Cordless Drill Chuck Removal

Рет қаралды 460,223

6 жыл бұрын

Amazon links:
RÖHM Extra RV80 Keyless Chuck RV 80 1.5-13 mm Socket 1/2 Inch Metal www.amazon.com/Extra-RV80-Key...
CHUCK JACOBS 400 SERIESNON CARB www.amazon.com/CHUCK-JACOBS-4...
Keyless Drill Chuck Extra50-RV13 Röhm 1322450, for Milwaukee, 1/16"-1/2 Clamping Capacity, 9/16"-18 Mount www.amazon.com/R%C3%B6hm-Extr...
1/2"-20 Rohm Keyless Chuck: www.amazon.com/Rohm-893350-Ex...
3/8"-24 Rohm Keyless Chuck: www.amazon.com/Rohm-893351-Ex...

Пікірлер: 354

@SirFeatherfoot Жыл бұрын

This video may be 5 years old. But it's still useful to me today. Thanks for the no fluff content. It's much appreciated.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@bjhonusa Ай бұрын

Very simple and efficient. I am watching you tube due to creaters like you. ❤❤❤❤❤❤

@AroundTheHome1 27 күн бұрын

Thank you so much 😀

@danielshelton9724 2 ай бұрын

Thank you! I just did this after watching your video and swapped out my Chuck with a older drill that had burned out and it worked great now. Thank you for the content!

@AroundTheHome1 2 ай бұрын

Glad it helped

@stephensmyth6363 Жыл бұрын

Second time changing a chuck on a makita drill . First time was for a friend , the chuck was completely broken. Teeth were broken so couldn’t use an Allen key . Cut outside chuck casing with a grinder and locked a 24” pipe wrench on chuck to lock it and used a steel site box for mechanical leverage to spin the chuck off . Tried your method today and had no luck . But decided to just use the vice grips as leverage with the Allen key and it came off . Good video ,thanks !

@jimbo3267 2 ай бұрын

Your very detail video saved my Harbor Freight Hercules 1/2" 20V Model HC92K1 drill which sold for $120. It was advertised as "comparable" to the Dewalt drill and a compatable chuck sells for $16 on Amazon that one reviewer indicated it fit Hercules. My drill's chuck would open to full width but would not tighten enough to hold any drill less that 1/4". The screw in the chuck was a Toric 15 and it turns out that it was very loose. I tighten the screw (left threads) and now it works just fine and no new chuck needed.

@AroundTheHome1 2 ай бұрын

Glad to help

@markfrenzel4718 8 ай бұрын

Fantastic! My dad and I were scratching our heads for a minute until he said “just KZfaq it”. And here I am. Took us 2 minutes after that. Thanks for the video!

@AroundTheHome1 8 ай бұрын

Glad you enjoyed it!

@testgames4028 Жыл бұрын

Thanks a lot man, you're brilliant. Very helpful video, it's how smart you work with things, not how much force you use or waste efforts and time. No damage or scratches or anything to the drill. Clean Work 👍.

@AroundTheHome1 Жыл бұрын

Thank you very much!

@martiniindustries 5 жыл бұрын

Thanks for the video. I ended up using a breaker bar and the largest 1/2" drive hex bit that I could fit into the chuck, which ended up being a 7/16" hex for my 1/2" drive drill. I pinned the breaker bar and the drill against the ground and bumped the trigger to break the chuck loose.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@GregEpkes 4 жыл бұрын

Awesome advice! Best solution I’ve seen. Worked with no effort.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@TheWinger1008 4 жыл бұрын

Nice! You just saved me a bunch of time. Thanks for taking the time to make this video.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@5850Corazon 3 жыл бұрын

Thank you, outstanding presentation! I hadn't considered using the strength of the drill itself to do the work. Thanks again.

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@claudegoldstein2788 3 жыл бұрын

Nice video helped me out! Ready to replace the crap chuck that came w my Hitachi cordless

@baka120y4 3 жыл бұрын

Awesome! Just what I was looking for. I replaced the chuck in my Ozito in 10 mins after watching your vid. Thanks!!

@AroundTheHome1 3 жыл бұрын

Glad it helped! Thank you! 😊 And thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@shawn576 4 жыл бұрын

Thanks for sharing. One tip is that you can use an impact driver to tighten or loosen the screw inside the drill chuck. This way you won't risk anything grabbing, smacking you in the face, etc. Drills are probably in the top 3 causes of testicle-related injuries.

@AroundTheHome1 4 жыл бұрын

Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org/

@bigoljohn3313 2 жыл бұрын

Exactly what I was thinking :)

@wrblue08 2 жыл бұрын

Yesterday I was trying to twist off the screw with a screwdriver till my skin almost came off. Then I mounted a flat head bit to my mid torque impact wrench and it loosened with just a flinch of the trigger.

@cyeelai1852 2 жыл бұрын

Curious, What are the other top 2?

@rickanthony8259 2 жыл бұрын

Always thinking I can do things with no assistance! This video shows lots of ways to assist a stubborn chuck! Don't tell my kids I didn't know how! Now I do!!!

@AroundTheHome1 2 жыл бұрын

Don't worry, I won't tell. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Dm-dk9zp 2 жыл бұрын

I was going to buy a new drill but thought I’d check out KZfaq, that’s what was wrong with my drill!!! You just saved me $200.00 dollars!!

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@crazykittenvideos855 Жыл бұрын

Thanks man! Just took a decent Chuck off a cheap drill where the battery was dying. Hoping that the thread will match an old corded drill I have with a key. Keyless is just a whole lot nicer for low torque jobs like the softwoods I tend to use. Thanks again

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@beerless2950 2 ай бұрын

If I would have found this video long before, oh boy! Thanks! Saved my life!

@AroundTheHome1 2 ай бұрын

Glad to help.

@mikesmusicden Жыл бұрын

Great video; thank you for taking the time to make it!

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@PDjargon 2 ай бұрын

Thank you for this video as I could not for the life of me find a drill that had a chuck to accept anything above 10mm but plenty of chuck replacements that could. I thought it would be possible to switch it out but man the drill chuck did not want to let go of the drill..makes me think that they really don't want you do switch them out yourself since it moved my arm at a few points. But again your video made me keep on going and I've gotten it off just need to get the replacement chuck on now.

@AroundTheHome1 2 ай бұрын

Glad to help

@ladeda7033 4 жыл бұрын

Nice, thanks for the helpful video. Saved me some headaches . Just a little help there.... When you show something to the camera try holding it very still so our eyes can adjust, second hold it in place twice as long as you think nesessary. It gives US time to look, focus, and study without getting agitated about missing the picture. David west fire videos has this technique mastered. 👍 Again thanks for you taking the time to make educational videos ! Much appriciated!

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@kuntakoolkinte4242 5 жыл бұрын

Nicely explained. Your Calm relaxed attitude helps too. Thanks

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@thewildbunch2782 Жыл бұрын

thank you, this is the best and straight to the point video I have watched yet.

@AroundTheHome1 Жыл бұрын

You are very welcome.

@hasambition 5 жыл бұрын

Thanks for the video. Exactly what I needed.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@burtwillis1418 3 жыл бұрын

Great idea, thanks. I used a bench vice and that work perfectly

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@christopherbrown5338 4 жыл бұрын

Thank you! I'm making a 1/2 impact to drill chuck adapter using the chuck you recommended. I just didn't want to mess with the 1/4 hex drive version, my setup will be much stronger & versatile.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@christopherbrown5338 4 жыл бұрын

@@AroundTheHome1 I had to use a T20 torx on my Dewalt and vise grips (sucker was on there!) but I just removed it and I'll put the new chuck on the drill & make the adapter from the old chuck.

@AroundTheHome1 4 жыл бұрын

Sounds great.

@ashleycowen5104 5 жыл бұрын

Your method worked beautifully on a Makita drill! This method worked when all other methods didn't. Thank you for your tutorial!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@andyZ3500s 5 жыл бұрын

Most drills are the same style, I only came across one that was different in probably 30 years. 1/4, 3/8, 1/2 and 5/8 each have there own threads thought.

@samdang5246 Жыл бұрын

Thanks for taking the time to make this video.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@dillwiggle2 6 жыл бұрын

I had a Makita drill that would not come off by hitting it with a hammer and allen key like the other videos showed. This one actually works ! Just make sure drill is in the lowest speed (1) for most breaking power and it is in reverse. Also I put the other end of the allen key in a vise. And USE 2 HANDS ON THE DRILL. It can tear your wrist off if you don't hold it very secure and with both hands. Another method that looks like it would work is using an air powered air gun with a hex bit in the drill and the drill in a vise.

@AroundTheHome1 6 жыл бұрын

Thanks for watching, and I am glad to help. Don't forget to stop by our website www.greatwhiteninja.com

@Bamamike223 2 жыл бұрын

Thank you man! I was struggling with this thing. I appreciate it.

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@clerissonmesquita 2 жыл бұрын

Thank you so much for your invaluable information, highly appreciate it, keep it up the outstanding job, have a great day.

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@vladster264 22 күн бұрын

Thank-you! 🙂This is what I need, to loosen my chuck-and unfortunately maybe even replace it. I do agree, that does suck! For Milwakee to replace the chuck size.

@AroundTheHome1 21 күн бұрын

Glad to help.

@timc1341 10 ай бұрын

Brilliant Just used this trick to remove stubborn chuck on ridgid drill that was not coming off with the normal allen key/hammer trick everyone else recommends. Just be careful about the allen key / vise grip combo whipping around. Just touch the trigger at first to give you a gauge of how strong the kickback is going to be then brace yourself accordingly!

@AroundTheHome1 10 ай бұрын

Excellent!

@michaelcruz1434 Жыл бұрын

Excellent video, got me out of a bind. Thanks!

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@maxwang2537 2 жыл бұрын

This is impressive and very helpful. Thanks mate.

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@bigbeardog99 Жыл бұрын

Milwaukee doesn't suck! But you can still change the chuck on your newer M18s which use the 9/16"-18 chuck. At this time you will not find either of the ROHM 1/2"-20 or the 9/16"-18 on Amazon. But Suncoast Precision Tools has them. At least they have the 9/16"-20. I just received 1 and ordered another today.

@mohankrishnasamy1456 2 жыл бұрын

Thank you for your patience

@AroundTheHome1 2 жыл бұрын

No worries!

@travism2369 4 жыл бұрын

Great video could not have done it without you one tip for the next person once removing the set screw and inserting Allen wrench place the drill one the side secure against hard surface set to low gear and slowly press the trigger safer then pressing against abdomen! I was prying and beating I almost destroyed my hammer drill. Thnx buddy keep up the good video!!😬

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@Jericho_bella 4 жыл бұрын

Now this is a truly good KZfaq how to video nicely done bud and thank you 🙏

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@arontesfay2520 2 жыл бұрын

Thanks! This worked for my Craftsman drill

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@JimMcLaren1950 5 жыл бұрын

Excellent detailed video, have to replace my chuck its worn out and is hard to tighten and loosen when installing drill bits.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@glennjames1756 5 жыл бұрын

EXCELLENT Video. Thank You sir

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@pietypereira8239 2 жыл бұрын

Thank you so much for sharing your idea.

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@rhettharrelliii9082 4 жыл бұрын

This is the 4th video I watched and I wish it was the first, I will subscribe after watching this! Thx!

@AroundTheHome1 4 жыл бұрын

Glad to help. Thank you for watching, and please share. Check out hundreds more of our videos at www.aroundthehome.org/

@shaun2049 5 жыл бұрын

Thanks mate my chuck just went on my m12 drill video was great going to buy new drill now l can buy just the chuck

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@snoopytheace4487 4 жыл бұрын

My m12 fuel hammer drill the chuck has gone bad twice. I'm taking it back to be fixed again. And my other Milwaukee drill clutch has gone bad.

@MarkMcCluney Жыл бұрын

Extremely helpful, thanks mate.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@andrewmac2729 4 жыл бұрын

Cool video! Top man easy to follow,Thanks .

@AroundTheHome1 4 жыл бұрын

Glad to help. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@raviseepaul9106 4 жыл бұрын

Any help on putting back one of the part that holds the drill bit.one of mine came off Milwaukee m18

@innernetfunhouse1161 3 жыл бұрын

Thank you. Super clear video. I agree the hammer and vice stuff is really unnessisary.

@AroundTheHome1 3 жыл бұрын

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@PowerScissor 4 жыл бұрын

Explaining that's just the way you learned to use a chuck. Oh, and also, I break them all the time and am on my 3rd one. LOL. J/K. Good video, needed the info.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@timeanspace 5 жыл бұрын

Great, clear video!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@Ilovetosingem Жыл бұрын

Nice one. Thanks a lot for the info. Keep safe you and yours.

@AroundTheHome1 Жыл бұрын

Thanks, you too!

@mrtuba9 3 жыл бұрын

Thanks dude! I’ll try tomorrow 👍🏼

@AroundTheHome1 3 жыл бұрын

Good luck. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@oilsmokejones3452 2 жыл бұрын

Smart all the way..thanks..I'm going to try replacing a 19.2V Craftsman chuck with one from a Ridgid parts drill..hope the thread matches..the Sears is a strong drill but never really gripped bits very well..

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@dougdroen7519 7 ай бұрын

How would u break it loose if the screw inside the chuck is a revet instead of a screw....

@Andrew-tg4jf Жыл бұрын

Can I use my drill to screw it only has the setting to make holes?

@SuperMurrayb 5 жыл бұрын

It would be helpful to know which company made the chuck on your drill. Some brands seem to be worse than others.

@jbroofingsystemsllc.6046 5 жыл бұрын

Nice Video, I ordered a new chuck an had the old one off within 30minutes of watching the video

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@Chokani 5 ай бұрын

I learnt something within two minutes!!!!

@chewy2243 2 жыл бұрын

Wow Your Video Helped Me Remove The Chuck 100% Spot On👍

@AroundTheHome1 2 жыл бұрын

Great to hear!

@guyde-vires522 3 жыл бұрын

Thank you for your great video

@AroundTheHome1 3 жыл бұрын

Glad it was helpful! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@user-mr2bl7kw8h 4 ай бұрын

Great vid.

@AroundTheHome1 4 ай бұрын

Thanks for watching

@MFauzanHD 5 жыл бұрын

Nice vid man!!!

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@KRSBU 5 жыл бұрын

Thanks for the video which is very helpful. My only comment is, circa 3’ 10” in, I would not suggest placing any tool under torque anywhere near the groin area, as it could lead to painful consequences, or worse, injury. Better to put the mole grips in a vice.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@edmoore2786 Жыл бұрын

Hi, great video. Any idea what the securing screw thread size is? Metric or imperial? Mine needs replacing!

@MuftakisWorld 4 жыл бұрын

hello the problem is my device has 2 chuck its black & decker cordless 14.4v driver/drill i have screwed out the screw so easily but the problem with the 2 collars after turn one it goes to point that stop and start turning the one behind it so i tried to use 2 wrench one fix one and another wrench to loose the another collar but here is the big problem it doesnt loose whatever i push it so how to replace this doomed chuck i am stuck now with broken jaw teeth??!!

@garyr7027 Жыл бұрын

Oh yeah, this is the way to do it, the chuck on my drill came right off. After trying the, hit the Allen key with a hammer trick multiple times, but not too hard, the chuck still refused to come off. Did it like this and she spun off with ease. Thank you sir for this advice... it does indeed work. Only thing I did different was I use a number 3 Phillips to remove the screw, it holds better than a flat... just sayin.

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@MHumanoid 10 ай бұрын

Unfortunately this didn't work for me. Drill doesn't have enough power at 55 nm, and whacking with a hammer won't get it loose. I can use raw force with extra leverage on the allen key, but it just seems to turn the chuck somehow. It's at speed 1, drill mode and in reverse. Any ideas?

@shegar2011 4 жыл бұрын

I can breath easy, I dropped one at work and I thought I was going to have to replace the whole drill cause the chuck had a dent (and where I work a dent is enough cause to charge you for a replacement) but with this I can just repair it should the need come because that dent does not seem to have a negative effect. Thank you!

@AroundTheHome1 4 жыл бұрын

Thank you for watching, and please share. Check out hundreds more of our videos at www.aroundthehome.org/

@jacklcma Жыл бұрын

Needed to clamp and hit with my mallet for my Rigid drill. Good video and links.

@AroundTheHome1 Жыл бұрын

Right on. 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@JustinCrediblename 5 жыл бұрын

great price on that amazon link. even with the sales tax, it came out cheaper than any other ebay option by about $1.

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@olivergrein5764 4 жыл бұрын

I will try it tommorow. Thanks.

@AroundTheHome1 4 жыл бұрын

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@steveans 3 жыл бұрын

Brilliant! Subscribed

@AroundTheHome1 3 жыл бұрын

Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@utubeozpat 5 жыл бұрын

Great video, thanks. Anyone watching this for instructions is surely not as experienced as you are. These are your target viewers. Best to have the allen key in the vise, short bursts of power with two hands on drill, one elbow down side depending whether removing/replacing to catch the kickback. No nasty injuries. You mentioned that the chuck is the weakest link but as the chuck is easily replaced sometimes it's better for it to break before the drill does. Thoughts?

@JoseGonzalez-uh7hw Жыл бұрын

. ..k. . . . .? . . . .

@JoseGonzalez-uh7hw Жыл бұрын

@paulkremastiotis6296 6 ай бұрын

Thank you so much 🙏

@AroundTheHome1 6 ай бұрын

You're welcome 😊

@lukebenbow4204 4 жыл бұрын

I got the same milwaulkee drill , brand new and the chuck is grinding my drill bit down like its a friggin lathe. My hexagon shank on my arbour has now become round and a very small diameter from say 10 mm down to 4 mm. This chuck i have is killing me and my bits

@AroundTheHome1 4 жыл бұрын

I know, it is a disappointment to have such a crappy chuck on a Milwaukee. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@bobengelman1937 Жыл бұрын

Well done !

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@publicaccount7246 Жыл бұрын

Wow a new screw that holds the chunk, no wonder it comes out so easy. Try one that's been on for a while or the teeth are stuck in the middle and can't get anything in!

@rrohret21 7 ай бұрын

It may also work with a Robertson driver/bit.

@pauleohl 3 жыл бұрын

You are right that the chuck is the weak link. Thanks for the video.

@AroundTheHome1 3 жыл бұрын

Glad it helped! Thank you! 😊 And thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@parwezalam2497 6 ай бұрын

Thanks very useful video

@AroundTheHome1 6 ай бұрын

Glad it was helpful!

@richardh154 3 жыл бұрын

I had two drills where i needed to remove the chucks. I couldn't get the screw out this way, so i drilled a 4.2mm hole in the top of the screw and started to cut a thread in the hole with an m5 tap and that worked for me. then it was easy to take the chuck off.

@stephensmyth6363 Жыл бұрын

Wow , sounds like too much work

@hamaunahmadi5721 2 жыл бұрын

Nice thank for this video it helped me a lot that’s a nice video work perfectly fine

@AroundTheHome1 2 жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@jaydee3046 Жыл бұрын

My Craftsman model CMD710 needed a new chuck. went online for warranty replacement, and was sent a brand new drill, and charger. I figured "score" for me and ordered a new chuck figuring to gift out the new one. Used the craftsman site, and the chuck is available. Now things got interesting. Found out my drill has nothing to unscrew. Nothing there but what looks like the end of a shaft. The thread on the new chuck (ordered from Craftsman site) is regular direction. So how am I supposed to get off the old chuck? Do the same thing as normal with something in the chuck and whack it?

@AroundTheHome1 Жыл бұрын

I think so. Every drill I have had has a locking screw inside, but there is always a new model that changes something.

@JudgeBuster Жыл бұрын

So what do you do with a Milwaukee 1/2 inch chuck that has the bit teeth stuck and the chuck just spins and nothing happens?

@AroundTheHome1 Жыл бұрын

I honestly don't know. I would love to try and take one of those off because you are not the only person with that problem.

@dakSRT 2 жыл бұрын

Good video. I have 2 Milwaukee drills.. one for work and one for home that I wanted to swap chucks.. This is definitely not as easy as it looks. I could not get either chuck off. I got the screw out of one.. that's it.

@AroundTheHome1 2 жыл бұрын

Sometimes these things will fight you tooth and nail to get them off. If rust has started to build up inside the chuck, you are definitely in for a fight. Good luck man.

@rgbungee1420 Жыл бұрын

Wow thanks, my dad was so happy when he came back home from work and seeing his drill is chuckless lol he's been struggling for days to remove it until i watch this video and followed the step the hardest part was putting the screwdriver in because one of the chuck's teeth is broken and protruding making it hard and almost broke my wrist lol

@AroundTheHome1 Жыл бұрын

Yeah, sometimes those drills have a ton of torque. Sounds like you did a great job.

@rgbungee1420 Жыл бұрын

@@AroundTheHome1 yep he was proud of me and saved him to going to a repair shop and paying a hefty price but the downside is i got 4 blisters because of it lol but its worth it

@charlesscottkelly 10 ай бұрын

Cheers I have a hitachi that is hopeless since new

@Nomadcreations 2 жыл бұрын

You make It look simple. My Menards cordless Chuck is So shot a Hex Screwdriver Bit Holder spins in It, so Experimentation City is The Game

@AroundTheHome1 2 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Nomadcreations 2 жыл бұрын

@@AroundTheHome1 Thanx I tried getting My "So-Called" usable chuck loose & it turned out to be so stripped cogs I couldnt even get it off...

@simpliciocamirino2271 Жыл бұрын

thank you for that sharing sir,

@AroundTheHome1 Жыл бұрын

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@The52brandon 4 жыл бұрын

My chuck was on super tight that I needed to use a ratchet and adapter. And the screw required a T40 torx key. And then to add insult to injury, the screw that came with the Rohm chuck I chose is like 70% the diameter of the Milwaukee. I haven't gotten it completely off yet, so I can't comment on whether the post is different too. But it'll REALLY piss me off if it is. At which point I'll tear the drill down far enough to take it off and try to fix all that with my lathe

@AroundTheHome1 4 жыл бұрын

Is your Milwaukee drill a Fuel model? They use a different size chuck and different mounting screw.

@jjoseph1278 2 жыл бұрын

Just ordered from your link

@AroundTheHome1 2 жыл бұрын

Thank you so much. Totally appreciated. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@keithelliott8757 5 жыл бұрын

Thanks , God Bless

@AroundTheHome1 5 жыл бұрын

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@andrewmarsh4920 22 күн бұрын

I busted my middle finger after taking the screw out and attempt to use the vice-grip and the biggest hex key (6mm) that I could find my hands on. The vice grip slipped and by the time I had noticed the hex key had already struck my finger. Tip 1. after taking out the screw use wd-40 and wait 15mins for it to soak into the chuck's rod and it will come apart easily. 3 weeks until my finger heals. It's just a scratch still but I wanted to avoid it altogether. Use a decent pair of gloves too.

@t3s9 3 жыл бұрын

Thank you!!!

@AroundTheHome1 3 жыл бұрын

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@xxvodanhxx Жыл бұрын

So, this did remind me that the hammer action can break itself loose however. Most people are not as strong as this guy, and for some reason if your drill is still pushing full torque at the low setting, you can get hurt. I tried to hold the Allen wrench with my foot and it still slipped and hit my shin pretty hard, lucky it didn't crack my bone. I immediately remembered I had a metal pipe and steped on the drill with the pipe on the Allen wrench and it immediately came off. Nothing I did before that worked and I don't have a vise. Now trying to steal a chuck from a rigid drill for it but it just slips wont come off.

@AroundTheHome1 Жыл бұрын

Putting the Allen wrench in a pipe is a good idea to give you more leverage. Using a 1/2 or 3/8 galvanized pipe would probably do great. Many of these drills do have a lot of torque so it can get dangerous.

@stevenfromleicester2529 2 жыл бұрын

Would this be a standard procedure for most brand drills? I have a JCB drill and the chuck has a locking mechanism on it which is a nightmare to unlock so I want to switch it out for a no locking version

@AroundTheHome1 2 жыл бұрын

Yes, this will work on most drills. Can't say for them all, but this is a standard procedure to remove a chuck.

@marlonmoldez5739 2 жыл бұрын

Thanks

@AroundTheHome1 2 жыл бұрын

Thank you. I just checked my link in the description and it was no longer good. Here are the updated links. 1/2"-20 Rohm Keyless Chuck: www.amazon.com/Rohm-893350-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KGHY?crid=1UBSKNXQBLIZL&keywords=rohm+1%2F2-20+drill+chuck&qid=1656509535&sprefix=rohm+1%2F2%2Caps%2C102&sr=8-4&linkCode=ll1&tag=greatwhitenin-20&linkId=90c9f41675485fb455a264ec7b2cbecf&language=en_US&ref_=as_li_ss_tl 3/8"-24 Rohm Keyless Chuck: www.amazon.com/Rohm-893351-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KPPC?pd_rd_w=oQZOH&content-id=amzn1.sym.c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_p=c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_r=T3J9BEZMRK71CC9MRFRK&pd_rd_wg=TNPdm&pd_rd_r=7afef2da-06bc-4e9b-9a45-23e87828fdb2&pd_rd_i=B00DD7KPPC&psc=1&linkCode=ll1&tag=greatwhitenin-20&linkId=b07919f067e98bf41c4b1d1b571bba9f&language=en_US&ref_=as_li_ss_tl Now, my drill uses the 1/2"-20 but there is also a link for the 3/8"-24