CPU Socket Replacement For iMac : Mac Pro series

No video

CPU Socket Replacement For iMac : Mac Pro series

Рет қаралды 5,330

Күн бұрын

The same procedure applies for:
Mac Pro 4,1 & 5,1 (2009 to 2012) - LGA 1366 - Westmere
Mac Pro 6,1 (2013) - LGA 2011 - Ivy Bridge
Mac Pro 7,1 (2019) - LGA 3647 - Cascade Lake
iMac 2010 - LGA 1156 - Westmere
iMac 2011 - LGA 1155 - Sandy Bridge
iMac 2012 - LGA 1155 - Ivy Bridge
iMac 2013 - LGA 1150 - Haswell
iMac 2014 - LGA 1150 - Haswell
iMac Late 2015 - LGA 1151 - Skylake
iMac 2017 - LGA 1151 - Kaby Lake
iMac 2019 - LGA 1151 - Coffee Lake
This simple video rendered on:
Mac Pro 5,1 Dual CPU - RX580 8GB(flashed) - NVME - FCPX
BGA Machine: JOVY RE-8500
Credits:
1. Parthaven - www.parthaven....
2. MW - Technology - • How to Upgrade The Mac...
3. AshamaluevMusic (no copyright music)
Contact Us:
/ logicboard.macbook
main.iboff@gmail.com

Пікірлер: 20

@wmccinema 10 ай бұрын

This guy is the best, I was supposed to send him my logic board but the local technician in our country insisted to repair my unit.

@JunWang1000 4 жыл бұрын

first, that may be a dummy pin, second, you can solder it to the socket

@maxruehl 3 жыл бұрын

Is it possible/fairly easy to replace broken or mangled pins without having to replace the whole socket? If so, what would I need and where would I get the replacement pins? Thanks for any advice you can offer.

@frank.li.1234 4 жыл бұрын

Hi! Thanks a lot for the video! I recently messed up with the cpu socket on my iMac 2019 logic board too. It’s a LGA 1151. I wonder if you could post the links to buy the tools you have for replacing the socket? Or better, do you accept replacement job?

@iBoffRCC 4 жыл бұрын

Hi, the most important machine in this video is IR BGA MACHINE, jovy re8500. You cant do this with hot air BGA machine. We've replied to your email BTW.

@azzaath Жыл бұрын

ada LGA 1150 ?

@sashm96 2 жыл бұрын

How much would you charge to do the socket replacement?? I have a late 2014 iMac 27 5k.

@emmanuelperrine3966 3 жыл бұрын

Hi mate I really like you video, and I was wondering if I can post my IMac 2010 motherboard to get a socket replacement

@iBoffRCC 3 жыл бұрын

You can contact us through Facebook messenger (Iboff Mat) or WhatsApp (+6013-3469275)

@cristianruban7075 4 жыл бұрын

Hi awesome job ! from where i can buy socket for my imac 27" 2019 ?

@iBoffRCC 4 жыл бұрын

China. aliexpress etc

@AkmaludinDwijaya 4 жыл бұрын

wow, good job. are you from Malaysia? I have a question out of the topic video for you. Base model iMac 2019 5K i5 8500 TDP 65 watt upgrade to CPU to i9 9900k TDP 95 watt, can upgradeable?

@dnlsfq 4 жыл бұрын

Here he's facebook for contact : facebook.com/Logicboard.Macbook

@ngugame9554 4 жыл бұрын

hi, can you tell me why is it require to put the board into an oven before using BGA station? at 0:47 won't the board be back to room temperate while you creating spacer? thanks

@iBoffRCC 4 жыл бұрын

Hi, to avoid the board from warping(delaminated) because of air bubbles inside logic board wafer. The board usually warped out when the temperature reaches 217c, so the preheat@100c is required to prevent permanent damage to the board

@ngugame9554 4 жыл бұрын

So the board is still hot after you put on the screws which you showed here 0:47 ? It only last couple of minutes before the board goes cold again.. thats the only thing i dont understand sorry. :(

@iBoffRCC 4 жыл бұрын

@@ngugame9554 no it was cooled already. That's why we can put the standoffs easily. The air bubbles are expected to not enter the board for 24h, so you gotta finish it the same day.

@ngugame9554 4 жыл бұрын

@@iBoffRCC thanks that makes sense. so its the bubble is the problem to cause board to warp.