No video

Craftsman weed eater won't start - EASY DIY!

  Рет қаралды 2,563

Guys playing with tools

Guys playing with tools

Күн бұрын

Пікірлер: 44
@DIYVariety
@DIYVariety 4 ай бұрын
Another rather easy job
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
I have way too much practice with carbs. 🙄🙂
@MyGreenLawn2019
@MyGreenLawn2019 3 ай бұрын
another successful video! keep up the good work
@GuysPlayingWithTools
@GuysPlayingWithTools 3 ай бұрын
Thanks. I can't put them out quite a fast as you do though. 🙂
@MyGreenLawn2019
@MyGreenLawn2019 3 ай бұрын
@@GuysPlayingWithTools I actually have not been very fast lately... But we been busy, thats the problem, hard to film when your so busy. Soon..Soon
@GuysPlayingWithTools
@GuysPlayingWithTools 3 ай бұрын
@MyGreenLawn2019 I usually max out at 2 a week so anything more than that is a lot to me. 👍
@JamesRoan0913
@JamesRoan0913 3 ай бұрын
I’m gonna miss that old craftsman 😢
@GuysPlayingWithTools
@GuysPlayingWithTools 3 ай бұрын
Yeah....
@m.angeloz9080
@m.angeloz9080 3 ай бұрын
Like Ur video. Reminds me of another LoL when he said it's your stuff, so I took out power- drive out my mower, bothered the hell out of me when going backwards. shoot, & bicycle handle to start LoL. Awesome mechanics and possibilities 😏
@GuysPlayingWithTools
@GuysPlayingWithTools 3 ай бұрын
I have wrapped all sorts of temporary handles around strings to start things over the years. I can imagine a bicycle handle lol
@rogermcdonald1607
@rogermcdonald1607 4 ай бұрын
The craftsman sounds great Bill! You must have an endless supply of 2 strokes to fix. 🔧✌🇺🇸 #Bandaid
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
This one is a screamer. One thing I love about store brand weed eaters is the way they rev. I have a buddy starting a yard service who heard it 10 minutes after I finished filming and said "Woah! trade ya for my curve shaft!"... I started to make deals then changed my mind and decided to trade straight up. I might lose a couple bucks on the deal but I get Karma points. 😎
@rickthelian2215
@rickthelian2215 4 ай бұрын
Well done, thankfully only needed new lines and gaskets😊
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
I liked that one more than most when it was done. It sounds like it's mad at the grass for growing. Lol
@bigsonslawncare
@bigsonslawncare 4 ай бұрын
Wow Bill sounds like a kids toy😂
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
It winds up pretty fast, that's the best part of store brand weedeaters, they are very tune-able. 😁
@williamclements273
@williamclements273 2 ай бұрын
Surprised your carburetor service did not seem to include a look at the pump side microscreen; lucky it was apparently clean enough for the machine to work.
@GuysPlayingWithTools
@GuysPlayingWithTools 2 ай бұрын
Good catch, I didn't do a good job editing this one. I forgot to mention it. 🙂
@donwilliams5841
@donwilliams5841 4 ай бұрын
How do you attach the wire to the fuel line? Great videos.👍
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
Thanks. I got the line pulling tool when I bought a fuel line set. I sharpened the tip on the grinder and poke it through the end of the taper that I cut into the fuel line.
@lewiemcneely9143
@lewiemcneely9143 4 ай бұрын
What happened to the blue fuel line that folks were bragging about and when my opposed Vanguard acts up I open the jet and return it where it was to start with and that fixes it. Happy weekend and stay cool We got SIX inches from that last storm. Mostly sunny and windy now with passing squals.
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
Sounds like dirt in the fuel of the vanguard. You are clearing it with the jet and then the next bit clogs it again. I would drain the tank and put me lines and filters on, then give the carb(s) a quick clean. 6 inches, that's lot of water. You might be in the market for a boat!
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
Oh yeah, the blue fuel line... I have an opinion about it but I will keep it to myself. Let's just say I am underwhelmed
@lewiemcneely9143
@lewiemcneely9143 4 ай бұрын
@@GuysPlayingWithTools Thanks for letting me know. I hadn't heard but you know how it is when stuff gets bragged on or cussed. You ought to know. Thanks, Pard!
@lewiemcneely9143
@lewiemcneely9143 4 ай бұрын
@@GuysPlayingWithTools The Vanguard had a clean tank and a new filter and an adjustable jet carb ($140) and cleaned before it was put on as well as the vacuum fuel pump rebuilt. It just acts up once in a while. I keep the gas in covered containers and fresh no alcohol stuff at that. Guess the mix is just that touchy. Might happen once a month, maybe. And we're 32 to 3400 feet above salt water so it all runs down from here. Sure gets interesting though.
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
@lewiemcneely9143 Email me, and I will tell you about the dark side of that kind of video.... and you will know exactly why I don't do them. 🤯
@robertmailhos8159
@robertmailhos8159 4 ай бұрын
Another saved weed eater for your making some money 💸 when you sell it Bill 💸💵
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
I lost money on that one, but it's way too nice to let it go to the trash
@robertmailhos8159
@robertmailhos8159 4 ай бұрын
@@GuysPlayingWithTools you got that right Bill 💸 some money is better than no money 🤑
@mr1pearl
@mr1pearl 4 ай бұрын
Like adjusting a Ferrari ain't it crap no emoji with a smiley face with a grill yea..yah 😆 Sure is a lot easier to get that fuel line out of that gas tank then getting a pick out of your guitar 🎸 !!!
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
This one started out running and pretty close to right , I had a husqvarna a couple of days back that I adjusted for 10 minutes. It was fussy. The last acoustic guitar I had sounded like a coffee can full of rocks, there were at least 10 picks in it 🤣
@mr1pearl
@mr1pearl 4 ай бұрын
Jackpot 😅​@@GuysPlayingWithTools
@GuysPlayingWithTools
@GuysPlayingWithTools 4 ай бұрын
Well, I traded down with it right after it was done. I only lost a few bucks, but I got a lot of good Karma points out of it. 🙂
Zombie Boy Saved My Life 💚
00:29
Alan Chikin Chow
Рет қаралды 20 МЛН
Lehanga 🤣 #comedy #funny
00:31
Micky Makeover
Рет қаралды 31 МЛН
Doing This Instead Of Studying.. 😳
00:12
Jojo Sim
Рет қаралды 38 МЛН
Fixing A Craftsman Trimmer That Someone Gave Up On.
15:00
INSIDE HOUSE GARAGE
Рет қаралды 126 М.
Weed Trimmers - Don't Rebuild The Carb!
25:47
Eliminator Performance
Рет қаралды 187 М.
The BEST Craftsman weedwacker carburator adjustment video
10:58
Steve Harris
Рет қаралды 96 М.
Weedeater 101 - The two most common reasons for failure to start.
15:16
DoctorFixMaster
Рет қаралды 463 М.
Craftsman 34cc 4-Stroke Trimmer - Will It Run?
23:31
Eliminator Performance
Рет қаралды 67 М.
Purge Bulb Won’t Fill Up With Fuel? Here's Why!
21:52
Vintage Engine Repairs
Рет қаралды 543 М.