This video was done in Corel X6 but will work for older versions also. This video shows how to remove a background from a photo. We also use a drop shadow and power clip to finish our project.
Пікірлер: 169
@nellywilliam37083 жыл бұрын
Omg! You’re a life saver. I’ve literally been struggling with magic wand tool and I’ve just not been getting it right. Your video literally helped me. Thank you so much! 🤗
@Coreldrawhelp3 жыл бұрын
You're so welcome!
@Itsrichayo4 жыл бұрын
Corel is and has always been my preferred choice for more than 13 years. Thanks for sharing this.
@doncocker68433 жыл бұрын
Wonderful tutorial. No music, excellent commentary, succinct and with meaningful short major steps recap. Still fully relevant today using CGS 2019. 👍👌😊
@jairojimenes18252 жыл бұрын
todo los que.sguantamos.por la injuzticia tenemos que buscar el cambio....
@CGRREDACTED7 ай бұрын
Thank you for the wonderful tutorial where you actually spoke and explain what you were doing I learned a lot and I'm achieved success on my own project so thank you.
@wdc91610 жыл бұрын
Very informative and a straight forward, easy to understand tutorial, thank you
@JB-xi5ek4 жыл бұрын
Brilliant. Thankfully, I still have this version so can watch and edit as per your helpful instructions.
@Coreldrawhelp3 жыл бұрын
Great to hear!
@zulemaacevedo34629 жыл бұрын
Thanks for the tips! I start to learned 19 years ago by my self and your tutorial its perfect.
@trendcoreldraw52084 жыл бұрын
kzfaq.info/get/bejne/f8icpstymNDOiKc.html
@byrondaman200110 жыл бұрын
First excellent tutorial I've seen with CorelDraw!!!
@medheprintingpress43757 жыл бұрын
no one teaching in class this great and helpful technique
@johnparken26075 жыл бұрын
Thanks!! EXCELLENT tutorial. Your narration is very helpful and the whole thing is clear and concise. Thanks again.
@jiggamark3 жыл бұрын
The Background Removal tutorial i ever had. Thanks bro
@alk9310 Жыл бұрын
You are a Fucking genius... I've watched loads of these videos now and I am crying with laughter each time. Keep doing what you're doing I haven't laughed this much since I was in high school. Just totally hilarious keep them coming
@raymondmaurer18383 жыл бұрын
Awesome! And to think I've been struggling with the transparency tools low these many years.
@mindyrealestateagent7 жыл бұрын
Thank you for this video. I've watched it several times! My version is a bit different but I get the idea with your video! Thank you thank you
@trendcoreldraw52084 жыл бұрын
nice
@bahmannosratollah70177 ай бұрын
Thank you so much for your hard work, and great explanation.
@denizbaronchelli21610 жыл бұрын
i watched stopped and took some notes..it was very helpfull thanks really.
@one1-thunderbolt8398 жыл бұрын
Great video, very clearly explains the process. Thank you.
@nuhumaku21325 жыл бұрын
Simple and straight forward nice one
@gillespaget24846 жыл бұрын
Efficient explanation, i didn't use cutout lab before..... great tool !
@wwowilliam36505 жыл бұрын
awesome!!!! I have been trying to find help with corel and this is the first time someone has posted a video for a novice (I am way behind a novice lol) Like me if there is anyway I could learn more or if there are more videos for corel please let me know and again thank you
@SimPilot-dl8zy4 жыл бұрын
Thank you for this. you really helped. One question though, How do I scale this to a letter size?
@ginaasayas6278 Жыл бұрын
Wow! it's Amazing I did it well ! Perfect work !
@NormBa10 жыл бұрын
Yes I do this. But it can be labor intensive. I wonder if there's an intelligent s/w just for this specific application which has the smarts to differentiate object from background. That would be really nice.
@77missconduct9 жыл бұрын
Thank you! I really needed some fine tuning on something, this was what I needed.
@dendrologia5 жыл бұрын
I'd rather use powertrace, use specify to remove all background colors, than create a boundary around the vectorized object and use The resulting outline to intersect with The original bitmap
@kpoteetwrmom6 жыл бұрын
great instructional video....easy to follow
@ahmed3lom2 жыл бұрын
u see that little cog option button on the bottom near the fullscreen button? if u click on that u can chose to slow it down or speed it up. i
@block93906 жыл бұрын
great vid thanks bud, your a good teacher
@bernhardschmuck9 жыл бұрын
Thanks to you, learn much more about Corel Draw x7.
@barwapeter5 жыл бұрын
Thanks a million. Came in very very handy.
@SandpiperN121PP6 жыл бұрын
Great tutorial... but unfortunately my version of Corel doesn't have the add / remove detail option... so I cannot fix the cutout after I do it.
@ehimareohue57687 жыл бұрын
Awesome and simple explanations. Thanks a lot.
@abdellah91434 жыл бұрын
Thanks a lot for the video. It helped me very much.
@christopherdunbar3944 жыл бұрын
Looks well good
@watsonnavarro3116 Жыл бұрын
Thank you! Great video
@maxmalik928 жыл бұрын
Thanks for the Video Sure made my job so much easier
@kimhuffman47309 жыл бұрын
I just purchased an Epilog Laser and am needing help converting photos to bitmap so that I can get a great image to etch. Thank you.
@apxpandy49654 жыл бұрын
Great video - very helpful! Thanks!
@ramonabaird33757 жыл бұрын
Excellent! Thank you! Exactly what I wanted to know.
@mihalyhelmeczi6411 жыл бұрын
Thx this video ! Its very helpful, and its works on Corel Draw 12 also.
@elishabellon62799 жыл бұрын
im following the instruction but when it comes on 10:24, I cannot find the power clip by using right click just only edit bitmap etc. almost done but somethings missing,the power clip.. Im using coreldraw x3.
@abdurehmansaad40683 жыл бұрын
An Excellent tutorial indeed!
@wenwen62329 жыл бұрын
I have a problem with the picture, the "edit bitmap" button is grey and i cant click it. What can I do?
@Coreldrawhelp9 жыл бұрын
The first thing to check is that the "Bitmap" is selected. then the button should be active. Also make sure the object selected is a "Bitmap" not a Document Object.
@apxpandy49655 жыл бұрын
Good presentation, useful, too! Thanks!
@ninolibradopunongbayan19984 күн бұрын
i think when its come to vector i prefer corel draw than ai but when its come to images i still prefer photoshop
@patrishaannnicolemiralpes869 Жыл бұрын
This helped a lot thank you
@desiredriving7 жыл бұрын
Amazing guide!Thanks for the help!
@tonyalford37415 жыл бұрын
It keeps telling me that the object that I selected is invalid.
@jmdelossantos91193 жыл бұрын
Thank God for your video 🙏😄
@michellemccartan27616 жыл бұрын
Thanks for the video, very helpful! This is almost exactly what I'm trying to do, but my image has several straight lines. How do you draw straight lines using the highlighter tool? The usual control key doesn't seem to work in the cutout lab, and my freehand straight lines are really bad (unless I'm doing it wrong which is totally possible!). I'm using Corel Draw x8.
@Coreldrawhelp6 жыл бұрын
As far as I know there is not a way to force a line to be "Straight". But it should not matter that much. As long as the highlight covers the line, the exact "Straightness" should be determined by the artwork not the highlighter.
@michellemccartan27616 жыл бұрын
Thank you for answering, I guess I can make the highlight tool wider & then clean it up afterwards.
@virenparmar73318 жыл бұрын
NICE Video Sir
@Coreldrawhelp8 жыл бұрын
+Viren Parmar Thanks!
@Beautifulplaces9549 жыл бұрын
hi friend. i have a problem. i am using corel draw 11 and there i did not see the two option in the corel photo paint . 1 is add detail tool and 2 one remove detail tools. where i see it. plz help me
@CTX1258 жыл бұрын
That was sweet! Great Video!
@mikeraymond54748 жыл бұрын
How can I save the picture without the background for use later in different projects. When I try and save it always adds a white background to it.
@Coreldrawhelp8 жыл бұрын
Just save the CorelDraw file and reload it and place any background you want behind the cut image. Save the .cdr file.
@todortalevski14 жыл бұрын
Well done!
@gloriabruce77297 жыл бұрын
hi sir please I completed what you were doing but after getting the image and the oval circle around it when I try to fill the background it will fill all the image what should I do please
@moonmoon-eb9ij Жыл бұрын
Awesome
@terackie10 жыл бұрын
I've got corel draw essentials 4 but I don't have the "cut out lab" in corel photo paint, is my programme to old?
@LBurger719 жыл бұрын
When you chose your photo it was a jpeg. When you dragged and dropped it to your new corel draw document, it changed to a bitmap. Did you have to tell it to do that or did it do it automatically? Thank you in advance.
@Coreldrawhelp9 жыл бұрын
Lisa Fidler Walter A jpeg is a type of bitmap so that was done automatically.
@LBurger719 жыл бұрын
***** I don't think I ever knew that. Thank you.
@ferzan11179 жыл бұрын
***** ı have like problem. what can ı do ? please help : ( my problems pics )
@Coreldrawhelp9 жыл бұрын
Ferzan Dokumaci Your photos show your "Edit bitmap" buttons are not highlighted. The most obvious cause would be that you do not have your "Bitmap" selected or what is selected is not a bitmap. When you select the object make sure your status bar says it is a bitmap. If it say something like "Document object" or something else it is not a bitmap. Hope this helps.
@ferzan11179 жыл бұрын
***** Thanks That Help Me
@whitneydrums9 жыл бұрын
I have been using photo paint 9 to edit photos. I cut out the background a lot and it's very tedious on that program. I saw this video and then purchased Paint shop pro X6. It does not seem to have cutout lab. Do you know what's up with that?
@Coreldrawhelp9 жыл бұрын
whitneydrums This tutorial is on Corel Photo Paint, I have no idea what is available with Paint Shop Pro.
@ryanmiller46379 жыл бұрын
Great Job! Thanks so much!!!
@nammymoegan10 жыл бұрын
I got coreldraw x4, after i click effect>power click>Power click inside Container. It just show me this sentence :"the object you selected is invalid." How can I do? Thank you for helping
@Coreldrawhelp10 жыл бұрын
The object you select can not be part of a any kind of group. This could be the problem.
@jessiegibson90234 жыл бұрын
Good video thanks
@SahFam10 жыл бұрын
i want to know how to cut images in circle in corel draw
@jimknaub209310 жыл бұрын
Really helped me ! Thank you very much.
@adrianoidano92610 жыл бұрын
i have corel draw photo paint x5 and cant find the power clip function in it..how come?
@rotech41054 жыл бұрын
thank you very much for this tutorial
@sandralynn81735 жыл бұрын
Great tutorial
@ibidesign4 жыл бұрын
Terrific tutorial: thank you!
@ameypadhye90416 жыл бұрын
how ro do it in corel draw x3......power clip inside option is not available in x3🤔😟
@user-vo7co2cm2w Жыл бұрын
Don't believe but it really worked
@JONSEREDdotWS8 жыл бұрын
trying the power clip on oval says object is invalid. How do i make it valid 7x is the version .Thanks
@NataliaZagoriy7 жыл бұрын
I have the same issue...
@fernandohercules59932 жыл бұрын
It really works Im shocked
@tigerking48587 жыл бұрын
Excellent.
@medheprintingpress43757 жыл бұрын
thanks again for everything sir your doing well
@ogunbaseridwan3097 Жыл бұрын
Nice tutorials
@robertogono75616 жыл бұрын
i have tried it out but my power click does not work out please help me out
@janetmejiaabenoja52917 жыл бұрын
thanks....very helpful😘
@blijkegaal-kool99258 жыл бұрын
i have corel draw essentials x 6 , its not the same?
@kalanikumarasinghe76699 жыл бұрын
Thanks! that helped a lot
@realityred8 жыл бұрын
Thank you so much!
@arlangarci10 жыл бұрын
how to shape the background like making it a heart shape?
@Coreldrawhelp10 жыл бұрын
You can make the Oval any shape like and it will give you the same effect. So I your case draw a Heart and Power Clip the Photo into the hear.
@jamiconroy78417 жыл бұрын
Thanks so much, huge help!!
@user-tm4my4jb6d2 жыл бұрын
BLESS YOU.
@dongpuno007 жыл бұрын
thank you, i learn in your video
@gregorioganesh455110 жыл бұрын
would be nice if he said what version of coreldraw this is
@Coreldrawhelp10 жыл бұрын
Corel X6 but works in older versions Thanks for the help!
@LizzMukami9 жыл бұрын
Thanks for sharing...
@iqbalhussain86644 жыл бұрын
Jazakallah
@francizarmymenseries529610 жыл бұрын
i cannot find power click..im using corel x5
@annkagaruwanjiku79202 ай бұрын
God bless you
@muhajirsaputra967810 жыл бұрын
really helpful! thanks a lot
@socalgal0075 жыл бұрын
So helpful !
@noorengineering10797 жыл бұрын
very help full thnx
@davinjones34867 жыл бұрын
When I do this coral photo paint comes up with a problem and wants to close after I have cut it out previewed then click on done
@Coreldrawhelp7 жыл бұрын
You may need to reinstall Corel Paint.
@davinjones34867 жыл бұрын
No that didn't work it is still doing it
@Coreldrawhelp7 жыл бұрын
You may need to contact Corel and see if they have a solution.
@flashfight84809 жыл бұрын
hello everybody. i use corel draw x5, i change the background, but couldn't save it, I cant't see the save button, anybody can heilp me with it.? please.
@parttime98959 жыл бұрын
This really helped me... Thanks ;D
@abcs34337 жыл бұрын
thank you for this sir ji
@brandonchong60934 жыл бұрын
Wow! Thanks A Lot!!!
@bilalremzi196 Жыл бұрын
thank you
@sidrazamir99548 жыл бұрын
Hello, add detail tool and remove tool is not showing in my coral draw please tell me how to show it?
@Coreldrawhelp8 жыл бұрын
Press the "Preview" then they should appear.