Creality Ender 3 Full Review - Best $200 3D Printer!
Рет қаралды 3,560,774
6 жыл бұрынEnder 3: shrsl.com/413xd
This is my review of the new Creality Ender 3 3D printer. It's a $200 pre-assembled kit that arrives with everything you need to get started. The assembly will take 1 hour, but you will be able to start 3d printing right away. My tests showed that the printer was able to print PLA, flexible, nylon and ceramic filament. The printing quality is world class, sometimes it's impossible to actually see the layer lines! The compact size also made it possible to print at a fairly high speed. Overall performance and affordability makes this a printer that I strongly recommend.
3D models used in this video:
Plier: www.thingiverse.com/thing:291...
Groot: www.thingiverse.com/thing:201...
Vase: www.thingiverse.com/thing:217...
3DBenchy boat: www.thingiverse.com/thing:763622
Flexible frog: www.thingiverse.com/thing:18479
Bike bottle holder: www.thingiverse.com/thing:439490
Venus de milo: www.thingiverse.com/thing:196037
Rocket: www.thingiverse.com/thing:580192
Music:
Childhood - Mike Chino
Andrew Applepie - Nobody Knows
@RcLifeOn 6 жыл бұрын
We are so close to 250K. Thank you for that! 🙏
@vincevanderperre8660 6 жыл бұрын
No problem!❤
@vincevanderperre8660 6 жыл бұрын
What do u think of the Tevo Flash?
@huibvanderveur3015 6 жыл бұрын
RCLifeOn giveaway.... :-)
@supernielsen1223 6 жыл бұрын
You should try the 3de ceramic amazing filament.. I know you have been using the brand before.. You should really try it, gives some amazing results :)
@greenteckgreece5180 6 жыл бұрын
I am from GREECE! !!!!!!!!!
@christopherborawski9202 3 жыл бұрын
I don’t think this man realizes it, but this was one of the very first well done Ender 3 reviews. He convinced tons of people to buy this, jumpstarting the makers movement. ThankYou sir!
@Hazza0001 2 жыл бұрын
130 like no comments 😂
@SametTheFunkyClam 2 жыл бұрын
I'm also convinced to buy
@christopherborawski9202 2 жыл бұрын
@@SametTheFunkyClam Buy it man
@SamuelRodriguez-xz7nm 2 жыл бұрын
@@christopherborawski9202 I got mines yesterday and it has great quality materials but i don’t know what editing software I should use to print stuff
@scazerdude6821 2 жыл бұрын
@@SamuelRodriguez-xz7nm if you've printed before just use what your comfortable using. Like I mainly used cura before getting my ender 3 and still use it for the ender 3 cause it works. If you haven't printed before I recommend starting on cura the start printing almost Instantly then use other slicers once your more experienced
@deqdl3327 6 ай бұрын
Even after 5 years, your video is still helping out a guy like me who's new to 3D printing. Keep up the good work!!!
@ReallyOldOreos 6 ай бұрын
Don't buy the base ender 3 in 2024, buy the newer versions like the ender 3v3 se or ke
@JorgeTorrespluspage 2 ай бұрын
@@ReallyOldOreos May I ask why?
@ReallyOldOreos 2 ай бұрын
@@JorgeTorrespluspage It is outdated and is no longer worth the price of $200 there are better printers in the price range
@n0anime342 5 жыл бұрын
I started printing at school today and I’m addicted now. I need to buy one
@zachowns1023 4 жыл бұрын
Same thing happened to me!
@Azzooooooo 4 жыл бұрын
Lucky!!
@eastskate639 4 жыл бұрын
I bet everyone watch this are teenager
@trijetz3562 4 жыл бұрын
@@eastskate639 you are right
@eastskate639 4 жыл бұрын
I know everyone teen want buy but their parent don't give
@escknx 5 жыл бұрын
This is the way reviews should be done. Great job.
@udemy_course 3 жыл бұрын
kzfaq.info/get/bejne/gr-Znq991bCalH0.html
@cooperd.9660 3 жыл бұрын
based and joker pilled
@woodstoney 5 жыл бұрын
You are to be commended for your very thorough, non-biased and professional reviews. Well done!
@squidwerd1981 5 жыл бұрын
Hands down the most informative videos and highest quality channels for hobbyists on KZfaq...keep it up.
@ericaclark9273 3 жыл бұрын
Dude, this is the BEST review I have seen on this printer, getting straight to the point while still adding a little bit of opinion, keep up the great work!
@theironrealmdd2401 2 жыл бұрын
Thank you for the recommendation. I got mine today. Set up in a couple hrs due to watching my son at the same time. Can't wait to try it out officially.
@DoItProjects 6 жыл бұрын
I really appreciate how thoroughly you test the printers. You video editing is awesome. Thanks for taking the time to put it through it's paces.
@ericgeer9431 5 жыл бұрын
Great review! I was on the fence about this printer, but you've convinced me.
@junaidimalaysia 4 жыл бұрын
oh man you make my day so easy. I'm a beginner searching for 3d printer with low price and good quality printing. And wallah this is good 3d printer. but still searching for more new 3d printer and this is my top list of it.. Thanks man
@claybailey3842 3 жыл бұрын
I’ve had this printer for almost 2 years now. I’ve printed tons of prints and I have had literally no failed prints or problems. I was concerned about choosing the right printer because about how many there are. I am super glad with the results and hopefully I can print far into the future. P.s. I use Prusa slicer to slice my models. I love finding models off of thingiverse and I use fusion 360 to design my own models. This printer is super easy to use and fun for anyone, ever people who are not into robotics.
@angy101rulz 3 жыл бұрын
That's great to hear. I am pretty new to 3D printing and the Ender 3 Pro seemed like a good choice for that price range. So far it's going good and I hope to start designing my own 3d prints.
@AlexGutierrez1901. 3 жыл бұрын
I plan on buying this but what do i need to know? Im im going to be using files how do i go about printing them?
@michaelrohlmann4661 3 жыл бұрын
Hi Clay, i have the anet a6 and im not so happy with that 3d printer what can you recommend for me to buy so that i can print directly?
@angy101rulz 3 жыл бұрын
@@AlexGutierrez1901. So the files are just 3D models, and you have to use a software known as a slicer so it can translate that model into slices the printer can read and print. I use the software Ultimaker Cura, its free and easy to use.
@angy101rulz 3 жыл бұрын
@@michaelrohlmann4661 I recommend the Ender 3 V2 or pro if your looking for a budget printer. It prints pretty good and has a build range of 220×220×250 mm. Great for prints that aren't too large but its a great printer for the money. Cost me about $250 with taxes and a roll of filament i bought separately.
@lucasabreucuritiba 5 жыл бұрын
Dude! I'm really impressed by how well spoken you are, the review was great, you got my like on this video and my subscription to your channel! Keep it up!
@kivenwalters7507 4 жыл бұрын
Well said, and same goes for Me. Even though I'm late to the party. Great Video!
@notdyingsober 4 жыл бұрын
Hey lirik
@The_real_Negan Жыл бұрын
I know this is 4 years later but I just gotta say thanks dude this really helps I was gonna get this and mabye start a business with it but I was reluctant cause I heard some bad reviews but thanks to you I know that this is the best one for me to start thanks dude ✌️
@mrasianassets 5 жыл бұрын
i just got mine last week! i love this thing and have fun making youtube videos with it!
@StardewDrop 3 жыл бұрын
Who else finds 3D Printing timelapses extremely satisfying???
@tucanchicky9130 2 жыл бұрын
Yes
@tucanchicky9130 2 жыл бұрын
I agree
@jeremycbarnhart2305 5 жыл бұрын
Sharp workspace, man. BTW - Truly appreciate the review. Have very little expendable money, but needed a 3D printer for my projects, and I may be purchasing THIS printer (after months of shopping around) because of your review. Cheers!
@TheGoatman666 2 жыл бұрын
Thank you for this I was on the fence about starting with the ender 3 but now I’m convinced
@andrewcornell9985 3 жыл бұрын
Great video! I was second guessing my purchase of the ender 3 until I came across your vid. You answered every question I had about the printer. Thank you! Again, great vid.
@faeriepalace 5 жыл бұрын
3D printer always fascinated me while simultaneously intimidating me... but i want this like now
@cho4d 4 жыл бұрын
i appreciate when people say "hey what's up guys..." because it tells me i'm safe to skip the next 60 seconds of the video. very considerate.
@jakew3 4 жыл бұрын
Wtf are you even talking about? He went on for about 3 seconds. Skipping 60 for no reason (in this case) makes zero sense
@alexanderperez1351 4 жыл бұрын
@@jakew3 Imagine getting mad at a screen
@jakew3 4 жыл бұрын
@@alexanderperez1351 imagine thinking you can read someone's mind but actually you cannot
@alexanderperez1351 4 жыл бұрын
@@jakew3 Imagine replying back and getting mad
@jakew3 4 жыл бұрын
@@alexanderperez1351 cool story bro
@theroyalgypsydiaries4658 Ай бұрын
Excellent video. To the point not dragged out. Clarity and demo. 👍🏾
@Squad21ent 5 жыл бұрын
You never fail to make comprehensive videos.
@tyabrahamse2461 5 жыл бұрын
Thanks you! Exactly what I was looking for! 👍
@QuantumBraced 4 жыл бұрын
This is pretty amazing for $200, wow. I have a few things I need printed and if I use Shapeways it'll cost me about $80 after everything... Almost thinking of just buying this instead.
@SergioNayar 4 жыл бұрын
Very helpful video! I am currently on the market to get my first 3D Printer and you definitely helped me make up my mind! Kudos for that!
@ffiveheadd 2 жыл бұрын
This is the best video I’ve seen in a while. I’ve been planning on buying one recently, and this really helped with decision, thanks!
@danc7023 6 жыл бұрын
Just got my first 3d printer last week . Loving it even though I had to go to garage and make my own parts to make it work. Pretty sure i got a returned printer. Things were already open,parts missing and it got from Hong Kong in 4 days. Not sure if that is even possible. Kinda sucks for getting first printer. On the bright side, i can't stop printing and loving it. My prints are getting better and better thanks to the info in your videos. Thanks !!!
@danielkapel4073 5 жыл бұрын
DAN c just mail the company you got it from
@willmoran5694 5 жыл бұрын
Its always a safer option to get it from amazon, im getting my ender 3 from amazon because i know if something is wrong they will just send me a new one and take the return
@danielshamu8890 5 жыл бұрын
Step 1. Buy a 3D Printer Step 2. Print 3D Printers Step 3. Sell 3D Printers Step 4. Repeat Step 2 & 3
@Shockszzbyyous 5 жыл бұрын
10 BuyPrinter() 20 PrintPrinter() 30 SellPrinter() 40 goto 20
@Drewwy 5 жыл бұрын
@@AppleManiagaming r/woooosh
@AppleManiagaming 5 жыл бұрын
@@Drewwy haha no I get the coding joke DW.
@Veltior 5 жыл бұрын
@@Drewwy r/woooosh
@kakkak89 5 жыл бұрын
Step 5: ??? Step 6: profit
@tornadoagar9667 2 жыл бұрын
Thank you so much for this review, it really helped me get clear on which 3-D printer I want to get since I am just getting into it. I hope all goes well in your life.
@killerkip1 2 жыл бұрын
Purchased my first FDM last week, just setup my ender 3 and starting my first print, thank you for this video, I watched it when it came out and have had this printer in mind for a long time, got mine for $135 lol
@Creality3D 6 жыл бұрын
Cool review!
@karlsonchee2701 6 жыл бұрын
RCLifeOn got notice by senpai
@holski77 6 жыл бұрын
Is the hotend all metal?
@MuhammadAhmad-we5qz 6 жыл бұрын
austin holbrook no the PTFE tube goes down to the nozzle
@Creality3D 6 жыл бұрын
Dear, please contact service@creality3d.cn, we will get to you asap, thank you.
@Shardfyre 6 жыл бұрын
COOLIO!
@TooSmooth 4 жыл бұрын
I'm in the market to buy this model and now I'm sold. LOL Thanks man, I will now sub to your channel!
@jielyu4943 4 жыл бұрын
your video finally ended my two day struggle on choosing a 3d printer. They are having a deal on their website at $190. Hope I would love it.
@lameru32 2 жыл бұрын
Good review and pretty inspirational! Congrats on getting at about 3x subscribers from when you released this video.
@wootle 3 жыл бұрын
Really great video 😃 very well presented, no loud music all the time (the curse of many other vids). I know nothing about 3DP and this stuff blows my mind. The tech is just amazing! This printer you reviewed looks well built! Btw what camera are you using? It's the clearest footage I have seen! 😯
@Sairren37 5 жыл бұрын
I always thought that 3D printers would be immensely expensive for me and out of reach for at least several years without saving up a lot of money. But I could get this on the pay of a part-time job. And with how that flexible filament works, I could really use that for cosplaying! Thanks for the video ^ w^
@melvinramsey9537 2 жыл бұрын
Got one for Christmas ! Very excited , thanks for the review
@zachowns1023 4 жыл бұрын
Just bought mine I’m really excited to start printing things
@kadenthompson6770 5 жыл бұрын
Thank you for making this video, I’ve recently wanted to get into 3D printing and I fell like the ender 3 is a good choice!
@tabzoo7819 3 жыл бұрын
was it a good choice?
@magma5267 2 жыл бұрын
was it a good choice?
@miscl_anon 5 жыл бұрын
"Filament that will last 1/3 the print" when testing their dog file, it actually printed less than half/about a third of the way. 10/10 best estimate
@thomasnewsome5923 4 жыл бұрын
It must fluxuate, because i was able to print all but the last 3 layers
@roscoebaram681 4 жыл бұрын
I printed the cat and still have tons left
@MrCPPG 3 жыл бұрын
I printed the whole maze toy with the included filament.
@miscl_anon 3 жыл бұрын
@@MrCPPG seems I got less filament than normal
@donut_man360noscope7 3 жыл бұрын
thank you for this information
@chrishunter1226 4 жыл бұрын
Dude, I love this guy. He is so thorough. Thank You Buddy!!!!! :)
@Raigurren 4 жыл бұрын
Been wanting one for a while to help with my cosplaying since making small intricate shapes out of foam... Is a nightmare.. Very helpful videos!
@phatmaxi 5 жыл бұрын
You had me at "followable" hahaha
@adamromer3691 5 жыл бұрын
Hey man, great Video! You did mention your print settings for this printer. What were your settings? I just bought one and am looking to get mine dialed in.
@artsyfartsystuff4277 2 жыл бұрын
absolutely a great video :) Thank you so much for you're honest opinion , experience and time. I am soooo ordering this right now.
@guatagel2454 Жыл бұрын
It is 2023 and the Ender 3 WAS the printer for a begginer, and still IS the printer for a begginer. This was a nice review back then and it is still a good review in 2023.
@TempName525 5 жыл бұрын
I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t need it, I don’t I don’t need it, I don’t need it, I NEEEEEEEED ITTTTTTTT..
@NoseyNick 5 жыл бұрын
Come to the dark side! We have benchies!
@Hebdomad7 5 жыл бұрын
Hits BUY NOW button with express shipping. O_O
@Supermie123 5 жыл бұрын
Lol
@karinepereira4702 5 жыл бұрын
😂😂😂
@ItBusinessyoutube 5 жыл бұрын
:) same
@Blobster-td4nv 4 жыл бұрын
I like this guy because when he says "Great design." you know it's not sarcastic
@psilence0 2 жыл бұрын
I’m so glad u were super knowledgeable. U have given me even more confidence to buy one. Thanks
@Softail77us 5 жыл бұрын
I wonder what can be accomplished on an industrial level. This is my first time seeing a 3D printer. Thanks.
@forevergeo3609 3 жыл бұрын
Pretty sure Bugatti was experimenting on 3D printed brakes a while back.
@xyzebruh1083 4 жыл бұрын
I bought this 3D printer maybe 10 days ago as my first printer and i love it!!! I have been running it everyday and have no issues or complaints! I already ordered a glass bed and yellow upgraded bed springs. I already relocated the spool holder to the side and printed a extruder knob. Probably the best first 3D printer anyone should get because it just performs amazing and it is only $200! just blows my mind how amazing this printer is and is like the new anet revolution for budget beginner 3D printers but with far superior print quality then any $200-$300 printer out there. Thanks for your review on this printer :)
@manny-77 2 жыл бұрын
You have the normal ender 3? Because it is a bargain on Amazon and I don't know if the extra money for the pro or v2 are really needed for improve the base printed. This should be my first printer, for experiments and some useful objects to print. But i hope the quality will be good enough to enjoy it and not to recriminate on money not spended...
@xyzebruh1083 2 жыл бұрын
@@manny-77 that was 2 years ago, better option to buy the voxelab Aquila right now
@manny-77 2 жыл бұрын
@@xyzebruh1083 thank you now I'm considering this printer and i see the incredible price despite the ender, maintaining good and maybe superior quality. May I ask you which is better between base, C2, X2...
@xyzebruh1083 2 жыл бұрын
@@manny-77 doesn’t really matter they are both great for the price
@manny-77 2 жыл бұрын
@@xyzebruh1083 today aquila has arrived, 2h to assemble it, tested with aquila test and a whistle from thingiverse... amazing quality, I love it! Only little stringing on test. I'm printing yoda character for tonight. Hehe!
@wobby04 4 жыл бұрын
Crisp clean shots! Really nice work!
@Johan-fw8re 4 жыл бұрын
Thanks for a really good review that felt rock solid :)
@samljones 6 жыл бұрын
I bought this printer about a week ago and all I can say is... *_WOW_* It's my first 3D printer, so I have no reference to any others, but the print quality is absolutely amazing! The frame is sturdy, the instructions and controls are easy to navigate and it takes literally any filament! *And all for less than $230!!!* My only problems were a loose bed and a crushed bowden tube clamp, but there were tools to tighten the bed rollers and a spare clamp was provided. Definitely one of my best purchases!
@fookingsog 6 жыл бұрын
Sam Jones got yours on ebay?...I did too!😁👍🏻
@samljones 6 жыл бұрын
fookingsoc No actually, I bought mine from GearBest!
@josephshubin8465 5 жыл бұрын
Oh yes, it would. Ho scale stuff is small, this would be great.
@matthewwallis794 5 жыл бұрын
Hey! Just wondering if glass beds are available for this model?
@F_Vlad_ 4 жыл бұрын
That baby Groot tho, looks really detailed!
@San_San_Stan_ 3 жыл бұрын
i already wanted this 3D printer for very long, so this review was very useful
@kevinouellette1893 4 жыл бұрын
Wow man! I m glad I found this channel ! Good stuff!!!
@thedelacruz 4 жыл бұрын
Great review. I'm getting one.
@nicholasfeigen2915 5 жыл бұрын
Hey, you mention that you printed nylon on this printer, I would love to see a video on printing with nylon (and polycarbonate) on the ender 3!
@RexVonTerror 5 жыл бұрын
I subbed because of your superb knowledge in filaments and knowing I'd find help through you if needed
@lockdowndad9967 2 жыл бұрын
Just ordered my first printer, got the ender 3. Cant wait!
@silentrice7399 6 жыл бұрын
One day, I will get a 3D printer
@nikhilpai4630 6 жыл бұрын
You should...It's awesome😁
@piccoleitor 6 жыл бұрын
Do it!
@nikhilpai4630 6 жыл бұрын
It is totally worth it!
@JJ-rl3zm 6 жыл бұрын
Silent Rice I got my first one about a year ago be careful choosing one it took me 4 tries of bad printer and returnings to get the right one I am using the qidi tech x one it is 400 us dollars and it is good for its price
@moots27 6 жыл бұрын
same dude, same. and this printer might be it
@mmgross144 5 жыл бұрын
I am glad that I found your channel. This video has helped to educate me. I am a sculptor, and I have been increasingly interested in the potential of these machines. At this price a barrier has been removed. The only other issue is the software...a bit intimidating. Any recommendations for a novice at this type of CAD?
@dauntedfob82 Жыл бұрын
I would recommend using fusion 360 for CAD modelling, it is a free to use software and works pretty well
@rikfoster2167 4 жыл бұрын
Subscribed. Refreshing to see someone just getting on with the subject. Thnx
@SteelLegOfHistory 2 жыл бұрын
I just ordered this one before I even heard of ya I was looking for a channel that talked about 3D Printer’s and saw that you were talking about the one I just ordered it’s my very first one I wanted to have something to do and have a way to keep myself busy look’s like I’ll enjoy your channel be blessed
@lonnie776 6 жыл бұрын
The TMC2130 drivers are great for noise reduction and to help smooth out prints.
@13blackg 4 жыл бұрын
btw their packaging has gotten much better and the latest model has most of the common diy "fixes" already updated and tweaked.
@DestinHubbard 3 жыл бұрын
I got this one for Christmas and this looks awesome I can't wait to use it
@geoffmarriott4387 3 жыл бұрын
Excellent review both in content and especially presentation style - youtubers watch and learn - good job
@WayneEarls 5 жыл бұрын
subbed and ordering one of these printers.
@mountaindewdude76 3 жыл бұрын
Great video buddy! I enjoyed hearing your opinions and thoughts. I've followed your channel for a long time. I remember when you were building planes, using Experimental Airlines build methods. I am actually still using his methods and I'm still loving every flight. I'm finding myself in situations when I would like to have a 3D printer and the Ender 3 has been recommended to me. Now, this particular video of yours is 2 years old. In your opinion, is the Ender 3 still a great 3D printer for beginners? I've never used one. This will be all new to me and I value your thoughts! Take care!
@jakew3 4 жыл бұрын
You make the coolest videos. Self-deprecation is hilarious. New favorite youtuber
@wanala4982 Жыл бұрын
this was like a really good review. thanks man!
@stankfanger1366 5 жыл бұрын
9:41 - Tell Groot to stop doing that to that poor frog.
@Pedro-cm8bh 4 жыл бұрын
Stank Fanger omggg
@Fabian-iy3je 6 жыл бұрын
Excellent Video. Please also review the JG Aurora A5. That would be great.
@ccdbcvtrider1 6 жыл бұрын
I had one of those. arrived broken. returned it. hows that for a review?
@ccdbcvtrider1 6 жыл бұрын
the parts that came broken were the factory 3d printed Z axis supports. the screw holes were stripped and then the piece cracked from one hole to the other. the other issues I had was a faulty heating bed, it didnt heat up, and one one side, the bottom "spring" shaped metal part at the bottom of the z axis, was warped, this allowed the printer head to descend to the built plate, but not rise. I really dont thing all this was damage from shipping. the box arrived with not a single scrape on it to indicate any kind of mis-handling of the unit.
@peak3dprinting988 4 жыл бұрын
Video quality and editing is looking really good Simon!
@TiberiusCat 4 жыл бұрын
Great video! Really helpful for someone like me considering this hobby.
@sprain08 5 жыл бұрын
I wish you would have reviewed the steps and difficulty of leveling the build bed. Definitely a key factor.
@kerbodynamicx472 4 жыл бұрын
1:40 for anyone who had issues getting the belt done...I just got my E3 pro today, and figured quite a while how the belt works... I thought it was short or something
@doncarlton4858 2 жыл бұрын
Great review! Very informative! I've been thinking of getting a 3D printer, but was waiting for the prices to come down. I guess I have no excuses now. I think I'll be getting one!
@ExplorerOfSky 2 жыл бұрын
I think micro center is doing $100 off this one. Im also thinking of getting it
@MartinWyatt 7 ай бұрын
Thanks for the fantastic review, inspired me to pick one up :)
@lobetec314 5 жыл бұрын
Just purchased a Ender 3, waiting for it to arrive :D
@jpuck6221 4 жыл бұрын
How would you rate it so far?
@lobetec314 4 жыл бұрын
@@jpuck6221 its a pretty darn solid machine! Its great for the price, but a nightmare to set up. at the time, I was really inexperienced, and when I tried to do a print all of it was sliding on the plate. turns out I had to adjust it. it took me two weeks to figure that out. thank god it came with a little spool of filament since I was able to calibrate it before my filament arrived. but once I got everything set up, the machine is great! I would recommend if you have the time to set something like this up, but you just want something working out of the box get a monoprice
@jpuck6221 4 жыл бұрын
Lobetec thank you, I’m sure I’ll have enough time to set it up with this quarantine lol. Thanks for all the help.
@lobetec314 4 жыл бұрын
@@jpuck6221 lol happy printing
@Botwire 5 жыл бұрын
I know this video is over a year old but I really would love to know what basic settings were used as well as software. The print results looks absolutely fantastic.
@pipperoooo 4 жыл бұрын
Yeah see I know nothing about 3D printers and was hoping for him to show how you actually set it etc... moving on.
@luciiid 4 жыл бұрын
Would blender be an ok software to use with this?
@aeternumfx 4 жыл бұрын
@@luciiid Yes, blender works well you will also need a slicing software though.
@harrystevens3885 4 жыл бұрын
@@luciiid Best used for smoothies and chopping vegetables........
@barrettt8661 4 жыл бұрын
Could you use tinkercad software with this printer?
@josuenava4555 3 жыл бұрын
Love your video man, I'm considering you buying this 3d printer to start on some ideas. Your video was very helpful 👍👍👍👍
@mazzastan 4 жыл бұрын
I knew nothing about 3d printers and this review was very very useful
@Rudderify 5 жыл бұрын
Ok, I want the Pickle Rick printing plans. Lol
@1bendyta 5 жыл бұрын
wow i just wrote in 3d printer and then i found you and you are awsome so im gone subscribe!!!
@JeremyN1978 7 ай бұрын
Bought one of these for one of my daughters. Santa is bringing it by as this is what she asked for. Thanks for this review. I think I am going to wait to put it together with her Christmas Day!
@NicholasLibby Жыл бұрын
Video after video, hunting for proper details. You tell me about the Bowden system and the power supply in one quick shot. Thank you so much, these other streamers are D+. You are A+ as normal.
@pylenater6248 5 жыл бұрын
Just ordered it! Its currently on sale for $180 us. And they now offer a glass bed!
@XYKelseyyy 5 жыл бұрын
Thank you! I was currently looking at options and they all seemed too expensive, will definitely check this one out !
@jimmymakesstuff6214 5 жыл бұрын
Where is it on sale?
@pylenater6248 5 жыл бұрын
@@jimmymakesstuff6214 gearbest. Currently 29% off
@dripsettt4329 5 жыл бұрын
From where?
@FrancisBautista07 5 жыл бұрын
Did you have to change your nozzle for the nylon filament? I read that the ender 3 nozzle doesn’t work well with the print temps nylon requires. Love you videos! Looking forward to more of them.
@JoeTheSolarGuy 4 жыл бұрын
Thank you for the review, a lot of useful info!
@patfatal 3 жыл бұрын
WOW very nicely done and helpful video mate. Thx for the nice work.
@zee116 5 жыл бұрын
Great videos! I'm planning my first 3d printer but bit confused between Anycubic I3 Mega and Ender 3 i guess the tie breaker would be the flexible filament and filament sensor but can you tell if Ender 3 has the capability to re-start printing from the same spot where it left off after a power failure or due to some other reasons?
@be11thazor 5 жыл бұрын
Another Great Review. Quick question, did you have to upgrade the anything on the printer in order to print flexable, Nylon, PETG, etc. ?
@mako9673 4 жыл бұрын
I want to know how it does with PETG as well. I am very new to 3D printing and looking for my first printer. Some of the stuff I want to print does best with PETG.
@larrydixon4553 3 жыл бұрын
Thank you so much, very informative. You are a very intelligent young man. Happy Trails to you.
@RafsyamHasyemi 4 жыл бұрын
Superb review. Thanks. Fan from Malaysia.
@SlapRoundTheChops 5 жыл бұрын
Newcastle brown ale 👌🏽👍🏽 big shout out from a Geordie
@powerpug964 5 жыл бұрын
I live there too
Made with Layers (Thomas Sanladerer)
Рет қаралды 932 М.