3 жыл бұрын
Love the knowledge thank u for your reload vids happy holidays🤘
@RGD19823 жыл бұрын
Never thought about this I have a bunch of these thank you sir
@Thorsaxe7773 жыл бұрын
Good video Steve. we should all learn to make our own bullet lube. for those that tridiagonal lube bullets. my formula is 1/3 vaseline, one 1/3 paraffin wax, and 1/3 plumbing ring material. Just blend them in an old steel coffee can over low heat. it smokes a bit, however, it works great.-Dave
@FortuneCookie45LC3 жыл бұрын
Dave - AHA - the ThoreAxe Formula..!! I'd modify that by tossing in a tablespoon of Lee Liquid Alox. Gotta try that...a softer lube for colder climes...Merry Christmas, Steve
@otunca3 жыл бұрын
Have a great Holidays sir and be safe out there
@Beuwen_The_Dragon3 жыл бұрын
Well hot damn, looks like imma be taking a trip to the Hardware store in the morning. Thanke much for Sharing your find mate. ^.-.^
@FortuneCookie45LC3 жыл бұрын
BTD - Just made another batch to add to my ready bullet lube reserves...now to get 6 more of these rings...just found out from another poster that this toilet seal wax is great for applying to wood surfaces to add protection... Merry Christmas to you, Steve
@jacklowe37883 жыл бұрын
Great Tip! Merry Christmas & God Bless-
@ArcanusLibero3 жыл бұрын
Your lights look good. That is awesome thanks for sharing. I hope no one need a toilet seal in my area this week. Lol...
@davidthornton5953 жыл бұрын
Merry Christmas to you kind Sir from Dorset England
@FortuneCookie45LC3 жыл бұрын
David Thornton - Oh, my goodness..!! Right there on the channel opposite Normandy..!! A hop and skip from the White Cliffs of Dover..!! Pretty countryside you have there. Hello to ya David - and thanks so much for commenting. Best to ya, Steve
@gettingpast439115 күн бұрын
Was wondering about this and found your video thanks!
@sureshotandrew3 жыл бұрын
Thanks Steve, now I know what to do with my spare ring.
@montanaspring71763 жыл бұрын
the extra thick wax ring is to compensate for the increased height flooring such as tile etc.
@uncletom29623 жыл бұрын
Now that’s what I call a useful tip! Thanks a lot
@smokeytokyo45533 жыл бұрын
This has never even crossed my mind. Thank you fortune cookie
@FortuneCookie45LC3 жыл бұрын
AH - Works great...Just made another batch using my 2 pound coffee can wax melter over low heat and 1/3 mix of candle wax added...Best to ya, Steve
@tomlagatol44483 жыл бұрын
Good tip. Thanks FC45!
@zanedclark3 жыл бұрын
Great find! Thanks, a fellow .45 Colt lover.
@steve-ey3rx3 жыл бұрын
That's beautiful! You, sir, are a true CRB! :)
@historiclp457713 күн бұрын
So, on my vacation from work, I just ran out and bought a wax ring and it is absolutely perfect…thick and pliable and plugs and seals
@MarcMallary3 жыл бұрын
Some of the extra tall toilet rings have a foam or hollow core; at least they did when I fixed turlets for a living, back in the 90's.
@montanaspring71763 жыл бұрын
this information about the toilet rings is awesome
@mybuickskill69793 жыл бұрын
Merry Christmas old timer! Hope your Thanksgiving was awesome
@FortuneCookie45LC3 жыл бұрын
idmS -LOL, I beg your pardon, I'm getting on the old side, but I'm not an old timer yet...there's still a ways to go... But yes, thanks...and a Merry Christmas to you and yours, Steve
@mybuickskill69793 жыл бұрын
@@FortuneCookie45LC i rescend the offensive bits. It was meant as a reference to experience, not so much to age. 😇 time to hit the range 🎯
@stuckcase77753 жыл бұрын
Been using them mixed 50/50 with crisco. Works great
@sahmadi10002 жыл бұрын
Thank you as always.
@historiclp457713 күн бұрын
Awsome!! Very smart…i just got into black powder, and bought a couple little blocks of Beeswax, so that i can make lube.I just watched this video, and thought about, the times that I have replaced toilet bowl rings, and the consistency of them…Very smart awsome idea
@stinger45833 жыл бұрын
Good info, FC. I'll have to pick me up two or three of those. Who knew?
@zacmrochko4363 жыл бұрын
Great tip! Thanks for the great video. Shoot on!
@TUCOtheratt3 жыл бұрын
Great idea!
@johnc67383 жыл бұрын
Every sizing die I buy comes with liquid Alox. Was dreading having to order more lube when I run out. Plus someone made a comment about Black powder. I know where I'm going in the morning. Thanks guy.
@jungleno.2 ай бұрын
The Lee sizing dies no longer come with liquid alox.
@SamLFisher3 жыл бұрын
I have been using those rings for years. I just mix in some candle wax to change the color. Great for pistols.
@FortuneCookie45LC3 жыл бұрын
SF - Yes, indeed...and candle wax can often be scarfed up for free...Merry Christmas to you, Steve
@SamLFisher3 жыл бұрын
@@FortuneCookie45LC And a Merry Christmas to you as well.
@Saltpetere3 ай бұрын
The newer ones of these no longer have beeswax in them, they are all petroleum based "Slack wax". As long as your powder does not contain Sulfur this is still fine. Avoid using black powder with these.
@robinsvarrer42993 жыл бұрын
Thanks for some common sense info- guess I'll be guilty of hoarding toilet seal for awhile now 😁
@Redruffensore13 жыл бұрын
Great idea! Thank you.
@loaizacam19343 жыл бұрын
Great tip! Thank you.
@davmatt743 жыл бұрын
Great information. Thanks for the video.
@koolchem66533 жыл бұрын
Lol I figured you were in California, probably So Cal?...judging by the wind! Anyway, nice decorations and thank you for the great info.
@WastedTalent-3 жыл бұрын
Also works great for waxing bow strings when mixed with beeswax to harden a little..
@scottscheuerman61703 жыл бұрын
Good idea next time I get to a Home Depot or a plumbing store I get some I been wondering what to do for bullet lube being the gun store we use to have that carried it went out of business and the store we have now don’t seem to cater to casters
@taurushipointenthusiast13062 жыл бұрын
Well now you have me wondering about using the johnny ring as a patch lube!!! Should do same for wads/patches as bullets.
@ridecaptain13 жыл бұрын
Learned this trick years ago,but cudoes for sharing
@guysview3 жыл бұрын
I always like this guy. I love his videos.
@sixtofive3 жыл бұрын
Good find for a nice tip to save a little money!
@teammosin9999 Жыл бұрын
Great vide! Thank you!!
@tastiger913 жыл бұрын
We don't have them in my country, will have a look when I'm allowed to visit next time.
@Bulldog1676 Жыл бұрын
since watching this video a year ago ive been doing Fortune Cookies recipe. Works great on my 45-70 with a RCBS 45-500-BPS Bullet and 23 grains of 5744