Woodturning 101 - Video 4 - Sharpening Your Woodturning Tools

Рет қаралды 147,154

Күн бұрын

Learn to sharpen your woodturning tools
Do you struggle to get sharp, properly shaped tools when you sharpen? You’re not alone, most woodturners do. Having sharp tools is critical to overall success, ease of cutting, and increased enjoyment.
In this video, Kirk DeHeer will take you step-by-step through the process of shaping and sharpening tools so that your tools cut cleaner, leave a better finish, and reduce the time needed for sanding. All without the frustration and reduced tool life that comes with free-hand sharpening. He will also show you how to re-shape your tools to the correct profile with a simple trick or two.
In our Dale L. Nish Workshop program, we teach students how to create perfectly ground tools using the Oneway Wolverine Sharpening System with Vari-Grind jig in combination with Raptor Set-Up Tools. Together, they offer woodturners simplicity, repeatability, and superior results overall. When you’re done watching this video, you’ll know how to properly sharpen your tools so they are razor-sharp and ready to help you reach your full potential as a woodturner.
Timestamps:
0:00 - Intro
3:56 - Choosing a Grinding Wheel
8:58 - Spindle Roughing Gouges
15:09 - Parting Tools
16:17 - Skew Chisels
18:28 - Skew/Beading-Parting Tool
19:19 - Box Scrapers
22:01 - Bowl Scrapers
23:09 - Negative Rake Scrapers
24:49 - Bowl Gouges
29:23 - Vari-Grind Set up
31:02 - Spindle Gouges
33:27 - Traditional/Bottoming Gouge
35:24 - Dressing a Stone Wheel
38:12 - Profiling a Gouge
40:52 - Dressing a CBN Wheel
- SHARPENING SUPPLIES -
Oneway Wolverine Sharpening System - www.woodturnerscatalog.com/t/...
Raptor Set Up Tools - www.woodturnerscatalog.com/p/...
Vari-Grind Jig - www.woodturnerscatalog.com/p/...
Raptor Grinding Jig Guide - www.woodturnerscatalog.com/p/...
CBN Wheels - www.woodturnerscatalog.com/t/...
Norton 3X Grinding Wheels - www.woodturnerscatalog.com/t/...
Grinders - www.woodturnerscatalog.com/t/...
Apprentice Diamond Wheel Dresser - www.woodturnerscatalog.com/p/...
- LINKS AND RESOURCES -
CRAFT SUPPLIES USA - The Woodturners Catalog
Since 1982, woodturners have trusted Craft Supplies USA to provide them with the finest woodturning tools and supplies. We pride ourselves on providing exceptional customer service and stand behind the products we sell. Our goal at Craft Supplies USA is simple: to make doing business with us so enjoyable that you look forward to doing business with us again.
Phone: 1-800-551-8876
Website: www.woodturnerscatalog.com
Address: 1287 E. 1120 S. Provo, UT 84606
Email: service@woodturnerscatalog.com
Join our Email list for promotions, new products and more:
www.woodturnerscatalog.com/Em...
Download Allan Batty's Woodturning Notes (Free):
blog.woodturnerscatalog.com/20...
Visit our Woodturning Blog for how-to's and more:
blog.woodturnerscatalog.com?
View our Digital Catalog:
content.yudu.com/web/33r4n/0A3...
Subscribe to Craft Supplies USA:
kzfaq.info...
- SOCIAL MEDIA -
Facebook - / craftsuppliesusa
Instagram - / craftsuppliesusa
Pinterest - / woodturnerscat
Twitter - / woodturnerscat
#woodturning #woodturnerscatalog

Пікірлер: 73

@victorvogelsang6350 18 күн бұрын

Reminds men of my high school shop teacher. Great job!!!

@rschelp1 6 ай бұрын

Finally .. your's is the only video to talk about setting the control leg and where the leg needs to be in relationship to the notches. Been looking at video's for hours and not one of them go into this. Nor is it detailed in the Wolverine manual that comes with the tool. Thanks for filling in the missing details.

@Gatorbuc7 Жыл бұрын

One of the best teachers I have ever found

@trynforpar 8 ай бұрын

Finally one of the best video’s I have seen on sharpening techniques using the OneWay Vari-Grind. Your presentation was outstanding and your knowledge of sharpening came out in spades. Thank you!

@RobRobBob 8 ай бұрын

This is great, I really enjoy the focus on safety and the deep content. Thank you!

@m.mccready9976 Жыл бұрын

Best tool sharpening video I've found. Good explanation of the vari-grind jig settings. Thanks so much.

@mikethomforde7326 Жыл бұрын

One of the best training videos!! I’m a fan

@ValioMadre7 2 жыл бұрын

Excellent! Thank you for sharing.

@BigDaddy-us8bk 3 жыл бұрын

Very well presented. I really enjoy your detail to teaching. I now have a better understanding of how to use the Wolverine system. Thanks!!

@danielbohannon302 2 жыл бұрын

Thank you for all those safety tips in our tips and I like the wolverines going to order older one I'm getting into wood turning 1st time ever

@hassanal-mosawi4235 3 жыл бұрын

Thanks for sharing that, and advise!

@alexpo6939 Жыл бұрын

Apart from the tasteful backdrop and excellent light, the quality of the table and grinder stand is a pleasure to look at. And all this is combined with very useful and understandable information for learning wood turning! I'm following your channel! Further success to you.

@remwoodz Жыл бұрын

Excellent and comprehensive instruction

@HandymanJim Жыл бұрын

Best sharpening video I've seen.

@robertmcewen9231 Жыл бұрын

excellent demo, very informative and great presentation! thank you so much

@trynforpar 9 ай бұрын

Excellent course! Thank you

@carolriley8472 3 жыл бұрын

Great video...thanks!

@stevenhansen8641 3 жыл бұрын

Thanks for sharing 👍

@stanjudd2552 3 жыл бұрын

Excellent video .

@larrycoleman2225 3 жыл бұрын

Excellent and well planned out. Thanks for all of the information.

@karledman4625 3 жыл бұрын

Thanks for sharing.

@LocksmithSteve Жыл бұрын

WOW, just the perfect tutorial. Thank you very much.

@CraftSuppliesUSA 11 ай бұрын

Glad you enjoyed it!

@pauldodge9707 2 жыл бұрын

Excellent presentation learned a lot, especially on the Raptor gagues

@CraftSuppliesUSA 2 жыл бұрын

So glad it helped!

@stevendavis6759 Жыл бұрын

Fantastic video Thank you so much for sharing. I had to subscribe once I saw it.

@gnothisauton2116 6 ай бұрын

I learned a lot. Thank you.

@geoffbeere3135 9 ай бұрын

Excellent video learned a lot.. thanks

@gerardoflores9177 3 жыл бұрын

Thank you very useful video

@scottshawwoodworking1752 3 жыл бұрын

Excellent video and the information you gave is invaluable. Thank you

@kenburnette1121 7 ай бұрын

Great infrastructure, you are a good teacher.

@amikochlany6898 9 ай бұрын

thank you for a very informative video .

@cobberpete1 2 жыл бұрын

Thank you for educating me

@CraftSuppliesUSA 2 жыл бұрын

Glad you found it helpful!

@jamesharless5357 2 жыл бұрын

Great video! You are an excellent teacher sharpening all these tools!👍🏻👍🏻

@beardedwoodpecker 3 жыл бұрын

Excellent video i found lots of info thank you very much Ioannis (Athens Greece)

@CraftSuppliesUSA 3 жыл бұрын

Glad it was helpful!

@MERCFANS 2 жыл бұрын

It was useful on the website to have a grinder with all the accessories recommended by your company.😀

@joepapalia-xs1ds 8 ай бұрын

You are really talented. I'll bet you could paint the Mona Lisa with a lathe chisel . Great job.

@gregwaters944 3 жыл бұрын

Good info

@kandiecandelaria3134 3 жыл бұрын

Great info! Just about to hook up my system.

@CraftSuppliesUSA 3 жыл бұрын

Good luck!

@night2beupzip Жыл бұрын

This man is a wealth of knowledge and skill. Thank you for the great video, it was really educational.

@Salmo1960 Жыл бұрын

Great video, when I reprofiled my swept bowl gouges I end up with a bit of a point, do I need to round the gouge more?

@gordonschroyer2392 2 жыл бұрын

Great video and demonstration. I am just beginning to learn about Lathe work and this was very helpful. I do have a question, near the end, you mention a soft cbn dresser. I cannot seem to find this item anywhere. Is there another name for it?

@nevillewomersley7841 2 жыл бұрын

I have enjoyed this presentation, however, what would be the outlay to set a system such was the one shown?

@monopinionestcelle-ci6650 2 жыл бұрын

How have I ever sharpen my woodturning tools for close to 45 years without having throughout that knowledge until now! I'm going with what my father had taught me! Gee! Could you write me the manual angle setting red jig ? I would really appreciate it and will review all your sharpening ways now. I've learned the angles with experience and over the years some mens on several occasions would bring their tools and tested me for différent angles for different tools. They would bet my dad would bed high. On friday nights my dad would take me to the old A&W and get my medium milkshake root beer floaters. The waitresses on their roller blades. So thank to the trip nostalgia. Please tell mr that tool that you skew the tool in and you set the angle you want to sharpen the tool. Thankfully Sylvie

@davidhart524 Жыл бұрын

What grit is near CBN Sharpening Wheel are you using in your video?

@4056yates 7 ай бұрын

What grit is that diamond wheel

@MERCFANS 2 жыл бұрын

what grit is near CBN Sharpening Wheel?

@johnmeeks9618 3 жыл бұрын

How do you know what angle to set the varigrind jig to to get the angle you are wanting to grind?

@alfkey4155 2 жыл бұрын

One way suggests the leg angle should be at 21 degrees ,,. Regards Alf

@skippy5311 2 жыл бұрын

My Wolverine platform is powder coated on the top worksurface, not bare metal as seen in the video. Is it best to lap/polish the platform down to bare metal?

@CraftSuppliesUSA 2 жыл бұрын

Some platforms can be a little "sticky" depending on the brand - we've found that a lapped/polished surface allows you to have a more fluid motion when sharpening skews and scrapers.

@MERCFANS 2 жыл бұрын

it would be useful on the website to make sets of wheels with grinders😁 Missing 350, 600 grit

@shitbird55 3 жыл бұрын

Would wet stones work for sharpening in place of a grinder?

@tylersmith9868 2 жыл бұрын

In turning that answer would be no

@ericmoorehead1100 3 жыл бұрын

How do you determine that your tool is sharp?

@HPCthulhu2011 3 жыл бұрын

You have to sharpen at the primary bevel angle but it has to be sharpened all the way to the very tip of the blade.

@user-zx6xv3rc1v Жыл бұрын

Как много слов и мало дела...🤔

@tjraymer 2 жыл бұрын

Can the raptor system be used for a 40/40 grind?

@billhackley3540 2 жыл бұрын

look up ron brown videos

@rustynuts4426 Жыл бұрын

Thanks for talking me out of sharpening my own tools with a grinder. Far too dangerous.

@paulellsworth7679 4 ай бұрын

Alou-mini-um.... lmao

@MERCFANS 2 жыл бұрын

Raptor Set Up Tool Raptor Set Up Tool 35º

@randymagee735 3 жыл бұрын

where can I find a can dresser?

@randymagee735 3 жыл бұрын

A cbn dresser.

@MikePeaceWoodturning 2 жыл бұрын

You do not dress a CBN wheel

@joelesko1419 2 жыл бұрын

Can you provide input on setting up the different positions/clicks on the One Way Varigrind jig when sharpening different bowl and spindle gouges.

@CraftSuppliesUSA 2 жыл бұрын

The answers are a little complicated to put in a KZfaq comment - if you'd like help please call our technicians at 1-800-551-8876

@squidskunk 3 жыл бұрын

shouldn't this be video 1...a sharp tool is safer to use.

@hswing11 3 жыл бұрын

SOS nothing new