Dewalt Table Saw VS Milwaukee Table Saw (HEAD to HEAD REVIEW)

No video

Dewalt Table Saw VS Milwaukee Table Saw (HEAD to HEAD REVIEW)

Рет қаралды 145,896

Күн бұрын

Head to head review of the Dewalt FLEXVOLT 60V MAX* 8-1/4In Table Saw Kit(DCS7485T1) VS Milwaukee M18 FUEL 8-1/4In Table Saw with ONE-KEY Kit (2736-21HD)
Link to where you can buy it:
Milwaukee M18 FUEL 8-1/4In Table Saw with ONE-KEY Kit (2736-21HD)
shrsl.com/1qf4p
Dewalt FLEXVOLT 60V MAX* 8-1/4In Table Saw Kit(DCS7485T1)
shrsl.com/1qf4t
Bosch TS1004 Dust Bag
www.amazon.com...
INSTAGRAM: / tools_at_work

Пікірлер: 94

@foleydave26 2 жыл бұрын

Why not make them able to plug in as well. Battery or plug and make it charge a battery while plugged in.

@wileecoyote5749 10 ай бұрын

Because that would make sence ha ha

@kennedymcgovern5413 Жыл бұрын

Update: Watching this video when it is 3 years old, just after buying the DeWalt. They have fixed the on/off switch. It now comes from the factory with a hole, through which you can push the start button without lifting the mechanism. Haha, they must have watched your video too!

@jonathanfegelein9361 Жыл бұрын

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzfaq.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

@essentialdeparture9999 4 жыл бұрын

One big difference for those who use crosscut sleds or jigs is that the Milwaukee has two proper mitre slots. Nice comparison and review with proper real world feedback. Thanks. 🤜🏻

@jeroenvandend 3 жыл бұрын

new one has 2 2 =D

@wileecoyote5749 10 ай бұрын

Unfortunately he was found dead

@michaelc7283 5 жыл бұрын

Hi, Just got a chance to see your video on these two cordless table saw. I agree with you, if they took each good features from both table saw you will have a the perfect cordless table saw. I like how you modify the dewalt shut off switch. I hope dewalt can redesign that on the table saw. Milwaukee got it right on the switch. I do like how the blade goes up / down on the milwaukee. DeWalt needs to change that on theirs. You forgot to mention that the milwaukee can use a dado blade and the dewalt can't. Just don't now how fast it will drain the battery when using a dado blade. Still deciding but i do have the corded dewalt table saw. The metabo is 10" but i do like the battery and corded adapter. Now it's very heavy and very pricey. Thanks for the video and information.

@garlicbad 4 жыл бұрын

And another big difference is Milwaukee can install dado stacks, though I honestly doubt that if I really need it on a cordless table saw.

@squarelevelplumb 3 жыл бұрын

I found a used 6.5 inch Dado stack and have used on my Milwaukee a few times. Dado throat plate avaiable for Milwaukee.

@squarelevelplumb 3 жыл бұрын

I have the Milwaukee and love it. I have had absolutely no issue. I made my own cabinet, with left side and out feed tables. I am a Hobbyist, DIY guy, but love this saw. I am now using a 7 1/4 inch circa.saw which saves the battery.

@philipdove1705 4 жыл бұрын

I've used both very handy. I got the Milwaukee it's real fun to take out on a remote jobsite and rip foam and plywood without taking a generator

@onlineoffgrid 5 жыл бұрын

Nice review I have both saws and like you don’t find big difference between them. They are both good all round portable table saws

@Orgelfan62 7 ай бұрын

I love my 7485 54V Table Saw, he is perfect

@loucifer323 4 жыл бұрын

I'm Dewalt guy love fucking with Milwaukee fan boys but both are nice but both are a little underpowered, I'm gonna buy the new Dewalt DW 7485 with the 81/2 blade and if I need it to be cordless I'll buy the power station which essentially will make it cordless so I'm going that route

@bklyn2va2dc 4 жыл бұрын

Very nice and thoughtful video. I was looking for a great comparison and started watching your video twice but couldn’t get past the Milwaukee t-shirt you were wearing and assumed you’d be biased towards Milwaukee. However, when I ran out of other reviews I came back to yours and I was pleasantly surprised that your review was honest and unbiased and very informative. I appreciate such a thorough review. I rarely subscribe after watching just one video but definitely subscribed to your channel. Keep up the great work!!

@paulauten1945 4 жыл бұрын

I purchased both and ended up returning the dewalt for 2 main reasons. #1 is milwaukee still has the better battery options and 12.0 batteries are on ebay for $100. #2 is that milwaukee has 2 slots and i can use my miter sled. I do give dewalt the win on dust collection

@marcowens3522 Жыл бұрын

I have the 10inch dewalt table saw I love it. It has a bigger rip than the milwaukee and I've never seen a 12.0ah m18 milwaukee battery on eBay for $100 I'm calling Bs on that!

@joer9276 2 жыл бұрын

I’m pretty invested in the dewalt system, but the 2 mitre slots and ability to use dado really made me wish the Dewalt had those possibilities.

@chevy5137 4 жыл бұрын

Great review bud! I got the Milwaukee M18 FUEL 8-1/4" table saw seeing how that's the line I'm in with 20 Milwaukee tools and 13 batteries most of which are high amp ones and I love it, I never even use my Ridgid 10" table saw anymore even when I have access to an outlet!

@scottsena6760 4 жыл бұрын

I'm grabbing the Milwaukee this week (My plarform.) but? I have plenty of Dewalt corded too because of fair reviews like this..... and they both look good with my greatly appreciated/problem free Ryobi AirStrike nailer ta boot! Solid stuff all.

@jeffrydudley7157 5 жыл бұрын

I really enjoyed your review, I have the Milwaukee cordless but own the Dewalt corded version.

@Ranbuowsatrawarriar 4 жыл бұрын

Same same.

@MHP423 Жыл бұрын

Good video. I do like how you modified the switch to access the DeWalt on/off button 👍 I'll do that to mine now too. Cheers.

@jeffbradley8783 3 жыл бұрын

Thanks for taking the time for the comparison

@nunorodrigues6201 3 жыл бұрын

Good friend! Which of these 2 machines do you prefer or advise! Milwaukee? Or Dewalt? Thanks

@greatbay1961 4 жыл бұрын

great for ripping soft wood pine now try some hard oak it will bog down, I'll stick with corded thanks these battery powered are very limited and the batteries wear out real quick ive tried.

@thommytom 4 жыл бұрын

Very nice and honest review, thank you. I see you use on both saw a Freud blade...Can you please tell me the exact type you are using please?

@MrBostonBilly Ай бұрын

My dewalt saw has a lever on the side for changing the riding knife. It's really easy

@wwmilanl Жыл бұрын

I think you forgot to mention that Milwaukee can use DADO blades (6') while Dewalt doesn't, that in my case make me go to the Milwaukee table saw even while I am more on the Dewalt Platform having several 60V batteries, Thanks for your Video great info.

@chrismcroberts2078 5 жыл бұрын

Excellent review. Thanks Austin

@sc0368 4 жыл бұрын

Solute to Dewalt saw that came out first! It's easier to improve on someone else's design like Milwaukee did..

@ptrproducttestreview9593 3 жыл бұрын

At some point they all copy each other, but good job Dewalt.

@pf5658 5 жыл бұрын

A very well fair and detailed review. Well done.👍🏾😊 Just ordered the Milwaukee today and I’m looking forward to using it. It’s my first ever table saw.

@chevy5137 4 жыл бұрын

Your gonna love it!

@pf5658 4 жыл бұрын

@Chevy513 - I’m actually really loving it.😊 I was blown away by the power of the saw. Really was not expecting it to work so well and have so much power.

@chevy5137 4 жыл бұрын

@@pf5658 Yeah it's really high quality and it's got plenty of power. I got mine cuz it was on sale and boy am I glad I picked it up!

@pf5658 4 жыл бұрын

@Chevy513 - Lucky you. I paid full price, unfortunately. And I bought as a kit with battery. I believe it was five hundred and change. Can’t recall exact amount, But I know it was five plus. What made me mad is right after I bought mine it was on sale for four and change. Really sucks.☹️😂

@chevy5137 4 жыл бұрын

@@pf5658 Yeah I got mine right after they released them on sale for $449 with a 12.0amp battery and I got a free stand too, I lucked out! 👍

@scottsena6760 4 жыл бұрын

What a great review (and also nice to see both Dewalt and Milwaukee keeping it real in competing well). In the end? The Dewalt’s pricing for the 7480 will probably have me roped in (while my Milwaukee M12/M18 platform whines lol.) From Hitachi to Skil, from Dewalt to Milwaukee, there’s no excuse to own a poor table saw these days....and Dewalt forced that whole reality!

@iginiobluevest9259 3 жыл бұрын

New dewalt 60V table saw- left of table pull latch then change knife and guards, table saw accessories storage

@billdodson207 4 жыл бұрын

excellent comparison - would love more info on calibrations and adjustments

@Kianrui 4 жыл бұрын

Which one you prefer and should I buy? The Milwaukee?? The DeWalt? Or Bosch GTS 10J ??

@erikg82 Жыл бұрын

Can you interchange the fences?

@georgehyker 3 жыл бұрын

Good review comparing these saws. Thanks.

@justinbolster5406 Жыл бұрын

Does the Milwaukee fit on the dewalt stand.

@robnowe5464 2 жыл бұрын

Why does the Milwaukee have a piece of wood on one leg to level it? Did the leg break off or what?

@realworldcarpentryremodeli5868 4 жыл бұрын

I like your review. Keep it up . Thanks

@ianharrison7646 5 жыл бұрын

Really enjoy your videos Austin ⭐️⭐️⭐️⭐️⭐️👍👍

@toolsatwork7569 5 жыл бұрын

Ian Harrison thanks.

@danielalvarez1078 4 жыл бұрын

If both are similar I’ll have to go with Milwaukee since I have a ton of batteries. If that weren’t the case I’d go Dewalt.

@insantiago798 2 жыл бұрын

I like the dewalt 7485 it’s more powerful than the cordless dewalt also on the Milwaukee the riving knife sticks up from the blade so you can’t rip stock that’s taller than the blade

@adamharris2674 Жыл бұрын

just flip the lever and take it off..

@steffendetrick9403 2 жыл бұрын

I’m not familiar with your channel but I’ll subscribe that was a really unbiased and review.

@bret9741 2 жыл бұрын

My company has both. I agree with your review 100%. We have sold off our Dewalt saws just to standardize on one battery line. However, hands down Milwaukee fit and finish isn’t as good, its ergonomics are not as good and the stand isn’t as good. But for us, the single battery line was more important for us. We’re happy with our Milwaukee table saws… but darnit… Milwaukee please stop focusing solely on power bragging rights exclusively. I recently purchased a Makita 40v miter saw because the Milwaukee miter saws are really poorly made. Wow, is all I can say. The Makita miter is 5 star and above. The Milwaukee saws are 3 stars at best. If Makita continues to improve the 40v line and offer more batter sizes all the way up to a 12.0.. and if the quality improvements are similar to the new 40v miter, then I can see a time when we replace all our Milwaukee saws UNLESS Milwaukee makes an stronger effort to improve its fit, finish and making its premium fuel and “one Key” offerings a truly premium line of tools.

@engjds 2 жыл бұрын

Are those guide rails interchangable between the two? as I have a missing guide rail on my Milwaukee and its £150 for a new one but only 66 for the Dewalt.

@KyokushinNidan 2 жыл бұрын

Thank you. Good job

@jamesthebuilder3141 3 жыл бұрын

hey bro cool vid can you tell me where you got the diablo blade im here in New Zealand and cant get them here i have the dewalt saw over here it has a 30mm arbor would be cool to know cheers o nice mod on the cover will have to do that to mine

@chevy5137 4 жыл бұрын

I love your shirt,, I have a Ridgid shirt and a big banner for my garage that they sent me for free for owning so many of their tools. Now that I own even more Milwaukee tools than Ridgid tools I'm gonna have to hit them up for some free swag like a shirt a banner and maybe a hat or something too!

@loucifer323 4 жыл бұрын

How does the Bosch bag work I just ordered it

@ABH313 4 жыл бұрын

Great comparison video

@lgzz4885 4 жыл бұрын

Good overview vid brother! Smh I just bought the yellow 7480, got such a good price I couldn’t pass up ($230)! & I felt corded might be NEEDED for a TS. I am fairly certain I’m going to return it now for the Dewalt cordless bc at work we have a 7491 which we use daily, so my TS would be for side work/at home projects. I’m still wondering besides the fact it will drain the battery much faster which Isnt an issue...can the Dewalt as the example hang with cutting hardwood? I just installed oak stairs at my parents house and 14x 1” treads needed to be ripped down on the backside. So during that is when I thought to myself damn I’m nervous a cordless 1x 60v (as opposed to my “120volt” 12”flexvolt) might not be able to hang!? Have you run your fair share of hardwoods through them? (Particularly the yellow saw) & was it still good to go?

@bearlemke 4 жыл бұрын

LGzzy I use my DeWalt everyday for all kinds of flooring. With the right blade it’ll cut through absolutely anything you can throw at it. When ripping 2by lumber it’s best to do it in 2 passes but I never do. I abuse this saw constantly, never had a problem. I did however file down the red cover switch for it as it was always cutting off the saw if I let go of it too soon. Filing it made it less sensitive.

@bklyn2va2dc 4 жыл бұрын

Also, do you mind sharing exactly how you went about modifying the on/off switch on the dewalt? Did you drill the hole with the cover in place or did you remove it and put it back? This is something I would like to do. Thanks

@bklyn2va2dc 4 жыл бұрын

Doesn’t answer subscriber questions; had to unsubscribe.

@versatileduplicity9313 2 жыл бұрын

Dado ?!

@natureside1736 3 жыл бұрын

Thanks for the video!

@franciscochapa8877 3 жыл бұрын

Wait, I thought the Dewalt gave you the option to plug in directly to electrical plug?

@christophercrawford2736 3 жыл бұрын

Only the miter saw

@tkarlmann 3 жыл бұрын

Well done review! Ryobi --- Are you listening?

@elfaga 5 жыл бұрын

Doing it right Austin. Great review!

@carolinadesign199 4 жыл бұрын

My money is on dewalt but great review

@loucifer323 4 жыл бұрын

I went corded these saws just don't cut it, try cutting wet treated and they can't even make one cut

@josecastrosemental 3 жыл бұрын

Great video

@spilleradam 3 жыл бұрын

I would never buy a cordless table saw not enough power, I’ve used the Dewalt not enough power, have to change batteries just a pain, and to expensive much better value for money with corded table saw, and more power.

@MustPassTruck 2 жыл бұрын

Dewalt needs a cordless 10" table saw with a sliding table.

@sekainiheiwa3650 2 жыл бұрын

they look like they came from the same designer's room just on red one yellow, probably big daddy owns both companies-but sheep need to be busy choosing :D.

@eliascruz9757 4 жыл бұрын

Cruz ✝️.. Cordless No you way I want full power all the time

@jhopiv 4 жыл бұрын

Wow the volume of your intro is out of control.

@roltol7539 4 жыл бұрын

looking at those festool systainers -- i know you know what is the real profesional tool - festool :D those are just diy level saws..

@andyschlamp7766 4 жыл бұрын

Rol Tol 🙄

@gmusiclarsen1163 4 жыл бұрын

That is what you have to keep telling yourself when you spend literally thousands on toolboxes (systainers) and special festool tables. I guess I will stick with my Makita, Milwaukee and dewalt. My hat is off to Festool marketing though- convincing people to pay in many cases double for tools. I am a professional using my tools everyday. They serve me quite well. I know alot of guys with buyers remorse on that kapex saw.

@roltol7539 4 жыл бұрын

@@gmusiclarsen1163 when you cant afford to buy those, and never use one, you should try, you will understand the TRUE meaning of Made in Germany.

@keep1treal61 4 жыл бұрын

Being a pro master carpenter myself I can tell you that these yellow and red tools do the job. Festool is just another tool. I see some guys out in the field and suck as carpenters . So imho a lot of festool users are the types to buy the most expensive stuff and don’t even know how to use them properly. If you know how to use tools that’s a start.

@roltol7539 4 жыл бұрын

@@keep1treal61 dude you earn lots of money compared to my country carpenter incomes.. and if we doo some high quality carpenter jobs, that pays better, we have to use proper tools, milwaukes, dewalts, makitas etc.. they just dont have the quality to do so.. festool guide line saw - you cannot compare it to makitas milwaukes etc.. its just way on another level of quality.. that gives understanding what made in Germany means.. Milwauke is just another china made crap as dewalt etc.. and as for USA they just spray some marketing gass that milwaukee are made in usa.. I own 4 milwauke tools m18 fuel ones, sander, drill impact, and circular saw.. Festool from Germany, and Hilti from Finland those brands just have another layer of quality in them. They are made as if you were design them yourself.. they are made while thinking how you gona work with them.. In my country dewalts makita milwauk is kinda journeyman tools, beginers.. and advanceds DoiY. they are not designed for profesional use.. I have bough as a gift for my Plumber profesional uncle a m12 pipe cuter. tool broke in 2 days.. covered by waranty and in next week it burns down.. he just does cut regular house pipes 1/2inch etc.. waranty told that you should not use it as industry tool lmao... so it seems its just DIY tool for ocasioinal use, not like to cut pipes as you work..