Neglected Wilton Vice Restoration

Рет қаралды 611,601

Жыл бұрын

This video is about restoring an old Wilton Mechanics vise. My best restoration video with amazing techniques of restoration. Enjoy the video !
More about the vise :
I won this vise at an Ebay auction. The seller claimed it was from 1964, so I did my best to win the auction. I thought it was quite a valuable piece and I thought that will be a nice restoration , so I paid $380 plus another $400 shipping and taxes from United States to my place. In the end it was just a beautiful restoration because the vise is not what I thought. During disassembly, I removed the keychain, where the year of manufacture is usually stamped, and that's how I found out that this vise was made in 1989.
This only matters in the evaluation of the price, because in the end it will still be an antique piece with a high value. In general, vices are the most abused tools and often end up as scrap metal. That's why there are so few Wilton vices on the antique markets and they have very high prices. I don't care that it cost an extraordinary amount, having a Wilton vise in the workshop is a fulfillment. After the restoration, my big dilemma is whether to use it or keep it in good condition, because it has a beautiful outcome.
More about the restoration :
I started the restoration by disassembling the vise , after that I cleaned all the parts that has grease on it. I restored all the parts that were in almost good condition. I nickel plated most of them and I choose brushed finishing . I made some metal works to the main parts and I powder coating them in green hammertone. First time when I used this colour and I was amazed with the outcome. I made new handles because they were needed or were missing. I had to make a new jaw pipe because were missing too. The jaws of the vise could have been kept and restored but I'm not a fan of the rough surface so I made other jaws with flat surface. Here needed to show how I hardened them.
I think you have what to see in this video, it may be one of my most complex restoration video, with many techniques, presented very well in the video.
I hope you will enjoy the video and the restoration as much as I enjoyed working on this beautiful Wilton vise. Cheers and stay safe until next time !
#wiltonvise #viserestoration #wiltonviserestoration

Пікірлер: 1 400

@mymechanics Жыл бұрын

Better and much more beautiful than new!! Good job

@smith507 Жыл бұрын

You know you did a good job when you have the "my mechanics" seal of approval.

@CoolAgainRestoration Жыл бұрын

Yeah, that is true. He make my day when comment on my video 😊

@CoolAgainRestoration Жыл бұрын

@my mechanics thank you very much. I wait your video to came out. Cheers mate 🍻

@strengthsleuth Жыл бұрын

This crossover would be more ambitious than the Avengers!

@TinaMdot Жыл бұрын

I came here to say "your work reminds me of my mechanics, and that is the highest praise I know"

@TC-gv3qh Жыл бұрын

In our fast paced world these video’s are extremely relaxing to me. I’m sitting at the kitchen bar, drinking coffee and watching mesmerizing machinery create beauty!

@CoolAgainRestoration Жыл бұрын

Thanks a lot TC and glad you enjoy my video. I know what means drinking a coffee. That time is precious and need to be spent well. Thanks for this opportunity 👍 cheers

@jesusalbertohermandez2174 Жыл бұрын

ETas

@KoldoGarcia 10 ай бұрын

Me too

@antoniodejesuslebolodelave4824 8 ай бұрын

Muy bonita la restauración pero faltó el moleteado

@machooke4846 6 ай бұрын

Idk why but this one is particularly satisfying. The hammered green powdercoat is especially great.

@CoolAgainRestoration 6 ай бұрын

Thanks and glad you enjoyed 😊

@svipace8220 Жыл бұрын

Sanding, milling, chamfering, straighthening, neutralizing, hardening, tempering, filing, cutting, painting, hot bluing, nickel plating, re-engraving... MAAAN ! How many techniques did you appy!? This is beyond perfect! Thank you so much.

@CoolAgainRestoration Жыл бұрын

Trust me, it is hard to do all of them but in this case, the vise needed all of them 😎😀

@CoolAgainRestoration Жыл бұрын

I hope you like this restoration as much as I liked working on it. If you have questions, comment them and I will answer you as soon as possible. Cheers and stay safe until next time !!!

@dragogranic8171 Жыл бұрын

You are amazing. Your workmanship is on another level.

@fish2much12 Жыл бұрын

You are awesome at what you do! Do you sell you finished products? If so how much for this vise?

@CoolAgainRestoration Жыл бұрын

Thanks guys! Unfortunately is not for sale yet. To have a Wilton vise in the workshop is a thing. Not I have a dilemma, to use or not to use 😅

@AlvaroLucard Жыл бұрын

As always, the restoration was excellent, David. A big hug friend. Looking forward to the next one. ☕☕

@CoolAgainRestoration Жыл бұрын

Thank you very much Alvaro 😊

@viosmith Жыл бұрын

Who else finds it so incredibly relaxing to watch sandblasting? Thank you for your great work 🖤

@CoolAgainRestoration Жыл бұрын

Thank you very much Vio and glad you liked it 😊

@vincejamison2962 Жыл бұрын

My grandpa told me long time ago. Every man needs a good vise. That's nice

@CoolAgainRestoration Жыл бұрын

Thanks a lot Vince 😊

@SW99836 7 ай бұрын

I was going through pennies while watching this, and found a 1919 wheat cent in nice shape

@giorgiogiuseppecarbone6244 Жыл бұрын

In one of your first video i told you that Your way of restoration would have taken you to the levels of my mechanics. Glad to see that I was not mistaken

@CoolAgainRestoration Жыл бұрын

Thanks for your support and confidence 😊

@sarahnichols9583 Жыл бұрын

The thing I love about these videos is that the sheer artistry in restoring the item, and fabricating missing parts is so mesmerizing that I find myself watching and loving videos like this. Before, if you were to ask me, "Would you like to watch 20 minutes of someone restoring a vice" I would have said no thanks, but having seen this I have found that it doesn't matter what is being restored, it is still completely satisfying to watch.

@CoolAgainRestoration Жыл бұрын

And thank you very much for this Sarah! You are so kind and thanks for understanding me about the f bomb in the other video 😇

@mateuszsarnocinski5161 Жыл бұрын

This red grease here is a blessing. Preventing more rust and stuck.

@dingsbums1627 Ай бұрын

It looks like a brandnew vise. Perfect!

@CoolAgainRestoration Ай бұрын

Thanks a lot 😊

@raywood8187 Жыл бұрын

So much attention to detail and taking pride in your work really makes the difference in making just a common tool into something beautiful. And I loved the bug eyed ducky squeeze test!

@CoolAgainRestoration Жыл бұрын

Thank you very much Ray and glad you liked it so much 😊 cheers mate

@superdrinkerb6432 7 ай бұрын

Never expected to that kind of test 🤣🤣🤣🤣

@shedmanx3640 Жыл бұрын

Absolutely sterling work with infinite attention to detail. That vice is magnificent and better than when first produced.

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊 glad you liked it

@jamescraig5421 Жыл бұрын

Good for another 50years keep up the great work and keep showing your work Bro. Ten out of ten.👏🏻👌👌👌

@d__dunbar9123 Жыл бұрын

You, and My Mechanics are the 2 BEST restoration channels on KZfaq!! PERIOD!!!!

@CoolAgainRestoration Жыл бұрын

Oh, you are so kind! Thanks for that 😊

@amandamcmurray7106 Жыл бұрын

I haven’t been on in a while, and had forgotten how good you actually are. This is a thing of beauty. I love it

@CoolAgainRestoration Жыл бұрын

Thank you very much Amanda . Stay safe 😊

@kevinhennessy8533 Жыл бұрын

That is by far the most beautiful vise I have ever seen. Fantastic job!

@CoolAgainRestoration Жыл бұрын

Thank you very much Kevin! Yeah, I saw so many vise restored too but no one like mine. I like that I kept the casting marks and the transitions between colour and bare metal came out perfectly. I’m proud of this job. I think is my best and complex video 😎

@kellyskinner101 6 ай бұрын

I like seeing your talents at work. I had to watch this again 🎉

@CoolAgainRestoration 6 ай бұрын

Thank you very much Kelly for your support 😊 wish you all the best

@Willpower-74205 Жыл бұрын

Watching your restoration videos is MY new "vise." 😁

@CoolAgainRestoration Жыл бұрын

😅😅 weird how these 2 words can have 2 signification

@PiggySage Жыл бұрын

Great restoration! You did this vice a great justice.

@CoolAgainRestoration Жыл бұрын

Thanks Aaron and glad you liked it 😊

@Oleo2320 Жыл бұрын

Since the vice was not in “terrible” before condition, I thought the restoration was going to be a bit underwhelming, I stand corrected. What a great transformation! I would love to have that vice in my shop (or one like it) oh and thanks for not adding dirt and fake rust in an attempt to make it appear more dramatic, which I’ve started to notice in other cheeper restoration vids. Enjoyed your talent, skill and creativity. Subscribed for more.

@CoolAgainRestoration Жыл бұрын

Thank you very much Oleo and glad you subscribed to a legit channel. Thanks again 😊

@jamesbizs Жыл бұрын

Yeah, because this was in no way a restoration. He made it into something almost completely different than original. I don’t understand how the word restoration got so perverted.

@ericpetersen230 11 ай бұрын

@j p I agree on technicality but not tone or spirit. Yes, technically, the finished vise is in different condition from factory. It has nickel plating on hardware that very well could have been left in the white, it is more than likely not the exact same tone of paint, and many of the original casting defects that would have been "good enough" had this gone to market from Wilton's factory. I might even go so far as to say the replacement of many likely forged components (handles) with machined equivalents would bring this from out of the realm of a pure 1:1 'restoration'. This vise was partially functional, if battered, and so an argument could also be made that this wasn't a 'restoration of function' either. HOWEVER: this vise retained almost all of it's original parts. The only parts that were replaced (aside from the jaws) were done so because they were no longer serviceable, and with great care to replicate the form of their counterparts. There is an obvious care given in this (and other content of theirs) to return the item to the original or higher quality condition. Also, this is art. These restorations take inordinate amounts of time and well over the cost of the original item (even retail), and provide no better, and in many cases worst, utility to the user. This is done for their own enjoyment first, and our edification as viewers second. Please, kindly, blow that snarky gatekeep-y 'not real restoration' bullcrap out of your overtightened rear.

@CoolAgainRestoration 11 ай бұрын

Thanks Eric 🙏

@theskyehiker 11 ай бұрын

What Eric said.

@fredkloster7895 7 ай бұрын

My neighbor was a tool and die maker for Wilton in the 60"s. he lived in Schiller Park IL. A German. He had a part in this process. So proud to see this video. Danke

@CoolAgainRestoration 7 ай бұрын

Bitte schon 😊

@RestorationVideo Жыл бұрын

This is a really talented artist. I really admire you

@jt9498 Жыл бұрын

Absolutely outstanding restoration! This is the one vice I wish I had! Superb workmanship! Thank you for a wonderful video!

@CoolAgainRestoration Жыл бұрын

Thank you very much J T 😊 glad you liked it

@siriustraveler7083 Жыл бұрын

Excellent 👌

@Captainalexstars94er Жыл бұрын

Excellent Job Sailor Cool, your Restoration was a Success and deserve A Gold Medal for your Hard Work 🏅👈🏼

@CoolAgainRestoration Жыл бұрын

Thank you very much Captain Alex 😊 cheers 👍😎

@dreamtheprotogen Жыл бұрын

Seeing one of these videos pop up in my recommendations always makes me happy.

@CoolAgainRestoration Жыл бұрын

Thanks for support

@peterc2248 Жыл бұрын

Stunning. Excellent work.

@CoolAgainRestoration Жыл бұрын

Thank you very much Peter 😊

@JR-dd4ec Жыл бұрын

Beautiful restoration AND the editing was perfect

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked it so much 😊

@chjr4740 2 ай бұрын

That green color was gorgeous!

@CoolAgainRestoration 2 ай бұрын

Thanks a lot and glad you like it 😊

@abhaykamath2988 Жыл бұрын

Now this is a perfect restoration. MyMechanics has a worthy and tough competitor. Excellent job 👏🏻👏🏻.

@CoolAgainRestoration Жыл бұрын

Thanks a lot Abhay 😊

@tomswindler64 Жыл бұрын

Great item for restoration,believe you made it better than new.great video,like the full detail on the restoration.just keep doing what your doing and carry on 👍👍👍😎😎😎

@CoolAgainRestoration Жыл бұрын

Thank you very much Tom and glad you liked it so much 😊

@bucurvictor Жыл бұрын

Masterwork as always. I really liked the paint job. Very spectacular.

@CoolAgainRestoration Жыл бұрын

Thanks bro 😎

@stritheor Жыл бұрын

And here I was thinking vises are just awesome tools needed in every shop. Today I learned they can be sexy AF too. That was some sensational work I have no doubt I can't afford and is worth every penny.

@CoolAgainRestoration Жыл бұрын

Thanks a lot mate 😊

@MorsCustos Жыл бұрын

Lately i've been having a hard time trying to find what i want to watch, i usually rely on my FYP but i haven't been getting video's that i liked but whenever one of your video's show up it's always a sure click. Keep doing what you do and may the darkness of this world stay away from thee.

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊

@GregCurtin45 Жыл бұрын

Always worth the wait for your videos. Beautiful craftsmanship. Thank you for taking the time to film, edit, and share with us.

@CoolAgainRestoration Жыл бұрын

Thank you very much Greg and glad you liked it 😊 I try my best every time

@gerryhuntman Жыл бұрын

Wonderful work and a beautiful colour. I love your attention to detail. Bravo!

@CoolAgainRestoration Жыл бұрын

Thank you very much Gerry and glad you liked it 😊

@hanitiger4614 Жыл бұрын

WILTON company should send you a thanks litter for what you do for this vise. Your make it so cooooool and perfect. Thank you sir for sharing us your work. 🎩 off

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊 cheers

@timziegler9358 8 ай бұрын

Absolutely beautiful! It was a joy watching you restore this vice. Best wishes.

@CoolAgainRestoration 7 ай бұрын

Thanks 😊

@SharpTimelapse Жыл бұрын

I find your videos so relaxing, also I love the level of detail and enjoy every part of the restoration! Keep it up!!

@pickletreewoodcraft7858 Жыл бұрын

It’s definitely a fact that you made this much nicer then Wilton did, both in appearance and in quality. Your finishing and improvements of strength in the components make this a very polished vice and I like how you didn’t get silly and go crazy with bondo lol!

@CoolAgainRestoration Жыл бұрын

Thank you very much buddy! Glad you liked it 😊 cheers

@fasteddy07 Жыл бұрын

That handle is a piece of art! 😮

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked it 😊

@Anmobgoccult20 Жыл бұрын

Again, Eeee, well done again, it's a great honor for me to see another person with precise attention to detail and his wonderful work, well done and respect from old BG.

@davouchi1 Жыл бұрын

Amazing results. Well done sir, you have great skill and i really enjoy watching a master. Keep up the good work.

@CoolAgainRestoration Жыл бұрын

Thank you very much mate ! Glad you liked it 😊

@AllanAoyamaTrue Жыл бұрын

O melhor segundo canal de restauração, o My Mechanics que se cuide!

@CoolAgainRestoration Жыл бұрын

😅😅 thanks buddy

@sergbelov6267 Жыл бұрын

😂😂😂

@estebangarcia6092 Жыл бұрын

My Mechanics it's out of the world!

@carlmcgee1623 Жыл бұрын

There are SICK, SICKER and yours is the SICKEST restoration of a Wilton I have seen as of yet. These vises are highly sought after and you restoring it to better than brand new is worthy of high praise. JOB WELL DONE SIR !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@CoolAgainRestoration Жыл бұрын

Thank you very much Carl 😊 glad you liked it so much

@LethargicSquirrel 5 ай бұрын

This is the kind of work I would love to make a living off of, and would love to learn from people like you how to do it. I wouldn't hate going to work every day, and would be doing something I could take pride in!

@xxPenjoxx Жыл бұрын

Sure, the date me be wrong but I am just glad to see it looking so beautiful again. Keep up restoring these forgotten tools, you did an amazing job 👏 Also, watching the fly cutter was extremely satisfying.

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked. The fly cutter in working is really satisfying, I liked too 😍

@badgerservices9665 Жыл бұрын

Excellent work. This was a great refurb of the vice, seen so often on YT but rarely to this level. Personal preference, I like to see the original badge, label etc if its not too far gone. Gives a hint of the true age of the piece. If its completely destroyed however, recreate it, sure. But this one didnt seem too bad to be honest.

@CoolAgainRestoration Жыл бұрын

Yes , you have right. But I keep all of the left parts. For example I have the rough jaws and the sticker too. Also the metal parts that left from every thing I restore is kept in a bag together with the main thing 😇

@giandanielbriannes2558 Жыл бұрын

Nice restoration! Asmr 20/10!

@CoolAgainRestoration Жыл бұрын

Thanks Daniel 😊

@erniescarano1522 Жыл бұрын

Understood.....I was just reminded of when I over restored a 1969 Camaro SS.....I used have a lot of un driving it but after 30K of restoration I was afraid to drive it. I sold it and never restored another vehicle.....glad you use the Wilton....you certainly are a craftsman.

@CoolAgainRestoration Жыл бұрын

Thanks a lot mate 😊

@teacheme Жыл бұрын

Best vice restoration I've watched in the past couple of years, and I watch a lot. Your metalworking skills are exceptional. I like your video editing whereby you do not linger on shots unnecessarily (do people still want to watch sandblasting in it's entirety?) Keep them coming and I hope you soon reach your millionth subscriber.

@CoolAgainRestoration Жыл бұрын

Thank you very much Costa and I appreciate your support. Yes, they still want to see more than one minute of sandblasting. I tried to sort the work and sandblasting footages to be more shorter but from time to time in the entire video. I try to please all the needs of every viewer . Thanks a lot again and be well 😊👍

@freckhard 6 ай бұрын

@@CoolAgainRestoration The length of your sandblasting footage is in the sweetspot, not too short, not too long, I personally love more of it, maybe a timelaps would be a good compromise but this restoration is an absolute masterpiece! I have to compliment it even further with a second comment!

@DrHutOfHandcraft Жыл бұрын

Insanely good, awesome job mate, This looks better than new!

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊👍 cheers

@philwell76 Жыл бұрын

Just old…in really good shape…very nice resto!

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊

@axxl_24 11 ай бұрын

Beautifully brought back to life.

@CoolAgainRestoration 11 ай бұрын

Thanks a lot 😊

@bryantthacker8356 Жыл бұрын

How many total hours did this one take? Is there an average time you typically expect to spend on a restoration?

@CoolAgainRestoration Жыл бұрын

Hi Bryant ! I don’t have expectations, is very hard to see before restoration how the project will be. I worked 36 days, 4-5 hours per day .

@peterespada6226 2 ай бұрын

Sorry, folks-this is not a “restoration”-it’s an “enhancement”. If you were to go out and buy this item with all the extra work and refinement put into it, you wouldn’t be able to afford it.

@dixonqwerty Жыл бұрын

Holy crap dude that's 100% perfection!

@CoolAgainRestoration Жыл бұрын

Thank you very much and glad you liked it 😊

@user-uw9eg4nk1d Жыл бұрын

أنت إنسان مبدع .... لقد استمتعت بهذا الفيديو ... سوف أعيد مشاهدته مرات عدة .... شكرا لك آمل أن نلتقي يوما ما

@TheCatMan777 11 ай бұрын

A work of art now!

@madmaz8890 7 ай бұрын

I love the time you take on these restorations, no half arsed fixes, if it's not right you make it right or make a new one, so very impressive and therapeutic, trust craftsmanship

@CoolAgainRestoration 7 ай бұрын

Thanks a lot and glad you enjoyed 😊

@NTRprojects Жыл бұрын

Perfect finishes are evidence to the many hours that you must have invested. really impressive work my friend.

@CoolAgainRestoration Жыл бұрын

Thanks bro 😎 cheers 🍻

@Bigfootz2004 Жыл бұрын

The duck at the end earned my subscription!

@CoolAgainRestoration Жыл бұрын

Glad you liked it 😊

@sa3key Жыл бұрын

Makes me want to restore my vice. Beautiful!!!

@CoolAgainRestoration Жыл бұрын

Thank you very much Ben 😊

@theeb1800 Жыл бұрын

Wow, this is one of the most perfect things I've seen, second best restoration of someone who embodies the use of a lathe

@CoolAgainRestoration Жыл бұрын

Thank you very much, you are so kind 😊

@robertmanley7556 Жыл бұрын

This is beautiful ....so many things are mass produced the finer details and pride in producing of a item are lost .But here you have done a wonderful job of bringing this Wilton Vise back to life with much higher standards of quality than before . Excellent work !! 👍👍

@CoolAgainRestoration Жыл бұрын

Thank you very much Robert and glad you liked it 😊 cheers

@user-cc4xz3ib7w Жыл бұрын

Прекрасный результат! Вещь получилась хоть сейчас на выставку! Браво, мастер!

@CoolAgainRestoration Жыл бұрын

Spasibo brother 😊

@bighouse1695 8 ай бұрын

Fantastic restoration! I love the trick of drilling holes in those metal pieces to hold that marble/ball bearing for the knobs

@CoolAgainRestoration 7 ай бұрын

Glad you liked it!😊

@gilbertmesen3558 5 ай бұрын

OMG. U. R. THE BEST. MAGIC 🎩...THANKS FOR SHARING YOUR JOB

@CoolAgainRestoration 5 ай бұрын

Glad you like it 😊 wish you all the best

@john20johnny 2 ай бұрын

Awesome, thank you for sharing ❤

@CoolAgainRestoration 2 ай бұрын

Thanks a lot John 😊

@DrakeKillah Жыл бұрын

Great work! That vise went from too nasty to touch, to too nice to be used. Extremely satisfying end result!

@CoolAgainRestoration Жыл бұрын

Thank you very much and glad you liked it mate 😊

@upreid 9 ай бұрын

Beautiful, just beautiful.

@CoolAgainRestoration 9 ай бұрын

Thank you very much! 😊

@illuminant1129 Жыл бұрын

A real masterpiece of restoration work. Top marks. 👍

@CoolAgainRestoration Жыл бұрын

Thanks a lot and glad you liked it 😊

@DavidPlass Жыл бұрын

Beautiful result! Love that hammered look.

@CoolAgainRestoration Жыл бұрын

Thank you very much David 😊

@RealElpygo Жыл бұрын

It's my ASMR. I love these video’s.

@CoolAgainRestoration Жыл бұрын

Glad you liked it, Frank 😊

@samhackney5977 Жыл бұрын

SOooooo beautiful! Looks like it was built at the Rolls Royce factory. Anyone would be proud to own such a beautiful piece of equipment and maintain it for a very long time. Heirloom quality.

@CoolAgainRestoration Жыл бұрын

Thank you very much Sam 😊 glad you liked it so much

@kimodonnell7405 Жыл бұрын

It's too nice to use! Beautiful work. Thank you for filming it and sharing it with us.

@CoolAgainRestoration Жыл бұрын

Thank you very much Kim 😊

@jeffreybrianring6392 Жыл бұрын

Incredible restoration, that vise is way to nice to use, it is a center piece for the dinning room table.

@CoolAgainRestoration Жыл бұрын

Yeah but it is already in use in my workshop. Check my last video 🙈

@kenhoever8245 4 ай бұрын

Absolutely superb restoration. You really cover every aspect of the vise!

@CoolAgainRestoration 4 ай бұрын

Thanks a lot and glad you enjoyed so much 😊

@needleonthevinyl Жыл бұрын

Oh wow! I use my 1755 at work every day and have for years. It's in about the condition of yours before you started and it deserves a restoration too. Great work as always!

@CoolAgainRestoration Жыл бұрын

Thank you very much Bill! It is a nice vise to work with 😎

@Bigfoot14000 Жыл бұрын

An outstanding video of an outstanding restoration of an outstanding vise.

@CoolAgainRestoration Жыл бұрын

Thanks David and glad you liked it so much 😊

@zube6996 Жыл бұрын

That is one of the best vise restorations I have ever seen! I love the color!

@CoolAgainRestoration Жыл бұрын

Thank you very much and glad you liked it 😊

@georgelequin5070 Жыл бұрын

Excellent work my friend!👍👍👍

@CoolAgainRestoration Жыл бұрын

Thank you very much George 😊👍

@vidhoard Жыл бұрын

So amazing! Longer sandblasting shots please! 🙏🙏❤❤

@CoolAgainRestoration Жыл бұрын

Thanks 😊

@RookieLock Жыл бұрын

Perfect choice of paint for that as cast finish. Very nice work !

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊

@billofalltrades2633 Жыл бұрын

I got a similar Wilton from my buddies uncle, 1986 . He said it was junk, he used it 30 plus years and it was packed full of metal shavings and dust. I did the same thing and use it In my garage. I had to replace the jaws but it works great, he can't believe that I was able to restore it. Beautiful restoration!

@CoolAgainRestoration Жыл бұрын

Thank you very much. Keep it safe 😎

@doingstuffwithdan9692 Жыл бұрын

That is an excellent restoration, well done.

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊

@hughschwartz6438 Жыл бұрын

Absolutely outstanding attention to detail, a superior product than new!

@CoolAgainRestoration Жыл бұрын

Thank you very much Hugh 😊

@tatermater2613 Жыл бұрын

The best vise resto I've seen. Never seen induction used in a resto video. interesting

@CoolAgainRestoration Жыл бұрын

Thank you very much mate 😊

@williamfindspeople4341 Жыл бұрын

Insanely valuable vise to replace. Beautiful job mate.

@CoolAgainRestoration Жыл бұрын

Thanks again mate 😊

@IraDuncan Жыл бұрын

Impressive work. Always love seeing a Wilton come back to the condition it deserves to be in. Well done.

@CoolAgainRestoration Жыл бұрын

Thank you very much buddy 😊

@LeesaDeAndrea Жыл бұрын

Excellent! From junk to gorgeous!

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked it

@charlesswart4914 Жыл бұрын

I like to drink a beer after work and watch your videos. Better than any Prozac by far. Good job dude.

@CoolAgainRestoration Жыл бұрын

Thank you very much Charles 😊 cheers 🍻

@LadyLeigh 5 ай бұрын

That is so perfectly restored I wouldn’t want to use it! I would just keep it and look at it everyday! ha ha.

@CoolAgainRestoration 5 ай бұрын

😅😅 that was my thoughts too but I mounted it on my workbench and is already in use from some months now 😊

@mskayla7747 Жыл бұрын

Nice job. Saved from the scrap yard and in better than new condition. A+.

@CoolAgainRestoration Жыл бұрын

Thank you very much Kayla 😊

@stepheno1870 Жыл бұрын

Looks absolutely beautiful now😃, godamm lush colour to boot, too nice to use now, brilliant restoration…..👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@CoolAgainRestoration Жыл бұрын

Thank you very much Stephen 😊

@ntinos4520 Жыл бұрын

great video and work, congratulations, I see you from Greece🇬🇷

@CoolAgainRestoration Жыл бұрын

Kalimera ntinos 😊 thanks a lot

@ivanhernandez1652 Жыл бұрын

What a master piece! Waooooo! 👍 Poor Ducky at the end 😆🤣

@CoolAgainRestoration Жыл бұрын

Thanks Ivan 😊

@jonjon3719 8 ай бұрын

That's perfection. Love the powder coat love to get my rims done with that. Great job.

@CoolAgainRestoration 8 ай бұрын

Thanks a lot and glad you enjoyed 😊 cheers mate

@Absaalookemensch Жыл бұрын

Excellent job. This is how it should have looked when new. Nice color.

@CoolAgainRestoration Жыл бұрын

Thanks and glad you liked it 😊