Repairing Stripped Crank Arm Pedal Threads

Рет қаралды 188,798

8 жыл бұрын

I fix the stripped pedal mounting threads in an aluminum crank arm. The original pedals had been seized in the cranks (probably galvanic corrosion between the steel pedal axles and the aluminum cranks). I managed to get them off, but they removed some of the threads with them. Using a Unior Pedal Tap and Thread Insert Set, I remove the original thread, widen the hole and put in new threads. I then install the inserts/bushings which will have the new pedal threads. This kit is kind of expensive. If you work on a bunch of bikes, it might be worthwhile. Otherwise, you might want to have it done at your local bike shop if they have the tools. VAR makes a similar set of taps/inserts.
For those who have asked, this is the tool set I used (Unior Pedal Tap and Thread Insert Set):
www.amazon.com/exec/obidos/ASI...
▶ SUBSCRIBE & HIT THE 🔔 bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
/ rjthebikeguy
▶TOOLS
www.rjthebikeguy.com/tools
▶SHIRTS
bit.ly/RJBikeGuyShirts
▶WEBPAGE
www.RJTheBikeGuy.com

Пікірлер: 235

@RJTheBikeGuy 5 жыл бұрын

For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► bit.ly/SubRJTheBikeGuy

@matthubbard904 Жыл бұрын

I have a pair of 3 piece cranks for a bmx bike and the right side pedal threads are stripped what size of tap would I need for it

@luigiprovencher8888 11 ай бұрын

@@matthubbard904 What did you end up doing?

@matthubbard904 11 ай бұрын

@@luigiprovencher8888 nothing it’s gonna cost like 60 dollars to get them fixed there just stock fit indented 8 spline cranks

@luigiprovencher8888 11 ай бұрын

@@matthubbard904 Do you have the original pedals?

@matthubbard904 11 ай бұрын

@@luigiprovencher8888 no there just odyssey petals

@gregsierra414 5 жыл бұрын

Wow, i literally just returned from the shed after stripping a drive side thread on a bike I'm working on. I looked up "pedal thread repair" and was not surprised to find that RJ had the answer. I was surprised though, to see that the cranks RJ had stripped were exactly the same cranks! It made me feel just a little better. Good to know that there's a fix too.

@Jezze90 2 жыл бұрын

I stripped the same cranks as well!

@Mick_T63 8 жыл бұрын

I used the same thing on my 50cc Yamaha cylinder head bolt years ago before the internet was out, it worked great. Glad to see it on your channel.

@toomaful 8 жыл бұрын

Now that's what i call a tutorial video! Well performed & in good quality. Keep up the good work :)

@DZeeSea 5 жыл бұрын

Well done, most places would just tell you to get a new crank arm instead. Love to see you bring old parts back to life in a cost effective way. And the tools can be used again... I've seen stripped threads on aluminum arms many times.

@oivvv9218 Жыл бұрын

true; still Unior brand is kind of expensive ( in my area atleast )

@mahoganysunshine5518 8 жыл бұрын

thank you so very very much! this was extremely helpful. I didn't even know that these thread repair kits existed. I was actually trying to replace the pedal arm on my crank set which has a damaged thread. I sorta stumbled onto your video. Well I think imma go this way instead. especially since its a really nice crank set and it would be a shame to discard it just because of one thread . thanks !!

@Mr321Brian 6 жыл бұрын

Bacon grease will give you a fine clean smooth tapped hole. You can spin the tap clean through at the end to avoid galling the threads or otherwise damaging the threads. This type of thread repair is stronger than the original tapped hole. I could explain why, but then....you get the idea. Great video and thanks for remembering the part about clearing the chip out of the tap.

@roadrider9297 8 жыл бұрын

Great information! Posting the link to the products is a lot of help too.

@djr073 8 жыл бұрын

Thanks RJ excellent demo on installing heli-coils. Recently had some seriously seized pedals on a dated mountain bike. Applied a few drops of kerosene around the thread ends and left over night. Pedals come loose the following morning. Always enjoy your clips.

@joepiol5105 4 жыл бұрын

The inserts RJ used don't appear to be Helicoils. The label on the package calls them "bushings". They appear to be solid inserts. Actual Helicoils are more like springs made from diamond-shaped wire.

@BramBiesiekierski 11 ай бұрын

Heli-coils are a spring shape insert. This type shown looks to be a solid threaded bushing insert. I would suggest a heli-coil style insert would be a stronger repair than a solid insert like these. Although I have not tried either specifically for a crank/pedal repair, (yet). The reason being, when a bolt is put under tension, the tension in the bolt is not uniform. The threads towards the head end will carry alot more of the load, than those further away. Because a heli-coil is effectively a spring, it has elastic properties. Meaning as the bolt puts load into the coil, the coil will deform, both in diameter and length, and distribute that load more evenly from the length of the bolt, into the parent material. This coupled with the larger diameter/surface area from the larger external thread means that heli-coil type of insert is usually stronger than a simple tapped hole of the same size. Especially so when put into softer materials like aluminium and brass.

@BramBiesiekierski 11 ай бұрын

Im only here because I have just pulled the threads from the crank arm on my eMTB. I plan on attempting a repair and have just ordered a heli-coil style repair kit. (Heli-coil is a trade name, but there are numerous other products that function the same.) There are many crank arm thread repair videos on you tube, and they mostly seam to use the Unior brand kit, with the solid inserts. Although I have opted to use a Re-coil brand kit. Which is an Australian company. They have a coil repair kit for 9/16-20 UNEF, both left and right.

@johnnelsen2894 7 жыл бұрын

Thank you bike guy for helping me save my new e-bike. Dumb me when I tried to put a right side pedal on the left side and messed up the threads on the left crank.

@jimihendrix731 4 жыл бұрын

Great video, this procedure is a lifesaver for resurrecting nice old cranksets that are no longer made and too good to throw away. I’ve read the same procedure can be done to restore a stripped out bottom bracket shell but I’ve not seen any videos or resources on exactly where to get the tools/supplies needed to do it.

@RJTheBikeGuy 4 жыл бұрын

I don't know about BB shell. They make threadless BBs.

@jimihendrix731 4 жыл бұрын

@@RJTheBikeGuy I've used threadless bottom brackets and they are certainly a good solution for stripped or damaged bottom bracket threads.However, there are instances in which I would like to be able to use the period correct threaded bottom bracket for certain bicycles to retain originality, congruence of group set, and because a preference for being able to rebuild and dial in bearing preload for a cup/cone BB.

@kenny4128 6 жыл бұрын

my Tiagra crank set did this yesterday. It was $85 for a whole new crank set with different gear ratios so a win win in my opinion.The tools needed to do this (tap tool and pedal replacement kit) was nearly the same cost. I see value in this if your crank sets are over $150.

@joekahno 5 жыл бұрын

When cutting threads on a through hole, I like to keep a brush handy and brush the chips off before backing the tap out. On a blind hole, especially when you switch to a bottoming tap to thread the full depth, re-clamp the work with the open end down so chips don't build up in the bottom of the hole.

@SinnerSince1962 Жыл бұрын

Joe gives solid advice!

@Le_Papa 2 жыл бұрын

This dudes videos is always useful after couple years lol

@deloresg1 5 жыл бұрын

Very informative video, thank you! I was looking for a way to fix the pedal for and exercise bike with a stripped pedal. You video is very good, although I will probably end up having to take it to a pro because I might mess it up. Thanks though :)

@world-wide9136 2 жыл бұрын

Thanks for the video .. left pedal anti-clockwise 👍 . I just fixed it . That tool to make the threads size is 5/8 , that's a little bigger than the 9/16 standard pedal size . And then you will have to buy the little insert adapter 9/16 size as well . Remember you have to specify if you need it for the left or right side because they are all different. As February 23 2022 I paid $26 for both of them on Amazon. you don't need any fancy tool for this .. just the regular ones you have at home and also you don't need that lock tight liquid .. it's just for a bicycle and not for a motorcycle

@SaludfitnessPUNTOcom 2 жыл бұрын

I can't find em on Amazon, any link you can help me for the left pedal?

@world-wide9136 2 жыл бұрын

@@SaludfitnessPUNTOcom put in the search: bicycle left pedal threads..

@fuluk169 3 ай бұрын

Tap size for helicoil is 5/8-24？

@roncooke2188 5 жыл бұрын

Your vice looks a bit wobbly but you managed to cut the threads, the inserts are called hellicoils, i used to fit them in petrol and diesel engines, great job thank you

@AdrianJaden 7 жыл бұрын

wow, i thought i had to buy a new $40 crankset. Thanks for this very informational video! You explained it very well! Thanks so much!

@trekkeruss 7 жыл бұрын

But it is cheaper to buy the crankset, because the Unior repair kit costs over $100. The Unior kit is really meant as a shop tool for a repair business.

@easytiger2912 Жыл бұрын

I know it wasn't the purpose of your video but I was watching I something you said made me realise I was trying to screw the pedal on in the wrong direction. So thanks for that!

@naujaral2131 7 жыл бұрын

Thank you , appreciate the quick response

@MrKotBonifacy 8 жыл бұрын

Just a side note on a choice of lubricant for cutting/ drilling/ tapping aluminium and its alloys - not oil, but isopropyl alcohol (a.k.a. rubbing alcohol) or regular denaturated alcohol (a.k.a. ethanol) is the recommended lubricant (and the former seems to be better than the latter). Also, two pieces of wood (medium-hard to hard) would do better job of hoding the crank steady in vise without leaving any marks on it. A piece of playwood, HDF/ MDF board would also do the trick. (OSB board is not recommended, as it may contain small hard debris, like grains of sand or tiny pieces of rock.) Best, BTC

@norwik 7 жыл бұрын

*Give this man a cookie* or a beer...

@mikesolo1533 6 жыл бұрын

🖒rubbing alcohol,.....the Russians use it to stretch Vodka 😀! Will try! Thanks for your input!

@howdy000 8 жыл бұрын

Great video! Very informative... Thanks for posting it.

@Mi-cha-el-Edward-Lee 2 жыл бұрын

Thank you for sharing this.

@curiosity8435 8 жыл бұрын

many thanks for this useful video. I really need it now. thanks.

@mikesolo1533 6 жыл бұрын

Gr8 vid! Simple & to the point!

@Beenz75 4 жыл бұрын

OMG thank you! Struggled all day to get my pedal back on so thought was threaded, after searching all day for tools to buy or to take to repair shop, I heard you say that the crank arm is LEFT hand screwed so that's why my right handed motion was not working!! Thanks!!

@seanmadeup22 7 жыл бұрын

Awesome video!!! Concisely detailed and informative. Kudos RJ!!! Thanks!

@amnotshure 8 жыл бұрын

awesome!

@kongmoztv2nd76 8 жыл бұрын

what size helicoils and taps needed?

@wut255 2 жыл бұрын

Really appreciate this video! Any worry about having the tap level? Also, would it be a bad idea to use a drill to turn it?

@iscoortiz283 7 жыл бұрын

Thank you so much for this instructional video, very well presented.~ Would this method be suitable for an exercise bike pedal also? One of my pedals snapped off and the thread is really messed up. Many thanks!

@RJTheBikeGuy 7 жыл бұрын

Maybe.

@yutehube7633 4 жыл бұрын

I got a M9000 shifter band clamp that has decided to strip itself at less than the recommended 5Nm. Since that's also a hole all the way through like the crank in this video, this should be a useful video to see how to do it. I was going to get the part replaced since it's still under warranty but what's the point if the new part is going to be a steel bolt going into soft aluminium threads again - I think if it's got a helicoil put in and done properly, it will be stronger than it would be as standard. The question of why Shimano isn't shipping these supposedly top-tier shifter band clamps with a helicoil already in - like they do with their braze-on front derailleurs - is a mystery! Shimano XTR stuff has become cheap and flimsy compared to the old 8-Speed and 9-Speed XTR stuff of the past that was near-impossible to break. Cheers RJ The Bike Guy.

@saadjan3229 5 жыл бұрын

What if right arm threads damaged? Need to replace the whole crankset or still can repair just the arm?

@timothymunday1338 8 жыл бұрын

what if you put some neat acid on the inserts instead of threadlocker?

@photerm7320 3 жыл бұрын

Thank you! I really appreciate this video.

@flor.e.cultura 8 жыл бұрын

What a nice job!!!!!

@philmonk4159 5 жыл бұрын

Good information. That tool and part is very expensive wow. Nice job though.

@RJTheBikeGuy 5 жыл бұрын

For a one off, it's expensive. If you work on a lot of bikes, it might be worthwhile.

@andgolar87 7 жыл бұрын

good video

@SinnerSince1962 Жыл бұрын

RJ, those kits are great, but man are they pricey! The sets I found are over $125! I've never had the need to do this before, and doubt I will again after fixing this one. It's a lot of outlay just for one crank. I think I'll let my shop do the work instead.

@katsuyaeastcoastecho7667 2 жыл бұрын

in need of this kit :/

@ZakarooNetwork 5 жыл бұрын

Thanks Bike Guy

@Mcdude38 6 күн бұрын

Life saver!!! Thank you sir!

@tunaaa5997 3 жыл бұрын

does welding work ?thats the most convenient one for me

@harrogatejohn 4 жыл бұрын

Great video, very easy to follow and understand! Is it possible to reverse the threads on a new right hand crank to fit to the left hand side of a tandem without installing a heli-coil? If not can I fit a left hand heli-coil into a right hand crank? Thanks in advance!

@RJTheBikeGuy 4 жыл бұрын

Probably not. Yes.

@EdzCollectz 7 жыл бұрын

Thanks RJ! Loved the video which was very concise. My right crank pedal threads are so stripped to the point i can insert my right pedal in and take it out without any turning action (basically the threads aren't even locking in on each other). Do you think this method will still be able to fix it? If I take it into a local bike shop, will they do this procedure for me?

@RJTheBikeGuy 7 жыл бұрын

Yes it will likely work. If your local bike shop has the tool.

@kengrimes2428 4 жыл бұрын

GREAT INFORMATION I THOUGHT I HAD A BIGGER PROBLEM TIL I WATCHED YOUR VIDEO QUESTION WHERE CAN I PURCHASE THE BAGS OF INSERTS AND OTHER NEEDED HARDWARE THANK YOU VERY MUCH

@RJTheBikeGuy 4 жыл бұрын

You would be better off taking it to a shop that has the equipment. www.amazon.com/exec/obidos/ASIN/B001PTCKJO/ref=nosim/youtube25-20

@jonevir 3 жыл бұрын

That's a great help. I just need more info of the product.

@neilgoth1974 Жыл бұрын

How about installing helicoil on Shimano crank arm pinch bolts? I find myseld in a situation now that I've stripped those pinch bolt areas as I kept on removing and reinstalling for a deep clean.

@cayso420 5 жыл бұрын

Where can I get all the stuff I need to fix my right arm crank

@RJTheBikeGuy 5 жыл бұрын

If you are just doing one, take it to a shop.

@mananghayakurtmichael175 2 жыл бұрын

What thread insert size did you use on your crank?

@Andre-jp4yt Жыл бұрын

i noticed that all of my aluminum bike cranks will get their threads stripped when using a removal tool? is there a better way to remove them?

@andremoses3735 Ай бұрын

Could you tell me what is the size of the non drive side hiliciol

@yaaboygip 8 жыл бұрын

I do BMX. I just stripped my first pedal. I'll probably strip many more from doing fakies and hops. That causes the most wear on them.

@ashleyleach9762 8 жыл бұрын

This is great video. I have an old Campy left crank arm that I can't throw away even though the threads are wrecked! What was the tapping tool you used?

@RJTheBikeGuy 8 жыл бұрын

+Ashley Leach Unior Pedal Tap and Thread Insert Set 9/16" www.amazon.com/exec/obidos/ASIN/B001PTCKJO/ref=nosim/youtube25-20

@romerozambrano8189 7 жыл бұрын

whats the exact name of the tool you used to twist the pedal tap to create the threads?

@RJTheBikeGuy 7 жыл бұрын

It's a tap handle.

@maxfuzion9789 6 жыл бұрын

were did you pick up the clamp u used on the dummy thread to get extra leverage!!!!

@RJTheBikeGuy 6 жыл бұрын

Not sure what you mean?

@loganebeling9023 8 жыл бұрын

Loved the video! Would you mind linking to that tool in the description of the video or in this comment? Thanks!

@RJTheBikeGuy 8 жыл бұрын

+Logan Ebeling I added it to the comments.

@solitude8375 2 жыл бұрын

Hi, the link you provided no longer have stock. Do you have other link to share with me. Apprecaited.

@abdulqodoosalsowail4486 8 жыл бұрын

Thenk you !!!!

@grigoriofabrosi1638 7 жыл бұрын

Cool that you did it, but cheaper/easier/faster to just buy a new crankset if you don't already have the materials laying around, which you obviously do because you're RJ The Bike Guy.

@meadows408 8 жыл бұрын

I hope I am never facing this problem but now I know how to fix, all I need is more tools! Thx

@RJTheBikeGuy 8 жыл бұрын

+bob meadows More tools is good! :D

@musclemanjoe1 6 жыл бұрын

Did it hold up ..Or did it break again ,,

@mastedi Жыл бұрын

Whats the unior kit & at how much?

@roelsayon4591 3 жыл бұрын

Where we can order the bushing and the hand top.whqt is the exact specification?pls help me..

@RJTheBikeGuy 3 жыл бұрын

Go on Amazon and search for unior pedal inserts.

@stevecaldwell8576 5 жыл бұрын

NICE

@christiangilcase5009 3 жыл бұрын

Can you tell me whats the exact name of that tool you use rethreading the arms?

@RJTheBikeGuy 3 жыл бұрын

Unior Pedal Tap and Thread Insert Set 9/16"

@literoadie3502 7 жыл бұрын

You shouldn't turn the tool backwards when you are cutting the old threads out, running a cutting tool backwards quickly dulls it (the exception being taps to break the chips, no need to break the chips with a reamer or a drill!)

@iamdjsluggo 3 жыл бұрын

Hum? Helicoil’s description tells you to do it exactly like RJ is doing it in this video.

@BramBiesiekierski 11 ай бұрын

As said above, reaming tools shouldn't be turned in opposite direction. Tapping tools (hand tapping) generally should be reversed periodically to break chips. This tool is both a reaming, and a hand tapping tool in one. For the amount of use your likely to see. It probably won't make any difference.

@hugobrown2516 5 жыл бұрын

RJ thanks! What the proper name of the sleeve. Are they on eBay?

@RJTheBikeGuy 5 жыл бұрын

Unior Pedal Thread Insert.

@narongkeo2334 7 жыл бұрын

What is the name of the kit being used for this repair?

@RJTheBikeGuy 7 жыл бұрын

www.amazon.com/exec/obidos/ASIN/B001PTCKJO/ref=nosim/youtube25-20

@Generikid 8 жыл бұрын

Hey,the square taper part on my non-drive side crank is worn and my crank will wobble.Is there any way to fix it?

@RJTheBikeGuy 8 жыл бұрын

Not really. Replace it.

@classydays43 4 жыл бұрын

There was an Odyssey BMX stem that used a single bolt to clamp the stem and handlebar via wedges. It was an ingenious system, but it was a little annoying to get it right. In any case, the bolt threaded in to a spring thread inside one of the aluminum wedges. Why nobody else does this I have no idea, but after dealing with damaged threads on aluminum stuff I wish more manufacturers implemented the system.

@RJTheBikeGuy 4 жыл бұрын

Probably a helicoil.

@Mamudy Жыл бұрын

Do have other link these one is not working

@RixterNow 8 жыл бұрын

Good video RJ! What was that tool you used to clamp the tap with and turn? It have you lots of leverage

@RJTheBikeGuy 8 жыл бұрын

+Rixter An adjustable tap handle.

@Mrscrapiron5 6 жыл бұрын

Unfortunately, the regular 1/2" tap handle you can buy at hardware stores and auto parts stores can't fit this tap/reamer tool, so that adds to the cost of this procedure. I'm lucky enough to have a great LBS owned by friends who let me borrow their tools.

@sarcasmisthelowest 5 жыл бұрын

Thanks, but before I do all that. Because it looks like only the first 2mm looks damaged I’m going to thread an old peddle axel in all the way through from the other side of the crank arm. Hopefully that will clean up the damaged thread on the crank arm enough to thread in the new peddle. Would melting a lead sinker and pouring in the molten lead into the void work ? If lead and bikes are not the ideal mix then how hard is it to get aluminium to melt?

@RJTheBikeGuy 5 жыл бұрын

Aluminum melts at over 1200F. I would say try to get the pedal to fit, or maybe buy a new crank.

@dmorris7500 Жыл бұрын

whats the kit number?

@nagarjunreddy556 5 жыл бұрын

As the tools were expensive i bought a new crank arm, but even in that the thread stripped of 😑, what must be the problem?. And your videos are great helping many cyclists and mechanics 👏👌

@RJTheBikeGuy 5 жыл бұрын

The tool is expensive until you are working on a lot of bike and need to do this often.

@nagarjunreddy556 5 жыл бұрын

@@RJTheBikeGuy even after replacing the new crank arm, faced the same problem.( i think the problem is with something else like pedal,) Can you tell the reasons why this happens(threading stripping) please

@RJTheBikeGuy 5 жыл бұрын

Without having worked on the bike I can't really tell you. I have never had pedal threads just strip out. The case above was due to the pedal threads being seized due to galvanic corrosion, and were ripped out when removing pedal.

@MrThearijal 3 жыл бұрын

So that give the crank extra lifetime, nice

@handsomepat4815 5 жыл бұрын

I bought a used Haro off CL for my son and it looks like they installed the pedals on the wrong sided which stripped the threads. Would you be interested in doing this to his crank and install the pedals or should I just go to a local shop?

@RJTheBikeGuy 5 жыл бұрын

Talk to the guys at your local bike shops. Some may have the tools, some may not.

@milobertrand6085 6 жыл бұрын

Thanks for the great video! You saved me from having to spend $100 on new cranks :-)

@yifanfei8277 5 жыл бұрын

Except the taps are $179 to purchase hahaha.

@quentindarby9959 4 жыл бұрын

It would be better to buy new ones which is sad plus you don't have to do any fixing 🤣

@manolitofrancisco6218 3 жыл бұрын

Can I use metal Glue ?

@gerryvocal5602 3 жыл бұрын

Great vid ! What is the size of the tool that you used ?

@RJTheBikeGuy 3 жыл бұрын

Link is in description.

@gentjanhasani5955 8 жыл бұрын

How much cost the tools in compare to the new crank arms?

@RJTheBikeGuy 8 жыл бұрын

Depends on the crank arms. The tool is expensive but will do multiple cranks arms.

@dhgfffhcdujhv5643 5 жыл бұрын

Soo are these for M14 x 1.25 pedal thread ?

@RJTheBikeGuy 5 жыл бұрын

Most pedals have 9/16" x 20 tpi threads. Pedals for one-piece cranks are 1/2" x 20 tpi. Older French bicycles used a 14 mm x 1.25 mm thread, but these are quite rare.

@whole_rolls_photography6461 8 жыл бұрын

would this work on carbon cranks with aluminum inserts?

@Mrscrapiron5 6 жыл бұрын

NO! But your bike shop can probably replace the insert.

@roncooke2188 2 жыл бұрын

Need a new bench Vice nice video interesting

@service_andrew 2 жыл бұрын

You the BEST!!!! EXCELLENT 👌👌👌👌 PERFECT 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@ratoneJR 4 жыл бұрын

Chain lube is a poor substitute for tapping fluid. Threads need to be completely degreased for threadlocker to be it's most effective.

@justinhart7031 3 жыл бұрын

As I was watching I was thinking the same thing regarding clean up. Yeah, tapping fluid is better. More so though I watched as he applied lube to the pedal threads then using the same finger, you can still see oil on them, to apply the thread lock. When I apply thread lock I usually clean the threads first with degreaser then methylated spirits to ensure proper bonding, especially on what is effectively a permanent threaded insert. Regardless, this is a great video that clearly shows a technical bicycle repair and is done well.

@namdarbolour9890 2 жыл бұрын

RJ is a bit of a "hacker". But his videos are very educational in that he dissecst all the parts of the bicycle for us to see how they work. He also has some nice tips. But we have to correct some of his sloppiness. We can't expect perfection in a video. I also laughed when he put oil on the inside of the helicoil and threadlock on the outside! Once you start screwing everything in, it's all gonna mix! Better to install helicoil in the crank arm first, let it dry, THEN install the pedal with some oil!

@zigman1976 8 жыл бұрын

Ok dude. I bought a bike for my wife and I had trouble installing one of the pedals. I managed to get it in but here we are 6 months later and the pedal fell off while riding. It looks like I crossed the threads and it stripped the threads of BOTH the crank arm AND pedals. It seems I can only find info on fixing one or the other but not one on how do deal with both at the same time. Any ideas?

@RJTheBikeGuy 8 жыл бұрын

Not sure how you messed up the pedal threads. Generally they are like Cro-Mo steel, the arm is aluminum. Sometimes aluminum gets embedded in the steel threads which can be cleaned off. kzfaq.info/get/bejne/j96Eidiot-CzcaM.html Probably the easiest it replace the cranks, and see if you can reuse the pedals.

@fuluk169 3 ай бұрын

Size of tap for helicoil is 5/8-24？

@sebastianpadua8402 3 жыл бұрын

where can i get those tools

@RJTheBikeGuy 3 жыл бұрын

Link in description.

@Bricklinsv1970 8 жыл бұрын

I've had some success with screwing the pedal from the back side of the crank arm

@robertbates7389 3 жыл бұрын

where do you buy the tools from?

@RJTheBikeGuy 3 жыл бұрын

Amazon.com.

@meganfigueredo8404 3 жыл бұрын

I can’t find this kit anywhere...anyone have advice?

@RJTheBikeGuy 3 жыл бұрын

Link in description.

@benhaj7662 3 жыл бұрын

Can l use them for other side where the spindlee came out from bottom bracket?? Thanks

@RJTheBikeGuy 3 жыл бұрын

No idea what you are talking about.

@benhaj7662 3 жыл бұрын

hi..on the crankarm there is two thread hole one is for pedal and another one for bottom bracket lock nut. Can l use those tool both side?!

@RJTheBikeGuy 3 жыл бұрын

@@benhaj7662 This tool has nothing to do with the bottom bracket. And won't work for anything on the bottom bracket.

@wino9NINE 6 жыл бұрын

That kit priced at $111 is a ripoff unless ur running pricey shop, looking at replacement instead

@airwilliam24 5 жыл бұрын

@Yard Sale Dale That's true, but for most people, this is a rare occurrence and only needs to be done occaisionally.

@CCCL350 5 жыл бұрын

For those of us with expensive crank arms (my crank arms cost $480), paying $40 bucks at a bike shop is the best solution. If the cranks are cheap, then replacing would be the best option.

@eddierodden 10 ай бұрын

Hello, is that kit for a 9/16 pedal thread?

@johnwilliamson4511 10 ай бұрын

Probably yes

@maarrkkoozz 3 жыл бұрын

this works on a hollowtech crank arm?

@RJTheBikeGuy 3 жыл бұрын

The fact that is Hollowtech has nothing to do with the pedals!! Are they threaded? Yes. It will work. Think about it!

@dennisblogg 8 жыл бұрын

RJ, what's your take on redoing things you've already video"taped"? I see a lot of channels not redoing old stuff for what seems to be the only reason that they've already done it. But what's wrong with that? I say; keep posting videos on things like wrapping handlebars,wires, tires and all the simple stuff. There's nothing wrong with having 20 videos on wrapping handlebars on 20 different but similar bikes. Newer followers might not want to go back to watch old videos and imho the more the merrier. It would probably be sort of automatic marketing of your channel as well. Whats your take on it? Anyways great channel!

@RJTheBikeGuy 8 жыл бұрын

+Dennis Mortensen I will sometimes do new videos on thinks I have already done. With a newer camera, tripod, lighting etc, I can maybe make a better video. Sometimes I might do stuff slightly differently. I wrap a lot of handlebars. I am sure not going to video it everytime I do it. I try to come up with new things that I haven't do before. Or if someone else has a video of something, I may shoot my own, because mine won't be the same. Different people approach things in different ways.

@neilfroggycrompton2466 8 жыл бұрын

would helicoils fix this problem too? or don't they have reverse threads?

@RJTheBikeGuy 8 жыл бұрын

+neil crompton Maybe. Not sure.

@neilfroggycrompton2466 8 жыл бұрын

would the heli coils hold up the the abuse a pedal gets?

@averydaboy 8 жыл бұрын

+neil crompton you would have to use a 5/8 pedal tap to make the hole bigger then loctite the helicoil to the crank arm, then insert the pedal , and the helicoil+loctite should hold up against abuse, check amazon for all the stuff you need its all there

@neilfroggycrompton2466 8 жыл бұрын

amazon doesn't sell anything to australia,iv'e tried to buy there before & they won't deliver.

@khanara6 7 жыл бұрын

Hi RJ mate, love your videos. Have you ever resolved an issue with the threads of road shoes as I've wrecked mine as they've had too much use and at times been over tightened. Its a really difficult video to find!

@saurabht3540 4 жыл бұрын

My pedal is fine but have issue with the square joint which attach spindle and crank(actually is crank, spindle and a bolt). The crank socket which accept spindle is damaged. I guess the crank slips and ultimately loosen the bolt which keep it all together. is there a way to manage that? it's fine, even if it is a temporary fix .

@RJTheBikeGuy 4 жыл бұрын

That happens when you ride with the bolt loose. Replace it.

@saurabht3540 4 жыл бұрын

RJ The Bike Guy let me confirm, you mean replace the whole crank set, do you? However I am not able to get parts so also let me know if you have any other ideas. I tried to put some rubber-sealing agent and it kept the joint intact for some 15 miles. This time I am going to use some cello tape and heat. Also I might just keep the wrench socket with me tighten the bolt after every 10 miles. Thanks.

@peterjv8748 3 жыл бұрын

@@saurabht3540 Grease on those square taper spindles is what will usually ruin cranks. Shouldn't even let oil from your fingers touch the taper or the crank square. You might try getting the area completely clean and bone dry and use some red Loctite. Probably won't last long though. You do need a new crank arm. If you have a co-op or non-profit bike shop nearby, they probably have a bin on them, for a few bucks each.