Cordless Mitre Saw From Trend T18S

Cordless Mitre Saw From Trend T18S | Unboxing & Overview

Рет қаралды 6,659

Күн бұрын

Cordless Mitre Saw From Trend T18S | Unboxing & Overview
In this video I will be going through all the features that this mitre saw from Trend offers, I will also check how accurate it is and I will give you my initial thoughts on this tool.
For full review you will have to wait few months as I get more quality time with this saw. This will allow me to check if there are any issues with this saw, problems and how good is it overall.
How to Tune Up Your Mitre Saw- • Miter Saw Tune Up for ...
You can check this saw online just here:
Amazon - amzn.to/3Aw4yFr
Trend website - www.trend-uk.com/t18s-18v-cor...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #mitresaw
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Пікірлер: 46

@johnvodopija1743 2 жыл бұрын

Thanks for the video. I look forward to the follow up review after you’ve put it through it’s paces. Cheers 👍😎🇦🇺

@CasualDIY 2 жыл бұрын

Thank you kindly for watching 👍

@MikeWilliams-yp9kl 2 жыл бұрын

Great , can't wait to see your review and battery life Mike😎👍

@CasualDIY 2 жыл бұрын

Yes thats what I want to find out as well, how long does the battery will hold up

@ahmelmahay 2 жыл бұрын

you have a new subscriber from Ireland love your vids

@CasualDIY 2 жыл бұрын

Thank you kindly, welcome aboard 👍

@michaelowen335 2 жыл бұрын

Very well explained thank you 👍👍

@CasualDIY 2 жыл бұрын

Thank you for watching👍

@matthewtreby5779 2 жыл бұрын

Super review and I’m totally on the fence about battery or corded. Think I’m still think corded is better. But we shall see in the next review of this saw. 👍

@CasualDIY 2 жыл бұрын

I think I'm the same. Hence I need some proper time with this saw to make up my mind🤔

@darreng2167 Жыл бұрын

Great video. Just brought it yesterday from Screwfix bare tool £125.00

@CasualDIY Жыл бұрын

Thanks, hope it will serve you well👍

@tonyworkswood 2 жыл бұрын

Hi Tomasz. The saw looks like a quality item which I would expect being Trend. The price is on par in relation with other cordless top branded model's and battery power is definitely a good choice if your travelling around doing on site work as well in the workshop. It's worth a look. Tony

@CasualDIY 2 жыл бұрын

Definitely a saw that's should get some attention. Build quality is great👍

@boobye6305 Жыл бұрын

The batteries dont last long, terrible choice for site work... hobbyist tool at best

@idlersdream826 2 жыл бұрын

A quality looking saw Tomasz & good first review, but, as you say, if it's going to stay in a workshop better corded saws are available at that price 👍.

@CasualDIY 2 жыл бұрын

Yep. It all depends what you need 👍

@BrainFizz 2 жыл бұрын

For cut capacity… i put a video on my Instagram cutting a 4”by 3” door frame splice back in summer 2021 before the official product launch…..So you can get it to cut way more than the 51mm depth of cut stated

@CasualDIY 2 жыл бұрын

Cool I need to have a look at that thanks👍

@markduggan3451 2 жыл бұрын

Great video. Just a quick thought, now you have two compound mitre saws if you don't need both and you wanted to, you could always send me one lol

@CasualDIY 2 жыл бұрын

🤣 Well you never know I may do a giveaway at one point

@sizif717 2 жыл бұрын

Seems like a nice, portable mitre saw.

@CasualDIY 2 жыл бұрын

If portability is what you need then this will fit that bill perfectly 👍

@SteveMonk1956 2 жыл бұрын

Nice looking saw Tomasz, but out of my price range at the moment. Personally I prefer corded tools as there are no batteries to die and have to be replaced. But good review and thank you for posting it.

@CasualDIY 2 жыл бұрын

So far my thinking is similar, we shall see if this saw will change my mind over time 👍

@kanedNunable 2 жыл бұрын

im not so sure on how necessary a cordless mitre saw really is. and for that money you can get a corded dewalt or bosche etc.

@kanedNunable 2 жыл бұрын

@@CasualDIY i would be interested to know how this compares to your old evolution one.

@CasualDIY 2 жыл бұрын

@@kanedNunable if you don't need cordless then you can get a great corded saw for reasonable money. I'll most likely have the cordless evo in September

@carloduroni5629 2 жыл бұрын

I've just seen an unboxing of the corded mitre saw by Aldi and the details (but the battery, oviously) look identical.

@CasualDIY 2 жыл бұрын

Hmm I think the build quality should be a lot higher with the Trend saw tho

@kanedNunable 2 жыл бұрын

i want a new mitre saw but i also want it to be used for the odd sleeper or 100mm high cut, which really limits me it seems. the dewalt costs a fortune and the erbauer seems too big to lug around and takes up a monster amount of space.

@CasualDIY 2 жыл бұрын

Yes it will be fairly difficult to pick, I know that Evolution will be releasing a cordless range so that could be an option ?

@medic472 2 жыл бұрын

Maybe a dumb question, but when checking to see if the cuts were square to the base or fence, why would you only look for gaps? You could flip the cut piece and have no gaps but still be out of square. Why not show the results of the 45 degree cuts by putting a right angle square on it?

@CasualDIY 2 жыл бұрын

If the saw wasn't square, flipping the cut off piece will show that. For example you can see gaps at the top or bottom of the cut. That indicates where the saw is not square. When the 90 degrees is straight then rest of the cuts will be accurate as well. Unless there's something wrong with the saw. I just haven't thought of showing that on camera as it would not bring anything more to the video. The 45 degree is also fine if you are asking👍 can send you an email with a photo of it if you wish 👍

@medic472 2 жыл бұрын

@@CasualDIY I agree if it's held against a straight edge or a square. The purpose of your demonstration was to show if the saw cut as square as your earlier tests showed. All the cut showed me was that the saw cut straight. That's not the same as being square. Otherwise the demonstration was well done.

@stefanhummelink3662 2 жыл бұрын

I feel like the cut pieces need to be placed against a straight rule to act as the fence. By doing so, one can note the two cuts being out of parallel if the saw was not squared in the miter direction. If the saw cut is straight, but simply not on 0 degrees, you will not see gaps since you've not set the two reference edges in line. Hope that makes sense. Your test does however show how well the saw "tracks" along the cut.

@BrainFizz 2 жыл бұрын

@@stefanhummelink3662 a straight line is 180*….. if the cut is 90* one way, flipping it over gives you 90* the other side too…. If the cut gives say 89*, then the 89* flipped shows up the 2* left over as the gap. It’s just that simple. But yes the two pieces of wood need to pressed up against the fence or straight edge, otherwise your lining up two straight line cuts..

@stefanhummelink3662 2 жыл бұрын

@@BrainFizz Lol, offcourse the relative angles to the edge you referenced the cut of is like you say! But if you butt the two opposite edges together without a ruler against the initial reference edge to make it collinear, one will NEVER see a gap between the edges but instead a angled reference edge, which is not shown in this video. The concept of the check is absolutely correct, but the execution by CadualDIY was not entirely so. I wish I could draw it out here.

@TheLemartes 2 жыл бұрын

Trend has some amazing router tables and routers (ask them to send you some for testing :) *wink* *wink* )

@CasualDIY 2 жыл бұрын

Hehe they actually sent me a cordless router set and a cutter set. So I will be testing that. To be honest had a bit of play with it and so far I'm very impressed with it.