Joe teaches the lovely Nicole Wilder to do a Gauge Control Module self test on her 2010 Honda CR-V, let him teach you too! www.cartastrophe365.com/ / cartastrophe365 itunes.apple.com/…/cartastrop...) / cartastrophe365
Пікірлер: 58
@kathleenseitzinger61882 жыл бұрын
Yes! Worked on my 2006 Honda CRV! Thank you.
@pmwolf36242 жыл бұрын
Finally! A straight answer. Thank you very much.
@v.h.5213 жыл бұрын
Omg I have 2006 crv tried all the videos! found this video followed the written steps in the beginning dint even watch the video and bingo it worked ! Thanks so much! The trick is the headlights turn them off!
@CARtastrophe3653 жыл бұрын
Glad it helped! Hope you're having some happy holidays and it's not too 2020-ish, shooting you some good vibes! Thanks for watching and for the kickads comment
@CHIBA280CRV5 жыл бұрын
Fantastic thanks
@darioareviche53169 ай бұрын
Thank you it really works perfectly I really appreciate.🙏
@derekobidowski33015 жыл бұрын
to do the guage test on 2015-present Honda Cr-v the Ex and above trims with pushbutton ignition in addition to the lights you have to first turn the headlights on, hold down the trip button, without pressing the brake pedal press the start/stop button two times to get it to the on position and turn the lights off-on-off release the trip button then press 3 times and the guages should self test. im sure it work on accords and other honda models with the pushbutton ignition on 2015-current models.
@CARtastrophe3655 жыл бұрын
Good man, thank you!
@amrulyalroziq8074 Жыл бұрын
Yayy..it works..thanks
@jeffrymauricio23515 жыл бұрын
My Honda CR-V 2010 headlight stay on, you think a can fix by this way ?
@Unski30006 жыл бұрын
Worked like a charm
@CARtastrophe3656 жыл бұрын
Glad to hear!
@optimusgts2 жыл бұрын
I have a 2007 honda CRV with a non working gas gauge. It always showing 3/4 full while filling up with gas. I see yours is 398 miles before empty. What is the number of miles when you 100 % fill up with gas? In this way ill just rely on my trip meter.
@James020810 ай бұрын
i did this now on my honda crv 2008 2.4 but the light of the abs, esp, cruice control, and others they don't light, also on the left corner down there's a light that says light control. on the screen it says error 1, what does this mean? how can i fix it?
@zionman91492 жыл бұрын
My 2010 Crv Honda air condition not working I have checked all fuses their ok and gas too ok , but if I on the ac switch the ac clutch is working but if I do activation test on my scan tool you will see the is working, I do auto scan but I only find b1008 , but I want to know can this faults code causes Ac not working at the same time the remote too not working help me to solve this issue
@laxmisharma8402 ай бұрын
Sir I have HONDA CRV 2011 MODEL AND AIRBAG SIGNAL KEEPS SHOWING WHILE DRIVING ALSO.. PLEASE TELL HOW TO DEACTIVATE THIS SIGN...
@sugengriyadi10233 жыл бұрын
Good job..
@CARtastrophe3653 жыл бұрын
Thanks
@TPNWR105 жыл бұрын
I did this on my grandma’s car. She has a 2012 model.
@CARtastrophe3655 жыл бұрын
Good to know! Glad they are keeping that functionality going in the newer models!
@kingdom7778663 жыл бұрын
Does this test the LCD screen as well ? Cos mine is playing up bits missing and flickering ext. ? Thanks good video 👍
@CARtastrophe3653 жыл бұрын
I believe it does test the LCD segments, if they are flickering the Gauge Control Module has likely failed man, kinda typical. Good luck! Thanks for the comment!
@xlilnetx3 жыл бұрын
My mom's instrument cluster was all jacked up on the LCD screen. We ordered a new one. It's easy to install u remove the trim where it goes and then remove 3 screws. Two on the side one up top. Then pull out unplug and plug the other in. 100 bucks on eBay for a used one
@husseinshahin93582 жыл бұрын
Hello, i have a 2008 crv. Its mileage odometer is in miles. How can i switch it to kms?
@riigpereira6 ай бұрын
I have the same question
@ptyptypty34 жыл бұрын
Nailed It !!!.. :D and I didn't even use a Hammer (this time!) :D
@CARtastrophe3654 жыл бұрын
Hah!
@therobertybobshow454 жыл бұрын
You mean the fine tuning adjustment tool?
@muhammadaemeer48595 жыл бұрын
i already do this on my honda hrv and it says error 2.how to fix it
@robguerr19885 жыл бұрын
I just did mine and it says error 1 did you figure a solution for this??????
@jus522004 жыл бұрын
robguerr1988 same 2010 crosstour
@trtonnyRodrigues6 жыл бұрын
How you do it on 2010 mdx
@CARtastrophe3656 жыл бұрын
Same way, but use the SEL/RESET button on the steering wheel instead of the Trip button. Good luck!
@trtonnyRodrigues6 жыл бұрын
Car Guys thank you I did it
@timothyslater43473 жыл бұрын
Can anyone exsplane what error one means
@CARtastrophe3653 жыл бұрын
Error 1 means "F CAN communication". There is a high speed communication bus and the Gauge Control Module thinks there is something wrong, it cant talk to the PCM or the ABS Modulator or something. That is going to be a tough putt for a layman to work out.
@timothyslater43473 жыл бұрын
@@CARtastrophe365 thanks pal
@timothyslater43473 жыл бұрын
@@CARtastrophe365 is it a job for a auto electrician
@koslim2 жыл бұрын
2007 crv.. Tried it 20 times.. Nothing
@HassanAli-bv5yt4 жыл бұрын
What do this?
@CARtastrophe3654 жыл бұрын
Do you mean why? Just to make sure the gauges and lights all work
@timothyslater43473 жыл бұрын
Can you reset it with this
@CARtastrophe3653 жыл бұрын
Not sure what you are trying to reset, I would say no, this does not reset anything.
@timothyslater43473 жыл бұрын
@@CARtastrophe365 will it show error in the system
@CARtastrophe3653 жыл бұрын
@@timothyslater4347 yep, there are error messages in the odo display
@timothyslater43473 жыл бұрын
@@CARtastrophe365 thank you for replying to my question
@elvy32364 жыл бұрын
For what is this ?
@CARtastrophe3654 жыл бұрын
If you have a gauge issue, like a tachometer that does not work. Is it a network issue? PCM not sending engine speed? Crank sensor? Or gauge? If you do a self test and the tach still does nothing then you know it's a gauge issue.
@cynthiaegwuatu34922 жыл бұрын
Does this work for the fuel gauge indicator?
@PokuzFoint19823 жыл бұрын
Error 1 what mean? Im using honda CRV 2009
@CARtastrophe3653 жыл бұрын
Error 1 means "F CAN communication". The Gauge Control Module is having trouble talking to another module on the CAN network, PCM, ABS, SRS or TPMS. What's the issue?
@PokuzFoint19823 жыл бұрын
My seatbelt light not coming on when i start my engine
@CARtastrophe3653 жыл бұрын
@@PokuzFoint1982 that would be a pretty unusual failure for an F-CAN system. I think I would move on, check the seat belt switch, see if the seat belt shows buckled and unbuckled in the SRS data.
@PokuzFoint19823 жыл бұрын
@@CARtastrophe365 do i need to scan my crv?
@PokuzFoint19823 жыл бұрын
@@CARtastrophe365 and also when im driving sometimes the battery lights is on and off the mechanic says the alternator is ok and charging.dont know whats the reason