No video

The Moto Guzzi Griso 1100 CARC is a Maintenance Nightmare

  Рет қаралды 3,534

Little Ghost Griso

Little Ghost Griso

2 жыл бұрын

The Griso has done 177000km, Bearings in the rear have never been looked at, apart from that of the CARC, we found some issues, which has been a little bit of a drama to rectify.
Definitely worth considering a look, and service yours, no matter the bike. Before it gets to the condition of mine.

Пікірлер: 10
@rupertthebusdriver8997
@rupertthebusdriver8997 9 ай бұрын
Any one who starts a job on a guzzi with a pint of home brew has got my complete attention hehe , Knowing when a part is unserviceable ,is one thing ,but knowing when it's buggered, is the exact term, I believe used in the guzzi factory ,,,eledgedly 😛
@Coolcrazyq
@Coolcrazyq 9 ай бұрын
Ha ha thanks. The Guzzi is fun to work on, until it isn't, or if things don't go quite to plan. I reckon there must be quite a few close to buggered parts installed on the bikes at the factory... maybe ?? Ahhahaha 😂🙃🍻😀😎
@kingcactus2000
@kingcactus2000 2 жыл бұрын
Its always a journey, thanks lil ghost
@Coolcrazyq
@Coolcrazyq 2 жыл бұрын
You are 100% not wrong, With all the love for the machine, it can cause a few headaches from time to time.
@chrisbeardsley9829
@chrisbeardsley9829 2 жыл бұрын
That home brew looks nice.....but is as nice as Dangerous's home brew?
@Coolcrazyq
@Coolcrazyq 2 жыл бұрын
I am in firm belief that this brew is better. hahaha Cheers to that!!!!
@andycoomber6159
@andycoomber6159 Жыл бұрын
Hi. Can you remove the drive shaft from the swing arm, whilst still on the bike?
@Coolcrazyq
@Coolcrazyq Жыл бұрын
You could, by sliding to the side the rubber boot. But you need to be able to give it a good solid whack for it to disconect. Your real problem, would be getting it back on with the swing arm in place. It is a pain to take the arm off and more so to put back on. But the job will be easier in ways. And you can then also check the swingarm bearings.
@andycoomber6159
@andycoomber6159 Жыл бұрын
@Little Ghost thanks for the reply...what secures the drive shaft to the output shaft? It always helps to be prepared.
@Coolcrazyq
@Coolcrazyq Жыл бұрын
It's got like Fitted circlip, which with a good solid knock will release, It will slide and lock back in with a lot less force.
Reviving the Moto Guzzi Griso: Back on the Road!
20:15
Little Ghost Griso
Рет қаралды 1,1 М.
I Built a Transparent Boomerang (it's lethal)
13:10
Mike Shake
Рет қаралды 3,7 МЛН
Fortunately, Ultraman protects me  #shorts #ultraman #ultramantiga #liveaction
00:10
The Giant sleep in the town 👹🛏️🏡
00:24
Construction Site
Рет қаралды 18 МЛН
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 7 МЛН
Chinese sniper vs. American sniper during the Korean War (1952)
50:39
13 WORST Motorcycles From The 1970s, Nobody Wants Back!
22:14
Vintage Vehicles
Рет қаралды 167 М.
The Rare Engine that Kills Everything it Touches
10:02
FortNine
Рет қаралды 5 МЛН
I've Wanted To Try This For YEARS! | Moto Guzzi Griso 1100 First Ride
21:12