Zippo Lighter Restoration & Making a Wooden Case for it 🔥

Рет қаралды 3,991,800

Күн бұрын

Zippo Lighter Restoration - Making a Wooden and Epoxy Lighter Case. In this video I restored an old Zippo lighter and made a case for this Zippo, out of wood and Epoxy resin.
This zippo lighter is quite old. I bought it for restoration from a person who found it with the metal detector on a beach. This zippo is made of brass and the sea water created a beautiful patina but if I had not restored it now, it would most likely have been destroyed in a short time.
The restoration of the zippo lighter was not difficult because I used original parts for repair. But after I finished restoring I thought of making a wooden and Epoxy resin case. I have never seen this project anywhere so I had to make my own plan. For the case I used curly Koa wood. I will leave you a link at the end of the description. It was quite difficult to mill the slot where the lighter had to go.
I tried in this restoration process to film the steps that I followed quite simply to understand by you, but if you have questions about the restoration, I am at your disposal in the comments category.
Also, during the restoration I used subtitles about the process and solutions used. If you notice grammatical errors, I apologize in advance. English is not my native language and I am doing my best to improve it.
I put a lot of passion and effort into this restoration. Although I was afraid of the results of the case, I am proud of how it came out and I really like it. I hope you like the restoration and the construction of that case.
That's all for this project, enjoy watching and I have to focus for the next restoration.
The following link belongs to the person from whom I got the wood. Is a seller on the Etsy platform, a serious seller who has quality wood at good prices : www.etsy.com/shop/YellowFinKn...
Cheers to all and stay safe during this times...
#zippo #zippolighter #zippolighterrestoration

Пікірлер: 2 500

@DeividasGedgaudas 2 жыл бұрын

Why do I feel that the Insert was changed to something new mid-sandblasting. The side pitting/being bent disappeared, as well as the insert is from January 2010, while the case is 1932-1989. 3:51 - Pitting visible, back side is bent inwards, 3:59 - Insert is swapped to a new one. Apart from that - end result is insane, as this was more of a wood/epoxy project, rather than a true restoration, that ain't much. Enjoyed the video still

@CoolAgainRestoration 2 жыл бұрын

I've already discussed this with others who have commented. due to the rust, the insert looked flat, and when the surface was sandblasted, the shapes began to show. the rust was not deep and the surface had no pits. Indeed, I removed the insert while blasting to better clean the inside with a small brush. then I straightened the board. I didn't show it in the video, because I would have made the video too long and it wasn't a very complex job. I've reviewed that part a few dozen times and you certainly have every reason to believe that the insert has been changed. but I assure you it was not so. Indeed, the insert is newer than the case, but that's how I bought the lighter. I bought it from a beach boy, most likely it was found on the beach near the Black Sea, Constanta, the city where I live. Cheers and glad you liked at the end 👍🏻

@DeividasGedgaudas 2 жыл бұрын

@@CoolAgainRestoration Thank you for such an indepth reply

@hardly_harlie 2 жыл бұрын

@@DeividasGedgaudas the insert may have been changed out by the same person who changed out the wick to a non-genuine wick. That would explain the date discrepancy.

@CoolAgainRestoration 2 жыл бұрын

It is possible 🤷🏻‍♂️

@lucabuzz2678 2 жыл бұрын

@@CoolAgainRestoration esti genial omule!

@beverlycollins4283 2 жыл бұрын

Excellent work. The case you made is beyond clever. However, I want to comment on how incredibly clean your work areas are as well as your hands and fingernails. For me it makes your videos more enjoyable because of the appearance of professionalism. Very nice.

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Collins! Glad you like what I do. Yes,I like to clean my workshop and to be clean myself. I think is OCD 😅 thanks a lot again and be safe 🤗

@serenity6415 2 жыл бұрын

I agree. I'm so detail-oriented, it's soothing to watch such fastidiousness and precision.

@trooper11c 2 жыл бұрын

Yes! It looks very neat and organized. Do you have a video showing your shop layout and all the machines you use?

@Sol-os5pk 2 жыл бұрын

Clean fingernails is honestly not very important.

@serenity6415 2 жыл бұрын

Not important maybe, but appreciated. I can't help but notice details, and, hands are one of my weaknesses so, it's nice when they're well-groomed. His hands are beautiful. I keep forgetting to watch the tools..

@beltfed4624 2 жыл бұрын

Although I'm not a smoker, I'd gladly add that to my display case of beautiful oddities. Incredible restoration, the end result is gorgeous! 👍🏻

@CoolAgainRestoration 2 жыл бұрын

Thanks a lot and glad you liked it 😊👍🏻

@ffturbo 2 жыл бұрын

I also dont smoke but have got 3 zippos. More like a hobby honestly. Small jobs and easy to maintain

@ReversedTech 2 жыл бұрын

I smoke and vape (mostly vape now but was fully a smoker) and have a nice white 2021 zippo :)

@nathanwhiting5475 2 жыл бұрын

I mean.. lighters do have quite a few uses other than lighting cigarettes lol.

@SampsfaN 2 жыл бұрын

Zippos are good for camping etc as well. I don't smoke but have a rolling stone lips one that I absolutely adore lol

@florianpeter7045 2 жыл бұрын

I like how you picked up the old rusty brown and blue cues for the new case

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it Florian 😊

@MagicMadBullet1985 6 ай бұрын

I love the way that at 6:29 the zippo logo is completely gone on the bottom of the case but you somehow "restored" it later

@idiotic_dude 2 ай бұрын

i hope you know thats the cap of the zippo case my man

@LifeOnHoth 2 ай бұрын

@@idiotic_dude :) Unless the cap is bigger than the bottom, the bottom of the case has no logo on it at this time stamp. Neither does the lid. The Zippo logo and related is gone under the bottom part of the case, and there is no "solid brass" on any of it either when it comes out of the glass beads. It most definitely looks like another case. However, just because the guy has chosen to use another case doesn't make the video less interesting. The case may have been restored, but not for this lighter. :)

@nah9080 2 жыл бұрын

I really appreciate that it's kept in its original brass case and just given a new added look with the beautiful wood-resin bit. At least if you want to go back to beautiful, shiny brass, you just have to gingerly take jt out.

@CoolAgainRestoration 2 жыл бұрын

True. That was the idea from the first. But for this reason I was afraid to make a case because I didn’t knew how will be the results. My luck that I made the case perfectly fitting for the lighter. Not too big,not to small. Like you said,you can take out when you want 🤩

@sophiav4962 2 жыл бұрын

That looks so good, I’m a sucker for wood and resin things.

@CoolAgainRestoration 2 жыл бұрын

I like the outcome too 😍 thanks Sophia 😊

@chrisclark2138 2 жыл бұрын

Wow, incredible. the time and patience going into this is nothing short of phenomenal. Great content!

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Chris

@VietQuoc86 5 ай бұрын

Mmp

@robertovillagran5364 2 жыл бұрын

I read a comment of yours saying that you spent almost a month on this restoration, it absolutely shows! What an incredible job, an incredible video. All of the camerawork, all of the set up, your craft and care are some of the finest I’ve ever seen on KZfaq! Your video feels intimate, yet no music, no voice, simply you and your project. This video was phenomenal, thank you very much for allowing us to see an artist at work. I was captivated from beginning to end, thank you!

@CoolAgainRestoration 2 жыл бұрын

Glad to read these kind words and glad you liked it Roberto 😊🤗 cheers

@bloodrayne2645 2 жыл бұрын

One of the most creative Zippo lighters I've ever seen, looks so beautiful Good job brother 👌

@CoolAgainRestoration 2 жыл бұрын

Thank you very much bro 😎

@cielo_ciel_ Жыл бұрын

I especially appreciate that the wood resin housing somewhat resembles the natural brass oxidisation colours, as I find the texture and pattern of the exterior of the zippo pre restoration very charming.

@venkatanarasimhamkadambari242 2 жыл бұрын

Indeed a Brilliant Work and Personal Commitment and Passion Personified

@CoolAgainRestoration 2 жыл бұрын

Thank you very much 😊

@thomasneal9291 2 жыл бұрын

Well done restoration. not too much metal loss, re-added nickel plating, properly buffed. even got a proper specific restoration kit. you've reached pinnacle restoration skill. go on and teach!

@CoolAgainRestoration 2 жыл бұрын

😅😅 thanks man. What is pinnacle skills?

@pthsawas 2 жыл бұрын

@@CoolAgainRestoration pinnacle means peak/ the top. Basically he means you are amazing at what you do. Sorry for the late reply.

@CoolAgainRestoration 2 жыл бұрын

Oh, thank you very much Orieller 😊 now I understand what he wanted to say 👌

@James_Edward59 2 жыл бұрын

I love when things stay all original like how you used all original or oem Zippo parts when replacing them. That was a great restore!

@CoolAgainRestoration 2 жыл бұрын

Thank you very much James 😊glad you liked it

@KaleOrton 7 күн бұрын

Glass bead lapidary is awesome! I've never come across that before. Thank you! 👍

@JoshD4PREZ 2 жыл бұрын

Absolutely brilliant, glad this popped up in recommended videos and I got to discover your channel. I’m impressed with everything especially the case, what an awesome restoration 👍👍

@CoolAgainRestoration 2 жыл бұрын

Thank you very much and glad you liked it 😊👍🏻

@JU7DE357 Жыл бұрын

No its FAKE

@R3belliousKn1ght Жыл бұрын

@@JU7DE357 no u

@radiantfalinks1981 2 жыл бұрын

beautiful! it’s clear that you put a lot of care into your restorations ❤️

@CoolAgainRestoration 2 жыл бұрын

I try my best every time 😇

@Rev-D1963 2 жыл бұрын

The restoration was superb, and the wood/resin case is amazing! Fantastic job on the restoration and case build, a pleasure to watch. Thanks so much for sharing this with us. Be well, stay safe and God bless. Rev. D.

@CoolAgainRestoration 2 жыл бұрын

Thank you very much my friend and I really appreciate your support every time 😊 stay safe you too

@PieceOfGraffiti 2 жыл бұрын

Many many working hours to restore something you can buy from a market but you restore it because you can, huge respect!

@CoolAgainRestoration 2 жыл бұрын

Thank you very much 😊

@yamasail 2 жыл бұрын

That old case was beautiful. I don't know if I could've brought myself to restore it and probably would've ended up just doing the insert.

@syilandel Жыл бұрын

same here, I would have tried everything to keep the old case intact it was so unique.

@CoolAgainRestoration Жыл бұрын

Too many people said that. If I will find another zippo like that, I will seal the patina . This is an idea for the next project 😊

@randysmith3828 2 жыл бұрын

That turned out incredible!!! Nice job on the wood and resin case, that is an awesome look. Can’t wait to see the next one.

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it Randy 😊 I try my best every time 😇

@neetzduts 2 жыл бұрын

This man's work, effort and craftsmanship never ceases to amaze me.

@CoolAgainRestoration 2 жыл бұрын

Glad to hear that Justin 😎🤗

@stacbond3362 10 ай бұрын

Спасибо автору видео за хорошую работу,люблю когда востанавливают старые вещи,вторая жизнь для зажигалки Zippo

@KaleOrton 7 күн бұрын

Immaculately professional. 👍

@ainttoosara 4 ай бұрын

i love how the cover you made for it mimicked the colouring of the original patina, and ode to what once was!

@CoolAgainRestoration 4 ай бұрын

Thanks a lot and glad you understood the project 👍

@kotadawndragon 2 жыл бұрын

This turned out beautifully! I love the wood and resin case on it. I'm glad you chose to add some blue back to it, since parts of the patina on the brass were a lovely color.

@CoolAgainRestoration 2 жыл бұрын

Thanks a lot Kota and glad you liked it so much 😊🤗

@eraj1001 2 жыл бұрын

Amazing job! I’ve collected and restored many zippo’s since I was 14 years old but never with the skill and attention to detail you showcased. Do you work for a museum or did you buy all these tools yourself?

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it eraj 😊 I buy them for myself

@vodum_music Жыл бұрын

Wood and fire. Genius!

@maria.luisa.garcia2169 2 жыл бұрын

OMG ! Un estuche para la fosforera ! Que bonita ! ❤

@BuddWolf 2 жыл бұрын

Fantastic job!❤️ I collect Zippo lighters, so this is special to me. Thanks for the video post and best of luck to you and your family 🍀❤️

@CoolAgainRestoration 2 жыл бұрын

Thank you very much for the wishes 🤗🤗 be safe you too and your family

@The42Joker 2 жыл бұрын

Great work! I thought I was going to hate it with the wood and epoxy case because the brass looked so wonderful. My mind was changed, and I loved the outcome!

@CoolAgainRestoration 2 жыл бұрын

Glad to hear that man. I was afraid how people will interact with this outcome ..because is different and people never seen that before

@JG-fi9ub 2 жыл бұрын

Really love zippo lighters. That brass case was in amazing condition for its age after you cleaned it up. Good call on adding the wood case since the brass zippos really tarnish fast. Very nice job.

@bingefreak1 4 ай бұрын

That was satisfying to watch, right up there with the finest time piece restorations

@CoolAgainRestoration 4 ай бұрын

Thanks a lot and glad you enjoyed so much 😊

@kirilla.3529 2 жыл бұрын

Really impressed by your job, I've seen many of zippo restorations, but yours just so satisfying. Thanks a lot 🔥

@CoolAgainRestoration 2 жыл бұрын

Thanks a lot too Kirill and glad you liked it . Hope many peoples find this the best zippo restoration 😅👍🏻

@RestoredChannel 2 жыл бұрын

Wow. You really took this to a new level! Wonderful restoration and I really like how you made the case👌

@CoolAgainRestoration 2 жыл бұрын

Thanks a lot my Swedish friend 👍🏻

@mohamedraaifrushdhy6693 2 жыл бұрын

It is truly living again thanks to you...

@Nosttromo Жыл бұрын

What a great idea to make a flammable material case for a flame producer device

@HandsonRestoring 2 жыл бұрын

Really nice job and great idea with the case ! Great filming and editing too. Thanks for sharing !

@CoolAgainRestoration 2 жыл бұрын

Thanks man 👍🏻

@CourtneyClark01 2 жыл бұрын

That is gorgeous. I love wood and resin projects! The lighter is beautiful on its own, but the case offers protection and another level of beauty.

@CoolAgainRestoration 2 жыл бұрын

Thanks Clark and glad you liked it 😊

@PapaKratos 2 жыл бұрын

I have no idea why this was so satisfying to watch. Can't believe I went through the whole video with 0 skips. Good job man!!

@CoolAgainRestoration 2 жыл бұрын

Thank you very much man 😊

@jackhenryhottinger6011 2 жыл бұрын

This is truly amazing, and wow so clean so crisp even your tools and workspace, honestly impressed with the amount of skill you have

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Jack 😊

@tyson145 2 жыл бұрын

I love people like you who take something that would otherwise be considered trash, and bring it back to life! we live in such a throw away society. It's sad. Keep on making these amazing videos! :D

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it Tyson 😊 thank you very much

@JU7DE357 Жыл бұрын

Its FAKE as hell dont belive it

@marianavasile1387 2 жыл бұрын

The restoration was pretty nice but the process of making that case was awesome😍😍😍 never seen something like that before 🤩 congrats my dear 😘😘

@trietvo8728 2 ай бұрын

❤❤, đúng chất phiên bản zippo đầu tiên nhà sản xuất dùng bông gòn để làm môi lửa 😅

@x_CrossHair_x 11 ай бұрын

Yup Cool Again for sure. Your skills / Tools and knowledge are amazing.

@CoolAgainRestoration 11 ай бұрын

Thanks a lot mate 😊

@lovejcdc 2 жыл бұрын

That was freakin awesome! My late father was a long time collector of zippo lighters. I think he would have really liked it. Great job

@CoolAgainRestoration 2 жыл бұрын

Glad to hear that man and thank you very much 😊

@geoffcraggs1596 2 жыл бұрын

Mate, that's some of the best photography, particularly your close ups, that I've seen on You Tube. Well done.

@CoolAgainRestoration 2 жыл бұрын

Thanks Geoff 😊 glad you liked it

@garywimer2071 Жыл бұрын

I can not believe how awesome this turned out! Thanks again

@CoolAgainRestoration Жыл бұрын

Glad you liked it Gary 👍

@LKS-1976 2 жыл бұрын

Holy mackerel, it's gorgeous!

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it Doc 😊

@serenity6415 2 жыл бұрын

Excellent quality job! You definitely belong among the KZfaq masters. I really enjoy your editing style as well. It's a pace and format that I find very agreeable and engaging. Efficient. I have problems concentrating lately but I'm just rolling right along with it. Smoooooooth. (LOL! That's the first time I've seen a restorer swear. Extra points for that. Too funny.)

@CoolAgainRestoration 2 жыл бұрын

Glad to read this kind words 🤗 thank you very much for your support Tina 😊

@MrSongbird 2 жыл бұрын

How do you decide what needs sandblasting and what goes in the cyclone? Awesome restoration, by the way. The case looks sick, but I think I prefer the lighter as is ;)

@CoolAgainRestoration 2 жыл бұрын

That’s why I made the case perfectly fitting. The lighter can be take out easily and wear like a normal lighter. I thought that the air pressure will hit the brass case and will damage the material. That’s how I decided to use the cyclone 👍🏻

@tiberiubear6282 2 жыл бұрын

@@CoolAgainRestoration i always thought its that situation where "if it fits, it goes in the little tumbler", just because working with the sandblaster on small materials can be tiresome and not very comfortable

@watchboxer 6 ай бұрын

Antique lighters can be collected as cultural relics👍

@bambam144 2 жыл бұрын

just WOW! again many thx for sharing.

@CoolAgainRestoration 2 жыл бұрын

Thanks again 😊

@NapierNimbus 2 жыл бұрын

Very impressive work, lighter restoration and making the case. Am split between wanting to see and admire the lovely restored lighter or keeping it in the case, think a display rota system required 🙂 Having the right tools helps so much, & I hope you can find a use for the Zippo restoration tools on other projects.

@CoolAgainRestoration 2 жыл бұрын

Thank you very much man! That’s why I made the case perfectly fitting. If someone want the lighter as normal ,he can take out from the case very easily 😎

@tijnmens7389 2 жыл бұрын

Absolutely killed it!

@CoolAgainRestoration 2 жыл бұрын

Thanks 😊

@Gunhoo_R 8 ай бұрын

Excellent !! I envy your talent.

@SexyEngineerOffical 2 жыл бұрын

5:21 THE LEAN

@CoolAgainRestoration 2 жыл бұрын

I will reply to all messages as usual. If you have questions about this restoration or opinions, feel free to write in the comments. Enjoy the video ,Thanks and Cheers !!

@AlvaroLucard 2 жыл бұрын

My friend, David, the restoration and customization has always been beautiful. Do you often restore many ZIPPO? New equipment? A big hug. 🍻🍻🍻

@amoichipmunk 2 жыл бұрын

Is there anything you cannot transform into art? seriously about me because you are good beyond measure, Wood Metal Electronics, I bow. why in wood and resin the case?

@rickb3225 2 жыл бұрын

Threw in a little F bomb there 🤭😁! Great work 👍! I'm restoring a bar top for my sister in law and she wants me to make a mosaic with bottle caps and corks, and then cover it with epoxy resin. Only issue is I've never worked with epoxy resin before 😬 and I'm extremely nervous about screwing it up! Any tips?

@restaurandocoisasvelhas 2 жыл бұрын

Very good friend. Hugs from Brazil.

@CoolAgainRestoration 2 жыл бұрын

Hi Rick ! You should check the thickness for the casting resin. For example mines,you can turn only 10 mm layer. After some tutorials video on KZfaq, I bet you will become a pro. Is nothing too hard when working with resin. Just be careful with the bubbles. When mix the resin,you need to vacuum the air from epoxy

@hotbread1004 Жыл бұрын

The case is gorgeous, personally I like the color of brass when it's polished, gives a gold feeling, which is my favorite color

@dennisgannon Жыл бұрын

This is the smartest Zippo repair I have ever seen. He used the Zippo repair products, that was smart. No one else on KZfaq has done that, (at least the dozens I have viewed).

@CoolAgainRestoration Жыл бұрын

Thank you very much Dennis and glad you liked it so much 😊

@TheFabrik 2 жыл бұрын

Amazing job 🙌 So pleasant to watch, the editing, the outcome, everything’s perfect. Now I will watch all your videos !! 😃

@CoolAgainRestoration 2 жыл бұрын

Thank you very much my french friend. I already watched all your videos 😎

@ALPHASASYLUM 2 жыл бұрын

Excellent restoration and the case is awesome Where did you purchase the repair kit at, I am not finding it online.

@GrandpaKrakr 2 жыл бұрын

Ditto

@CoolAgainRestoration 2 жыл бұрын

Thank you very much man. From EBay ,search there 👍🏻 “zippo repair kit”

@ALPHASASYLUM 2 жыл бұрын

@@CoolAgainRestoration You are welcome and thank you for replying. Will check that.

@alexandersteinhardt1387 2 жыл бұрын

That was amazing to say the least.

@lindafromcanada7400 Жыл бұрын

Absolutely beautiful!

@CoolAgainRestoration Жыл бұрын

Thank you very much Linda 😊

@AmmonomiC4T Жыл бұрын

Six from little nightmares bought her lighter from zippo😂😂

@sucio- 2 жыл бұрын

This is like saying i used 20,000 dollars worth of equipment to buy groceries… i mean i guess technically i did but did I really?

@FranciscoSanchez-wq1oq 2 жыл бұрын

Pretty fricking amazing keep on keeping on!♥️

@sanjaydey3903 4 ай бұрын

Just FANTASTIC !!

@CoolAgainRestoration 4 ай бұрын

Thanks a lot 😊

@SturleyArt Жыл бұрын

Such a beautiful project. I love the wood and epoxy case. I also like how you follow the wick laying instructions to get the best results. Sometimes things need to be done a certain way to get the best results and it's great you followed that.

@CoolAgainRestoration Жыл бұрын

Glad YOU seen that 🙋‍♂️😍😊

@theplacesigo4169 2 жыл бұрын

Wow. I was pretty much captivated by how cool this whole project was

@CoolAgainRestoration 2 жыл бұрын

Thanks and glad you liked it 😊

@codysmith4611 2 жыл бұрын

I was so happy when he said he was going to do more with this project and started the case

@witzevds1001 2 жыл бұрын

Crazy how you respond to everyone this deserves a sub and how patient and clean you are, keep up the good work!!!

@CoolAgainRestoration 2 жыл бұрын

Thank you very much man 😊

@mph3394 2 жыл бұрын

From Montreal Quebec THANX !!! Love yer videos with all the ASMR and all yer knowledge

@CoolAgainRestoration 2 жыл бұрын

Thanks and glad you liked it 😊

@StayPuft80 2 жыл бұрын

That is literally amazing

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Lee 😊

@Dr.Trustmeonthisone 2 жыл бұрын

Simply incredible

@CoolAgainRestoration 2 жыл бұрын

Thank you very much 😊

@fielgomezvlogs922 2 жыл бұрын

Love how much effort he puts in his restorations love it very much

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Fiel 😊

@darrellmurdock6880 7 ай бұрын

That Oddity oil made it really pop out 👍😎 nice casing and restoration piece

@CoolAgainRestoration 7 ай бұрын

Thanks a lot and glad you like it 😊

@nootthegoose5455 Жыл бұрын

I find it amazing that you can turn that into something that looks like it was just made

@funtoytoyschannel5676 2 жыл бұрын

Absolutely brilliant, glad this popped up in recommended videos

@CoolAgainRestoration 2 жыл бұрын

Thanks buddy

@HowToRestoration Жыл бұрын

So nice bro thank you

@alexglaras5090 Жыл бұрын

The patina on the shell was so beautiful I would've hesitated to restore it. Great job!

@CoolAgainRestoration Жыл бұрын

Thanks Alex 😊

@mrtmilf 2 жыл бұрын

Wooden case for the lighter. Fantastic

@danielaragall9780 Жыл бұрын

I have a zippo of the 50s and i love it, i dont smoke, the zippo was of the unckle of my grandpa, but now i know they took much better care

@juancosta775 2 жыл бұрын

Very aesthetically pleasing, and good job for you reading comments and responding!

@CoolAgainRestoration 2 жыл бұрын

Thanks Juan 😊

@United_HVAC_and_Fans 2 жыл бұрын

This my friends, is absolute CRAFTSMANSHIP! Something that american companies should still be doing.

@CoolAgainRestoration 2 жыл бұрын

Thank you very much my friend 😊 yeah,I agree 😀

@Pyxe_ZA Жыл бұрын

That's a nifty Zippo repair kit. Well worth your investment I'd say

@CoolAgainRestoration Жыл бұрын

100% worth 😎

@gordhildreth4630 Жыл бұрын

I don't smoke but to use this beautifully restored lighter, I MIGHT START!

@CoolAgainRestoration Жыл бұрын

Glad you liked it mate 😊

@shakimjohsnon3497 2 жыл бұрын

That sand blasting was so satisfying to watch!

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it 👍🏻

@shakimjohsnon3497 2 жыл бұрын

@@CoolAgainRestoration Hell yeah man! Got a sub from me! This shits awesome!

@PushTheLimitsHCR3 2 жыл бұрын

lets just appreciate how this guy went back in time to show us how the lighter used to look

@gabsfelinex 5 ай бұрын

You’re on a whole other level! 😍

@CoolAgainRestoration 5 ай бұрын

Thanks for that 😊

@spoogle621 2 жыл бұрын

You have an amazing workshop.

@CoolAgainRestoration 2 жыл бұрын

Thank you very much

@SkeeterMC 2 жыл бұрын

Looks soo good! God bless!

@CoolAgainRestoration 2 жыл бұрын

Thanks Joel 😊

@Whitebrowpriest Жыл бұрын

Your work is second to none. Superb job!

@CoolAgainRestoration Жыл бұрын

Thanks again 😊

@timesch6355 Жыл бұрын

this is my favorite one you have done so far great work

@CoolAgainRestoration Жыл бұрын

Thanks again Tim 😊

@gegeeng1226 Жыл бұрын

Alors là c’est du grand art ! Bravo

@CoolAgainRestoration Жыл бұрын

Merci Gege 🙏

@iainduncan2363 2 жыл бұрын

absolutly amazing job take a bow sir

@CoolAgainRestoration 2 жыл бұрын

Glad you liked it Iain 😊 thanks

Жыл бұрын

I love this Job

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked it Hasim 😊

@SnaggleWumpus 2 жыл бұрын

I've never seen or done anything like this in my life but I watched this whole thing and thoroughly enjoyed every second of it

@CoolAgainRestoration 2 жыл бұрын

Thank you very much John 😊

@gilmtz1101 2 жыл бұрын

… A true artist. ¡Bravo! 👏🏼👏🏼👏🏼

@CoolAgainRestoration 2 жыл бұрын

Thank you very much Gil

@sirhawkjames 2 жыл бұрын

Incredible to watch

@CoolAgainRestoration 2 жыл бұрын

Thanks James 😊