No video

Cordless Table Saw - DEWALT vs. Milwaukee

  Рет қаралды 261,186

A Concord Carpenter / ToolBoxBuzz

A Concord Carpenter / ToolBoxBuzz

Күн бұрын

Read detailed article here:
www.toolboxbuz...
We recently tested portable jobsite table saws in our Head-T0-Head to determine the Best Portable Jobsite Table Saw, however we excluded the cordless saws. In this head-to-head we’re pitting the two current cordless table saws against each other.
The DEWALT 60V FlexVolt DCS7485T1 8-1/4″ against the Milwaukee M18 2736-21HD 8-1/4″. While these two saws look pretty similar they certainly are powered using very different voltages with the DEWALT using a 60V MAX (54 volt) battery pack and motor and the Milwaukee using an 18 volt pack and motor. While they use different voltages, they were both tested with the same total battery pack energy of 216 watt-hours.
Table Saw Evaluation Format
Just like our previous corded table saw head to head we’re testing the cordless table saws in the same format. For this evaluation, we broke things into several categories including: Precision & Accuracy, Performance (power), Price, and Ergonomics.
Precision & Accuracy - In this category we evaluated the accuracy of the table saws straight out of the box, and how easy it is to make calibration adjustments. We also discuss the quality of the fence system as it relates to ripping accurate cuts.
Performance - The performance evaluation took a very deep dive into the power of the saw motors and how well the saws managed different ripping materials including plywood, pressure treated Southern Yellow Pine 5/4 decking and IPE 3/4 decking. We measured saw RPM’s and Amps for each of the cutting materials under constant feed rates.
Price - Price is always an important factor in determining which saw is best for a user. We’ve included the current pricing found online for each of the saws at the time of publication.
Ergonomics - Ergonomics are really important to users and an important category to consider when purchasing any power tool. In addition to traditional ergonomics, we also included functionality in this category.

Пікірлер: 514
@jokout1
@jokout1 4 жыл бұрын
Would love to see a new comparison test including the Metabo HPT 36V tablesaw! Recently replaced the old DW745 corded saw with the Metabo cordless saw and have to say I am completely blown away by the performance of this saw with the shop saw capacity (35" rip and 3 1/4" cut depth), power of a corded saw, (ripping thick hardwoods, no problem), and the available AC adapter cord is a great bonus feature! Not sure why none of the other manufacturers make an adapter available! Crew truck is now completely cordless...life is good!
@radar2119
@radar2119 6 жыл бұрын
Very interesting review. I went with DeWalt 60 volt about a year ago and just love the tools. But dang it was a hard choice. I'm happy that Milwaukee is still pushing the limits and making their line tempting.
@llsmith8271
@llsmith8271 5 жыл бұрын
If performance is very similair, I'll take red for the better features. My boss has the dewalt and its so annoying to move saw and stand around jobsites separately. Also of the 3 dewalt tablesaws I've used substantially, all 3 of em the rack and pinion gets sloppy very quickly and jumps teeth with a lil accidental nudge. Haven't used red yet to tell if it has same defect.
@SpeedisH94
@SpeedisH94 6 жыл бұрын
Yet another great review!! I appreciate your effort making this article and video. You are basically writing study-research papers every months. I came to your channel to re-check head to head table saw comparison before I make a purchase, And WOW. I found cordlesses. I'm not sure those will be released and comes with same spec in my country, since there is only 18v battery being sold from DeWalt. There is no 20v battery here in Korea(south). But Anyway, good to know more options. My primary concerns are Accuracy, safety, and noise. since safety would not be differ so much, accuracy and noise is my major concerns for this comparison. But I could not find noise factor not like your past comparison video. That was unlucky for me.
@redrhino3041
@redrhino3041 5 жыл бұрын
You have a quality channel with actual tests.
@WrenchAddiction
@WrenchAddiction 6 жыл бұрын
Looks to me like Milwaukee simply copied the DeWALT saw. I’d like to see DeWALT increase the blade size to 10”, utilize two FlexVolt battery packs & include 120v adaptor 👍🏻
@Cisco8484
@Cisco8484 6 жыл бұрын
Milwaukee had the advantage of being second to market
@WrenchAddiction
@WrenchAddiction 6 жыл бұрын
Cisco8484 and lacks innovation of their own
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Ryan Brown don’t think they’ll do that
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Cisco8484 yup
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Yes of course - and they didn't CRUSH it, which surprised me
@slappydoolittle7329
@slappydoolittle7329 5 жыл бұрын
The difference in results would hardly matter unless your building cabinets on your front lawn. For me; is one saw so much better than the other that it is worth investing in a different battery system - which is the bulk of the cost in my eyes. The answer is a resounding no. Good honest review. Perspective people. Perspective. Deep breaths.
@korlimservices4180
@korlimservices4180 5 жыл бұрын
Maybe the Metabo Cordless Table Saw ? It has the ac/dc battery charger included !! Battery run out ? just plug it in and continue working !!
@bklyn2va2dc
@bklyn2va2dc 4 жыл бұрын
Well said
@tylersineath
@tylersineath 6 жыл бұрын
Much respect for both big names already got all my money invested in dewalt but my co worker has Milwaukee and I enjoy using all the tools. Good vid rob
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Thanks Tyler - what brand bow is that? I have a Mathews - love it
@tylersineath
@tylersineath 6 жыл бұрын
@@ConcordCarpenter it's a grizzly number 2 model love that thing. Right on rob.
@22duke
@22duke 6 жыл бұрын
Once again Rob. You have made an heck of a good review with trust worthy facts and in-depth examination of those 2 cordless table saws. After your first review, which I have seen over and over 🤓 I got my Milwaukee table saw, last week (guess I was among the first here in Denmark to get it) and what a great little handy powerhouse. Guys at the Job-site stood in line to tried it and to compare it with their one or two year older corded Dewalt table saw, and boy they were impressed, and so I am. The only little thing, is that the extruded aluminum profile, the fence, should have been a little thicker in the material. It feels a bit flimsy. But besides that, it’s a keeper 👍🏼
@12345nicke12345
@12345nicke12345 6 жыл бұрын
jeg er også fra danmark må man spørge hvor din sav er købt :)
@22duke
@22duke 6 жыл бұрын
Nicklas Jensen Bygma i Viby, Jylland.
@JJ-lu6mg
@JJ-lu6mg 6 жыл бұрын
Thanks Rob for taking your own time to do theses great tool reviews. 👍🏼🛠
@jameswang4349
@jameswang4349 5 жыл бұрын
As good as always. I am interested to see the negative ones in the comment area with loads of ideas to actually do some hard work and make a video that can give us some 'good ideas' than just teaching others. Great job Rob.
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
James Wang thx brother
@steverichens4242
@steverichens4242 Жыл бұрын
Wonderful review. I was amazed at the detail and how in-depth you went on all the precision stuff. Most of my tools are primarily Dewalt and Milwaukee. I probably would have went with Dewalt but then when I saw your review I realize that the ease of cutting and the simplicity part plays a big factor in how much you enjoy the work you do. Most of my batteries and chargers are Milwaukee so that would be my choice……!! Thank you very much
@jamesf4244
@jamesf4244 3 жыл бұрын
I feel like each saw you buy will vary in out of box accuracy and top flatness, every Dewalt will have varying readings as will every Milwaukee saw.
@libertarian1637
@libertarian1637 3 жыл бұрын
DeWalt makes a 15 Amp, 180 Watt power bank that runs off (4) 20/60 Volt batteries. I run my 10” DeWalt table saw off that without a problem. The power bank doubles as a quad battery charger. I have an accessory fence built onto my saw which holds a 2 1/4 HP router cradle and functions as a router table; the power bank runs thus as well, though not at the same time. I’ve never bogged the power bank down and have used it to cut dados as well as ripping. (4) 5 Amp Hour batteries will run the saw continuously for about 15-20 minutes, depending on temperature. Just an option if you want a full size saw to run off batteries. These power banks are great as I have plenty of batteries to run these and they make near zero noise; working with these beats working with a generator, especially indoors without power.
@e39Moitas
@e39Moitas 6 жыл бұрын
Great comparison! I own the Dewalt saw but mine does not have the same riving knife lock. I don't have to remove the plate to get get to the lock, it's positioned at the same location as the Milwaukee so I can reach in from behind the saw and unscrew it and pull my knife off. I also want to add my view on the battery platform dilemma. Sure, you need flexvolt batteries to run the Dewalt but can use them on several 20v max tools despite the extra weight. The Milwaukee basically need the 12.0ah battery to perform like it's designed to do (from what I've heard) so if you think about it you kind of need those big batteries for that saw. Think about that folks and compare the situation with Dewalt. I'm not saying either one of them are a winner in that category, more that they are not that different from each other.
@waynewilliams5353
@waynewilliams5353 2 жыл бұрын
You need the flex volt to run the Dewalt as well. Difference being I can slap the M18 12ah on any of my Milwaukee tools. It’ll run my impacts, multitools, miter, nail guns, router, sawzall, jigsaw, sander, etc. Every piece is interchangeable. And for once…it’s cheaper with all those features than Dewalt. I was always big on Dewalt until I was continuously getting screwed by trash batteries that would go bad just out of warranty range, and brittle hand grips. That’s why I went red. An employee Dropping a whole tool bin off a 3 story roof and every tool still kicking is why I will remain red. I’ve never had to do a warranty exchange to date…knock on wood
@cajunice3588
@cajunice3588 5 жыл бұрын
Ive had a dewalt for awhile and just recently got the milwaukee they are about the same except i have milwaukee tools already so i have more batteries for it both are just awesome
@rbondy008
@rbondy008 6 жыл бұрын
My favourite channel from all my subs. Cheers Rob, keep up the great work.
@volsfan445
@volsfan445 5 жыл бұрын
What I got out of this is if you want accurate cuts then dont get the Milwaukee. . . . Last i checked nothing else matters if your cuts are off
@electricalron
@electricalron 5 жыл бұрын
Terrific review. I'm an electrician so for now I am set with my corded Dewalt table saw. However, all of my cordless tools are Milwaukee so when the time comes I will be going with the M18 platform for cordless table saws.
@marcotabora1616
@marcotabora1616 4 жыл бұрын
This guy always talks good things about each tool, never talks about the defects
@jnunes246
@jnunes246 6 жыл бұрын
You guys are the best in tool review
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Thanks - please share the video
@shakeNbakestudios
@shakeNbakestudios 5 жыл бұрын
Youve obviously never seen a video from Ave
@TAShannon1
@TAShannon1 5 жыл бұрын
I needed a cordless table saw and narrowed it down to these two. I ended up going with the Milwaukee. My first job for it was a 24X16 pergola and it needed slats cut out of 2X8's. In all I had to cut approximately 700-800 linear feet of 2x8 pressure treated. I did all of this on less than 2-1/2 charges so I don't understand where the difference is on the way I cut vs this video. Maybe because I never left it on in between cuts, not sure. I cannot speak for the DeWalt but this Milwaukee is phenomenal. It outperforms my 15 amp corded by a mile. Just getting silly with it I tried to see how fast I could feed the 12' 2X8. I realized that it would cut it as fast as I could feed it. From my experience the table saw will actually be pulled over onto the ground before it would bog down much less stop the blade. Loads of power, absolutely no complaints. This saw cuts very well. The features are very nice as well
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
Your best Friend probably because we performed our test all at one time, You probably use it over the course of the day or several days
@gungadinn
@gungadinn 6 жыл бұрын
Appreciate the review. A major point that you omitted was the warranty of the tools. DeWalt has a 3 year warranty, the Milwaukee a 5 year warranty. That's huge for a tool. You are correct in that DeWalt doesn't offer the saw as a kit. What you omitted was the cost of a battery charger for the DeWalt saw. The chargers I find listed run $85 on top of the price of saw, stand and battery bringing the Dewalt total cost to $747.99. With the Milwaukee, I'm unable to locate any of the 18v 12 amp hour batteries. The saw is listed @$549 and the stand for another $79. for a total of $628.
@mlindholm
@mlindholm 6 жыл бұрын
Gunga Dinn well y'all are leaving some information out. The Dewalt is available as a kit, DCS7485T1, but it only comes with the 6Ah battery and charger, for $499. The stand is $74.99. I don't think they offer a 12Ah table saw kit yet. They never did offer it in 9Ah, those were for the outdoor power equipment.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Thanks!
@toddfratzel3569
@toddfratzel3569 6 жыл бұрын
Pricing is always tough for us as it's a moving target. We try to find the best pricing at the time we write the article. This morning I looked both up again and I get $628 for Milwaukee ($549 plus $79). For DEWALT you can get the bare saw for $340, stand $75, battery $249, and $46 for charger for a total of $710.
@boosted2.4_sky
@boosted2.4_sky 6 жыл бұрын
The warranty is why Milwaukee charges an arm and a leg for their tool line.... Your paying for the duds that get replaced (to other people) up front.... it's simple marketing. ... That's all
@aetorres7422
@aetorres7422 10 ай бұрын
The smoother cut has to do with what blades are using
@BTom16
@BTom16 4 жыл бұрын
Another outstanding comparison by Concord Carpenter. This is the best tool review channel on the net.
@MrTHEBRITINWA
@MrTHEBRITINWA 3 жыл бұрын
Clear, concise and real. Two thumbs up m8
@jamesparker54
@jamesparker54 5 жыл бұрын
Really appreciate your tool reviews. They are very informing.
@chrisE815
@chrisE815 4 жыл бұрын
I'm disappointed Makita hasn't released a cordless table saw yet. I'm looking for a reason to invest in the Makita 18v line because I love the X2 system. If they release a competitive saw in X2, I'll buy it! Always look forward to your excellent, data-driven reviews!
@ConcordCarpenter
@ConcordCarpenter 4 жыл бұрын
Chris N thanks I’m betting they’ll release on soon
@Thejay120
@Thejay120 Жыл бұрын
Yeah nah
@82camino96
@82camino96 6 жыл бұрын
Just what I wanted to see Rob! I just got the Milwaukee a few days ago and I love it.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Awesome - you'll like it!
@82camino96
@82camino96 6 жыл бұрын
A Concord Carpenter / ToolBoxBuzz thank you sir. One question, where do they offerit for 549$ with the stand? I don’t see that deal with HD or anywhere else after minimal searching. Thanks again.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Not sure - Todd [my partner] looked that info up. Ill ask him
@toddfratzel3569
@toddfratzel3569 6 жыл бұрын
There was a promo for a free stand when I was writing the article. I can't seem to find it now, so it looks like that's going to be an accessory for extra $
@82camino96
@82camino96 6 жыл бұрын
Hey Tool Box Buzz thank you both for following up on that, it’s greatly appreciated. You guys are awesome... I wondered how I could have overlooked that deal so now it makes sense. Always enjoy your content and reviews guys.
@joemontague7404
@joemontague7404 6 жыл бұрын
Awesome job as always guys!!! Thanks for the reviews
@tonyrichard8078
@tonyrichard8078 6 жыл бұрын
Where you able to make adjustments to the Milwaukee to fix the 89 degrees and 46 degree settings instead of being 90 and 45 degrees?
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Yes - all saws were adjusted. Easy
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
yes - easy
@Mike-wh9dq
@Mike-wh9dq 3 жыл бұрын
After tuning each saw was the accuracy of the Milwaukee as good as Dewalt, or still "not as accurate" ? Thanks.
@groot5441
@groot5441 2 жыл бұрын
With addition of dado blade ability Milwaukee is the winner to this guy .
@godfatherfeederfather6350
@godfatherfeederfather6350 3 жыл бұрын
I'm new to wood working so this helps. From what I take it comes down to user preferences.
@martinoamello3017
@martinoamello3017 3 жыл бұрын
Thanks for the reviews. I'm strongly considering both saws for job site work. Our shop saw is a Laguna Fusion 3 so no extra need there, but out on jobs nobody in their right minds would drag a 800 pound saw along. I'm not so worried about run time as I'm seldom going to be cutting lumber all day outside of the shop, but accuracy and user fatigue are also important.. I REALLY don't care about the color nor name recognition, only results and how my old body responds.
@ConcordCarpenter
@ConcordCarpenter 3 жыл бұрын
Right on
@michaelrogers4285
@michaelrogers4285 4 жыл бұрын
Great tests Rob as usual 👍. Thank you for all you do 👍
@jcmoye1
@jcmoye1 3 жыл бұрын
Milwaukee all day Baby!!! Last longer
@wiredperformance6130
@wiredperformance6130 2 жыл бұрын
I have the corded dewalt. No complaints. I couldn’t find any Milwaukee dealers within 100 miles of me. Milwaukee could borrow me a saw but still hasn’t! Lol! Nice video thanks for the info!
@jameselam8263
@jameselam8263 4 жыл бұрын
I've never trusted the accuracy of the fence or a blade so I check both often.
@bheckel1
@bheckel1 6 жыл бұрын
With inverter tech being included inside almost every high end cordless tool. Battery voltage is almost irrelevant. Measure voltage at the motor. Is it 3 phase ac? 60v will help to keep the battaery cool while delivering the same wattage. M18hc batteries do it about the same. Very nice job on the blade part. This video would be the best if I was going to get a battery table saw. Thank you for this.
@garethheathcote4988
@garethheathcote4988 4 жыл бұрын
I use DeWalt but have nothing against Milwaukee in really suprised at Milwaukee,s lack of accuracy here. The blade being a degree out of whack is not acceptable, I would have thought that both of these top brands would be bang on tbh. Thanks for the video 👍🙂
@bhepp344
@bhepp344 3 жыл бұрын
Hi Rob, I love all your videos! I always see your reviews before I jump on a new tool. I’m a Milwaukee guy. I’m probably buying one on Wednesday. Will it cut well with a 9 .0 or 5.0 battery? I’m debating on just going for bare tool to save a few $.
@ConcordCarpenter
@ConcordCarpenter 3 жыл бұрын
Yes it will
@krizm
@krizm 5 жыл бұрын
tough choice, I've been makita, but looking to change to milwaukee but have always had miter and table saws of dewalt
@slicktype001
@slicktype001 6 жыл бұрын
Thought this channel was dead..... good to see you back on the ball!
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Dead - why because I took some time off during the summer? Don't you follow us on FB or IG? We're pretty busy
@damionbrown1176
@damionbrown1176 2 жыл бұрын
What matters most is the power of the saw everything else can be adjusted
@byronc7284
@byronc7284 6 жыл бұрын
I love my dewalt saw but my saw was way out of wack in many ways. No big deal, i calibrated it my self. Now its pretty good.
@fatherfirefighter7751
@fatherfirefighter7751 5 жыл бұрын
I'm a Milwaukee guy.........DeWalt took this one fair and square,disappointed in the red team.
@bloodseedrums
@bloodseedrums 4 жыл бұрын
i can handle 20 minutes of adjusting the factory stops, can you not?
@kenbarwell3261
@kenbarwell3261 4 жыл бұрын
I’m a Dewalt and Milwaukee guy both. I buy tools based on performance not the brand. I really like my Milwaukee table saw
@mrniusi11
@mrniusi11 4 жыл бұрын
@@kenbarwell3261 Really appreciate the guys that go for performance over fanboyism.
@altokers
@altokers 9 ай бұрын
It's kind of crazy that the milwaukee has comparable or even better power even though its a 18 vs 60v system. You'd think the dewalt would easily pull away considering that's how it is on the circular saws.
@wildgoose6596
@wildgoose6596 6 жыл бұрын
Great review Rob! And interesting comments by others as well. I'm a bit surprised by the price difference since the Dewalt has been out longer, one would have thought they would drop the price to compete. On the other hand maybe Milwaukee is paying a bit of a penalty for being late to market and trying to gobble up some market share with the lower price point.
@toddfratzel3569
@toddfratzel3569 6 жыл бұрын
Most likely this is due to how they are kitted. The DEWALT kit has been out with a smaller pack for quite some time. We shall see if they update the kit with a 12 ah pack and keep the lower price.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
I think they're losing money to come in lower - my opinion
@DoresoomReviews
@DoresoomReviews 6 жыл бұрын
Great review Rob! Thanks for taking the time to be so thorough.
@FancyPantsFiles
@FancyPantsFiles 4 жыл бұрын
Its amazing how much buying into the m18 line changed my work life. Started out as a humble apprentice asking what my lead would recommend for an impact driver. He said, 'Always Milwaukee, always' So I bought it and now have a cordless impact, drill, multi tool, fan, radio, might look into their cordless 18g nailer as well. All from that one recommendation a few years back. I can honestly say that the m18 line hasn't let me down. I love that they just keep expanding it with new tools. Excited to see their cordless framing nailer finally hit the market (after numerous delays)
@debandmike3380
@debandmike3380 2 жыл бұрын
You're comparing an initial set up of a single saw from each manufacture. That's completely random. My Milwaukee was perfect out of the box and I have a Dewalt corded saw that needed adjustment. Try these tests on 100 of each and you will find they're both probably exactly the same in terms of average out of the box set up. Both saws offer easy to do complete adjustments for calibration and that's all that matters. I am super impressed with my milwaukee the blade that comes with it is amazing for a default blade. Wood goes through it like its styrofoam. I bought a Freud thin kerf but haven't really had the need to put it on yet.
@MrDINODINO74
@MrDINODINO74 6 жыл бұрын
... very good review, nice job Chief, thanks for the you effort. I like you are impartial, and brush both providers . ... in till next time... all the best for you and your crew
@MrDINODINO74
@MrDINODINO74 6 жыл бұрын
... ... if you take into account that the devalt has only 4 amp , by far dewalt has a higher number of cuts when you consume 12 amps like Milwaukee . I do not think it would really matter, did you also calculate the working speed?
@MrDINODINO74
@MrDINODINO74 6 жыл бұрын
may be dewalt realize that two batteries are needed because in the UK it sells the kit table saw with 2 batteriens of 2 amps and fast charger with a price of up to 700 pounds , I was lucky , I have to paid 580 pounds on the kit .
@petybrown4668
@petybrown4668 6 жыл бұрын
Great review, I waiting to get my new Milwaukee saw, I have the 18 volt platform and all my tools are Milwaukee! Every tool has is pro and cons, perfection is hard to find.Thanks for posting this video!
@loucifer323
@loucifer323 6 жыл бұрын
It looks like Milwaukee just copied Dewalt and made minor adjustments, but I know Dewalt they will improve on those and talking to a electrician low voltage and high amp is a dangerous pair as in you'll run into trouble down the road but that said Milwaukee made a nice saw they're both nice, but I'll wait for the Dewalt 10in 120v saw to come out with corded option
@reddawgrup1779
@reddawgrup1779 6 жыл бұрын
Lou Cifer... Damn it somebody copied the tires on my truck... Lol
@reddawgrup1779
@reddawgrup1779 6 жыл бұрын
Yea will be interesting to see what other improvements both saws come up with for the next round. Hopefully both have worthy improvements.
@renaissancemen1
@renaissancemen1 6 жыл бұрын
Lou Cifer!!!! My brother in the Devils Den. Buy the DeWalt. They deserve it just for doing it first and better!!!! How can you copy a tool Red China and not blow it out of the water???? Innovative much Milwaukee?
@reddawgrup1779
@reddawgrup1779 6 жыл бұрын
Renaissance Man... Where you think Dewalt is made? Do your re...... search.. You know... not just google... Slap a sticker plate on, then claim its made in the home country... Wake up man... Unfortunately you're 20 years to late..
@reddawgrup1779
@reddawgrup1779 6 жыл бұрын
David P... Damn that's a good deal you got on that baby!!
@philipdove1705
@philipdove1705 6 жыл бұрын
10" blade would a be nice standardization for both cordless saws
@jamesparker54
@jamesparker54 5 жыл бұрын
I have used both quite a bit love the milwaukee.
@reddawgrup1779
@reddawgrup1779 6 жыл бұрын
If the plastic gear on the rip fence adjustment becomes a problem... Well then you don't have a clue on how to use or care for a saw! It's not like there's major pressure or hardly any type of pressure on it period. No doubt a long time down the road that plastic will wear out before metal, but by that time 95 percent of the ppl will have a newer saw. To framer joe.. I ran 4 framing crews and had all Dewalt drills and impacts and not some but all of them burned up, switched to Bosch and Milwaukee for a period of time and lost some of the bosch and every so often got a dude Milwaukee, but far and away the Milwaukee's stand the test of time. Now that's my experience. Now I'm no fan boi, I buy what I feel is the best for the job I'm doing. But why some of you feel the need to post and repost in video after video about the same things.. I don't get it. Certainly free to do so like everyone else tho. I just don't get it. Message boards the same thing too... My tool is better than yours... Lol. Oh well. Thanks for the info and review Rob!! Good stuff. 👍
@Displays.1234.
@Displays.1234. Жыл бұрын
Matika need to make a good version of these two.... If you are invested in the 40 volt platform....
@kenfokart5755
@kenfokart5755 6 жыл бұрын
Cordless tools should be tested to their torque limit, it is the most important test on the jobsite, some of my flexvolt tools have pushed away my need for corded tool so far that I don't even take them with me anymore. My colleges on 18v can't do that as 18v will simply not have the torque required to get the job done in some situations. You can always have more batteries and chargers to keep up with your need, but you can't add more power to your tool. I want to see what makes the Milwaukee stall (its limit) and try it on the dewalt. It could be similar as Milwaukee is extremely surprising on 18v, but I doubt it as the circular saws are black and white. "It does everything you need, and more" the "and more" is what matters to me because when you realise your cordless tool can't do it and you have to pull out the corded one and run a power cord, it is a failure in every single way. if a brand can do stop that, it's a win.
@georgeb.wolffsohn30
@georgeb.wolffsohn30 4 жыл бұрын
What about flatness of blade used for the test and straightness or flatness of the rip fence ?
@kananijames8488
@kananijames8488 5 жыл бұрын
Good video I would just say that millwauke had 2 years to pick apart Dewalt for as close as they are I would go Dewalt
@TheDirtyBirchTrails
@TheDirtyBirchTrails 5 жыл бұрын
Old video but love it. I never thought about a cordless table saw !!
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
MBR not that old 8 months
@guranatumae7672
@guranatumae7672 4 жыл бұрын
wow what a really great professional review! thank you, keep it up! subscribed!
@fladude38
@fladude38 3 жыл бұрын
Glad to see you are a fan of the Bluetooth connect function :)
@robsdeviceunknown
@robsdeviceunknown 6 жыл бұрын
Boy I need a table saw. I have one thats old, out of whack and dangerous. No riving knife or shroud and bent fence. But that's ok. Thank God I have it. I just have to be extra careful. I was hoping DeWalt would release a table saw like their miter saw, corded AND cordless. I have many DeWalt tools, and NO Milwaukee. I won't buy them due to their cult following and over price. Kind of like Apple owners lol Thank you Rob for yet another great review that i can trust.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Dewalt told us that annoying an AC/DC component would add significant weight to the saw and at least $100 more in cost - I'd pay it!!!
@renaissancemen1
@renaissancemen1 6 жыл бұрын
A Concord Carpenter / ToolBoxBuzz NO DOUBT!!!!!! Why didn’t they do this???? They act like $100 is going to break us. It’s the cost of a battery. Stupid move.
@engjds
@engjds 2 жыл бұрын
Anyone know if the rip guard/stop/work guide on the dewalt is compatible with the Milwaukee? they look very similar.
@babj615
@babj615 4 жыл бұрын
No mention of tool and battery warranty or durability over time, both very important. I already have both M18 and FlexVolt tools, so which is better now?
@chadrockman1762
@chadrockman1762 6 жыл бұрын
Very nice review you truly are a professional, keep up the excellent work👍
@affromma
@affromma 6 жыл бұрын
Quite a thorough review. It would be interesting to learn the variability between units from the same manufacturer. There's always a chance another pairing would yield the opposite results ... QC departments know that confidence levels depend on sample size.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Yep of course - were not UL laboratories
@toddfratzel3569
@toddfratzel3569 6 жыл бұрын
Especially when you look closely at how close these two units were in the measurements. There was NO big differences in anything we measured.
@lodewijkbergkotte260
@lodewijkbergkotte260 4 жыл бұрын
On features i missed the max rip cut capacity.. are those similar?
@ysteinhindenes642
@ysteinhindenes642 6 жыл бұрын
Awesome review! I got the dewalt one a few weeks ago. I admit I was a bit sceptical about the run-time and performance, but the saw performs just as well as a corded one - Amazing! I use it with my two flexvolt 9 Ah batteries, which is good enough for most of the days. I learned fast that starting the day with two fully charged batteries was very crucial, when the saw was needed. Overall very happy with it, strongly recommend it. Go cordless!
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
9.0 is a great battery and will serve you well
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Great saw - been using it since they came out with it - its a job site game changer!! #Visionary #TrendSetter
@noamavrahamdudai8306
@noamavrahamdudai8306 6 жыл бұрын
Perfect review rob ... You got all the points up... But maybe we should hear the motors work with 2/4 to hear which smoother Thanks a lot
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Interesting and good point. Maybe I can do a short video showing that - I have the clips
@noamavrahamdudai8306
@noamavrahamdudai8306 6 жыл бұрын
A Concord Carpenter / ToolBoxBuzz look forward to that Rob the pro
@benjaminromshak9904
@benjaminromshak9904 5 жыл бұрын
Would like to have seen the metabo HPT cordless/corded multivolt table saw up against these two. Wasn’t released yet but maybe a round two? Btw awesome review as always🤟🏼
@spilleradam
@spilleradam 3 жыл бұрын
I think that’s a good saw, because you can plug it into the mains as well.
@stevenfoust3782
@stevenfoust3782 5 жыл бұрын
Sounds like Milwaukee is better simply because of the smoother motor technology that leads to better glue line cuts. I have a Dewalt 10" corded model, no matter the blade there still are saw blade marks left in the cut. Shop saw does not have that problem.
@innarlilleorg6919
@innarlilleorg6919 3 жыл бұрын
1.Just removed the spring on safety switch and your problem is solved. 2. On the Dewalt all metal gears vs Milwaukee metal and plastik. 3. Stand. Milwaukee stand dont fold all the way and stays little bit like X. Dewalt folds all the way and stays like I. 4. Fence storage. Alot better on DeWalt. Dewalt engineers have been thinking.
@duggiestone
@duggiestone 5 жыл бұрын
I’m one of those guys that got screwed by Dewalt when they abandoned the 18V platform for the 20V. Now they introduce the Flexvolt. I understand it’s backward compatible with the 20V, but they made a lot of us gun-shy with their past behavior. I like Milwaukee’s commitment to their 18V platform, which looks like they will support for a long time. Dewalt keeps playing the marketing game, but changes the battery platform to do it. Too risky.
@markostefanac
@markostefanac 2 жыл бұрын
Why you dont use sliding part of table saw ? You dont need miter saw if you have sliding part with angle setup.
@carpenterone3
@carpenterone3 6 жыл бұрын
I might’ve missed it but the Milwaukee has better dust collection correct? And if I’m not mistaken the Dewalt only has one miter slot compared to the Milwaukee that has two which might be a big deal for some people. Good review nonetheless as usual Rob
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Carpenter One3 Milwaukee did better in dust but it was negligible - yes 2 miter slots
@zachlyons4952
@zachlyons4952 5 жыл бұрын
Milwaukee needs to go back to the drawing board if the 45 and 90 aren't true
@mitchharland7795
@mitchharland7795 4 жыл бұрын
pretty standard for most Milwaukee gear unfortunately, they're heaps powerful and good to use but the accuracy has always been lacking
@ryanwelty2725
@ryanwelty2725 4 жыл бұрын
You should be manually confirming angle regardless if the angle tolerance is critical.
@emilioretana3333
@emilioretana3333 5 жыл бұрын
thanks bud, I was about to buy the milwakee but you made up my mind and just bough the dewalt
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
Emilio Retana glad to have helped!
@gooseseey4687
@gooseseey4687 3 жыл бұрын
If you could only pick one, and you didn’t own either brands (I’m a Makita guy) which would you go with?
@Kingkong22335
@Kingkong22335 6 жыл бұрын
Hello do you have a video on electric hand planers… I could not find one in your past videos and I love the amount of information you give before I make a purchase. Also please keep making these great videos , it's refreshing to get an unbiased opinion.
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
katoz111 I reviewed the corded BOSCH and cordless Milwaukee
@Kingkong22335
@Kingkong22335 6 жыл бұрын
@@ConcordCarpenter thanks!
@olegvihodet4104
@olegvihodet4104 5 жыл бұрын
an year ago I bought Milwaukee cordless table saw and I dont use corded after
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
Oleg Vihodet me either!
@ztej
@ztej 6 жыл бұрын
Yeah dewalt is suppose to come out with a newer cordless saw that addresses the blade slowing down as the battery depletes I'd wait till the newer dewalt cordless table saw comes out those 8inch blades are a hindrance put a 7 1/4 on there lol or have a multi spectral platform that isn't necessarily so restricted on the fact that it's a tiny box with a blade I mean that they could come out a much larger platform that makes these look like there for trim only
@frontierman23
@frontierman23 4 жыл бұрын
One thing as a person who uses a sled very often the Milwaukee saw has 2 channels as opposed to dewalt only having one channel. It makes your sled slide much easier.
@pianobar7801
@pianobar7801 3 жыл бұрын
I have a milwaukee m18 table saw. I was wondering if I can put it in 10 inch blade to replace my 8 1/4 blade? I'm sure lots of viewers would liked know if this can be done. Thanks for posting.
@lonespartan31289
@lonespartan31289 6 жыл бұрын
wonder how long it will take Makita to get one of these on the market. I love my Makita tools but it sure seems like they drag their feet getting new tools on the market
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Soon
@trakyboy5128
@trakyboy5128 6 жыл бұрын
Me too !!! I wish Makita would spend more time out in the field. Actually talk with us...do surveys from Makita guys like us ( love the blue ) then go to the drawing board armed with real info. Kit and no kit like always..1,2 or even 3 batteries.whatever. cordless really isn't about run time.but nice.. it's ease, convenience,in and out..if i want run time I'll drag out the corded bad boys. Function, accuracy and in this case debris control along with longevity. 😋😀
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
They do go into the field. Makita WILL NOT change their platform. My guess is they will do an X2 saw - #Hoping #FingersCrossed
@82camino96
@82camino96 6 жыл бұрын
Tracy Kooken yeah I’m with you there on Makita. I’m in pretty much every platform but Dewalt and I’ve grown very fond of my Japanese based tools. When I got into Makita, I immediately fell in love with their drills and drivers at first use. Which lead me to the X2 miter saw, which I love. Just so nicely built. When I got into Hitachi recently, I fell in love with their triple hammer, brushless drills, cordless nailers and especially their compact 3ah battery. The other brands absolutely need to follow suit on that battery... I often do wish that Makita would join the competition on a closer level these days though. BUT, sometimes I wonder if Makita is just sticking to their guns as a slow and steady competitor that never changes, never gets overzealous and very rarely falls short on their products. They’ve been around for so long, owned by the same people, and they make very well performing and enjoyable tools to own and use. Ergonomics and pleasure of use are a highlight for Makita in my opinion. Maybe they’re just laughing in the background as this crazy technological brand to brand ruckus that’s going on lately. When they do drop a new tool, it’s usually something special but it would be great if they’d pick up the pace a bit right now though. They absolutely NEED to bring out some bigger batteries for crying out loud. I run through 4-5ah packs on my miter saw in a busy day of laying decking... I love my Milwaukee tools as well but my impacts just feel to thumpy after using Makita. I realized this summer that I’m much happier and content being in MANY brands, picking whichever tool I want from either brands offerings. I have nothing against Dewalt, in fact I’d like to enter their platform, there just hasn’t been the need for me yet. I was very close to using the table saw as my ticket into the yellow but ended up buying the M18 on a whim the other day. Seemed like the right choice with all the batteries and chargers I already have.
@MovingToMnPro
@MovingToMnPro 5 жыл бұрын
I sure would like to see a Makita 2x18, as I really love Makita tools, but considering their corded tablesaw pricing (twice the competition!) I don't think I'd get it. As it is, I'm waiting for a big sales promotion on either the Milwaukee or the DeWalt.
@1barticus
@1barticus 6 жыл бұрын
I install wood flooring for 35 years and just bought the flex volt saw and love it, now if someone would come up with a cordless floor nailer I'd be set. Hint hint
@jjonescatch21
@jjonescatch21 6 жыл бұрын
1barticus hey man, dewalt does have a cordless flooring stapler www.dewalt.com/products/power-tools/nailers-and-staplers/staplers/20v-max-xr-18-ga-cordless-flooring-stapler/dcn682m1
@loucifer323
@loucifer323 4 жыл бұрын
Dewalt has a cordless floor nailer
@Solerius1990
@Solerius1990 4 жыл бұрын
But all this measures about precision was taken out of the box so, it can be fixed, isn't it? I'm a beginner on carpentry and i was thinking to buy this table saw, because all my tools are Milwaukee, do you recommend it anyway? Please tell me yes hahaha
@tyclute1454
@tyclute1454 4 жыл бұрын
Great Reveiw. Can you run the dewalt on standard 20 volt batteries or must it be a flex volt?
@ConcordCarpenter
@ConcordCarpenter 4 жыл бұрын
flexvolt only
@johncarne4884
@johncarne4884 4 жыл бұрын
Great video rob than you for your hard work do you have any experience with the Metabo 36volt x2 saw and if you do how does it compare to these
@dcselwitz
@dcselwitz 3 жыл бұрын
Excellent review! Thank you sir!
@unclefester4626
@unclefester4626 3 жыл бұрын
Thanks for doing this review!!!
@JasonShowell
@JasonShowell 6 жыл бұрын
As expected, it looks like Dewalt set the bar and milwaukee have met it with a few extra tweaks 2 years later. I will be very interested to see the next revision from Dewalt and to see who else steps into the arena with them.
@loucifer323
@loucifer323 4 жыл бұрын
Dewalt will make adjustments to this saw and you won't even know because never say anything
@SuperPhoReal
@SuperPhoReal 2 жыл бұрын
@@loucifer323 more like they’re gonna raise the price and keep feature missing without saying anything. For example their dws779 miter saw. Type 22 is missing more features than their type 20 production.
@traviswalker007
@traviswalker007 3 жыл бұрын
Why would you think the dewalt stop switch is a bad design? it keeps you from trying to hurry up and cutting a finger off. I think its great, It makes you realize for a split second take your time. So I do not think its a design flaw compared to Milwaukee, In my opinion every saw should have that feature!!
@chrisruthford4492
@chrisruthford4492 5 жыл бұрын
I'd like to see these tools tested on a 108 degree day in Texas constantly ripping 3/4 hardwood. See which one catches on fire first.
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
Chris Ruthford lol
@carls6359
@carls6359 5 жыл бұрын
I find that cold weather affects cordless tool performance more than hot weather, at -20 the batteries barely run.
@ConcordCarpenter
@ConcordCarpenter 5 жыл бұрын
John Galt/Taggart do you use a “hot-box?”
@sal.pizzurro
@sal.pizzurro 4 жыл бұрын
It wouldn't work because I'd be inside with the AC on sipping Mai Tais
@vermili0138
@vermili0138 4 жыл бұрын
My only problem with my Flexvolt table saw is that it only has one miter slot and that table itself is a bit too narrow for my kind of work other than these things it's really good!
@plgard
@plgard 6 жыл бұрын
Rob, Love the channel and the content, but you know you can’t give the FlexVolt products a fair shake! ; ) BTW, when you (Milwaukee) come late, you better come prepared… Milwaukee had a hard target to aim at…
@powertoolexpert8579
@powertoolexpert8579 5 жыл бұрын
Fantastic power tool. Nice video!
@uglyashelful
@uglyashelful 6 жыл бұрын
Sawr. Sawr. Sawr. Sawr. Sawr. Sawr. Sawr. Sawr. Clam Chowder
@oceres
@oceres 6 жыл бұрын
Chowdah!
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
Haha where you from brother?
@uglyashelful
@uglyashelful 6 жыл бұрын
@@ConcordCarpenter Chicago........I know, I know......
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
I love clam ChowDAH
@ConcordCarpenter
@ConcordCarpenter 6 жыл бұрын
fancy haha love that
These Table Saws CAN'T Keep Up!!!
18:58
Finish Carpentry TV
Рет қаралды 813 М.
ROLLING DOWN
00:20
Natan por Aí
Рет қаралды 11 МЛН
Whoa
01:00
Justin Flom
Рет қаралды 24 МЛН
Best 12-Inch Cordless Miter Saw - Head-to-Head
21:14
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 250 М.
Best Portable Job Site Table Saw - Head-2-Head
25:38
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 2,4 МЛН
Dewalt Table Saw VS Milwaukee Table Saw (HEAD to HEAD REVIEW)
13:04
Tools at Work
Рет қаралды 145 М.
I don’t know what Dewalt was thinking with this…
25:24
wittworks
Рет қаралды 718 М.
I Never Knew This TRICK About the OSCILLATING MULTITOOL?!
9:22
The Honest Carpenter
Рет қаралды 936 М.
Why Doesn't Everyone Make These 5 Table Saw Upgrades?
12:00
731 Woodworks
Рет қаралды 626 М.
DeWALT 60v Flexvolt Table Saw…Ours Broke
19:08
Campbell Built
Рет қаралды 1,2 М.
I'll never buy another DeWALT tool.
7:01
Finish Carpentry TV
Рет қаралды 1,4 МЛН
Dewalt Cordless Table Saw: Is It the Right Choice for You?
12:46