A Boomerang That Never Comes Back

  Рет қаралды 453,223

RCLifeOn

RCLifeOn

3 ай бұрын

This video is sponsored by Brilliant. The first 200 people to sign up via brilliant.org/rclifeon get 20% off a yearly subscription.
3D printed boomerangs are making a come back! This one will be using 3x drone motors with insane power to rotate the boomerang and generate lift by the angled wings. The fast rotation of the boomerang keeps it airborne while slowly, in a large ellipse, making its way back to the original point of take off.
Music:
Racing Hearts - Mattie Maguire
My Feet Don't Work No More - Splasher!

Пікірлер: 691
@Verteenoo
@Verteenoo 3 ай бұрын
A boomerang that never comes back is just a stick
@RYGAR92
@RYGAR92 3 ай бұрын
but this is a very well engineered stick
@Alex_Vir
@Alex_Vir 3 ай бұрын
Nah, it's a boomerang thrown by me.
@jonathancrowder3424
@jonathancrowder3424 3 ай бұрын
A boomerang that never comes back has many names: stick, Dad, gone, sanity, social skills, the list goes on
@awesomegadgetschannel2094
@awesomegadgetschannel2094 3 ай бұрын
😂😂😂
@funnyvidsithink881
@funnyvidsithink881 3 ай бұрын
Actually I have a stick when thrown it always come back die to my dog
@zach_wibble-zn1nf
@zach_wibble-zn1nf 3 ай бұрын
The final product feels like something that would’ve been a dangerous recalled kids toy in the early 2000s
@NicholasRehm
@NicholasRehm 3 ай бұрын
Heck yea more spinny drones! This one is extra terrifying lol
@piconano
@piconano 3 ай бұрын
I love yours.
@marc_frank
@marc_frank 3 ай бұрын
was about to tell him about yours
@marc_frank
@marc_frank 3 ай бұрын
Artur Pekosz also made a monocopter
@IndraKurniawan-vk2qb
@IndraKurniawan-vk2qb 3 ай бұрын
your's better
@graealex
@graealex 3 ай бұрын
About time you get your checkmark from YT.
@Kur0taka
@Kur0taka 3 ай бұрын
4-in-1 escs typically have a built in 5v bec for powering a flight controller, you might be able to replace the rx battery with a second servo plug coming off the esc.
@BLGDrive
@BLGDrive 3 ай бұрын
maybe it fried too
@derrogers
@derrogers 3 ай бұрын
do they?allmost all of my escs feed vbat to the the bec of the FC...
@artur1353
@artur1353 3 ай бұрын
It's hard to change the direction of the axis of an rotating mass (gyroscopic effect), in this boomerang design, the motors rotational axis are changed when the boomerang it's self rotates, so the boomerang is continuously fighting against the gyroscopic effect. So maybe that's why the small one didn't work and it took so much motor power to make it work
@MrSweetHart6976
@MrSweetHart6976 3 ай бұрын
If you put a bearing in the center with a tube and attached a second one on the "bottom" going the opposite way, you might be able to make it hover. And if you slow down the top or bottom motors, it might make it turn left or right. Basically a way over complicated drone "boomerang" but would be cool to see 😁
@I.no.ah.guy57
@I.no.ah.guy57 3 ай бұрын
Hmm very interesting, but sounds pretty plausible to me. And yeah he'd be able to control it then. Idk how the programming and tuning will go though 😅😅
@backyardbasher
@backyardbasher 3 ай бұрын
The FS-i6 will bind to any flysky receiver which uses AFHDS or AFHDS 2A there is a setting in the menu to switch between the two. I have also bound mine to some HobbyKing recievers.
@PaulDominguez
@PaulDominguez 3 ай бұрын
Love it, never felt more suspense or more fear about boomerang. Fortunately cool heads prevailed and no one lost their head
@Prevettspecialdesign
@Prevettspecialdesign 3 ай бұрын
What a catch ! Great project, well done !
@FarmerFpv
@FarmerFpv 3 ай бұрын
You can pull power from the balance lead of the 4-cell lipo for the receiver eliminating the other battery. We used to do that with our FPV drones before the video transmitters were high voltage. It works great. You pull from the connector where 6v comes out for the receiver.
@HawxAnimator
@HawxAnimator 3 ай бұрын
the slow camera sliding in some of these shots is 🔥 adds a lot of depth. great video!
@simplesimon4561
@simplesimon4561 3 ай бұрын
Two things this video has taught me, the countryside in Sweden is beautiful and that making my own RC flying Gamera is no longer just a dream
@herzogsbuick
@herzogsbuick 3 ай бұрын
gamera is really neat! he is filled with turtle meat! we've been eating gaaameeeeraaaaaaa
@simplesimon4561
@simplesimon4561 3 ай бұрын
When did that happen? In the not too distant future? Next Sunday A.D.? Were Joe or Mike there?@@herzogsbuick
@herzogsbuick
@herzogsbuick 3 ай бұрын
@@simplesimon4561 :-D :-D :-D episode 312 baby!!
@simplesimon4561
@simplesimon4561 3 ай бұрын
@@herzogsbuick * High Five *
@Smokkedandslammed
@Smokkedandslammed 3 ай бұрын
I'm glad someone finally stepped up to the plate to make the electric boomerang we've always needed.
@wideyxyz2271
@wideyxyz2271 3 ай бұрын
Excellent work. Great video as always❤
@SullySadface
@SullySadface 3 ай бұрын
He built my dad?
@sombody578
@sombody578 Ай бұрын
Your dad is a boomerang?
@88conway88
@88conway88 Ай бұрын
​@@sombody578his dad never came back
@sombody578
@sombody578 Ай бұрын
@@88conway88 oh
@darkframepictures
@darkframepictures Ай бұрын
It’s not getting milk either
@aesiro13
@aesiro13 Ай бұрын
You threw your dad?
@Jatzuli
@Jatzuli 3 ай бұрын
Really liked this video. It feels better than some of the last ones for some reason!? I always like them all, but this one feels a tiny bit more special
@sUASNews
@sUASNews 3 ай бұрын
Plenty of free flight model helicopters back in the day worked like that. Love the energy, well done.
@nerd20fromdiscord
@nerd20fromdiscord 3 ай бұрын
Your channel is just evolving into actual chaos and im all for it 😂
@ibreakquadframes
@ibreakquadframes 3 ай бұрын
Simon, I also had a problem with my DX6i going full throttle even when I recalibrated the sticks. I upgraded a X9D plus to hall gimbals and used the old gimbals in my DX6i. Worked like a charm and now I have a spare controller.
@David.-_-
@David.-_- 3 ай бұрын
I love when you post bro!!! Keep it going.
@zundappwatercooler
@zundappwatercooler 3 ай бұрын
Great to see you back miss seeing youre videos always inspirating ideas
@I.no.ah.guy57
@I.no.ah.guy57 3 ай бұрын
Dude this was an awesome project and worked really well! Glad to see you getting to a win without a ton of headache lmao. Always love whenever you post!!
@ryanvanderpol7962
@ryanvanderpol7962 3 ай бұрын
Love it! Great project, great video!
@Galileocrafter
@Galileocrafter 3 ай бұрын
4:50 PA: That’s a Flysky FS-i6, don’t cheap out. I am not surprised it doesn’t work… Just get an actually good transmitter, basically anything that runs EdgeTX is ok. I recommend the Radiomaster Boxer, or the TX16S. Also, ELRS for the transmitter and receiver. With Radiomaster, they have an option for a built-in ELRS transmitter. Edit: The FS-i6 is literally the cheapest radio on getfpv right now. For just 11$ more you could’ve gotten a Radiomaster Pocket which is IMHO the waaaay better deal.
@mrb2917
@mrb2917 3 ай бұрын
dude is stuck in 2003 drone tech. doesn't know what a BEC is either, it's wild.
@SaitoGray
@SaitoGray 3 ай бұрын
The price différence for these thing in Europe are quite different.
@FPVin3D
@FPVin3D 3 ай бұрын
Absolutely do this! The mixing and configurabiltiy of edgetx would probably also be helpful with some of these projects. Switching protocols can be annoying, but with elrs you won't have these dropout anymore.
@teodorvangelov
@teodorvangelov 3 ай бұрын
The reason that he can't bind them is because they use different communication protocols, not because Flysky is cheap. There's nothing wrong with the TX.
@Jokl92
@Jokl92 3 ай бұрын
Reminds me of Nicholas Rehm‘s spinning drone. Fun project!❤
@PCMediK
@PCMediK 3 ай бұрын
Awesome video as always! BTW, Google translated "Så jälva klockrent" to "so danm clean"... I get the point!!! Keep it going! 😁
@DominusFeles
@DominusFeles 3 ай бұрын
It would have been so wonderful if google returned “Clean as a clock!” 😂
@tvh4260
@tvh4260 3 ай бұрын
The moving camera during the building timelapse was realllyyy gooddd.
@Rc_nozza74
@Rc_nozza74 3 ай бұрын
Simon love your videos been watching for many years and there always fun to watch
@n1kolodian
@n1kolodian 3 ай бұрын
This is the most terrifying drone I've ever seen. Awesome!
@Creative_Electronics
@Creative_Electronics 3 ай бұрын
Nice video as always Simon :) It's also pretty cool that it really came back!
@benjaminsteakley
@benjaminsteakley 3 ай бұрын
Looks great i love the blue props
@stevesloan6775
@stevesloan6775 3 ай бұрын
Well done on the catch near the end. I live in Australia and I can say there’s heaps of good sports boomerangs you can buy. The are heaps of fun to get your head around. You can throw them so far and so high, with the right wind. 🇦🇺🤜🏼🤛🏼😎🍀☮️☮️☮️
@squeeh
@squeeh 3 ай бұрын
GREAT VIDEO AGAIN - keep up the great work
@kkuenzel56
@kkuenzel56 3 ай бұрын
I will come back like your boomerang and watch more of your videos!
@solder_124dev6
@solder_124dev6 3 ай бұрын
Finally another vid from this awesome channel 🎉
@rcfailing
@rcfailing 3 ай бұрын
Your crazy, love it! Keep it up.
@funcorporatelife2177
@funcorporatelife2177 3 ай бұрын
sick fpv!!! SICK FPV!!!
@segment932
@segment932 3 ай бұрын
Try moving the motors from the wing tips towards the center of the boomerang. In that way the wing tips can have a higher speed, more lift and its get easier to throw. Ha det bra. =)
@xxmortikaixx4975
@xxmortikaixx4975 3 ай бұрын
I had the same thoughts as well as make the wings longer. The motors being near the center will turn the boomerang and the longer wings will act more like a helicopter rotor.
@segment932
@segment932 3 ай бұрын
@@xxmortikaixx4975 Great minds think alike. 🥰
@herzogsbuick
@herzogsbuick 3 ай бұрын
i think the best way to understand what harm can be done by technology is to have access to it. for instance, trying to build things often harms my ego. but seriously, well put at the end there man
@MakeTechPtyLtd
@MakeTechPtyLtd 3 ай бұрын
Great work!
@nanaki-seto
@nanaki-seto 3 ай бұрын
The sound it makes love it Imagine that with lights 4x the size middle of the night all the ufo reports you would cause....
@giacomoferretti3314
@giacomoferretti3314 3 ай бұрын
freaking incredible, you're so smart man, well done. Wanna see more these, let's work
@DonalD1982
@DonalD1982 3 ай бұрын
I really like the type of humor in this channel :)
@georgeaura
@georgeaura 3 ай бұрын
That turned out awesome
@cohnodonnell9747
@cohnodonnell9747 3 ай бұрын
Probably the coolest thing you've made yet!
@joegroom3195
@joegroom3195 3 ай бұрын
Sweet project! I wonder if it can be controlled. Perhaps a servo controlling an aileron to tilt it at the correct rotation angle intervals during flight. Love the spinning transition BTW 👍
@rgbii2
@rgbii2 3 ай бұрын
Nice! Does your setup allow you to reverse the motors? Maybe just before trying to catch it, a quick reversal might make it easier. Also, if it's about to hit something, maybe there would be less damage if it wasn't spinning as much.
@donnienorton7341
@donnienorton7341 3 ай бұрын
Bro this is pretty awesome.look at the first version and now the last version! Continue to critique this idea you might actually have something here! I would like to see a final version that you can throw and will actually come back while controlling with a transmitter. That would be freaking epic. Good luck and thanks.
@boltonky
@boltonky 3 ай бұрын
Actually EPIC. As someone when i lived in Australia got to have authentic ones made an taught how to use them its really an art/science. Keep enjoying yourself cause i will keep watching :)
@another3997
@another3997 Ай бұрын
But authentic boomerangs weren't meant to come back, they were hunting weapons. Not having any knowledge of aerofoils, or the tools to check perfect balance, aboriginals would use trial and error to make ones that flew in a relatively straight and predictable manner. A returning boomerang would be a novelty and fun, but useless as a weapon.
@jggraphx
@jggraphx 3 ай бұрын
Wow nice work looks sick! 👏👏👏👏😊👍
@VictorPoulin
@VictorPoulin 3 ай бұрын
LOVE the way you think and wish we were neighbors.
@civicdude0009
@civicdude0009 3 ай бұрын
That was awesome. Made me think, I bet a dual rotor head boomerang would work better than props on boomerang. Like a dual rotor head helicopter.
@GJToken
@GJToken 3 ай бұрын
Great Video! Some possible ideas for future revisions; - Design it as a 2 part Sandwich to "internalize' wiring and components - Split the battery load onto the 3 arms evenly (ie 3 battery packs) - Modify the wing design to include the pitch angle for more consistent/uniform pitch angles Not sure how feasible, but if you cold program the motors individually you could potentially have full maneuverability and fly it like a "normal" drone
@stevergr9039
@stevergr9039 3 ай бұрын
I absolutely love hearing you speak Swedish when testing!
@hero_rajdeep__123
@hero_rajdeep__123 2 ай бұрын
amazing success
@ianchan2624
@ianchan2624 3 ай бұрын
u r very inspirational! thx for exploding boomberang idea
@N64Overclocked
@N64Overclocked 3 ай бұрын
This is wonderful
@Rudie_
@Rudie_ 3 ай бұрын
Nice one. I would try with longer arms (wings), but the motors closer to the center of the wings (eg. mid-mount). That way the tip speed of the wings will be more than the speed at which the motors will travel.
@yoann_m491
@yoann_m491 3 ай бұрын
I'm an FPV pilot and RC aircraft maker since +5 years. Never seen a guy with the balls to launch a prototype that rotate multiple times every seconds from a stick, 50cm from its face. You could just have no more jaw in half a sec lmao.
@16-BITFPV
@16-BITFPV 3 ай бұрын
Look up the nitro version from the 1960's
@16-BITFPV
@16-BITFPV 3 ай бұрын
I think it was from the company Cox.
@benrawner5218
@benrawner5218 26 күн бұрын
“ I think I have all the information I need” hilarious.
@MrPedrohcf
@MrPedrohcf 3 ай бұрын
8:34 Holly, that's a nice transition
@Tos-Tos-Tos
@Tos-Tos-Tos 3 ай бұрын
Thats awesome man.. 🎉
@grahammcnally4799
@grahammcnally4799 3 ай бұрын
So cool. Always great videos.
@roraraptor
@roraraptor 10 күн бұрын
We have the same expression in Norwegian -> klockrent = klokkeklart. I’d suggest the translation "clear as a bell", insinuating it is flawless or of high quality. This was an awesome project, as usual! ✨
@lukeporter6321
@lukeporter6321 8 күн бұрын
Came to the comments for the translation, thank you!
@nialpmatk04
@nialpmatk04 3 ай бұрын
that thing sounds crazy
@42Hertzer
@42Hertzer 3 ай бұрын
Just brilliant!
@shockload6731
@shockload6731 3 ай бұрын
6:33, my heart. Longest startup I have ever seen
@natebaird
@natebaird 3 ай бұрын
This is a proper Simon Stålenhag level creation!
@markus3013
@markus3013 3 ай бұрын
Wow😂 That Video was awesome!!❤
@rbrood267
@rbrood267 3 ай бұрын
Am amazed that it works
@johnraygun9868
@johnraygun9868 3 ай бұрын
they make a very small voltage regulator to keep from needing the two separate batteries on RC devices regarding the receiver and motor that would possibly help with the weight. I am from the US but the person i seen use it is Kevin Talbot from the UK on KZfaq, he has a lot of good information if you continue developing this he may be a good point of contact.
@lpt2606
@lpt2606 3 ай бұрын
dude's a professional in making things that could absolutely kill a guy. Love it
@mvsmvs8428
@mvsmvs8428 3 ай бұрын
Boomerang are for hunting and killing so he got it right then
@benjaminblakemore9704
@benjaminblakemore9704 3 ай бұрын
This channel is amazing 👏 😂😊
@ianvtonder
@ianvtonder 3 ай бұрын
That was pretty awesome !
@kwad3d10
@kwad3d10 3 ай бұрын
that was pretty cool. congrats
@adilsaleem8846
@adilsaleem8846 3 ай бұрын
Love your camera skills and transition and missing drone helicopter sound 😂🎉
@Eagle01ph
@Eagle01ph 3 ай бұрын
the thing with a boomerang is that it was trailing edge stall (like a helicopter's rotors).. where one side is travelling slower than the other cause its going in the opposite direction the boomerang is travelling.. thats what makes a boomerang tilt to one side... The challenge is finding a way to control the motor speed when its either exactly on the leading edge or the trailing edge... that would give you tilt (and hopefully directional) control
@dnbnetwork3531
@dnbnetwork3531 3 ай бұрын
Powerful!
@mrsillyclips
@mrsillyclips 3 ай бұрын
This is such a cool concept, id love to see a V2 with more controls added!
@ulwur
@ulwur 3 ай бұрын
Check out another Swede: "amazing diy projects" only he makes it full size !
@storkbreath
@storkbreath 3 ай бұрын
I thought about making something like this but with two blades and also a servo that moves the battery slightly in order to change the center of rotation which would alter the flight path. The other way to control it would be to have one motor counter rotating from the other and use torque to alter the flight path. It would also be cool but even more difficult to have the motors pulse with more power toward the forward direction on each half of the boomerangs spin propelling it forward.
@BonesFPV
@BonesFPV 17 күн бұрын
Pretty awesome. Scary AF - but awesome.
@othuertas
@othuertas 3 ай бұрын
Would love to see a studio tour!
@BDtechOne
@BDtechOne 3 ай бұрын
Awesome idea....👍👍👍
@satyamofficall_Me
@satyamofficall_Me 3 ай бұрын
I really enjoyed your video brother
@hessdominguez170
@hessdominguez170 3 ай бұрын
This is honestly the coolest 3d printed rc drone thing ever. All you need is to figure out how to make it fpv lol❤😂
@OrganicGreens
@OrganicGreens 3 ай бұрын
I love watching this channel grow. 77,000 views in 10 hours. Crazy
@Ripclaw67
@Ripclaw67 3 ай бұрын
Sooo Cool!!
@pixartist8190
@pixartist8190 3 ай бұрын
I am stunned that that worked
@valveman12
@valveman12 3 ай бұрын
That was very cool!
@thespencerowen
@thespencerowen 3 ай бұрын
Of course a flysky controller won’t bind with a spectrum receiver. They are completely different protocols
@thatguycarlos
@thatguycarlos 3 ай бұрын
And a very clear indication of his being super cheap.
@Smokkedandslammed
@Smokkedandslammed 3 ай бұрын
You're a different protocol.
@aqua_sakura5021
@aqua_sakura5021 3 ай бұрын
@@thatguycarlosI don’t understand why he can’t just use elrs, it’s cheaper than spektrum and it’s WAYYY better range
@gazvlogs7459
@gazvlogs7459 3 ай бұрын
@@aqua_sakura5021hell yeah! elrs is the future
@twelvecatsinatrenchcoat
@twelvecatsinatrenchcoat 3 ай бұрын
Of course, I think we were all thinking this. Amiright fellas?
@eugenenalpin6058
@eugenenalpin6058 3 ай бұрын
12:55 Ja tror att den närmaste översättningen skulle kunna vara "Like clockwork" Riktigt fascinerande projekt! Det var riktigt intressant att se hur aerodynamiken påverkas om man sätter till energi till en boomerang kontinuerligt
@SunriseKnight
@SunriseKnight 3 ай бұрын
That was impressive
@monum
@monum 3 ай бұрын
The returns on this video must be great!
@CoLiC2
@CoLiC2 3 ай бұрын
Congratulations on the Dishwasher!
@Barco131
@Barco131 3 ай бұрын
i love your videos :D they are so genius funny😂😂
@moquette31
@moquette31 3 ай бұрын
Please, give this man a medal 🏅🏅🏅
@C4reful
@C4reful 3 ай бұрын
when you angled the arms you pointed the motors slightly upwards. now you get more lift drom the wings but they have to fight the motors pushing downwards. maybe try an angled motormount (like 20-30deg) so wings and motors push upwards
@osirisforrest8222
@osirisforrest8222 3 ай бұрын
This is a great idea if you had a controllable and movable weight for steering it would be able to come back, i bet it would make a really cool drone helicopter hybrid
@dcallan812
@dcallan812 3 ай бұрын
the sound at 11:00 😲 great video 2x👍
@WIKUS70
@WIKUS70 3 ай бұрын
Nice now I need a propeller driven propeller
World's First 3D Printed Onewheel With Tracks!
15:15
RCLifeOn
Рет қаралды 181 М.
How Does This Fly With Only 1 Wing?
14:56
RCLifeOn
Рет қаралды 183 М.
Мама забыла взять трубочку для колы
00:25
Даша Боровик
Рет қаралды 1,3 МЛН
Don’t take steroids ! 🙏🙏
00:16
Tibo InShape
Рет қаралды 29 МЛН
КАРМАНЧИК 2 СЕЗОН 4 СЕРИЯ
24:05
Inter Production
Рет қаралды 658 М.
Useful Gadget for Smart Parents 🌟
00:29
Meow-some! Reacts
Рет қаралды 10 МЛН
Real Hoverboard Using Ground Effect! - Floats On Anything!!
20:15
JLaservideo
Рет қаралды 4 МЛН
10 Drone Motors on 3D Printed Boat
10:52
RCLifeOn
Рет қаралды 189 М.
I Made Real-life Airsoft AIM-ASSIST: Aimbot V3
25:19
Excessive Overkill
Рет қаралды 781 М.
I made a mini deathroll... and it's INSANE!
14:13
Maker's Muse
Рет қаралды 1,1 МЛН
How Bionic Wings Are Reinventing Drones
12:26
Ziroth
Рет қаралды 1,7 МЛН
This Car Travels Farther Than You Push It
13:42
Tom Stanton
Рет қаралды 2,3 МЛН
Un-Folding a Quadcopter to Increase Efficiency - Part 1
10:57
Nicholas Rehm
Рет қаралды 520 М.
3D Printed Compression Propellers - IT WORKS!
13:40
RCLifeOn
Рет қаралды 206 М.
Fred Rash's electric circle plane
5:59
joshuawfinn
Рет қаралды 3,8 МЛН
3D Printed Autonomous FPV Shuttle Glider
12:56
rctestflight
Рет қаралды 355 М.
Главная проблема iPad Pro M4 OLED!
13:04
THE ROCO
Рет қаралды 49 М.
СЛОМАЛСЯ ПК ЗА 2000$🤬
0:59
Корнеич
Рет қаралды 2,3 МЛН
M4 iPad Pro Impressions: Well This is Awkward
12:51
Marques Brownlee
Рет қаралды 6 МЛН
How Neuralink Works 🧠
0:28
Zack D. Films
Рет қаралды 27 МЛН