Crank Saver Kit 1695MB1 | Product Overview

Crank Saver Kit 1695MB1 | Product Overview | Unior Bike Tools

Рет қаралды 117,687

5 жыл бұрын

No more problems with stripped pedal mounting threads on the cranks. With the help of our Crank Saver kit you can repair stripped threads and save your beloved cranks.
More info about the tool:
www.unior-bike.com/cgi-bin/cms...
uniorusa.com/shop-bicycle-too...
See all our bike tools:
unior-bike.com/
Unior Devinci factory racing:
www.uniordevinci.com/
More about Unior can be found here:
www.unior.com/
Follow us: / uniorbiketools
Like us: / uniorbike MADE FOR WORK | Forged by the best. For the best.
www.uniorbiketools.com
UNIOR engineer and build bicycle tools for demanding service professionals and we do it in a way that combines old-school metalworking know-how with modern techniques in the heart of Europe.
Website : uniortools.com/eng/category/9...
Instagram : / uniorbiketools
Facebook : / uniorbike
Twitter : / uniorbiketools
#Unior #Bike #Tools

Пікірлер: 42

@saadjan3229 5 жыл бұрын

Wow best tools set. My local bicycle shop told me replace the whole crankset.. But i didnt want to replace my bike original and sturdy crankset with aftermarket parts. So I did little research and found you 😁👍.

@tejasvisam9054 2 жыл бұрын

In bicycle there is no such thing as after market products, including the bicycle manufacturers use other brand carnks itself, there are few reputated brands, if you got with that it will be far better than few crankset that comes with the bicycle.

@cleiton859 5 жыл бұрын

Excelente inovação e tecnologia

@91LX50Mike 3 жыл бұрын

Great product...

@Loudeboss 2 жыл бұрын

Hi all, is there a difference in size between a cleaner tap and cutter tap?

@RhumRunner41 3 жыл бұрын

Is there a kit for 1/2-20 pedals?

@santanadavidcruzhernandez9007 4 жыл бұрын

Donde los puedo conseguir aquí en México???

@solitude8375 2 жыл бұрын

Where to get the bush separately.

@silverwolf469 2 жыл бұрын

What is the size of the helicoils?

@eddiazRd 3 жыл бұрын

Where I can buy this box exactly

@kigztv6127 3 жыл бұрын

how to buy that

@hadisapedah 3 жыл бұрын

Where i buy this tool .iam from indonesia

@rogercapote8930 3 жыл бұрын

Where can i order a crank saver kit

@sebastienpro5174 4 жыл бұрын

How to order this product ?

@jessephillips868 3 жыл бұрын

Do you still sell this kit ?

@reza_dc2 3 ай бұрын

what happens if you rethread and don't use an insert?

@miamontilla8942 3 жыл бұрын

Dónde lo puedo comprarlo

@yurilao9071 Жыл бұрын

Size of tap pls

@saadjan3229 5 жыл бұрын

Wowwwwww

@rtong12 2 жыл бұрын

Question: If I am repairing the left pedal instead (vs. the right in the video), does the coil and threading tap tool go in clockwise also? (I understand for the left side, the pedal tightens counter clockwise). Thank you.

@dtape Жыл бұрын

The coil and tap tool go in the opposite direction for the left pedal. Anticlockwise. That's why there are 2 tap tools and 2 sets of coils, 1 set for each direction.

@patalinghugjosephmarkkent6082 5 жыл бұрын

This kit is not for privateers. This product is aimed at bikeshops. Theres a cheap alternative tho, Helicoil or buying a whole new crankset

@josephliu6071 4 жыл бұрын

Mark, do you know which Helicoil I would need to re-thread my bike pedal?

@patalinghugjosephmarkkent6082 4 жыл бұрын

@@josephliu6071 Theres a helicoil size that is specific to mtb cranks online. In regards to re threading mtb pedals im not sure about that, I think its best to but a new pair or buy a new pedal axle

@sml2238 3 жыл бұрын

I have a question about this. My nee sram xx1 cranks came from the factory with defective threads but there’s none in stock anywhere right now so I’d like to try and fix them with these inserts. However, I also would like to reduce the insert inset on sram xx1 cranks the insert threads are recessed by at least 2mm making some pedals incompatible. Is there a preferred method to fixing this? I was thinking perhaps to use these threads with the pedals in question and 1 washer installed and seat the insert just so the pedals are able to spin freely then remove after cured. Then I was thinking of applying epoxy around the insert to fill the area around the new union insert and the recess on the crank this way the washer will have more surface area to rest against instead of just resting against the nee union insert itself. I hope that’s making sense. Any tips or thoughts would be greatly appreciated. Thank you

@tejasvisam9054 2 жыл бұрын

Xx1 cranks cannot have defects 99.9%, however you could have replaced it if at all it came defected, but its not possible to thread this crank easily as it is carbon crank and already there will be one inserts on them.

@Kdawgyy 2 жыл бұрын

Mines just turning when it gets to the thread part

@fwucku 3 жыл бұрын

At $422 australian. Its cheaper just to buy a few pairs of crank sets lol

@cyklofil7652 Жыл бұрын

I dont think its target is someone who repairs his bike in a garage. I kinda agree that some prices of park and unior tools are outrageus. but as a bike mechanic i can tell you its a tool you need a few times a year but when you do customers are happy to pay a premium for service, theyre glad that theyre able to keep their crank. Money doesnt come with maintenence knowledge so ive seen stripped threads on a brand new multiple thousand $ bikes 🍻

@Stanley88845 5 жыл бұрын

THE KIT IS MORE EXPENSIVE THAN A WHOLE NEW CRANKSET!??!?!?!?!?!

@georgev4898 4 жыл бұрын

@Ian Brown unless you are a bike shop owner/mechanic, why would you ever use this tool more than 2-3 times in your life

@plfodder 3 жыл бұрын

@@georgev4898 I think that's the point.

@alexfernandez7067 Жыл бұрын

So I asked my local bike shop if they re-thread crank levers and they responded yes. Then went on to explain to me that I need to buy a new crank lever and asked me which side was it I told him the right side and he says oh we need to buy a new, crank lever and the whole mechanism like yeah no