Creality Ender 3 V3 KE vs. Ender 3 V3 SE: The Ultimate Showdown You Can't Miss

Рет қаралды 53,925

Күн бұрын

Dive into the ultimate showdown between the Creality Ender 3 KE and the Ender 3 SE! Are you torn between the two models or curious about the advancements in 3D printing technology? Look no further! In this comparison, we break down everything from print quality, build volume, ease of use, and unique features. Discover which printer stands out in terms of performance, reliability, and value for money. Whether you're a 3D printing enthusiast, a hobbyist looking to upgrade, or a beginner seeking the best entry-level printer, this video has all the answers. Join us as we put these two popular models head-to-head in a battle of specs, capabilities, and real-world performance. Don't miss out on making an informed decision for your next 3D printing adventure. It's time to find out which Ender truly ends up on top!
Creality 3D Ender 3 V3 KE: bit.ly/49lV5B5
Creality 3D Ender 3 v3 SE: bit.ly/3uEacGO
123-3D filament: bit.ly/42O2tCw
Join our 3D printing community Facebook group: / 1233dprintinguk
Have you heard of 123-3D.co.uk?
We offer a huge range of affordable 3D printing supplies to the UK consumer at the best possible prices. If you have any questions about 3D printing or a product that we sell do not hesitate to contact our customer service team - www.123-3d.co.uk/page/help.html

Пікірлер: 48

@eliasmora715 3 ай бұрын

great video.... thanks

@thenanook 4 ай бұрын

Thanks good video!,

@Thepitbull9911 4 ай бұрын

Both Good Printers just Shaky and Unstable. I have modded my SE with Gantry Stabilizers, X and Y Linear RAILS, K1 hotend, and 5015 colling fan. Also took the spool holder off the weak frame. My KE remains unchanged but will be getting Y rails next.

@drafnirs 4 ай бұрын

Congratulations on the video, the best I've seen about the comparison

@123-3D-UK 4 ай бұрын

Thanks!

@Reds3DPrinting 4 ай бұрын

Great video! I will be getting my new core xz ender 3 v3 today! I will be comparing that to a belted z ender 3!

@wleungO1 4 ай бұрын

Nice video! You can buy the Nebula Smart Kit upgrade for the SE which will give it Creality's Klipper like the KE, but itmight need a firmware upgrade first to see the SE. Some other youtubers have shown a modified firmware where root access is known -> so it allows more customisation. (Mine's coming in the mail now).

@123-3D-UK 4 ай бұрын

Absolutely, but the KE would be much better suited due to the linear bearing fitted the the axis, and the price difference is less then the Nebula Smart kit. But it's a worthwhile consideration for anyone who already owns the SE.

@wleungO1 4 ай бұрын

@@123-3D-UKYep - that's a good point. The SE was on sale when I got it, so it was a 'lose-less money' option in case it became a dead hobby. I had never 3D printed before this. Knowing I could upgrade to Klipper later on was a nice-to-have. Although the 500mm max print speed of the KE is something I won't be able to upgrade to cost effectively. (I'll keep an eye out for used KEs or bambu labs in a few years)

@harleyandrews4479 4 ай бұрын

You are a legend

@johnsim3722 24 күн бұрын

I've had the Ender 3 Pro, currently run the Ender 3 Max, what I'd like to know is times for real world printing of an object on the KE by comparison? I regularly do a print that is 8 hours long, what time could I expect on the KE?

@123-3D-UK 22 күн бұрын

Hi thanks for your comment! Standard settings in Creality Print for a 3 Max is 50mms. Standard settings for a KE is 300mms. This means you would be looking at doing the same print in about 80 minutes on a KE. Its worth noting that there are other factors in play like other settings and the model you are printing so this is more of an estimate, but however you look at it you are cutting your print time significantly.

@noobt4eguns 4 ай бұрын

nice video dear friend thank you

@Rgmekanic 4 ай бұрын

How about the new "V3"? compared as well? Awesome vid by the way

@123-3D-UK 4 ай бұрын

We will release another video on the Ender 3 V3 as soon as we have them in stock, as always it will be an honest review 👍

@Rgmekanic 4 ай бұрын

Awesome m8, thank you. I have a CO2 laser, and am wanting to get into 3d printing. With money quite tight its been a hard battle to decide. Competition has gotten so much closer now than a few years ago@@123-3D-UK

@xXIamJAEXx 4 ай бұрын

Personally I would say the SE is better for people who want to tinker and a pi unlocks more features and speed the KE is for people who just want to print faster out the box. The screen should be on the SE because when you have klipper you don't need to touch the print kinda backwards.

@123-3D-UK 4 ай бұрын

I feel the SE is a very good starter machine for anyone wanting to try 3D printng, its easy to set up and very affordable!

@rdtiel 4 ай бұрын

KE can now be unlocked with creality open sourcing it. Im kinda salty about it actually. A year of tinkering and upgrades to klipperize and improve the speed of my ender 3 within a year....and I had it and better with KE for cheaper

@123-3D-UK 4 ай бұрын

@@rdtiel All part of the fun with 3D printing, my first ever printer was the humble Ender!! And Creality had to allow root access for the O/S as its Klipper based, and fully open sourced 😉

@xXIamJAEXx 4 ай бұрын

@@123-3D-UK agreed and then if you want to push it abit further the option is there, first mod on both is 5015 blower might not make it quieter but a more bearable noise.

@pellcorp 4 ай бұрын

@@rdtiel the version of klipper on the ke is old and only partially open source, and customising the ke or k1 is full of gotchas cos creality has not provided source for things like the prtouch load cell etc. an ender 3 V2 and earlier with klipper is full vanilla klipper and I actually prefer my ender 3 V1 over my k1, k1 and I assume ke is pretty annoying, my k1 is fantastic for prototyping cos it prints fast but my ender 3 V1 is easier to tweak. I have an se I am about to klipperise with a rpi, already using octoprint.

@anthonylong5870 2 ай бұрын

The SE has a USB C port and it can be used to connect to a PC so you can send files directly to the SE.

@micver1091 Ай бұрын

The se can use Cura slicer. U.s.b. c. And you can print stricht from your p.c. And it go.s like crazy. Looks at more videos from you tube. It go.s fast.

@chuck2501 4 ай бұрын

1:39 those are linear rods, not rails. I hear that these are kind of springy. (on the SE, NOT in general) edit: I also hear that the frame is too weak on the KE to support the speeds it runs at creating ugly artifacts on some prints.

@123-3D-UK 4 ай бұрын

You are correct, both models have linear rods on the print bed, and the KE model is fitted with a linear rail on the X axis. Regarding the print speed for the KE I would recommend printing at 250mms to get the best results from the machine. My testing has shown this to best the best range for best results 👍

@scruffles87 4 ай бұрын

I have the KE. I find at high speeds the filament spool makes the printer top heavy and rocks the printer around. I've printed a spool holder to sit on the table and it's a bit shocking how much it improved print quality. I'm really wondering why they don't recommend it anywhere?

@chuck2501 4 ай бұрын

I saw another youtuber show that the linear rods are loose and that the bed will rise and fall as it moves making prints near the front look terrible. @@scruffles87

@Forza-Clips 2 ай бұрын

I bought the Ender 3 v3 SE 4 months ago and the no bed leveling is its downfall. the bed came warped and was never able to print normally. I'm trying to return it for another or an upgrade to the KE for wasting my time with a non functional printer.

@123-3D-UK 2 ай бұрын

Our new video testing the auto bed levelling to the extreme on the new Ender 3 V3 series machines is worth a watch. It may be quite eye-opening, [spoiler alert] as it can compensate for far more than many people expect! kzfaq.info/get/bejne/oK6JY6aI0pi1YKc.html

@questionsfrog1918 2 ай бұрын

You will like the Ender 3 v3 KE then,its auto-zoffset is never right,the x gantry is croocked and you can't level the bed. Great pile o garbage

@123-3D-UK 2 ай бұрын

@@questionsfrog1918 kzfaq.info/get/bejne/oK6JY6aI0pi1YKc.htmlsi=c2ZEz8-iGWBUwyjp

@aser7513 2 ай бұрын

@shaunreviewstech2618 4 ай бұрын

Underrated

@seegurke93 3 ай бұрын

Interesting video but your transitions kill my ear drums. jesus.

@BongWeasle 4 ай бұрын

I’ve just boxed up and sent back my third SE. All worked flawlessly out of the box then about 20-30 prints later they just stop working. The Auto Level and z-offset values seem to be wrong as the nozzle is always to high from the bed. Yes you can bring the nozzle down manually but that defeats the purpose of automatic levelling It is also very very fussy about the filament you use. Long story short like many others I’ve bought a Bambu. Creality build quality is awful.

@anthonylong5870 2 ай бұрын

Funny my $1100 Bambu died from an HMS 500.300.2.1 error after 2 months (Bambu told me sorry we dont know why, then ghosted me) but my little $179 Ender 3 SE is just chugging along. Print after print no issues. Even with tpu and silk.....Bambu are made from cheap junky parts

@Racio00 2 ай бұрын

@@anthonylong5870telling your point doesn’t make you right

@anthonylong5870 2 ай бұрын

@@Racio00 I was just stating facts. Its not my "point" its facts about how Bambu printers are and what factually happened to me and 100's of others. The machines are made of low grade parts.....thats not opinion, its fact

@KyleSSamuelson 4 ай бұрын

3:37 video starts. I had to watch up to this point to understand the difference

@TherealSquiffy 2 ай бұрын

potatoe

@Charlesbjarvis 4 ай бұрын

Lol, yeah the "automatic" bed leveling is a farce on these Enders. Especially if you printer came with some high and low spots on the bed. No joke, My Ender 3 pro prints slower but overall does a better job. But this is just my experience.

@123-3D-UK 4 ай бұрын

We have found this to work very well on these models, beginners feedback has been nothing but positive!

@Charlesbjarvis 4 ай бұрын

@@123-3D-UK YT search is your friend, many people are experiencing the same issue. Hopefully Creality addresses this issue. Also, Creality has issued a video on their website showing the manual leveling procedure. My word of advice is, don't always believe the hype. All and all, the print is priced so great and has so many features, you can't go wrong if your just getting into 3D printing.

@questionsfrog1918 2 ай бұрын

Le reddit is le full of people with issues on their KE Out of 10 people that bought it,6 have confirmed issues ranging from self destroying hotends,magic x gantry of +2 in every direction,auto z offset "calibration" with random results that are NEVER right Paying 280-350 for that heap of broken dreams is an insult

@Charlesbjarvis 2 ай бұрын

@@questionsfrog1918 its generally a pile of poop, I will say this though, I did get 1 nice organic print from it. The test print provided by Creality lol