One thing I learned when operating these things is always box the sucker in with plywood boards. Especially in residential areas where there’s windows and cars. We specifically have two 4’x 8’ boards that we prop up next to the stump to help mitigate the chips flying around. It’s better to play it safe over fixing a $600 window.

Did not know how a stump grinder works. Thought it would take minutes I suppose on size of tree thanks buddy good video

Those stump grinders as absolutely beasts...when the teeth are fresh and sharp 😂. I had some fun running those a year ago

Nice video always enjoy watching different equipment being used. Ventrac is my favorite

My apologies for being a backseat driver but perhaps I might make a few suggestions. It was not a bad 1st attempt, you did OK, and practice makes perfect, (1) at 2:01 the teeth shown do seem to be a bit worn (sharp teeth cut faster), (2) 2:39 for the 1st pass, I would suggest rolling the grinder back 6 to 8 inches and start with a much smaller bite. (3) The deeper you cut the longer the arch of the grinding wheel is in contact with the stump (creating more drag and bogging the machine down. I wish you well.

Looks great so far!

I remember my first project using a stump grinder - it was my mother's backyard and she insisted on being involved, so you can imagine how that went.

Those teeth are so dull they didnt make chips, they made sawdust

Hi this is Brad with Copper Creek Cuts, a lawn care company in Northeast Florida

That’s a nice tracked grinder, do you still have the big green trailer? I don’t see it anymore.

Do you plan on making another lawn mowing video soon? I just realized it’s been a while since a classic lawn mow

That is a thorough job!

Those are the shape of the factory Vermeer teeth....each end is semi-round and they can be unbolted and flipped around 180 degrees.

How long did the job take?

Is there any piece of lawn equipment you haven’t used?

I've been hit in the cheek by gravel while using 1. Always random foreign objects around tree stumps.

I love a good a stump grinding.

I did tree surgery for 16 years, stopped in 2019, a lot of my work was stump grinding, here in the UK, to work for a legitimate company, you need the proper training, i have NTPC unit 0020-54, all rental places near me, wont rent you the machines, unless you can show your NTPC card as proof that you have the appropriate tickets.

Well that made light work of that didn't it! 😮

Throwing some high-N fertilizer on those wood chips will help then decay more quickly.

Imagine a rental with dull teeth . it would have been a lot faster if it was a piece of equipment someone cared about . I wonder if it was sharper if it would have left such a mess

Those teeth aren’t naturally sharp. They are just big af. I don’t understand the people that think they know everything about this line of work.

All you have to do is loosen the teeth and rotate them which gives you 3 sides, that’s the whole idea of the round teeth. From the close up shot at 2.02 minutes it looks like you still have one good side left.

4to6 inchs deep to grow sod

Your experience with this grinder would have been much better if the company you got it from actually knew how to care for these machines. Those teeth are unacceptably dull. When I rent a stump grinder I give them hell if those teeth are dull like that until they sharpen them, turn them or replace haha

So how long is that entire stump take? If it took over 4 hours you should have just hired someone because that machine is practically $350 for an entire day to rent it plus $1,000 deposit at the Home Depot that's near me

Is this machine cheaper than the ventrac stump grinder ??

Try and not take as big of a bite it will let you grind faster 1.5-2 inches at a time works well for the small grinders

3:34 your hand was not on it. You were touching it a bit….

Rented pile of ****, we all seen it, all been there.

stump had natural hole in middle, id'a lit it like a candle😏🔥🔥

You rented a dull stump grinder when you could have bought a very nice sharp stump grinder for your Ventrac!

2:04 you are actually very wrong! You are forgetting that you are cutting through soil.. rocks.. a lot if things. That edge is made to last… not to be sharp like you want!

I would let the owner of that equipment rental place no other malfunctions in his equipment and then I would actually give them a bad review for renting it out like that

If it werent for the fact that you wanted it to go immediatly, you could also have enocoulated it with any spores of edible fungus or fungi that feed on wood and have it decay faster and have tasty mushrooms. Shitake for example or lions mane or smth along those lines

I dont care for that style because you cant see the wheel contact the stump.

Second 😂

Great job otherwise 🤷🏾‍♂️

First

Shouldve just drilled out the center hole a tad bigger then drill in from the side about a 1" hole and burned it out.