Every week there is a " light bulb " moment to take to my garage/workshop. Much appreciated. Inspiration imagination and innovation keeping my developments ticking along at just the right time.

Getting to this late Franco. Another clear explanation. The complex suddenly makes sense. Thank you.

Crankenstein!!! 😂😂😂 Keep it up Franco, we nerds needs you.

These are my favorite videos from you! You’re very good at explaining how to do stuff in detail

Really getting a lot of great information out of this Master Class series! Great videos! Thank you. 🙂

Thank you for doing all that you do. Female lure maker here btw. 😉

Franko great job!! Great to see a nerdy video of someone who gets the whole picture of how baits work. Get your freak on buddy LOL

Love that big school bus lure. Frankenlure

This tidbit on eye position saved me from redesigning a lure completely-I wasn’t getting a good wobble. I moved the eye position down a cpl mm and it’s doing the Macarena now!

Thanks for starting these videos Franco. I have been a subscriber for about a year and it was your videos that started my new hobby. Up here in BC, Canada I don’t the variety of freshwater species that you folks do down south but i have been able to apply some of your methods and ideas to small trout baits with some success but i never had a good grasp on what makes some of these work and others that don’t. This new series has already taught me a lot and I eagerly look forward to more. Wish you tight lines!!

The hero we needed! Thank you!

Excellent, excellent, excellent Sir!!!

Hi Franco ! Great video ! Waiting for next masterclass!

Hi there, just finished to see this nice class 2 and wondering to see the next one!!!!! Take care...

Franco you are a legend! Thanks so much for sharing your knowledge! I am about to start designing a bunch of cranks and this is so helpful!

great!!! thank you so much!!! you managed to get in words,what happend in my head

This helped so much none of the lures I made really wiggled and I now I know why!

More nerd videos! This video is the stuff that makes me scratch my head. I’ve got a few dolphin lures, perch like it.

eagerly awaiting part 3.

The one dislike is from the commercial lure companies.

excellent explanation, good video, greetings ...

Excellent explanations of the forces at work against a lure. I would use the pretty dud as a tool handle, file, rasp, etc.

Thanks for sharing your experience and knowledge! Most lure makers keep all their secrets to them selfs! Very grateful to have learned again so much from you!

This is absolutely awesome !I appreciate your explanations. It really helps me to make a better lure👍👍

Another great class Franco. I am hoping when you cover depth in the next segment that you can get into some discussion on deep dive attributes......I am the subscriber that suggested Crankenstein....My wife was nearby and overheard the audio and went hysterical with laughter. You made our day.........

Very good lessons, keep it up!!!

Franco! You’re the man! I’ve always wanted to know why I make some baits, a lot of balsa baits, and they’re super tight but I make others with seemingly the same body and weight and they’re wide wobbling and erratic. I’m going to apply these line tie details and experiment further! And I can’t wait for the lip angle to depth relationship and weight placement. Those are the three things where In my bait making is just a trial and error. Thanks for the details , please keep them coming!

Another fantastic Master Class Franco! Proud to be a 60 year old “lure nerd”. Thank you for both sharing your knowledge, and doing it with passion. You remind me of the old saying “When a person is on fire with passion people will come from miles away to watch them burn.” I hope your channel tops a million subs to come and watch your passion burn!

I like that high action one :0

Great stuff Franco! Surprised to read that the views go down on instructional videos. There are dozens of " let's hack a lure out of this hunk of wood and paint it pretty" videos - all fluff and no details and they rarely show under water footage so you don’t even know if it swims! You would figure that a video with (real) useful content would get lots of appreciation (and views)! Guess that us " lure nerds" have to stick together eh? LOL! Looking forward to the next video! Take care!

That was very helpful can't wait for the next video

Thanks Franko, that cleared it up with the action... so higher tie on losser action, steeper bib deeper a diving.

Making a crankbait with multiple line tie eyes is actually a genius idea. That would sell out so fast.

Useless lures make great keyrings. I know from experience... Id love for you to do a masterclass on stickbaits/vibes etc and how they swim without a bib.

Great video, excellent ... huge information, explanations, solutions to problems, insight to the construction and the anticipated movement... inspiration...I don't have the words to describe what I earn looking this video (l will see it again and again) Probably iits the point of view of an engineer that excites me (being an engineer) .. grateful.. looking forward your next masterclass. !!!!!!!❤️❤️

Learned a lot from the first and second installment of this series and will definitely be looking for the next notification. TFT.

Great knowledge

That porpoise action looks like a cray

Very helpful I've always found that I tend to get the best action with the line tie at the point of body roll which is typically near the belly line but I found your explanation about center of drag to be very satisfying and insightful, well done!

Very nice as always! Kinda liked that rocking wiggle the modded Jelly Bean had. Wonder what conditioned Bass would think of it? Hmmm? Thank you. All the best!

Love the info, it all helps in the process, I am relatively new to lure making and have made a few duds, but it is all part of the learning process, great video mate 👌👍

Thanks for explaining this! Just getting started in making my own lures vs buying blanks and airbrushing them and this video makes a lot of sense regarding setup of bib and tow eye.

I wish I could achieve that porpasing action ( probably spelt wrong ) That porpasing action would be killer on a multi jointed yabby (crawdads for the USA)

Higher is better hunting action by the way you described it.

Thanks I was wondering how to get wobble

great video! can you explain why your one you keep around to keep you humble is a dud?

Hi Franco! Seeing that lure you showed at the end, the one that didnt worked good, I noticed that the lip angle & position on the body and the position of the line connection screw eye, is almost the same as some lures that I did, that didnt worked either. In my case the lure body was simetrical and the lip slot correctly centered, but it either porpoised or rolled to the side and blew out, or a mix of both. It got fixed installing the lip closer to the nose of the lure. It seems that a steep angled lips, installed further away from the lures nose doesnt work well. Any info about this issue? Did you ever found out what on you lure was the cause of the bad action? Keep the masterclass episodes!!!

👏👏👏

Heat the bill and bend to make a wake bait on your dud

I have such a short attention span I have to watch this 2x playback speed

I was wondering about 2 or 3 lures with no wigle action, but action as you say "horse movement" witch I made a 1-2 years ago :). The lures go to trash of course, but I was wondering how can I achive that strange thing. I tried more weight, less and so on, but never try to change the position of the eye :)

i´ve been trying to fix some of my most beautiful duds, and this gave me some ideas to try out, thanks! did you ever make the next video you talked about at the end there?

Thank you so kindly for all your time and energy that you've put into this channel! I have referenced your videos so many times! I made your Game Changers last week, and they came out looking really awesome! I put big "Stick-o's" on the back from Cabelas, and the lures all three spiral on the retrieve rather than wobble like yours did in the video. I am sure I have something off center or have some of my balance off with the lures, but I was wondering if you have a way to cure that spiraling without scrapping the builds. I love the concept of the Game Changer! Yours on the video look amazing! Could I put some lead tape on the bottoms of them somewhere to help them stabilize and wobble rather than spiral? - Thank you so kindly, Tres

I use my duds as chain pulls on my celing fans, thay look cool.

Hi! Im just starting luremaking and I find your videos very helpfull. I live in Sweden and intend to do a northern pike lipless swimbait and i'd like it to have lots of side to side and belly flash for a slow intake. Could you please do a video with this action and no bib/lip. Thanks either way 🙈

I'd be interested to hear exactly how your "dud" lure behaves. Just by looking at it, I would say that your bib angle needs to be steeper given that it is so far back under the chin. Either that, or move the bib a bit further forward and placing the tow point more toward the nose (this would necessitate making a completely new lure, of course).

I'm absolutely loving these classes. Do you have a email you could share so that me as a new lure builder can come and ask for tips? I am in Sweden, fishing for northeners only, and we have a lousy crankbait market compared to your.. you are lucky if the main lure companies have two or max three crankbaits for pike/Musky and the most famous Swedish one is 22cm. Longer than that doesn't exist. Crankbait has fallen waaaaay out of favor her unfortunately as they have great track records, holding largest pike many many years in a row. I like crankbaits and the ability to really play alot with them to come up with different behaviours. These two clips from you have learnt me more than all I have previously read or heard online. Crankbaits and what you call gliders with tails (we call them jerkbaits..) so it is these two classes I am going to start experiment. I will also be different to other builders as I'll be making mu lures in resin, as that's what I have experience with, and much less fine tree work. But I still need to build in tree before I find models and form that have my wished action. Would love to be able to come in contact with you and maybe send you some baits when I have a model ready? Would love to have feedback from someone knowing the innards of the action. My father is an engineer but he has no time for something like this, mo interest in it either. Best regard, Mathias Kronsell from Svängsta, yes, I live 300m from ABU factory.

What would you consider the biggest issue with blowout? Would you suggest more shallow ballast holes vs 1 deeper ballast hole? Should ballast always go to centerline?

Thank you for the videos they are very helpful, how can i make a manns 25 swim at 13 to 14 feet,is this possible

Can the width of the lip effect the action and dynamic angle? I.E can the width in relation to the the line ties dynamic force on the Z axis cause the lure to constantly say on it's one side until failure and complete lure roll? Two identical lures, one with a square bill and the other with a round bill. The Square bill fails.

Question ❓ Is there a body shape that provides roll to the bait on straight retrieve, WITHOUT a lip?

I know its a bit of topic, but what thickness was your blank on your vid of the 'lazy ike' lure?

This is gold! Great info. So, the line tie should be somewhere close to the center of drag of the dynamic angle. I can eyeball the center of drag of a lure if I look at it from the front and place it in the dynamic angle. The center point of the lures surface that hit the water will be the center of drag. Everything ok up to this point, but I cannot seem to understand this, when I see a steep running deep diver crankbait like for example a DT20. kzfaq.info/get/bejne/j8WfgcaQmtGrnYE.html The line tie seems to be way to low regarding the center of drag during the dynamic angle. Did I miss something? In fact, with deep divers I had some issues with the woobling when building those. I had a few of them that dived, but didnt wobble.

👍👍🫡

This helped so much none of the lures I made really wiggled and I now I know why!