Crawler Canyon Presents: ICFTLS 3(?) first drive of the V-Nix

Рет қаралды 1,780

17 күн бұрын

Fresh from the June 28 livestream, the Canyon finally gets their very own VRD, after having built... a few. Having no desire to slap on another tucked or cab, this one gets a Bitty Design Rock1 cab and inner bits from a Phoenix, so this VRD has a sprinkling of Phoenix in there to make it work. A VRD Phoenix, the V-nix.
Get a Crawler Canyon tee! www.cafepress.com/crawlercany...
Some links:
VRD Carbon alnk.to/g3bkdTX
Fusion SE 1800 alnk.to/aeYkZLZ
Flash Hobby 60kg amzn.to/3RM5pvi
Rock1 cab alnk.to/cwSbKo5
Tusks alnk.to/90z2851
Deeps amzn.to/4bpRW39
RC4GS amzn.to/42hsXL7
GensAce 3800 amzn.to/3I8h4PJ
IG: crawlercanyon
Amazon list: www.amazon.com/hz/wishlist/ls...
The Tire Test Protocol Spreadsheet:
docs.google.com/spreadsheets/...

Пікірлер: 53

@CraigSimons 14 күн бұрын

I love the comment about building a rig so good you get lazy. I see it in full size rock crawlers, and often the solution is as you said, take something less built through an obstacle just to challenge yourself. We do deserve an easy mode from time to time, but as you said, three rigs seems ideal. extreme scale, extreme performance, and the middle guy is your balance point.

@HVT03 14 күн бұрын

If you see that body, you dont expect what it does. If it works as good with a hardbody, Vanquish did THE THING with the VRD kit

@Tyrells_Tiny_Trucks 15 күн бұрын

7:39 My VRD kit works REALLY well on Tusks. I also tend to consider them cheap in comparison to the Prolines I'm coming from (instead of expensive compared to Injoras). I also probably won't be swapping to any comp pins any time soon 'cause, y'know, cosmetic reasons. Long live Tusks.

@Driver86421 15 күн бұрын

I like FJs but not Vanquish's take on it, and boats belong on water, not rocks, so the Bitty Design body gets the thumbs up. Man, that thing just goes. It might be interesting to see how this compares to a Zoku Phoenix, if only there was one kicking around the Canyon....

@derrickhays3627 15 күн бұрын

Gorgeous truck a V-Nix is born! Great combo wouldn't change a thing. Thanks for sharing.

@adam_chevyss 14 күн бұрын

On my Carbon I rotated the spur until it was at the tightest point on the pinion then loosened the screws slightly and pushed it to the opposite side a little and tightened it back down. It made a big difference in sound/mesh.

@Camocrawler2868 15 күн бұрын

That body looks killer! Thanks Mr C now I'm gonna have to order one for my zrd. That rig does what you tell it, just awesome man 👍

@fejwe 14 күн бұрын

IntraVnix De Milo? One of my favorite tiny background jokes in Spinal Tap.

@dkmgm2011 15 күн бұрын

Very unique look. Drives great. Sick rig. 🤙

@rccrawlingaddict207 15 күн бұрын

It has way more FLEX than you typically like, 2% less underdrive than the PRO which is more than you like, yet you're all giddy like a kid with a new girlfriend. Nice build Mr. Canyon man and I can't wait to see the two battle it out in the CANYON....literally.....put them in the "Canyons"!

@ryanalbert5576 14 күн бұрын

Great episode man! Slow clap 🥃

@Steve_J81 14 күн бұрын

I have watched every video you have released, along with the cycling one (even though I despise cyclist) and I have come to the realization that our tastes on what looks good are wildly different 🤣 which is perfectly fine because if everyone liked the same thing the world would be boring.

@themountain59 14 күн бұрын

what is your problem with bikes ??

@Steve_J81 14 күн бұрын

@@themountain59 I don't have an issue with bikes I do have an issue with the morons in my area that choose to ride in the car lane even though they have a bike lane.

@chriscord6524 15 күн бұрын

Vanity is a worthy cause here.

@volksrodden9522 Күн бұрын

I have been thinking about getting one of those Rock1 bodies for zoku straight axle rig,….might have just sold myself on it now

@RiceCrisp320 15 күн бұрын

Idk if I am alone on this but I'm getting a lot of V's in this episode. Makes me think of the speech in V for Vendetta. I'd name him 'V'. Seems fitting to me where the Canyon has a Vendetta against the VRD Stance😂 'V' the anti RTR

@sprather84 15 күн бұрын

I’m so glad you said that about the spur I could not get mine to be quiet. I kept thinking I didn’t know how to adjust my pinion anymore lol you would think you got it adjusted and then you rotated and it would lock up Hella tight on another spot.

@rccrawlingaddict207 15 күн бұрын

Couldn't you center it better manually? Just curious.

@bouncingnoise 15 күн бұрын

it’s possible, just loosen the 3 screws, holding the spur on the eliminator, spin it and center it as good as possible, and tighten the 3 screws. That’s what I did to get rid of the annoying “wow wow wow” noise 😅@@rccrawlingaddict207

@sprather84 15 күн бұрын

I centered it up as much as possible it doesn’t have too much of a noise, but it’s there

@user-ho5vm9rv1e 15 күн бұрын

Does that body have a lil blue in the paint?

@mikeplaysmusicandstuff 14 күн бұрын

Used a small cross wrench in the center nut to center the spur, then tighten the spur bolts. Removed cross wrench and have it pretty well centered. Not as much runout as observed here in the video.

@OGRadGrow 15 күн бұрын

Performs Flawlessly. Nice 👍🏾💯

@rcmanchild9106 15 күн бұрын

Her name was Lola, looks like a Phoenix, walks like a VRD.

@bouncingnoise 15 күн бұрын

I’m really surprised that it improved in stability by adding weight up high😂 but it’s definitely driving different than a stock VRD with a comp body😊👍

@FaithSaraG 15 күн бұрын

What a weapon!

@user-ho5vm9rv1e 15 күн бұрын

Believe it’s also meant for the fordyce Mr.C. Have you seen the piece being sold to go into vrd twin, that will give you FRONT AND REAR dig? Thinks it Ty’s Customs n Colorado. He’s a cofounder of We RC Rock. And an FYI Vanquish is releasing two more kits. VRD Carbon with straight axle and a VS4-10 builders kit! They’ll both be n Trucks of Freedom boxes too. “Rubber Side Down,” you watch Logan don’t you!?!?

@brianmassey7563 14 күн бұрын

well then, we need to add the portal option to the Pro, and then we can compare the same axle type on each platform

@KTMKID450 14 күн бұрын

Mt. trepador needs a over head entrance trepador tunnel sign .....

@DHFHades 15 күн бұрын

very nice, portmanteaus tickle my tism in a pleasant way :)

@DIllybarification 14 күн бұрын

I'd love to see a VRD on the H10 axles vs. a 10 pro. I think that'd be a very interesting battle.

@CrawlerCanyon 14 күн бұрын

As long as turning circle isn't a point of comparison, I guess. The H10 axle turns WIDE.

@phillashford937 14 күн бұрын

The name is Mr. Power Creep to you.

@mikeplaysmusicandstuff 14 күн бұрын

I think my comment may have been deleted because I had a link in it. However, I have a 3Dcults page under MDF-3D with a skid to bolt a VFD Twin into the VRD. I’d love to get your feedback on it! I’ve been running mine for months!

@TheOtherSock-728 15 күн бұрын

Hairy Crawler in the order of a Venix

@JohnCammarota 15 күн бұрын

I like it mr.c doesn't look like the extra 300g. Bothered it to much at all. It obviously did everything you asked it to do. Were the inserts designed for the Tusk and are they weight specific inserts? Did you notice any hang ups on the rear bumper? Looks like it is a good amount lower then the bumper position that comes with the kit. I do understand its needed for that rear cage to clip in. Was just curious if you felt it hang at all. Also not important but wanted to point out the overdrive underdrive is 37% i know. No biggie. Just letting you know for future reference.. good job. Great vid. Peace out...

@stunod-RC 15 күн бұрын

Boom 💥. Let’s go!

@corybenway6562 11 күн бұрын

I like bittydesign bodies but for some reason they missed the mark on this body IMO. Going to be picking up a carbon kit today.

@TheOtherSock-728 15 күн бұрын

Howdy!

@BrandonM83 15 күн бұрын

That body is absolutely beautiful Mr C

@LumpkinMumfins1 15 күн бұрын

I don’t hate that body. Might have to swap my Fordyce for that… but then Coyote Grande… 🤔🤔

@graymatter45 12 күн бұрын

I just ordered one of those bodies for my Phoenix.

@BrandonM83 15 күн бұрын

Hello canyoneros

@charleshurley8927 15 күн бұрын

is that the same color that you painted my spider?

@CrawlerCanyon 15 күн бұрын

The Spider is Tamiya PS-32 Corsa Gray, while the V-Nix is Krylon ColorMAXX 5530 Peekaboo Blue.

@jimbocreationsbu8203 14 күн бұрын

he can be a STEVE - then it is steV-nix

@ydrRC 3 күн бұрын

You could run these on a WRCCA 1.9 Mini class, but you orobably still wouldn't because you can go bigger than these.

@SamStevens-vo9xx 15 күн бұрын

@thindigital 15 күн бұрын

Brethren...

@themountain59 14 күн бұрын

Well..a rather underwhelming build...VRD, fusion, budget servo,Tusks and it runs good...big surprise ....yawn🥱 I really dont like the body but the color choice is ace.