Corsa TURBO project, chassis roller #1

No video

Corsa TURBO project, chassis roller #1

Рет қаралды 25,855

Күн бұрын

In this video I make a start on a new project.... It's a Corsa Turbo for Dream Car Giveaways! There's a lot of work to be done under the car so I bought me a new tool! Make way to the cheapest but highly recommended car roller by CJ Autos. It works a treat!
Go check out www.dreamcargiveaways.co.uk for a chance at winning some cool cars!!!!
Body roller from www.cjautosheywood.co.uk

Пікірлер: 119

@hiliak Жыл бұрын

Looked well sketchy but worked well. Looking forward to more progress 👍

@ODDAutos Жыл бұрын

It had me worried too before I lifted it, worked out great though.

@jackrogers-sj2rc Жыл бұрын

I built the car owned it for many years , paid 3k for that paint job and bonnet vent and body shop argued to toss that the bonnet vent was fitted correctly 6 months later it started peeling off. Some one from dream car has jacked it up on the wrong place as side skirt wasn’t like that.

@ODDAutos Жыл бұрын

It’ll be back to great soon 👍👍

@20gibbon Жыл бұрын

That's a handy tool indeed for some underbody restoration. not seen one before like that.

@ODDAutos Жыл бұрын

It worked really well 👍

@rodneyhull9764 Жыл бұрын

thats an ideal device for getting at those lost coins trapped under the seat rails....ordered

@enemyfruitloop5858 Жыл бұрын

What a tool! Not you, but that’s a nice bit of kit. Very useful and looks easy to use.

@ODDAutos Жыл бұрын

Yes brill piece of kit, would recommend 👍

@MrAidanfleming Жыл бұрын

Had so many corsa turbos over the years. Awesome cars

@ODDAutos Жыл бұрын

Can’t wait for the test drive on this one 👍

@anonimushbosh Жыл бұрын

That's brilliant! Question about factory rust coatings though - in the resulting video can you briefly cover what needs to be removed? Ppl say you should remove it all & recoat and some say that's just a waste of really hard work & just do what's loose or trapping moisture. Is it easy to tell the difference when you're examining it? Asking for a 15yr old Golf! Cheers

@Towbar78 Жыл бұрын

I need one of these in my life.

@azzmomootr Жыл бұрын

Beautiful motor that should be on my drive

@tdoteva4973 Жыл бұрын

Need more of this restoration asap love corsa

@bigkeg9173 Жыл бұрын

What an excellent tool 👍 Great for dudes doing restos etc 👌👌👌

@ODDAutos Жыл бұрын

Hoo Roo big Keg, yes this worked well 👍

@thestumanshow Жыл бұрын

I spent the weekend under my Suzuki Vitara, which is luckily lifted 2", so no jacking required. However, that tool looks incredible, making access so much easier!

@ODDAutos Жыл бұрын

It’s much better. Stood up, headphones on just working away with no crap falling all over you 👍

@reecesmith7097 Жыл бұрын

I have a arden blue c20let corsa b not everyones cup of tea but it sure moves

@stephenthatcher6883 Жыл бұрын

Mega bit of kit must get one

@Lot76CARS Жыл бұрын

Looked a great (cheapish) way to do the underside.. amazed it worked so well!

@paulriggers1558 Жыл бұрын

brings back some nasty flashbacks, my ford cargo recovery truck cab went up like that, but didn't stop.... think it needs some sort of safety limiter/stop/lock, just in case, but well worth 400 PS -it took 9 of us to lift the cab back up, sliding the steering column back together etc, then i slowly drove it back to base, in a pair of brown underpants keep it up young man

@Alexander_l322 Жыл бұрын

Put an extra axle stand on the other side to catch it, not used one of these tools so I can’t say if that will work.

@ODDAutos Жыл бұрын

Bet that went bang when it came off 👍

@paulriggers1558 Жыл бұрын

@@ODDAutos loudest noise was the airlines ripping off, + a cloud of water vapour, it literally blew up in my face... [+ still limped it home with zero brakes]

@Edward.Mucklow Жыл бұрын

i love it! thank you for showing the jig. i will contact them soon about shipping to the USA. keep up the good work

@CarGuyLife Жыл бұрын

Cant beat a old corsa b! Especially a c20let like this with full gsi kit and speedlines 🥵🤩😍

@georgeclements2742 Жыл бұрын

Nice kit, but like all equipment for working on undersides it is good for some tasks and not for others. You have to have the hubs on one side of the car at least. When I get rich I will have a couple of different hydraulic hoists, a car roller and a rotisserie - Oh, and a hydraulic motorcycle workbench. Dream on.

@ODDAutos Жыл бұрын

Yes probably get it on the lift to take off all the suspension etc 👍

@darianistead2239 Жыл бұрын

I wouldn't mind some of those but it can't be good for a macpherson strut. I'd be inclined to fab up a bar with hub and tower mounts, save flogging expensive coilovers..

@ODDAutos Жыл бұрын

It’s all ok so far 🤞

@mddaly6082 Жыл бұрын

Maybe the next video will be testing how far you can roll one before it goes over? Looks like it packs away quite small when you're done, which is a bonus.

@ODDAutos Жыл бұрын

Ha ha I’ll try that on one of my own cars 🤣

@allysonsquires8421 Жыл бұрын

As if I commented about my 16v Arden blue corsa b having the same power as the clio and your now doing one... great cars cheap n quick for not a lot of money

@ODDAutos Жыл бұрын

Ha ha OG corsa is the best 👍

@Dino.808 Жыл бұрын

Simple tool but very effective. I like.

@deanmarskell1518 Жыл бұрын

What an amazing bit of kit that roll over kit is love the channel keep up the great work guys ♥️

@ODDAutos Жыл бұрын

Cheers Dean 👍

@geraldogara5098 Жыл бұрын

I didn't think it was going to work? Keep up the good work 🤔🤗👍👍

@JonMorley1 Жыл бұрын

Not sure the bearings will be too pleased with that kind of pressure on them

@benjohnson7170 Жыл бұрын

What could possibly go wrong? Kidding, it's simple physics. Great idea. Does have it's drawbacks,but so do hoists/ramps etc.

@ODDAutos Жыл бұрын

Yes think I’ll get it back on the ramp after to drop all the suspension off and stuff 👍👍

@bigsquatchsasfoot1964 Жыл бұрын

Impressive! I was thinking surely not but worked a treat nice one 👍

@ODDAutos Жыл бұрын

I was thinking the same lol, surprised me too 👍

@donbrads4523 Жыл бұрын

Awesome 👏

@gixxerthouk4 Жыл бұрын

liked the roll over frame, but not sure about a 2litre turbo with small discs rear drums!!!!!!

@kevinclark6335 Жыл бұрын

Keep up the projects. Loving the channel.

@ODDAutos Жыл бұрын

Thanks Kevin 👍👍

@tonybilco1317 Жыл бұрын

Great video as always..loved this review thankyou more like this please.?really helps us weekend mechanics..great channel keep up the great work ❤👏

@IanFarmer Жыл бұрын

What a cool piece of kit, wish id had one of them when I was a kerbside mechanic 🤣

@ODDAutos Жыл бұрын

I was thinking the same, doing exhausts that are rusted on solid and you’ve not enough room to swing the hammer

@stevenglossop4274 Жыл бұрын

Great video 👍👍

@hinga9895 Жыл бұрын

Impressive, good demo!

@andybtec Жыл бұрын

A bit jealous of your sheet metal folder in the background

@ODDAutos Жыл бұрын

It’s a big boy, had some stick from me over the years 🤣

@pattiboychannel311 Жыл бұрын

Wow great idea, very impressed

@ODDAutos Жыл бұрын

Cheers buddy 👍

@samperras Жыл бұрын

What a fantastic invention

@ODDAutos Жыл бұрын

It works well doesn’t it 👍👍

@Threepoint2 Жыл бұрын

That’s the most awesome thing I’ve seen. I was expecting it to flip. 😂

@ODDAutos Жыл бұрын

Me too ha ha, deffo was easier this afternoon getting all the old undersell off with it on its side 👍

@1mach28914u1 Жыл бұрын

I wonder if the wheel bearings, suspension components can handle it. Otherwise it looks like a great idea.

@ianaustin4271 Жыл бұрын

Oh wow. Great clip

@ODDAutos Жыл бұрын

Cheers Ian 👍

@russhopkins724 Жыл бұрын

Am I the only one who was twitchy watching that?!?

@ODDAutos Жыл бұрын

I was too lol

@deans_shed_fulla_novas Жыл бұрын

Nope I was too.. I've used rollover spits on stripped shell's many time. I thought those side jigs were only for a fairly stripped car.. I didn't expect to it happily hold a full car with engine etc. I'd be 💩ING myself.

@marty3469 Жыл бұрын

Cool tool, I was wondering what it does to bearings and bushes etc with them loaded up but I suppose spirited driving gives the same load of not more on components..

@ODDAutos Жыл бұрын

Yes I suppose the cars always sat on those bearing so should be fine 👍

@grayfool Жыл бұрын

Interesting. I guess there's a weight limit or some sort of size limit? Pretty cool though. I would have loved this when I was doing my Mini 1275GT many years ago.

@ODDAutos Жыл бұрын

It’s so easy to work on now, I might take the fuel tank off and roll it the other way to do the other sill 👍

@karlgt9989 Жыл бұрын

Was defo expecting to see that go on its roof 🤣

@ODDAutos Жыл бұрын

Ha ha me too 🤣

@jaymwm844 Жыл бұрын

Good for sill and floor repair 👌

@ODDAutos Жыл бұрын

I pull the sill cover off earlier, was actually a pleasant job like that… makes a change lol

@jaymwm844 Жыл бұрын

@@ODDAutos beats lying on ur back getting rust in ur eyes 😎👌

@michaelgoodwin593 Жыл бұрын

Love this channel mate, for what it's worth

@ODDAutos Жыл бұрын

Thanks Michael, glad you like it buddy 👍👍

@mariosnikolaou5212 Жыл бұрын

Awesome tool.

@ODDAutos Жыл бұрын

Thanks Marios, it works great! 👍👍

@benolive9335 Жыл бұрын

If it's any thing like my metro 1.8 turbo that will be insane

@ODDAutos Жыл бұрын

Can’t wait to get out in it 👍

@tessbushell5489 Жыл бұрын

😎

@ODDAutos Жыл бұрын

👍👍

@911marcus Жыл бұрын

This is an handy Tool 😍

@ODDAutos Жыл бұрын

It is great 👍👍

@MrAidanfleming Жыл бұрын

Pleaseeee make more content with this please!!

@ODDAutos Жыл бұрын

Will do buddy 👍

@SzzzYT Жыл бұрын

Did this come stock 2L T? I had a grey one not turbo 1.6 in Australia 🇦🇺 they called them Holden Barina

@preonmodel9906 Жыл бұрын

Lesser beings use tyres and an old stained mattress 😂 Looking forward to the next one 👍

@ODDAutos Жыл бұрын

Ha ha prop it up with a broom stick handle 🤣

@johntruttero Жыл бұрын

That’s so cool 😎

@ODDAutos Жыл бұрын

Cheers buddy, it’s a great bit of kit 👍

@davejones538 Жыл бұрын

I had the SRI version of this car it kept cutting out while being driven 😅garage said it was how I drove in the end I crashed it into a field

@ODDAutos Жыл бұрын

Ha ha poor car, drive it like you stole it 🤣

@gamerforcod Жыл бұрын

Nice bit of kit! Surely you could make it yourself for cheaper

@ODDAutos Жыл бұрын

I suppose you could but it’s the time and curving that thick tube.

@martinpettitt7847 Жыл бұрын

Brilliant bit of kit has it got a limit? How big of a car you can put on it

@ODDAutos Жыл бұрын

It doesn’t say a limit, the tube very thick so I’d expect a good bit 👍

@barabbus- Жыл бұрын

2500kg. This is a copy of a German tilter made by liqui technic in the 80s or 90s they can lift 3500kg and work with a drill. £900 on ebay

@martybelfastsri Жыл бұрын

Nice bit off kit

@ODDAutos Жыл бұрын

Cheers Marty 👍

@derekpalmer7598 Жыл бұрын

i,m amazed you didnt just make one and save £400 . it looks simple enough to do and would have made good content .

@ODDAutos Жыл бұрын

I’ve got got a pipe bender strong enough to put the curve in that thick tube, it’s twice the thickness of the roll cage tube.

@allysonsquires8421 Жыл бұрын

How much

@ODDAutos Жыл бұрын

The roller? It’s £350 plus the dreaded.

@paul3962 Жыл бұрын

Is have the better CT02 model for sale. Retails at about £1300. I want £650 going on eBay soon.

@barabbus- Жыл бұрын

Where are you based in the UK.

@dacky3320 Жыл бұрын

You could have gone with rotisserie spit for that price. Hope you don't find any big surprises.

@ODDAutos Жыл бұрын

I’ve got a rotisserie but most are only weighted for a stripped shell.

@kovacspis Жыл бұрын

It's a borderline sex spec era car!

@ODDAutos Жыл бұрын

I can’t wait to go out in it 👍

@markw539 Жыл бұрын

Be just my luck for it to roll onto its roof 🤦🏻‍♂️

@ODDAutos Жыл бұрын

I thought the same 🤣

@chrisstasinopoulos8895 Жыл бұрын

I didn't even know that such a thing existed!

@ODDAutos Жыл бұрын

It’s a brilliant tool

@stevenglossop4274 Жыл бұрын

Great video 👍👍