A Faster 3D Printing Creality Ender 3 Pro With Linear Rails!

Рет қаралды 7,663

Күн бұрын

Hey there, 3D printing enthusiasts! Welcome back to the Jedovi 3D Channel. Today, we're diving into an exciting upgrade for our Ender 3 Pro: installing linear rails with Creality's Linear Rail Kit on the X axis.
In this video, we'll guide you through every step of the installation process with easy-to-follow instructions. From unboxing the kit to mounting the rails, we've got you covered. But the big question remains: is it worth it? We'll answer that by conducting a before-and-after speed test using a Benchy print, showcasing any improvements in print quality and speed.
But wait, there's more! We'll also address an often-overlooked aspect of 3D printing: resonance. Using Creality's Sonic Pad, we'll test the resonance on both the X and Y axes, highlighting any differences brought about by the new linear rails.
So, if you're curious about taking your Ender 3 Pro to the next level and want to know if the linear rail upgrade is the right move for you, join us for this informative and hands-on journey. Don't forget to hit that like button and subscribe for more exciting 3D printing content. Let's get started!
#crealityender3 #ender3pro #ender3upgrades #3dprinterupgrades #crealityprint #creality #creality3D #jedovi3d
Support the Channel for new content and materials:
www.paypal.com/paypalme/my/pr...
For all of our products, Visit:
www.jedovishop.com
Creality Ender 3 X Axis Linear Rail Guide Kit - amzn.to/48ZJaaR
Creality Products - shareasale.com/r.cfm?b=201599...
Get extra 5% off Creality Products sitewide use code: SASALL5
Music by D-Kel - dkelmuzik@gmail.com:
distrokid.com/hyperfollow/dke...
Anycubic Kobra Max amzn.to/3vsziIH
Creality K1 amzn.to/3RWwwTS
Creality Ender 3: amzn.to/3Sn2Gbk
Creality Sprite Extruder Kit: amzn.to/47Whq6x
Creality Dual Z-Rod and LED Light Kit: amzn.to/3UqqUE7
Creality PEI Sheet: amzn.to/49jwe09
Timelapse Camera: Logitech C920x HD Pro Webcam amzn.to/3Hh26Xk
Camera: Nikon D7000 DSLR amzn.to/48QPMJd
Lighting: Softbox Lighting Kit amzn.to/3vC1qcA
Lens: Nikon AF-S DX NIKKOR 35mm f/1.8G Lens with Auto Focus for Nikon DSLR Cameras, 2183, Black amzn.to/41YejJX

Пікірлер: 42

@matto3956 17 күн бұрын

Now getting back into 3D printing after troubles at home had put a stop to it. Before getting the Ender 3 pro up and running, I am gonna give it some upgrades. Currently have the CR touch on order. Thanks for the videos to give me some more ideas. Keep up the great work from the UK 👍🏻

@JeDoVi3D 14 күн бұрын

Thank you so much!

@mattnewcomb2113 20 сағат бұрын

just saw that you were fairly new to youtube. this is good stuff! i look forward to seeing more in the future!

@JeDoVi3D 10 сағат бұрын

Thank you Matt. Glad you like the video

@emv143 Ай бұрын

Glad to see someone else still rocking the OG/Pro Ender 3! Might I suggest going for the Belt Driven Ender 3 by KevinAkaSam for Switchwire-like performance. :)

@JeDoVi3D Ай бұрын

I am going to do a live build of an Ender NG once I print and gather all of the parts

@Flubber2.0 Ай бұрын

I see you still level your bed manually. In klipper there is a very useful feature called screw tilt adjust which is very easy to configure. It will probe above the bed leveling screws and tell you how moch to turn them!

@JeDoVi3D Ай бұрын

Hey there. Yea I’ve been using that command recently. It definitely is a major time saver!

@Jim_One-wl4ke Ай бұрын

Thanks Flubber..I just got klipper. I am also doing manual bed leveling😂. Thanks for sharing ❤

@Jim_One-wl4ke Ай бұрын

Just tried..it works 👍yeah. On my machine is Screws_Tilt_Calculate type on the console. 0.02,0.01,0.03..Thanks bro ❤

@KuroSanArts Ай бұрын

I just did this mod but with a different kit that had extra adapters for my direct drive setup. While the installation was really easy, I did take on the fiddly task of cleaning all the engineering gunk off the rail and the carriage, including all the bearings. re-lubricated and put back together and it feels like it's just floating on air but absolutely rock solid stable! I'm sold on them now so will be upgrading the Z & Y over the next few months as well. :)

@JeDoVi3D Ай бұрын

Absolutely. They move so smoothly after the upgrade

@Reds3DPrinting Ай бұрын

pretty cool, This is like the final mod I have to do on my E 3 neo

@JeDoVi3D Ай бұрын

Thanks. It’s going to be the final mod to all of my bedslingers

@-EK- Ай бұрын

Nice Video! Little tip with the bed calibration. If you run Klipper setup screws_tilt_adjust that thing saved me so much time. Anyways, I'm ordering X and Y Rails now. That will pretty much max out my small ender 3 v2

@JeDoVi3D Ай бұрын

I’m definitely going with the Y kit soon. I’ll do a step by step when I set it up. The screws_tilt_adjust is an awesome tip. Thanks for sharing it ❤️❤️

@godspeople81 Ай бұрын

Great video, good production !!

@JeDoVi3D Ай бұрын

Thank you so much. I’m glad you liked it

@Dalroth Ай бұрын

I put a linear rail on the x axis of my S1 Pro. This combined with better cooling took my printer from borderline junk to a halfway decent machine.

@JeDoVi3D Ай бұрын

It stepped it up, right? This can still be good printers with some work. I’m going to be building an Ender NG live on this page once all of the parts come in. Make sure to check it out!

@CJGilliam 2 ай бұрын

Thanks for a great video.

@JeDoVi3D 2 ай бұрын

Of course. Thank you for the great comment. I’m glad you liked the video!

@kylestyer8240 2 ай бұрын

Love the video.

@JeDoVi3D 2 ай бұрын

Thank you so much Kyle!

@rogersmith258 Ай бұрын

I'd like to see a video on the details of that test, might be helpful in diagnosing issues I have been having with my printers lol. Keep up the good work man!

@JeDoVi3D Ай бұрын

Thanks Roger. I’ll put a video out soon on the resonance test and I’ll put my slicer settings in the description

@LarryBerg 2 ай бұрын

Great content. 👍

@JeDoVi3D 2 ай бұрын

Thank so much. Glad you like the content!

@WLDORPFELD Ай бұрын

Very helpful. Well done on the video. I'm considering a two-head printer as I print parts for an artist's easel I manufacture. The parts have cantilevered portions that require support, so I'd like to have a second head to print the water-soluble supports. Any suggestions would be appreciated.

@JeDoVi3D Ай бұрын

Glad you found the video helpful. When it comes to multi colored printing any Bambulab Printer with an AMS unit would be the best bet. As long as you go with BambuLab filaments and and water soluble filament, you should have a seemless experience printing with them. The AMS unit is sensitive to the size of the filament roll and can get jammed. Solutions to using other filaments are printing adapters to place around your rolls, rerolling aftermarket filaments in a bambulab roller or modding the AMS unit. I know that’s a lot of info lol, but I want you to have a successful experience.

@chentips1852 22 күн бұрын

Bro, you got a new subscriber! Can you show us how to tune ender 3 for fast printing running klipper? there are many tutorials out there but having one single crash course video with calibration prints to run, would be amazing!

@JeDoVi3D 21 күн бұрын

Absolutely!! I got you. I’m working on a few things with the AnyCubic Kobra Max Right Now, but I definitely will create Klipper/Calibration Video. For the Ender 3! Thank you so much for joining the journey!

@Factory400 Ай бұрын

The best upgrade I made for my Ender 3 S1 Pro was converting it to an artificial reef in the bottom of the Pacific Ocean. 😂

@JeDoVi3D Ай бұрын

Lol. There are so many efficient printers out of the box these days, the old Enders seem like a waste of time, but if you got one, you can still make it rock! But I feel you, lol!

@andrewwatts1997 Ай бұрын

This looks sick ! I still have pom wheels on the X and Y axis, but i upgraded the Z axis to be belt driven. BRO, I cannot convey the emotion I felt after the first print after that mod!! No more Z banding, No more Z hop issues, it's smooth and works like a charm. If you upgrade the Z axis too, get rid of the rods and go to the belt side of life ;) All the other axis are belts anyways !

@JeDoVi3D Ай бұрын

Belts definitely seem the better path for the Z axis. Thank you for the info