Covering An Existing Deck pt 2 of 3

Рет қаралды 169,833

Ай бұрын

Head to Fvrr.co/perkinsbros to check out the services available to you and use code PERKINSBROS for 10% off!
Join this channel to get access to perks:
/ @perkinsbuilderbrothers
Buy the Tool Belt we designed and wear!
perkinsbuilderbelt.com/
Slim... Lightweight... Comfortable... Carries all the tools you need!
Attention Pros!
Get your exclusive SashcoPro Sample kit now. Enhance your craftsmanship with high-performance sealants. Claim here: www.sashco.com/perkins-brothers/
Subscribe to Building Jays Way (Jason from our Crew!)
/ @building_jays_way
Get amazing deals on HARDWARE, FIXTURES and TOOLS at:
perkinsdeals.com
Get a 15% discount on ALL of the Truewerk gear we wear With their Pro Deals:
truewerk.com/pages/the-truewe...
Check out Zip System
www.huberwood.com/
Learn more about us at:
www.perkinsbuilderbrothers.com/
Learn more about the RSS and R4 screws
www.grkfasteners.com/
You can visit Bryson City and stay in a House WE BUILT! Link below (has all of Jaime's Rentals):
airbnb.com/h/plotthouse
brysoncityfarmhouses.com
#npdevices
#construction
#huberpartner

Пікірлер: 204

@PerkinsBuilderBrothers Ай бұрын

Head to Fvrr.co/perkinsbros to check out the services available to you and use code PERKINSBROS for 10% off!

@AaronJacoub 27 күн бұрын

Can you go back to daily episodes please

@sandra6866 29 күн бұрын

"Pterodactyls crapped on my life" I felt that 😂

@delo3936 28 күн бұрын

I laughed. Thanks.

@cathieschroader5940 29 күн бұрын

Hey, you should give Jonno and Ray a bonus for putting up with your and Jason bromance!

@AdaMakawee 28 күн бұрын

Stay safe. My son was an iron-worker (I say was because he is now an engineer for the railroad). One day he was working about 40' up, there was another floor, so 20' each. He put on the harness like he did every day and his safety guy checked it. BUT he didn't follow it all the way back to where it was anchored. My son had to lean out (his back was to the outside) to fix a bolt on the steel beam and the harness was not hooked to anything. His reaction was to grab a rope that was in front of him. He had his leather gloves on. Friction finally stopped him and he was swinging in and out. The rope swung in and he took the floor below him to his pelvis area. He was able to scoot on to this floor. The whole thing took seconds but felt like hours (he said). Anyhow, he was lucky. he did hurt his back but nothing was broken. SO double check that harness every time, this is a mom talking here! Measure twice and cut once may only result in a wasted board. This could have cost him his life from that distance. Love watching you guys. Carry on.

@Manoffire260 29 күн бұрын

“The Perkin’s Sack” - Brilliant! Genius! This is the kind of marketing that becomes legendary. Universities will be teaching this for decades!

@OperationDarkside 29 күн бұрын

I'm still waiting for the Perkins Builder Bucket Belt

@baggetja1234 28 күн бұрын

Let’s just call it the “P sack.”

@jamespppyacek342 28 күн бұрын

C'mon. I've had one of those on the back of my belt for decades.

@Manoffire260 28 күн бұрын

@@jamespppyacek342 But was it The Official - “The Perkin’s Sack” (as seen on KZfaq) or was it merely a clever impostor?

@54mgtf22 28 күн бұрын

Just cut the chase and call it the ‘scrotum’.

@michaelc.3812 29 күн бұрын

We need an Arlo-Interlude! I sure do miss the guy, and I’m just a few years younger….

@erikowren7894 29 күн бұрын

Please call it a Perkins Sack. It will sell very well. Brand it right on the “Perkins Sack”.

@greezy937 29 күн бұрын

I'm crying 🤣🤣🤣

@ariseman8230 29 күн бұрын

Rdddd

@Longeno55 29 күн бұрын

😂

@Ultra77737 29 күн бұрын

Broke my foot and been outa work for 6 weeks, been doing construction my whole life one of the only things keeping me sane is watching your videos

@831BeachBum 28 күн бұрын

Me too. Broke my foot March 24. Surgery April 4. Been lying around watching these Perkins vids and older ones too. I work as a mechanic.

@Adr1an110 28 күн бұрын

I got surgery, I feel the same way. I hope you heal up good and get back out there as soon as you’re able to.

@rasmusalmqvist5960 28 күн бұрын

Ah man... that sucks. Hope you get better soon.

@Ultra77737 26 күн бұрын

Almost all good probably watched every perkins and camping with Steve videos three times each

@blackhawkaxe1918 29 күн бұрын

Thanks for showing us what the lifeline system was!

@uglycouzin 27 күн бұрын

Jono's comment about a "Pterodactyl crapped on my life" is the funniest comment ever made on this channel. His timing and delivery were so perfect. Well played sir, well played.

@patrickmace1051 28 күн бұрын

"All of building isn't just building. There's a lot of collecting materials." Truer words haven't been spoken.

@Stikker021 28 күн бұрын

'Clear' was the right choice in my opinion. Sun and rain protection when needed, but without the 'gloom'. Matched the beams too. 👍

@diyhandcraftedlifestyle9151 28 күн бұрын

You should consider making a few longer Videos and see how it works out. I like watching your videos, you guys are awesome and Knowledgeable

@alisongarcia7825 28 күн бұрын

I can't wait to see the next home build series. The design looks incredible!

@kronic4486 29 күн бұрын

“We belong together”💿 love you guys!!!!!!!

@outthasky 29 күн бұрын

13:52 Jay sharpens carpenter pencil so much it turns into a construction mechanical pencil.

@gmoney7829 28 күн бұрын

I have watched maybe 80% of PBB videos on this channel. I am still amazed by how great things look when they're done. Another great job guys 👍

@sherrydavis5187 28 күн бұрын

Today is my birthday and we were in Gatlinburg when my husband pointed out that it was not that far from Bryson City. So we hopped across the mountain and did a little drive through. Very nice town. We saw the Hazel House and caught site of Ramel (?sp). Made my birthday great seeing the town. We love your channel.

@marymigliore3396 29 күн бұрын

Doing a great job as usual . I LOVE YOU ALL @ P.B.B. !!🥰🥰🥰🥰🥰

@baseddept. 6 күн бұрын

Love how you post your L's.... thats what it's all about, learning the hard way so you never forget. Keep it lit boys! Watching from Dublin, Ireland!

@w2ttsy670 28 күн бұрын

Hot damn! I’m always keen to see the next build you have coming up, but based on those renders, this may actually be your most luxe build yet. Between your team and NS Builders, I’m getting to see some quality builds coming out.

@smcox1991 29 күн бұрын

That next house is going to be sick!

@Iwan.Spillebeen 29 күн бұрын

You are literally the only channel where I will actually watch the ads because you make relevant and interesting. Aside from that, always a great day when there's a Perkins video up. Much love from Thailand!

@Can_non69 29 күн бұрын

I 💯 love that harness. Stay safe!

@osbengdeleon3510 29 күн бұрын

Good morning! From the Philippines🇵🇭

@internuts11 26 күн бұрын

Don't take my comments to mean anything but love for you guys. I think your show is awesome.

@danzimmer95 29 күн бұрын

Just rocked some 2x6 T&G for the roof deck on my awning. I’m a fan.

@user-jn5fw2xs3n 27 күн бұрын

As a high schooler looking into this field these videos give amazing advice and are so entertaining

@vicwei4302 29 күн бұрын

whaaa! lol! Jay's response to stain choice 🤣🤣🤣

@patrickofiara2157 29 күн бұрын

Really grateful for you guys sharing

@rhondakennedy819 29 күн бұрын

I love these guys. So detailed, every one of them. I'd like more & longer vids. I'd watch. I hate KZfaq made people go shorter in time! I also realize it is lot more time & work putting the longer vids out! Be kind to each other. Stay safe. Love to all

@kylekells7937 29 күн бұрын

Composite decking definitely needs joists at 8-12" OC to stay flat, come across a lot of wavy composite decks on 16"OC

@delo3936 28 күн бұрын

Always fun & educational. Thanks for reminding me about FIVERR. Cheers

@1023Blessed 28 күн бұрын

Another awesome job guys!!! ❤

@williamberry9237 29 күн бұрын

Yeah! A new video. I’ve been missing you guys.

@Jacob-D 29 күн бұрын

I would love a full walk-through of everyone's cars, especially for Jono, Erik and Jamie.

@secretpak 27 күн бұрын

Hey everybody it's very satisfying watching your videos

@Moparman47 28 күн бұрын

Love this channel! You guys are great!

@regularguy9264 28 күн бұрын

Entertaining as always. For purchasing boards like the tongue in groove, I always buy a bunch extra and then bring some back. It helps for when you get a defect that wasn’t noticed at the lumber yard too, since you can return that one.

@iAmTrentMiller 28 күн бұрын

“pterodactyl crapped on my life” when jono said that i truly felt it

@debraimmer260 29 күн бұрын

Respect your workmanship before and after

@54mgtf22 28 күн бұрын

Great job. Closing in on 1M subscribers. Excellent 👍

@coryclarke5516 29 күн бұрын

Best part of the week!

@NeveRestless 28 күн бұрын

Be careful with those RFL’s (retractable fall limiter)!! If your harness connection point gets even a few inches above the anchor point, you dramatically increase the forces on your gear and your body if you fall. I have extensive experience in the climbing and challenge course (ropes courses, zip lines, etc) field, someplace where falls are a common occurrence. We typically use RFL’s a little differently but please please please don’t get any higher than your anchor with those things. Routine inspections and referring to the manufacturers guide lines on lifespan is also critical to the success of those devices.

@Redman-zf6zd 29 күн бұрын

Hey guys I’m not a builder in any way shape or form,infact I’m a chef from Liverpool uk 🇬🇧 your videos are unreal and I look forward to every video 👍

@marcdorey388 28 күн бұрын

I worked for a composite decking company and I’ve seen this before 🤓 most composite clips allow the boards some movement for expansion, which means that the boards won’t give much lateral grip. With your noggins so small compared to your joists means the joists can twist and move along the decking clips - if the noggins were wider then they retain more rigidity in the decking system. You have to rely on the noggins and not the decking planks like with a wooden deck to keep that system up and flat.

@billinhouston3291 22 күн бұрын

what's a noggin?

@marcdorey388 22 күн бұрын

@@billinhouston3291 The brace pieces between the joists that sit at 90 degrees..

@billinhouston3291 15 күн бұрын

@@marcdorey388 Thank you.

@SteveG001 28 күн бұрын

' HARNESS ... SAFETY 1st about time

@Peter-dd3br 28 күн бұрын

When you're looking at paint or stain samples you should always do it under natural light, either outdoors or next to a big window, because cheap artificial lighting can distort your perception of color.

@diyhandcraftedlifestyle9151 28 күн бұрын

You are an absolute Pro with that reciprocating Saw.

@rockscrambler6700 28 күн бұрын

Doubling up the rafters gave the ceiling a nice look!

@goldblueberries326 28 күн бұрын

Jay nailed it when he said his nap was at least 1 1/2 hours😂😂❤ , he knew you guys took a long time to pick out clear🤣🤣😂👍❤️

@arresthillary9502 28 күн бұрын

10:19 thats the next project? whoa, cant wait to see that. very cool

@akbarjahansanowar2504 28 күн бұрын

Love from India

@trbopwr79 24 күн бұрын

I do that work. We can send you a walk thru version just as realistic where the client can walk wherever they want.

@petercampbell9899 29 күн бұрын

What did the final pitch work out to? (Degrees pls, I'm in Oz)

@MrTooTechnical 27 күн бұрын

Are adding hurricane ties. And I hope u r adding more connectors at the rim / house end.

@arresthillary9502 28 күн бұрын

my composite deck is the same way for 10 years. next time you fellas are in the Charlotte area, come by and fix it for me!! 😉

@senuoyizahg490 28 күн бұрын

I could not love u more, listening to Mariah Carey in your car is such a common thing that I do, keep up the good work.

@chriscook4130 29 күн бұрын

Your Pterodactyl sidebars, I’m still laughing. Great work guys.

@joshg87 29 күн бұрын

"We're gonna get clear". If that's not life lol

@leann4925 28 күн бұрын

Question. Would those boards work out for fencing. Love how the roof looks.

@milesharlan1 29 күн бұрын

Thursday Afternoon fun watching 👀 PBB video!! KUTGW

@augustmamolito2247 29 күн бұрын

You Guys do great Work.I know this out of the way Question,but I would Love to hear Jamie Play The Drums ,Give Him a Min or Two?

@TheMidwestWaterproofing 29 күн бұрын

Gas check to conceal the name of the subdivision. Slick

@steelvalleysportsmen7737 29 күн бұрын

So I started using wood dyes inserted of stain, and I can mix my own colors and dial them in. Highly recommend giving that a shot

@internuts11 26 күн бұрын

An easier way to measure how many boards you need is to measure your distance from the house out when your boards are running parallel to the house wall and then divide that total number of inches by 5 and then multiply that by the width. That's how many linear feet you need

@_kj2 29 күн бұрын

Shouldn't your tools be on a lanyard as well when working at height?

@alanaipperspach4756 29 күн бұрын

In the military, that's called a "dump bag" or "dump pouch" and is used as temp storage for everything from water bottles to empty firearm magazines.

@TheCabledawg1 28 күн бұрын

We had those on our climbing belts doing utility line work. They are called bolt bags.

@olafbigandglad 29 күн бұрын

The multiplier for a deck board [or roof board in this case] with a 5" exposure is 2.4 [which is 12/5], so for every sq ft of coverage, you need 2.4 linear ft of board. So for your "roughly" 500 square foot roof, you need 1200 linear feet of t&g, plus waste etc.

@jlambo9757 29 күн бұрын

Mixing gray or white and walnut stain would have been great for the weathered look had you just wiped it off shortly after applying. I’ve done it many times.

@jonnyb1898 28 күн бұрын

i build composite 12 oc now and i measure joist thickness and put the joist in according to size instead of planing so that way when the boards dry in theory there should no humps. Composite is good and looks nice but it’s hard to get dialed in.

@martyhanks5977 25 күн бұрын

Hey Guys: Tech Question. Any chance did you catch if the joists that were down, were also the ones w/ the suspended framing and roofing weight? Meaning...did those "dips" coincide with the Under Roof framing and roof weight?? Thats a thought worth exploring as a future "Pro Tip" IF true

@PerkinsBuilderBrothers 25 күн бұрын

Good question… We did think about that after we had taken all of the under decking roof down but didn’t double check on it so I’m not sure

@martyhanks5977 24 күн бұрын

@@PerkinsBuilderBrothers No worries. I've built the same "under roof" system as well for couple clients. Now wondering if i need to do a stealth drive by inspection?!?? 🙃 Thanks for reply...loving the videos!

@johnstefaniak4935 29 күн бұрын

Clear was the right choice

@LordSilmiINC 28 күн бұрын

the safety harness is very important. i once saw my contractor worker fell off the roof while try to screw in the frame. His head almost hit the rock at the bottom and i never see him coming to work again after that until the work done.

@pjdambra 28 күн бұрын

Why are you surprised that the deck sagged with those composite deck boards? They were spanning 16” Joists. They should have been no wider than 12” OC.

@andygirone7442 29 күн бұрын

that Australian oil Cabot in honey teak is a nice color.

@TheDirtyBirchTrails 28 күн бұрын

The floor in the loft of my log home has the same tongue and groove 1.5 inch lumber and it spans 36 inches underneath.

@CaptainRon13 26 күн бұрын

I hate to “pile on,” but, in my experience with engineered lumber, 16” on center max distance. Plus you have to block them together.

@greencutsguelphlandscaping7980 28 күн бұрын

To calculate how many boards you need measure your span in inches then divide by the thickness of the board. They made that very complicated for some reason

@internuts11 26 күн бұрын

Also I can't believe they don't make you put washers and nuts on galvanized hex bolts for your post to beam attachment. Also I don't see any hurricane ties or hangers. Just toenails. That's like 30 years ago in Baltimore

@_JamesBrown 22 күн бұрын

Does Jason know the plunger cap to that pencil he was sharpening with his knife, you can unscrew and the underside of the cap has a sharpener built in?

@chrisgraeter373 29 күн бұрын

If you are using Composite decking the framing needs to be 12' on center to support, it.

@paulkirkpatrick1555 29 күн бұрын

12 inches lol

@travisosborne3354 29 күн бұрын

Paint frame a medium to dark brown and stain boards light gray

@bryanb1259 29 күн бұрын

Hey hey hey

@SupremeOverkill 29 күн бұрын

Throw a piece of plywood on top of the rafters to kneel on as you cut the ends off. It doesn't have to be a full sheet, obviously.

@Ladysilver43 29 күн бұрын

Is it possible to leave the rafters as they are and just double every other one??

@desilva68 29 күн бұрын

Hey what camera gear do you use ? It works well for your vids im thinking about a similar setup for my channel.

@secretpak 27 күн бұрын

Specially on flat surfaces

@fatcat-hc4pj 29 күн бұрын

Hey guys 👍

@muttBunch 29 күн бұрын

CARDINAL COFFEE. Heehee ❤

@TheMorellv3 29 күн бұрын

Shouldn't composite be 12in OC or less to help prevent what happened to the deck?

@theronzimmerman9851 29 күн бұрын

We always called those fall arresters yo-yos.

@JB-ej2qy 29 күн бұрын

Minwax Weathered Oak is the color you wanted.

@secretpak 27 күн бұрын

Hy jemmy why don't you convert the zip tape roller also in a dispenser it will make zip tap application very easy

@traceywallace4093 29 күн бұрын

So that tongue and groove will shed water? I didn't know it could be used as finished roofing. Love the videos!

@denes44 29 күн бұрын

Who said it's the finished roof?

@kurtzcol 29 күн бұрын

famous last words .it was straight when i left

@creylacoste4981 29 күн бұрын

The orange Se is there because it is first to fade from us. But on the underside of a roof. It would have stayed orange forever

@kpp_3 29 күн бұрын

Its so tough when customers say "just make it look good". Theres always a risk that what looks good to me doesnt look good to them

@davebrinks2809 26 күн бұрын

Need the big saw to cut through the dbl rafters in one go.. need to work your shoulders more Eric 😎😎😎

@albertorozco5981 29 күн бұрын

Glad Eric isnt afraid of heights 😂😂😂